Problem with OpenManage integration for vCenter - OMSA status: update required
Hello
We have a problem with the configuration of OpenManage integration on a vSphere 5.5 U2 Cluster. We have deployed IMO for vCenter v 2.3.0 build 290 aircraft, and we have installed manually OMSA VIB v7.4.0.2 on our 5.5. U2 ESXi hosts.
The question we face is respect for vSphere host - when we start the Wizard "Fix Non compliant vSphere Host" it displays the correct version of the OMSA - 7.4.0.2 but OMSA status is "required update".
Whe test us the connection to hosts using "Test the connection profile", it hangs at 0% and will be never finished.
Also in the OpenManage integration in vSphere Client "Frimware" tab option is grayed out.
Please indicate how we can make this work?
Concerning
Milan
Well, I did some research more and found that ESXI 5.5 U1 and U2 don't are not supported by OMSA right now.
ESXi 5.5 U1 and U2 are supported only for the OMIVV on the servers of 12th and 13th generation who are capable of out-of-band management and require no OMSA must be installed on the host system. We intend to add a supported of the OMSA version at a later date.
Thank you
Tags: Dell Tech
Similar Questions
-
How to change the MOB OpenManage integration for vCenter Server registration
A few months back, I've updated our installation of the vCenter for v2 plugin, now called OpenManage integration for vCenter Server. When you perform the upgrade, we have kept the old base done vs a new installation. During the upgrade process, we deployed the new device under a new name of the computer.
Everything works well except that we noticed an annoying thing. Registration of the plugin is the former name of the server instead of the name of the new server-oriented. It is validated by looking at the web page MOB: http://vcenter Server/fmt drilling then down through:
Content--> Extension Manager--> extensionList ["com.dell.plugin.OpenManage_Integration_for_VMware_vCenter"] --> server--> URL string
The configuration of the appliamnce shows the correct new name of the device and the administration console is accessible via the new name for the device. The only place where we see the old name of the device is in the MOB config.
We tried to remove the plugin and added, but still cannot change the value of server URL to reflect the new name of the device. Until we solve this problem, I work around the problem by keeping just the DNS entry for the old name of the server in DNS.
Anyone know who to change the property MOB for the URL of the server?
I solved the problem.
I found the following article that shows how to upgrade the extension. I just cut and paste into my current values with the URL of update and now all is good.
-
Problem with webcam integrated for Inspiron 15 3521
Hi, I have a problem with the webcam on my Dell Inspiron 3521. Dell Webcam Central does not detect the webcam the webcam does not work. I checked in Device Manager > imaging devices and I saw the Webcam integrated, even if the icon is grayed out. I tried to update the driver software by right-clicking and selecting "update driver software".
It's the State of the device:
Currently, this hardware device is not connected to the computer. (Code 45)
To resolve this problem, reconnect this hardware device to the computer.
The webcam worked before in the past however over the last week, the webcam works sometimes and doesn't work after that I restarted my PC. A few days ago the webcam has stopped working completely.
Cam_Huynh,
Code 45 Currently, this hardware device is not connected to the computer. - Reconnect the device to your computer
Recently install you / reinstall the operating system? If so, have you installed the Dell System Software (if applicable) and the first chipset drivers? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct
Windows 7/8 is supposed to provide the drivers of webcam for most Dell computers. If you system needs webcam drivers, go in driver downloads & enter your service tag, and then select your operating system. If your system is in need of drivers for the webcam, they will appear under entry.
(Windows 8) How to make the webcam work with the help of this youtube. You must open the firstcamera app, and then click settings in the charm bar to see where you can give the app permission to use the webcam.
Try to read...
Troubleshoot the Dell Webcam and the Dell Webcam Central software
You can try this file, also known as the Dell Webcam Central.
Create a new unrestricted user account and try the webcam. The webcam worked?
If Yes, sign out and sign back in to your account and try the webcam. The webcam worked?
If not, then the webcam is detached from the motherboard, usually close to the webcam
Rick
-
When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
Installation package. A program required for this install to complete could not be run. "Help, please.Hello..
Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC
-
Are there any known problems with external battery for iPhone 6 s karim?
Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.
I had heard that some may damage internal parts of the phone.
I am interested in what Apple says rather than what says karim.
Thank you.
Jkim99 wrote:
Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.
I had heard that some may damage internal parts of the phone.
I am interested what said Apple rather than what it says karim.
Thank you.
There is no Apple here in this technical forum from user to user.
-
There is a problem with this Windows Installer package. A program required for this install to complete, could not be executed. This appears when trying to update
Repair Apple Software Update of programs and features, Control Panel, and then try again.
If not for general advice see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.
More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.
Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.
TT2
-
Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STAFF. "What should I do? I am new to Iphone! If you could help me on this, it would be very appreciated...
aarruunn, you might want to try Windows Installer Cleanup utility.
http://www.MajorGeeks.com/files/details/windows_installer_cleanup_utility.html
-
I have a problem with my password for my MSN account.
I'm having a problem with my password for Windows Live. It does not recognize the sensitive passwords case. I asked cela before and you refered me to Windows Live. And I give them credit. They tried several times to fix my problem and failed. Then they refered back me to you. And guess what, you refered me to Windows Live. I'm stuck in limbo between you two. CAN SOMEONE HELP ME WITH MY PROBLEM PLEASE? PLEASE... PRETTY PLEASE...
This is a forum for issues relating to security, privacy and user for the Windows XP operating system accounts.
Post Windows Live questions in the appropriate forum found here:
http://windowslivehelp.com/ -
Windows Installer package error
When installing iTunes I get a message error "there is a problem with this Windows Installer package. A program required for this install to complete could not run. "I downloaded Windows Installer 4.5, rebooted and tried again with the same results. How can I fix?
Hello
Important The Windows Installer Cleanup (MSICUU2.exe) utility that was previously referred to as in this article has been abandoned. Although the Windows Installer Cleanup utility solved a few problems installing, it sometimes damaged other components that have been installed on the computer. For this reason, the tool has been removed from the Microsoft Download Center. program install and uninstall problem solving
(http://support.microsoft.com/mats/Program_Install_and_Uninstall)is a replacement for this utility.
"The problems with programs that cannot be installed or uninstalled.
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And see if this information helps you install iTunes:
"Not to install iTunes or QuickTime for Windows"
http://support.Apple.com/kb/HT1926
«Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»
http://support.Apple.com/kb/HT1923
If the advice already given does not, please contact Apple for assistance.
"iTunes support-how to use iTunes.
http://www.Apple.com/support/iTunes/
"Contact iTunes Support.
http://www.Apple.com/support/iTunes/contact/
Or ask in the community Apple iTunes:
https://discussions.Apple.com/community/iTunes
See you soon.
-
Original title: after recent update, the installation software WONT work properly! Help!
- I am in desperate need of aid. I didn't something again on my computer, but these recent software updates. I've recently updated my my itunes and from itunes then will opens not or install it. It was working fine before that was last updated, but now used. I tried to uninstall several times, in a variety of versions. Still nothing. Is not specific to the user and system wide as well.
I get a message saying "there is a problem with this windows package install." A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ".
Anyone know what I need to do? Or how to fix it?
Hi MxGurl,
If this occurs after the installation of update Itunes, then go to the following link and check if it helps.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
http://support.Apple.com/kb/TS1717
If this does not help, you should contact Apple support or post in the Apple discussion forums.
http://discussions.Apple.com/category.jspa?categoryID=149
You can also check out the following link and try the steps by Suresh I Support Microsoft, moderator and Andre.Ziegler and check if this may help
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
- I am in desperate need of aid. I didn't something again on my computer, but these recent software updates. I've recently updated my my itunes and from itunes then will opens not or install it. It was working fine before that was last updated, but now used. I tried to uninstall several times, in a variety of versions. Still nothing. Is not specific to the user and system wide as well.
-
Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2
I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.
Thank you
Hello
Please join Microsoft Community where you can find the necessary information on Microsoft products!
You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.
