Problem with PCI device and network controller
Hi, I have problems with drivers, I tried several but does not work. I have a laptop HP 2000 with windows 7 Ultimate 64-bit. These are the properties of hardware retail:
Network controller
PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
PCI\VEN_10EC & DEV_8176 & CC_028000
PCI\VEN_10EC & DEV_8176 & CC_0280
PCI device
PCI\VEN_10EC & DEV_5209 & SUBSYS_520910EC & REV_01
PCI\VEN_10EC & DEV_5209 & SUBSYS_520910EC
PCI\VEN_10EC & DEV_5209 & CC_FF0000
PCI\VEN_10EC & DEV_5209 & CC_FF00
Help, please
Thank you
Hello:
You need these drivers:
Tags: Notebooks
Similar Questions
-
PCI devices and network controller
Can Hi anyone say about hoe to install PCI device driver and network controller Please that these two devices is marked with a? in the windows device drivers
Thank youHello
If you have a problem, it will be very useful if you can write us which model of laptop you have.
Please check the download from Toshiba site. You will find all the drivers that must be installed. If the unit is not old, you will find an installation manual and order of the facilities. If you are not able to identify hardware, please write again.
Good bye
-
Yellow brand - PCI Device' and 'Network controller' on the Satellite A100-787
There is a yellow question mark in Device Manager for a pilot called "PCI Device" and also for "Network controller" even if the network (LAN) connection is working well and all the other computer functions seem to work well.
What are these devices?
The second device appears to be a LAN or WLan card. You should check if one of these cards were not installed under network adapters.
The PCI device can be a card reader. Check this box too.But I really don't understand why these yellow exclamation points appear in Device Manager. I assume that you have installed all the drivers available. Did you?
Please check if some drivers were not installed.
If so, then download and install! -
PCI device and network controller drivers
I have a Presario CQ57 and in Device Manager, network controller has no driver and I'm not and my WI - FI does not work it shows that he is disabled from device manage. Help, please
And a more... Peripheral PCI generic bluetooth adapter has no driver and I don't know where to find it.
Thank you
Hello:
Go to the support page and your specific CQ57 driver...
Download and install it:
Atheros Wireless LAN driver. (Under the section network drivers)
Driver Atheros Bluetooth and software (under the section network drivers)
Realtek card reader driver. (Under the section storage drivers)
-
I need the driver for ethernet controller and network controller driver, driver pci device video controller for Windows 7 Home Premium 64 bit driver
Someone please help
PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C & REV_04
PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C
PCI\VEN_10EC & DEV_8136 & CC_020000
PCI\VEN_10EC & DEV_8136 & CC_0200PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C & REV_01
PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C
PCI\VEN_14E4 & DEV_4727 & CC_028000
PCI\VEN_14E4 & DEV_4727 & CC_0280PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C & REV_01
PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C
PCI\VEN_10EC & DEV_5288 & CC_FF0000
PCI\VEN_10EC & DEV_5288 & CC_FF00PCI\VEN_8086 & DEV_A012 & SUBSYS_148A103C & REV_00
PCI\VEN_8086 & DEV_A012 & SUBSYS_148A103C
PCI\VEN_8086 & DEV_A012 & CC_038000
PCI\VEN_8086 & DEV_A012 & CC_0380Hello:
See if these drivers work...
PCI\VEN_10EC & DEV_8136:
This package contains the driver for the Realtek NIC installation files in the notebook models and operating systems.
File name: sp49600.exe
PCI\VEN_14E4 & DEV_4727:
FTP://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57965.exe
PCI\VEN_10EC & DEV_5288:
This package contains the installation files for driver for the Realtek card reader for laptops models and operating systems.
File name: sp49599.exe
PCI\VEN_8086 & DEV_A012:
-
Problem with recording devices and call issues
Until recently I had a few problems with my microphone on Skype. Whenever I start my PC, everything will be fine, but every time I change the microphone source (from my webcam for stereo mix so I can play sounds in calls) and leave the call, I get weird questions. First if I still have the stereo mix as the source micro fine, but if I change it to my micro webcam when I click on answer call nothing happens and if I call someone it won't fail to connect and it will say: problem with the device registration, which is strange because it has nothing to do with the connection. Also if I change the source to microphone during a call, the call will be disconnected as if I turned on the internet and post something about the sound card errors. Can anyone help?
I found the problem, clown fish was not working with Skype and it ceased to use the microphone and I thought since I had removed so I don't think that was the problem, but for some reason any, it is been installed, in any case I removed it and now Skype works fine.
-
Hi I cannot locate the drivers I need to download for my laptop. I have recently reinstalled windows and it can not find the dirvers for my network control devices and pci. The model number is g6-1c74ca and the product number is A3J86UA #ABC.
Yes on the page that I linked above you need Realtek LAN and LAN Realtek wireless network and also Intel Management Engine Interface under Chipset.
If it's "the Answer" Please click "Acceot as Solution" to help others find it.
-
Problem with LocationListener availability and network on Storm 9530 Simulator
Having an interesting problem. I have an application with a locationlistener which works fine on "BOLD" and curve (Simulator and device) and 9500 Simulator. Try to make it work on a Verizon 9530. It * used * to work fine, but now the question I have is this: in the Simulator (9530-Verizon 4.7.0.148 and 9530-JRE that comes with the 4.7 eclipse plugin), if the CDMA network is turned on, I only get invalid places every 15 seconds. As soon as I disable the network (by unchecking it in the simulation/network properties dialog) I can get a good location every second, as it should. If I then select the network locations stop again.
