Problem with optical drive SATA with ESX 3.5 on HP Proliant ML 350

Similar Questions

• X 300-problem of optical drive

  The DVD on my X 300 (Win XP) drive has stopped working. It does not appear in my computer.

  Device Manager says «Windows successfully loaded the device driver for this hardware, but does not the hardware device»

  BUT if I reboot with the rescue CD in the drive, the BIOS detects the CD OK and runs.

  Why Windows won't see the player?

  Finally, well I gritted my teeth and reinstalled XP.

  Of course the optical drive is now here again. And now, I'm busy to reinstall all my applications and data backups.

• Can cling to the blue SATA port on the Mobo for optical drive SATA HDD

  Studio XPS 435 t/9000 Office

  Service Tag:

  This box has the following motherboard in it.

  X501H Dell Studio XPS 9000 435 t LGA1366 Intel X 58 + ICH10R DDR3 motherboard series

  There are (5) SATA ports on the internal motherboard.

  
  SATA1, SATA2 - blue color Code, I (1) optical internal drive attached to the SATA1

  SATA3, SATA4, SATA5 - black color code, I (3) HARD drive connected 3,4,5

  The blue color SATA2 port is open

  Can I connect a 4th HDD SATA blue SATA2 port?

  Or are the blue SATA ports only for optical drives

  It will cause some problems if I hang a 4th HARD drive SATA2 port blue

  Hi rgadawg,.

  Welcome to the community.

  Blue SATA2 port must be compatible to connect to another hard drive. He should not ask any questions however, Studio XPS Installation Guide Page 57 under specifications says he has three bays for hard drives SATA 3.5 inch disk.

  http://Dell.to/YbYwib

  Thank you & best regards
  Mustapha S
  #iworkfordell

• Problem with ESX 4 running VMS on ESX 4.

  I followed a guide, and I do not see the virtual ESX host once installed.  I already have 3 VM on the main host with 2 available network card.

  I created the configuration of ESX virtual host as a 2 - processor, 2 maps, 2 GB, 200 GB drive

  ESX 4 installed fine, but I can't ping or connect IP address.

  Thank you!

  Dan

  Verify that the setting for the mode promiscuious group switch or port on your physical esx server to which you connect to your ESX virtual server is set to "Allow" of security, it is not the default.  It should look like the screenshot attached.

  ---

  If you have found any of my reviews useful please consider giving points to 'Correct' or 'useful '. Thank you!!!

  www.beyondvm.com

• Problems with ESX VSphere Enterprise license more

  Hi, I have a host ESX 4.0 with 2 processor that is running under eval. I bought 2 x 1 processor license (I'm told that you can not buy a 1 x processor 2 licenses, you must purchase a separate license for each processor).

  I downloaded the keys, but when I entered I get the error "the entered license key doesn't have a capacity of this entity).

  I'm guessing it's because vSphere knows the host with two processors, but I can get only one key at a time by the processor he does like this?

  Hi Matt,

  If you have two keys, you should be able to combine your licenses in a single key. Go to the website of VMware license portal web and generate your new key.

  It will be useful.

  Concerning

  Franck

• Star Wars h.e. 15-an000nl: optical drive Swap with a ssd will void the warranty?

  Hi all

  I am a proud new owner of this machine, and since it comes with a 1 TB hard drive 5400 RPM and I am also a happy owner of an SSD, I was wondering if the optical drive with the ssd Exchange void my warranty?

  I read a little the other q / a and I see that if I try to reach the drive, with all the screws and the cover plastic to raise, I'll probably end by unsecured (actually is not very clear if it's for sure or I'll use a ssd tested non hp...) and since then to remove the optical drive , I just remove a screw, buy an adapter and you're good to go...

  So my question is: what limits should I beyond the warranty for you? It's just the opening action itself, or there is more?

  And since I write here, optical drive sata port is a sata3 as (I hope) the hard disk it is? Would you recommend this operation?

  Thanks in advance for any assistance received...

