Problem with PDF created with Captivate 6

Similar Questions

• Small problem with Captivate 6 quiz...

  I wonder if someone could help me with this little problem with Captivate 6 quizes?

  I've set up a quiz and disable the playback bar to save screen space

  I turn off the button 'next' on the issues because it allows to the learner in order to bypass the unanswered questions (and does not trigger the incomplete caption)

  And so I rename the button submit to 'next' - and that's fine, but when the quiz is reviewed there is no 'next' button to navigate between issues

  I thought that I might be able to hide the real button following behind the submit button (labeled 'next'), but finds that it is not possible to change the stacking order of buttons issue

  So, how can I stop the learner without going through questions without answer AND allow navigation during the review of the quiz?

  Pointers gratefully received

  Simon

  Hide the next button (Skip) under the clear button.  When you add a quiz for the Clear key is usually on a higher default stacking order.  But if it isn't, just remove and replace the button 'Clear' and it will be over the next button.  Usually, removal and replacement of the buttons on the quiz questions are the only way to manipulate the stacking order.  It's a pain, but this is easily achievable.

• Firefox problem with Captivate 2?

  Hi all
  I went through these forums and on the Web for a solution to my problem, but none will be presented. I use Adobe captivate 2 to create a simulation. I publish the simulation as a SWF with HTML. I test on my local machine in Firefox 1.5.0.9 and with Internet Explorer 6.0.29. Everything works fine on the spot. If I put it on the Web, everythign works as expected in Internet Explorer, however with Firefox, the shortcut key 'Enter', that I have assigned to a text entry box does not work. Nothing happens. Does not proceed to the next screen, does not display the legend of failure. For the sake of curiosity, I tested this problem with an old sim card I created with Captivate 1. The problem is not with captivate evidient 1. The problem seems to be attached to Firefox, Captivate 2 and access to the simulation on the Web. (Unfortunately, I can't provide a link to the problem, as it is a secure site, and which would involve giving you a password in order to release the material to the company. They would not like this so ;))
  
  Any help you can offer would be greatly appreciated, because this problem has left me speechless.
  
  Thank you
  Keith

  Hi all

  Thank you for your response. I found the solution. I assumed the standard.js file published by captivate was to suppress the warning flash IE. However, no calling not this file in my custom HTML page, load the SWF file has caused the key of the entry in Firefox problem.

• Problem with Captivate 8 and SumTotal learning LMS Maestro-

  I get white screen when lance course published under the title of SCORM 2004 using Captivate 8.  All the publication settings are identical to those used with Captivate 7 and all classes of properties and parameters are the same in the LMS as course published using Captivate 7. At the launch of course, instead of the opening of the route screen, a white frame appears showing the playback bar course and LMS navigation bar. Logon screen does not appear until the user clicks on the button play on the PlayBar. No idea why this is happening?  Here is a screenshot of the white frame.

  

  Ron,

  Thanks for the help.  I found a solution for the problem here: HTML5 projects Captivate freezing in Google Chrome, c. 36 + |

  Because it worked, obviously, the Chrome issue 36 comes break HTML5 output.  I hope that the patch solves everything.

• Serious problem with captivate print

  Hi, I wonder if someone can help me, I have set up a course that worked well and print a certificate beautifully - then I had to modify a page and since then I can not print the full name on the certificate, it displays only a part of the name.  Does anyone know a solution to this problem, I searched everywhere in Captivate to see if I can find a limit on the text input field, but not found--please help!

  I tried Adobe support, but it is impossible to get your hands on except if you pay the wads of money! It seems that they do not want to offer any kind of help

  How many characters it prints? What is a text with a variable inserted caption? I ask this because the default length of a variable inserted is 15 characters. To change this, you will need to reintroduce the var and change its length:

  

  Lilybiri

• Problem with Captivate 9 preview

  Working on a sensitive project today, I found that all of a sudden there is a problem with the image previewed.  The normal reactive screen does not appear and instead, I get a preloader icon which never completes.