Pulling my hair out, any ideas?
OK, solved my problem, I had the incorrect criteria to work with the Verizon Storm discovered. Yet, very strange behavior.
-
PCI device and video controller, ethernet controller
Sir please help me to find the driver for my hp mini 110 3101tu.
PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C & REV_01
PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C
PCI\VEN_10EC & DEV_5288 & CC_FF0000
PCI\VEN_10EC & DEV_5288 & CC_FF00Hello:
This is the driver you need for the PCI device.
Ethernet controller:
I need to display the ID of the hardware for the network controller as you did for the PCI device because it can be one of several different model wireless cards, that HP could have installed in your laptop.
-
Problem with my device and application with Windows 10
Guys,
How can I solve this problem. He says that my camera is not completely compatible with windows 10 and also my app that doesn't work 100% on windows 10. This will interfere with my pc? Need help pls.
Hi maverickguy :)
There is no real "means" to solve these problems. The only way they will get solved if the manufacturer of your device (Broadcom) or your software publishers adapt their software so that they will be 10 compatible Windows. Right now, I can tell you that even with these errors, you still can update Windows 10. The Broadcom Wireless card is a virtual, so unless you use it, you don't need. It is not your true wireless adapter so your WiFi will still work, then you can ignore this warning. Regarding the LogonStudio, it simply means that the program could not work properly after the upgrade so that you can be: uninstall the upgrade and reinstall the then reinstall it after the upgrade or the program is simply not compatible with Windows 10 and the Publisher unless it adapts to Windows 10 , there is nothing you can do about it.
However, these are only warnings that can be ignored, your computer can be upgraded to Windows 10 and it'll still works.
If you have any questions, let me know.
Yoan
-
x201i problem with adding devices and connecting with them via Bluetooth
I have a new computer x201i laptop Windows 7, Bluetooth is installed and running, the icon is on but I can't communicate with external devices like mobile phones. The system concludes that they are, but does not allow the exchange of files. I get the error message could not connect with the device, or did not find the right driver for the external device. I reinstalled the driver from Lenovo support page, no result any ideas? Help, please...
Try to install nokia ovi suite. You can find it here: http://europe.nokia.com/support/download-software/nokia-ovi-suite/compatibility-and-download
Normally, it will install the drivers you need.
Hope that helps...
-
For some reason, all this is missing. I did a system restore and nothing... .a factory restore and nothing... I can't find the manufacturer of the hardware so I can download the drivers. Help!
You are the very welcome, Kay.
Here are links to the drivers you need.
First install the chipset driver and restart.
Then, install the graphics driver and restart.
Ethernet:
Network:
PCI:
Best regards
Paul
-
HP laptop, 2000 - 369WM: can not find the drivers for PCI devices or network controller
I don't have a Notebook HP 2000-369WM. Just wiped the dive hard and installed Windows 7 64 bit and I can't find 2 drivers that I need. Controller and PCI network device any help would be great.
Hello
Please try:
1 PCI: Card reader
http://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52186.exe
2. Wifi: Ralink 802.11 b/g/n WiFi Adapter
http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56942.exe
More drivers:
http://support.HP.com/us-en/drivers/selfservice/HP-2000-notebook-PC-series/5145724/model/5171088
Cordially.
-
Satellite M40X driver PCI Device and NetworkController problem.
Hello..
I formatted my German original OS version for the English version. I downloaded all the drivers from the toshiba site and installed. The/CompuMgr/DeviceManger /AdminTools of /ControlPanel of system, I see that the drivers for the PCI Bus and network controller are missing.
Any suggestion on which driver files may resolve this problem.Thanks in advance
ShineHello
As Tobi said check the installation instructions. It has listed all the necessary drivers and tools and utilities. As far as I know this list is also important because it is a proper installation order.
Good bye
-
HP Probook 4730 s system device base and network controller driver
Dear employees of Hp,
I have install on my HP Probook 4730 s new Windows 7 Ultimate and I cannot find and install the base system device and network controller driver.
Can you help me please?
Kind regards
Robert
Hi, Robert:
Here is the link to the wireless card driver you need...
Best regards
Paul
Maybe you are looking for
-
Title says it all
-
Oracle forms 11g link java updated request each time, ends up with a blank page
HelloKindly advice the cause of the issue where my form link 11g oracle launches not required to install the update of java every time after installation of java 8 that it will end with .a page blank for a second time if refresh us the page new messa
-
HelloI will apply patch bundle and my oracle database 11.2.0.2 and Microsoft Windows x 86 platform. As read the file Readme Oracle recommends to use OPatch utility version 11.2.0.1.3 or later. To check the inventory availability I use the command lsi
-
procedure to run the dynamic DDL
If I have the T table below, and I need to create partitions based on the year (year), but I need to create partitions for each quarter of the year. How can I write a procedure for this? WITH T AS (SELECT 2001 YR FROM DUAL UNION ALL SELECT 2002 YR FR
-
Hi allI created a mapping (interface) on ODI 12 c. In the area of the source, there is a view (view very huge and important), created in Oracle db. In the target box, my table is in MSSQL Server. Here, the problem is, a column in the view Oracle type