Problem with PCI-4065
Nice day
Install dmm multimeter 3.0.6f1 version and when I install PCI-4060 and PCI-4065, max (measurement & automation explorer) detect PCI-4060, but PCI-4065, before this failure had not
Thomas, Jared thank you for for your support!
Ago corregi el problema... lo that achieve fue than baje ultima version of NI-DAQ (NI DAQ 9.7.0) the instale, reset the computadora y al iniciar shelter MAX y ago detecta las tarjetas PCI-4065...
SALUDOS!
Tags: NI Products
Similar Questions
-
Problem with PCI Express Root Complex
I bought a hp 15 t - j100 with Windows, but on windows 8.1 8.1 but I needed to change windows 8 and now I have a problem with the PCI Express Root complex code 28. The disks I have download for hp of the site http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=6521...
I need help to solve this problem
Thank you
and I'm waiting for help
Hello:
You need this driver...
-
Problem with PCI device and network controller
Hi, I have problems with drivers, I tried several but does not work. I have a laptop HP 2000 with windows 7 Ultimate 64-bit. These are the properties of hardware retail:
Network controller
PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
PCI\VEN_10EC & DEV_8176 & CC_028000
PCI\VEN_10EC & DEV_8176 & CC_0280PCI device
PCI\VEN_10EC & DEV_5209 & SUBSYS_520910EC & REV_01
PCI\VEN_10EC & DEV_5209 & SUBSYS_520910EC
PCI\VEN_10EC & DEV_5209 & CC_FF0000
PCI\VEN_10EC & DEV_5209 & CC_FF00Help, please
Thank you
Hello:
You need these drivers:
-
Problem with PCI-e slots on the S51200ZCTO Pavilion
Hello. I bought this computer for use as a media server, replacing a 3300Z failed two weeks ago. One of its functions is my AV receiver Rs232 command I bought an adapter cheap PCI-e series online and installed. The machine refused to start with the card installed in one of the three locations. Attached to the HP splash screen. Decided that my card 12 was obvious junk, I went downtown and bought another card for $30. Same question.
What I did:
Disabled all 3 PCIe x 1 slots and slot of the minimap.
The machine will start with the card installed, but of course, it's kind of useless.
I activated the slots selectively.
The machine will fail to start whenever the first location is enabled and one of the two cards is installled.
If the first location is disabled, I can activate only two and three slots and the machine starts correctly with each installed card.
I installed each card in turn in slot 2 and enabled only the slot 2 in the bios.
Windows 7 can not find two cards.
I manually installed each card in turn.
They have installed but shows an error code 10 (device cannot be started)
I have about confcluded that there must be a motherboard problem.
I am a very technical user. I have been upgraded and now my own machines for about 25 years and I've never met this kind of problem with a simple installation device PnP.
If anyone has any idea I will try it. I'm not enjoying the thought of working my way through levels of support for HP to convince them that there is a real problem or to ship the computer for repairs.
Thanks for the chipset, here is another card:
http://www.Newegg.com/product/product.aspx?item=N82E16815124112
-
problem with PCI and PCI express
Hi people
I have a problem with my VDI.
some of my needs of clients to access the PCI and PCI Express slots so that they can fix some PCI card on them and program them
VMware VIEW can send ports to the VDI?
do I have to use local mode for this scenerio?
Please help me
1. No, not that I know of.
2. you need not any material to make basic 3D rendering, just turn on the pools.
Check out this blogpost for heavier applications like AutoDesk 3D:
http://www.simonlong.co.uk/blog/2012/10/25/VMware-view-3D-gaming-experience/
Linjo
-
Analog multichannel peculiar read problem with PCI-6014 - hardware problem
Hi all
I see some very special behaviors with a 6014 when I do a multi-channel analog playback. I am revamping of existing code to a customer, which implies the passing of the traditional DAQ in the DAQmx. Traditional DAQ does not use a system based on the tasks, my client was in the process of reading clocked by the software for only one channel at a time, depending on what signal was of interest to both. (application is a series of tests on a control PCB who will interface with some hardware, checking the answers and tensions and others)
When I rewrote the application using DAQmx, I created a single task that contains all of the analog inputs of the map (AI0:15). When I am interested in a particular signal, I indexed the channel since the reading chart data. The strings that contain the actual data are 0, 1, 3, 4, 5, 6, 7, 13, 14 and 15. All channels are NRSE.
One of the signals of interest lights AI7.
When I connect the AI7 signal with an oscilloscope, I read 2.5V - which is exactly what I expect to see.