  I tried all the options - next 5 slides from the slide and the project - but none work.

  

  Anyone know what could be the cause and how to fix it?

  I noticed two things that are different from an existing project which works fine:

  1. larger file (50 MB ~)

  2. the location of the file to preview - preview of existing project has a link that looks like this: http://localhost:3679/HTML5Temp484021250159Pre/rindex.html as you can see in the screenshot, is not what the current file tries to run.

  You took the right approach, I answered to do this to someone who has posted the same question here today. Hiding a slide, to see which is the origin of the problem and is revealed to be corrupt.

• Preloader again a problem with Captivate 5 and 5.5

  Ok.  This gets really annoying.  I downloaded a patch for Captivate 5 problem my preloader.  Now my colleague has Captivate 5.5 and we still have the same problem.  I'm tired of having to return to Captivate 4 whenever I have a project that needs a preloader.  Anyone has a solution.  It is said to use A3 to the preloader in 5 or 5.5.  It doesn't matter if I use A2 or A3.  Nothing works!

  Thank you

  Jeff

  If youv'e ' e summer move files or share them between computers, then the way to preload in the install Adobe Captivate file directory are may not be incorrect.

  Go to preferences and look at the current path shown there for the Preloader.  Navigate to the correct location depending on what version of Captivate you use to edit the file with.  If Captivate 5 or 5.5, your only choice will be to use AS3 preload. Do not access a preloader AS2 in Captivate 4 installation directory.

• Problems with Captivate 5 and Tweenlite and programmatic animation (single frame)

  I'm just curious to know if someone else out there he uses Cap5 and strengthening of using Tweenlite Flash animations. I found Tweenlite to make my production much more efficient, but it seems that Captivate has a serious issue with it. Our team had to use the widget to synchronize Animation to get one of our timeline based animations SYC would be correctly, but any Tweenlite based animation or Actionscript animation Cap5 go haywire. Common interest issues include, animations from the slide in halfway through their animation, screen flashes (suck on 5 frames and loops) after the deployment of a LMS but works fine locally and animations by playing on the slide wrong and irregular results (sometimes an animation will play well, other times it won't).

  If everyone has the same problems or knows a fix for this I would be incredibly grateful. Otherwise, I think that his return to the chronology of the ol.

  See you soon.

  You may be correct.  But if so, I have not encountered this problem yet.

  The way I have suggested that you implemented the code AS on the high level chronology was that you had only two frames.  The stop(); action takes place on the second image.  There may be a way for use rather an action stop on the first frame and then have the room only the second image slide animation is correct.

• Publish error with Captivate 5

  I can't get a project to publish in Captivate 5. I get an error message saying: the project was not able to publish and when I try again it then asks if I want to replace the file. A file was created, but it is completely empty. I'm working on a Windows 7 computer. I had no problem with Captivate 4.

  It means these ones:

  

• Affected by a problem loading with a Module created in Captivate 9

  I used an eLearningBrother template to create a Captivate 9 module. Now, I knew a loading problem once I published in format HTML (the only option available; I learned about the Forum that it is because I use project sensitive s.). Customers cannot examine the files published from a local disk, in our LMS or intranet. The place of loading is buffering on the screen...

  However, after I published on Adobe Captivate premium, loading more no problems. But my original head setting of the game is all gone (hide the playback head when there is a slide of questionnaire). Rather only the default first play head is visible at the bottom of the screen.

  Any ideas on this loading problems? Thank you!

  

  

  I think I found the cause of the problem and it is resolved. The problem is I have worked on the local C: drive but released the module to my local OneDrive for the company on my computer folder. Once I published on my drive C:, no problem loading more.

  Thanks for your replies! Appreciate it.

• Problem with printer, exported to PDF

  Hello, I have a problem with my printer to work. I recently installed acrobat from adobe pro xi. And from a pc, we can use option of the printer to export PDFs, but on the other, we cannot. It reports a problem in the system. So I uninstalled the program and reinstalled after a while but the same problem bulging guard.