  The optical drive is an authorized user of replacement so you can put an SSD in an optical caddy and will not void the warranty but I do not recommend: 1. the interface is slower; and 2. You cannot start it. Unfortunately, access to the internal hard drive space is verboten and may void the warranty. We can speculate and say if it's done well, nobody would know and likely HP won't guarantee, but we can get official word on this, so the smartest thing is to assume the worst. If you don't care the guarantee and want just your laptop to be quick, we are happy to help you with the understanding that you risk the warranty.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Optical drive is not recognized in Windows 8.1 (x 64) or in the UEFI System Diagnostics.

  Description of the problem:

  Optical drive is not recognized in Windows 8.1 (x 64) or in the UEFI System Diagnostics.

  Steps to recreate:

  UEFI:

  1. Start the PC in diagnosis system UEFI (F2 at the STATION)
  2. Pane controls
  3. Optical drive
  4. Sequential control
  5. Error: Optical drive not installed.

  8.1 Windows (x 64):

  1. Run Device Manager
  2. Error: No CD/DVD Drives section.
  3. Search for new hardware changes nothing.

  Relevant system specs:

  Mobile: HP Pavilion 15-n023sa (construction of vanilla)

  Optical drive: HP DVDRAM gu70n

  Steps already taken to solve:

  • Replaced the DVD drive with one of the similar specs of HP Pavilion. The replaced gn70n perfectly in the other machine. No change on problem laptop. Conclusion: DVD player works, and there is no problems with Windows 8.1 (x 64).
  • Removed DVD player. Restarted the computer. Sign in to Windows. Stop. Replace the DVD drive. Start the laptop. This is trying to solve defects of material with the PnP devices; more help to solve any problems of intermittent loose connection. Conclusion: No change.
  • Ran, troubleshooting of hardware and devices, via the control panel. Problem found: material changes may not have been detected. Explore more options just takes you through http://social.answers.microsoft.com/search/en-us/?query=hardware+device, that it is a 404 error page. Conclusion: Help and Support Windows is sorely lacking. They show no more information than just that something was detected as incorrect.
  • Ran the Microsoft FixIt troubleshooting of optical disc and auto repairman. (http://download.microsoft.com/download/F/5/8/F586FB7C-78E0-40EB-AF41-4C925F803CAF/CDDVDWin8.meta.dia... The convenience store has reported that the device was not found. He recommended to remove all power cables, power off, and various other things which have no relevance for computer laptop troubleshooting of switching equipment. He said: If the problem persists, contact the manufacturer. Conclusion: Windows troubleshooting can not solve the problem.
  • Run Windows Update to ensure that all updates and definitions have been installed. Conclusion: Windows is perfectly up to date.
  • Run a complete Rootkit and malware using Sbybot S & D 2.3 heuristic analysis. as a signature database scan using Windows Defender. Conclusion: Laptop is clean of rootkits and malware, to the best of my knowledge.

  Notes:

  The DVD player is NOT appear in Device Manager, OR in this PC.

  The DVD drive is NOT detected by diagnostics system UEFI.

  There is reference to the DVD in BIOS drive NUMBER , other than as an option of Setup, which is generic.

  The DVD player itself, works and has been verified on a different machine.

  The only possible conclusion is that the optical drive port mini-SATA on the motherboard is dead.

• SSD instead of an optical drive on the Pavilion dv6-6b56er

  Greetings!

  My laptop is Pavilion dv6-6b56er, model: A2Z12EA #ACB.

  I want to remove the optical drive and install the SSD.

  HWiNFO64 info:

  SATA host controller
  Interface supported speed: Gen3 6.0 Gbps

  It's SATA III. problem is my hard drive (tow model: SAMSUNG HM641JI) installed on SATA II.

  and optical drive SATA I. I need to find a cable connector to hard drive (with SATA III) and replace it with the cable from the optical drive.

  But I can not find

  info on the hard drive cable is so little:

  CASA 15 "HDD CABLE

  50.RI05.011

  ANPI P 10/11/13

  Spoiler (Highlight to read)

  

  That's all.