The problem may occur if some of the components of the update are corrupt.
What is the full error message that you receive?
I suggest you follow the steps mentioned below to check if the problem is with the update components:
Method 1: Reset the update components
See the site:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: Run the system update readiness tool
See the site:
System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008
http://support.Microsoft.com/kb/947821
Method 3: Turn off the antivirus software
See the site:
Disable the anti-virus software
http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
Original title: problems during the installation of products on vista with error message that indicates:
I need help ASAP please! I tried to install the new Itunes software and my Vista laptop just will not let me... any ideas.I have download the new iTunesSetup and click it to start the installation process and the process begins. After 2 minutes, the following message appears:
"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package.
I already did:
- "To manage my computer' on automatic rather than manual
- Guests of controls too and still no change
This has been going on for about a week or two now, and I really need help.Any ideas or help would be appreciated.Thank youHi once again, fortunately today I bring better news! As a result of a serious lack of assistance from Apple themselves, have no idea of "The Tech Guys" in the world PC and extremely unnecessary hours at Microsoft, I've sorted it me. In other words, the main problem with mine was the Apple Software Updater. Even with "Revo" I was unable to remove it. I decided to download "Windows Installer Clean Up" from there where I could find (it was also free!). I used it and immediately found, I could choose the Apple Software Updater and remove it with very little hassle in all. I proceed to download the new iTunes, and I'm a very happy Bunny! Thanks for nothing, Microsoft and Apple! Hope this helps - Dan
-
I tried to update my ipad to the latest version of the software, but I couldn't be updated without the latest version of iTunes. So I tried installation but then right, when I arrived at a certain point it to install it, I got this message:
There is a problem with this Windows Installer package.
A program required for this install to complete could not be run.
Contact your provider to support personal or package.
I have dealt with this problem for several hours now, without solution. I feel like I've tried everything. Please help me.CPU info:Windows Vista Edition Family Premium(32bit)Windows Vista (Service Pack 2)Windows install 4.5Please help, it drives me crazy!Try to re - download and install again. Also, make sure that your username does not contain special characters.
If this does not help, try to contact Apple for assistance.
-
I have Windows Vista with Service Pack 2 installed on my system. I am trying to install a small program. The installation process starts, but soon, I get the following error message: Error 1720: there is a problem with this Windows Installer package. A script required for this intall to complete could not be run... How can I solve this problem?
Try the steps mentioned in the answers marked by kmlure and Imran Chand at the following link: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/error-1720-there-is-a-problem-with-this-windows/0b965fe8-2d16-498c-bb88-395911e13146
If you have downloaded the program, you can try to download it again or check if there is a different place, you can download it since the file itself is not the problem.
-
connection network card
my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat
Hello
Did you change your computer?
I suggest you to follow the links and check out them.
The problems of Internet connection
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
Solve problems, find wireless networks
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
Windows wireless and wired network connection problems
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
Maybe you are looking for
-
Papiamentu add on not available for version 34.0 why?
Indeed
-
I have 31 Thuderbird on Ubuntu 14.04. I try to install Lightning and the Add-ons Manager indicates that 3.3 lightning is his own version. If I put it open by Thunderbird, download translates into Thunderbird attempts to send an email with lightning -
-
HP Pavilion TX 2136 G6: "AMD Catalyst Control Center" does not
"Advanced Micro Devices, Inc. - Display - Radeon (TM) HD 7670 M "Download size: 106.4 MB. After that this updated AMD catalyst controller stops working and apps like Youcam and will not launch games. Please help me with this problem. Thanks in advanc
-
History of measurement PREV on XY-graph
Hello! The system where countinously measure same points over and over again. These points are in the result of the measurement on the y-axis and the x-axis. I added two different solutions I tried. 1 where is the buffer memory (based on the example)
-
How to increase the time that the viewfinder display is turned on (T3i/600 d)
Hello! This seems to be a very basic question, but after searching for the manual and the web, I can not find an answer. When I press and release the shutter, the camera button turns on the viewfinder screen that shows the shutter speed, openness, in