When I read AI7 using MAX, I read 2.5V.
When I read AI7 by itself using a single channel DAQmx reading (i.e. 1 Samp 1Chan or 1Chan N Samp), I read 2.5V.
When I read AI7 simultaneously with all the channels that have a greater number of channel (i.e. AI8-15), I read 2.5V.
When I read AI7 simultaneously with any channel that carries a lower channel number (i.e. AI0-6), I read 2.34V.
?????
For example, if I read AI0:15, I read 2.34V on AI7. If I read AI0:7, I read 2.34V. If I read AI7:15, I read 2.5V. If I read AI7:10, I read 2.5V. If I read AI6:7, I read 2.34V. And so on. Any combination of playback channel which includes results AI0 AI1, AI2, AI3, AI4, AI5 or AI6 during a misreading on AI7.
All channels read because they are supposed to, no matter what channel is included in the job. AI7 is the only one that illustrates this behavior.
I wrote code for the acquisition of data for 10 years now and I have never seen anything like this before. The behavior is consistent. I am sure that it is a hardware problem with the Special Commission that I use. That's the advice of my customer, I don't know when they bought it, but I think they have had for years. I doubt that ever, it has been calibrated.
I guess it's more I'm curious than anything else - what on earth would cause this behavior?
I'll tell my client to replace the card, if really I just asked my own knowledge.
-
This is my first post on this forum but here's my problem. I recently accquired a HP DC5800 unit and when I try to install a PCI wi-fi card in the IPP only mothers video out put of the graphis edge slot is disabled. has anyone encountered this before and have all the solutions to this problem
After spending a few hours playing with it, I took one of the cards on another system and it works fine, I now think that when the power supply went into the dell he went out somehow the card...
-
Problem with PCI-GPIB card control Agilent 8648 D generator interface
Hello
I downloaded the driver Plug-and-Play (project-style) for Agilent 8648 A generator of signals. I use LabVIEW 2011.
I open the file project and resource VISA name menu, select COM1. Note that I use 82350B of the PCI-GPIB Interface Card.
I run the project, and I get timeout error.
Is there a problem in the PCI-GPIB interface or am I missing something? I'm new to LabView and PCI-GPIB interface, and I'd appreciate any help.
Thank you
Nabil Gharib
Given that you do not use a NI GPIB, go to MAX, select software and NI-VISA. In the right window, click the Options of VISA, and then select passports under general settings. Check on the passport of NI-VISA for Tulip.
I'm assumimg you loaded the driver of Agilent and tested the communication with their software.
-
Problem with "PCI Simple Communications controller" driver in inspiron n5010
Hello
As a first step to apologize for my bad English
After installing Win7 Ultimate 32 bit on my inspiron n5010 I installed all the drivers and components are working properly, but one of the devices have problem because I can not find the drivers for it. This device is "PCI Simple Communications controller" and he scored in the device with the yellow symbol Manager and button update driver in Device Manager does not work for this.
How to find the driver for this part of my laptop?
Thank you
Hello
You can also download it from dell.
N5010--> chipset--> Inter Management Engine Interface Driver
If you see the version of the file. you will see that it supports windows 7 32-bit ultimate too.
-
Salve a tutti, como posso verificate is scheda PCI 6023E works correctly? Currently ho controlled nelle periferiche di computer e pulito che funziona esiste some altro modo per verificare gli ingressi analogici correctly?
Questa e macchina da anni che funziona, currently ho UN valore NaN in una casella seems to che non funzioni some ingresso analog.Grazie by attenzione.
Ciao,.
UNA domanda da MAX e visible? SE TR supera he self-test? Con la cosa programmate, LabVIEW?
Questo valore NAN a cosa port ad una rental di singolo canale switch?
If it could tesare uno degli applications di labview che trova in HELP-> find example-> material inputs - outputs-> DAQmx-> analog input-> input voltage over e rates it canale associato al pine danneggiato seems to che.
In alternativa Può usare MAX per rental airfare. Nel caso non abbia UN generatore e external voglia generare UN marked noto quello che può fare e simulō una scheda che fornisca UN exit Simulator da MAX ed con acquisire his scheda PCI 6023E reale sui canale che seems danneggiato. http://www.NI.com/Tutorial/3698/en/
-
Problems with PCI-7811R after upgrade from LabVIEW
Hello
I have been using a PCI-7811R under LabVIEW 8.2 for quite awhile without difficulties. However, I just upgraded to LabVIEW 2009 and it seems to have stopped working.