  If you know the link or something else, you're welcome

  Greetings! solved my problem by buying optical Bay 12.7 mm

  Now I have SSD on SATA 6 Gbps gen3 and HDD - gen2, SATA 3 gb/s

• Optical drive internal appearing as a removable device

  I recently bought an operation of Dell Latitude E6420 used Windows 7 Ultimate 64 - bit (SP1) and I am also very happy with it. But after I finished installing all the drivers that have been recommended since the Dell Web site, he developed an unusual problem: the optical drive (PLDS DVD +-RW OF THE - 8A3S) appears as removable material, even if it's not, and if I "eject" it, I need to restart the system before it works again.

  This did not happen before on this machine and is the first time that I've ever known a problem like that, never. My mother and a friend also bought the same model at the same time - there is a similar problem on my mother (also Win 7 x 64) machine but not on the computer of my friend (8.1 Win x 64).

  I figured that maybe that's a problem of driver, but re - install the driver from the optical device and even do a system restore didn't fix it. I also found some information of Microsoft Windows Hardware Dev Center Archive, which States:

  Incorrect configuration of SATA

  Incorrect configuration of SATA may appear in the following situations:

  • If the system incorrectly identifies a SATA port internal as external, Windows disables LPM on this port, and therefore can not save on the port. In addition, Windows treats the internal non-removable device that is connected to this port as a removable device. For example, it appears in the device safely remove dialog box in the toolbar State system and in devices and printers.
  • If an external SATA port is not properly configured, it is possible for a device that is connected to the port to be considered non-removable and therefore do not attend the safely remove an instrument dialog box in the toolbar State system and in devices and printers.

  If an internal SATA port is incorrectly configured as a port external SATA, a system vendor or administrator can fix without updating the BIOS OF THE system or the Windows software.

  To work around this problem, you can disable external SATA support on a per track basis by setting the value of the TreatAsInternalPort registry key to 1, and then restart the system.

  If the system has internal and external SATA ports, but a device that is attached to a port internal SATA appears in the dialog box safely remove devices in the system tray or in devices and printers, you should reset the registry key for the port.

  I could not find the registry key mentioned and I am reluctant to change the registry without being certain of what it is I'm supposed to do. Someone solved a similar problem and any help please?

  Hi, Fatima.

  I think that most portable DVD players are actually removable and should be displayed as such. "Eject" to disable the device, but pulling out and plugging it back in should restore the functionality.

• [SOLVED] Optical drive empty missing in Windows Explorer, but not in the folder of the computer or Device Manager. Windows 7 x 64 HP Pavilion dv6-3032tx

  The problem: the optical drive [cd/dvd burner] icon is missing in Windows Explorer when no media inserted in the drive. Even if the optical drive icon in Windows Explorer when a disc is inserted in the drive.

  However, the optical drive appears in 'Device Manager' and in 'Computer' folder or no media is inserted in the reader as to the latter.  This doesn't seem to be a hardware problem.  It is a Windows 7 problem [or character?], which seems to be set [or omitted] in Windows 8.

  Here are the step by step process to solve this problem:

  1. open Windows Explorer [click on "Start" and type "Windows Explorer" in the search box, then click on the first result to the Summit, which is "Windows Explorer"]
  2. in Windows Explorer, click on "Organize" (top left of the window).
  3. in the click from the drop-down list 'folder and search options '.
  4. at the bottom of the window that comes up, under the "Navigation" tick to choose 'show all files '.

  I need to do this every time I have to reinstall Windows 7 x 64 Home Premium on my HP Pavilion dv6-3032tx laptop.

  I hope this helps someone. Wellness wish all

  Hello

  Thanks for sharing the solution. Hope this fix helps the other forum users encounter the same error. In case you are having other problems with Windows in the future, feel free to post your request here on the Windows community, we will be more than happy to help you.

• Install the software without optical drive

  I just bought a new Mac Book and I want to uninstall my CS4 on my old laptop and download on my new laptop. A problem, no optical drive. Y at - it somewhere online, I can enter my licens information and download it directly to my computer?

  Use this method:

  Direct download links for Adobe software

  Follow the isntructions exactly...

  Mylenium

• Problems with QE65000 and optical driver Océna spectrometer

  Hi, a few months ago, I installed the driver to use the spectrometers of USB4000, HR4000 and QE65000 with LabVIEW 2010 with Windows 7 - x 64. Recently, I measured the spectrum of the Source of Calibration HG - 1 Mercury Argon with the help of software SpectraSuite and a LabVIEW program QE65000 spectrometer ("optical ocean 2000 4000 acquire continuous Waveform.vi, example of library, Fig1"). When I got the two spectra, I observed that there is a shift to the infrared region of the spectrum with LabVIEW program. Acquired calibration coefficients are consistent with "wavelength calibration data" that comes with the spectrometer (Fig2). So, I would like to know if there are problems with the example of the library program or what is the problem?. Attached to this message I send image of obtained spectra.

  The black figure is the spectrum obtained with the example LabVIEW program, including the ocean optical library. The red graph is the spectrum obtained with SpectraSuite and coinciding with the real spectrum of the HG-1 lamp.

  Best regards, Diego

  Version 1.3.2 should be alive in a few hours and this latest version is implementing the changes suggested above.  Did someone mind try these out and let us know how it goes?

  2000 4000 optical ocean pilot Page

  http://sine.NI.com/apps/UTF8/niid_web_display.download_page?p_id_guid=7833BD4A31DA1274E04400144FB7D2...

• Problem with optical drive

  Hello

  I backed up all my files on a DVD. Then formatted and reinstalled Windows 7 Ultimate. At first I could access the files on my DVD, now it says I need to format the disk in drive D, until I can use it. When I cancel, he said that d:\ is not accessible. Data error (cyclic redundancy check)

  Thank you

  Hello again RicTech,

  I'm glad to hear that you were able to access the files. The only thing I can think in light of what you posted is to check to make sure that you have updated drivers optical drive on your computer. To do this, I would recommend running the HP Support Assistant to update all your drivers HP and to ensure that you have completed all your Windows updates as well.

  If you could re-post with the results it will help others in the future that have the same problem. Thanks for posting on the HP Forums. Have a great day!

• Re: Problem with optical drive with the Satellite C50D-A002

  I have a problem with my CD drive on my laptop. Whenever I insert a disc and it runs well, but it tends to really vibrate wrong, I checked the driver updates but none are currently and I checked for any damage but I see nothing.

  Have you tested with several different CDs or DVDs?
  Make sure that each media is placed in the right position.

• problem with optical drive DVD

  I installed a new optical drive and I can't seem to use several DVD discs. It will install the first but does not install any more wide. Sometimes diving keeps opening and closing of the drive.

  Device Manager displays the driver for TS-H653R but optical device signals the driver to be SH-224DB_Sb00/1

  How do I get the machine to use the correct driver or is this really the problem.

  Thank you

  Thomas Wagner

  Hello

  Please contact Microsoft Community.

  I suggest to refer to the following methods and check if it helps you.

  1. run the hardware and peripheral troubleshooting tool.

  http://Windows.Microsoft.com/en-SG/Windows7/open-the-hardware-and-devices-Troubleshooter
  
  2. Uninstall and reinstall the cd - dvd drive:

  If the drive is not listed, remove and reinstall the existing drivers.
  To do this, follow these steps:
  1. click on start and then click Control Panel.
  2. click on system and Maintenance, click System, and then click Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
  3. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  4. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
  5. When you are prompted to confirm that you want to remove the device, click OK and restart the computer.
  After the computer restarts, the drivers will be installed automatically.
  http://Windows.Microsoft.com/en-SG/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  I recommend you update the drivers of CD - DVD drive manufacturers Web site.
   
  Method 3 Firmware update:

  I would also recommend updating the firmware of the CD - DVD drive. You may need to contact the manufacturer for it.

  You can also see the article below for further assistance.
  http://Windows.Microsoft.com/en-SG/Windows7/understanding-hardware-and-software-for-64-bit-Windows

  I hope this helps.

  Kind regards
  Anusha