I tried to run old code (that worked before) and I get the attached error. I try and locate the PCI-7811R in MAX ver 4.7.7 and he's not here.
Any suggestions?
Gary
-
Problem with PCI-6704 after upgrade
I recently upgraded from labview 7.1 to 8.6, at the same time I've upgraded to the latest version of the driver NOR-DAQmx, MAX and the existing drivers (7.4.4). After upgrading my PCI-6704 Board has stopped working. When I try to run the test panels I get a message "the device is not the test. Do you want to continue? "If I click on Yes, the test Panel opens and I get the message error in 10461. I tried to reinstall both daqmx drivers existing. I tried to uninstall both drivers and remove cards, restarting the computer, and then reinstall the new. I tried to install only the existing drivers and I get the same error. The pilots reset has no effect. I also tried switching PCI slots. I have a card PCI-MIO-16-1 and it works very well, and it works in a pci slot. Is there anything else I can try?
I uninstalled the NOR-DAQ traditional 7.4.4 and installed instead of NOR-traditional DAQ 7.1 and everything works well again. Apparently there is something in the 7.4.4 update that did not like the PCI-6704.
-
Problem with PCI Simple Communications Controller
Hello dear team of HP, I have laptop Hp Pavilion dv6, QJ920AV product number #AVA, 2CE14601BD.
So, I can't find a solution for PCI Simple Communications Controller driver missing. Can you help me, please...
Hello:
Here is the link for the driver you need for PCI of Simple Communications controller:
-
Having some problems with drivers
Hello everyone I have a problem with PCI-controller and controller-Sm where I can find the drivers for them?
I have model g1254sg.
PC-controller
PCI\VEN_10EC & DEV_5209 & SUBSYS_166F103C & REV_01
PCI\VEN_10EC & DEV_5209 & SUBSYS_166F103C
PCI\VEN_10EC & DEV_5209 & CC_FF0000
PCI\VEN_10EC & DEV_5209 & CC_FF00SM-controller
PCI\VEN_8086 & DEV_1C22 & SUBSYS_166F103C & REV_05
PCI\VEN_8086 & DEV_1C22 & SUBSYS_166F103C
PCI\VEN_8086 & DEV_1C22 & CC_0C0500
PCI\VEN_8086 & DEV_1C22 & CC_0C05Hello:
You need these drivers for devices.
SMBus: Install this driver first and then restart.
This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.
File name: sp52791.exe
PC-controller:
This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.
File name: sp55030.exe
-
Problems with the Ethernet controller and PCI Satellite L30-10 X device driver
HelloW!
Sorry for my bad English, I'm from the Russia.
A few days ago, I bought Satellite L30 - 10 X with W Vista on board. In my opinion, that this OS does ' t very good on this computer, so I install W XP.I have some problems with drivers. At first, I don't know which model I have: PSL30 or PSL33? I have download all the drivers for the two models. But after installation, computer doen't find the drivers for the Ethernet controller and PCI device...
Hello
Satellite L30-10 X belongs to the series of PSL33E. This number located on the label on the bottom of the device!
You must choose this number in the form of driver download for XP compatible drivers.
I put t know why you are not able to install the LAN driver. I have the same laptop with Vista and I've install the XP and all the drivers will work perfectly.I assume that you have installed the drivers in the wrong order. Please take look in the Toshiba installation instructions txt file. In this order, install the driver! This is important.
I think that you should install XP again to ensure that the registry clean, then download and install the XP drivers compatible as mentioned in the installation instructions file.
Good luck
Maybe you are looking for
-
Can I charge my iPhone 6s and Apple Watch sports with 12W charger without damage of the battery?
-
Satellite C50D-A-133 with Win7 - cannot install the USB 3.0 driver
I Satellite, C50D-A-133 with Win 7 x 64 and cannot install the usb 3.0 drivers.I download the driver from the support site of toshiba for usb 3.0 for win7 x 64 and it starts to install the driver, but in the end it saids...Windows found driver softwa
-
Want to put the new USB port in 2140CDS Satellite
Hi, I have a Toshiba satellite 2140 CDS. There is only a single usb port, I want to change the usb port because it is broken, and if possible I want to get a docking station or port replicator. can u give me a suggestion.
-
ERROW FO9022 (F09022)
THAT MEANS ERROW800FO9022 Moved from the community involvement Center
-
On start-up the computer, it does not load XP but goes to starting XP, and says NVRD32.sys file not found. I have to go up to xp home line manually and it load. How to fix the problem, so he starts xp automatically without entering start xpThank you