  It says this:

  

  I don't understand what is the exact problem because the installation was made in the same way to this computer than for others and that they do not appear this problem.

  What you think is the source of this problem and what can I do to fix this?

  Thank you very much for taking the time to read this also.

  Nevermind guys, I understand it. For all of you who have the same problem, the solution is:

  1 open my computer and navigate to: C:\Windows\system32\config\systemprofile (per-folder if it is easier for you) and check if there is the Desktop folder.

  2. If there is no such thing as the Desktop folder, and then create a new folder and rename it to desktop or copy it from C:\users\Default\Desktoplocation.

  Note: C:\Users\Default is hidden by default

  Hope that helped :D

• Problem with printing PDF and PDF Maker

  Hello

  We have problem with our professional DC from Adobe.

  The first problem: print with Adobe PDF Converter result to the message with 'Interactive Service, window of change '.

  The second problem that we have with the PDF Maker. We can perfectly create PDF files with the add-in in Word, Excel and PowerPoint.

  In Visio and Project after creating PDF to send us a message "the Adobe PDF printer is not installed on your computer...". »

  We have this problem on three different customers. All customers are fully patched with Microsoft and Adobe.

  The desktop Versions are 2010 32-bit on Windows 7 64 bit.

  Thanks in advance for your help.

  Hi avaa90380721 ,

  Try to do the following:

  1 - Hold down the Windows key and the R key on your keyboard, type services.msc in the Run dialog box and click on enter.

  2 - image search for interactive services detection, right-click on it and select Properties.

  3. set the startup type to manual.

  4 - click OK.

  Then, try to print to Adobe PDF and check if its working very well.

  Let us know the results.

  Thank you

  Shivam

• Since Acrobat Reader downloaded DC I can't sign my PDF documents. It does not give me the option more and yes I am connected. On the old version, I got no problem with clicking on "signature" and draw the area where I needed my signature, put passw

  Since Acrobat Reader downloaded DC I can't sign my PDF documents. It does not give me the option more and yes I am connected. On the old version, I got no problem with clicking on "signature" and draw the area where I needed my signature, put the password and "POOF" my signature would be there. With this new version, it won't do that or give me the option. The online help is useless. I need to explain to me how connect you as I used too?

  Hi nicholass35183848,

  I assumed that you had a digital signature created in your player application of old and whenever you use to fill out a pdf with a signature field signed you it. But in order to draw and then sign you must use Acrobat Pro DC no DC drive.

  Thank you

  Abhishek

• Problems with the creation of PDFs in Acrobat Pro 11

  We are going to have problems with shared PDF files created in Acrobat Pro 11.0.11 or above.

  When some users to create shared PDF files and send for shared review, they can be considered as shared PDF in Acrobat Pro (yellow bar appears, with shared PDF functions), but not in Adobe Reader 11.0.11 or higher (without shared review menu bar appears, can't we seem to view manually).

  Anyone know what could be the problem? It's only for PDF files created by some users, another shared review, a PDF file created with Acrobat Pro 11.0.11 or superior open fine in drive 11.0.11 or above. I think maybe it's a setting that is not correct for some users...

  Thank you!!

  -Paul Masalsky

  McAfee (which is now part of the security of Intel)

  Hi paulm85910772,

  Please see this KB document for the creation of a shared review Acrobat help. Starting a PDF review. On the other end uses can participate in a shared review using Adobe Reader help of Acrobat Reader | Share, comment and review from.

  Try the most recent Adobe Acrobat Reader DC Adobe - Adobe Acrobat Reader DC Distribution.

  Let me know how it goes.

  Kind regards

  Nicos

• Problems with protection - unprotect a PDF file

  Hello

  For my work, I need to protect all the word documents in a pdf document, I do it with the option file - print and then I select the printer called PDFCreator, I activate the security options and set a password.

  Then I opened the file created with adobe reader, I put the password and when I try to print again with PDFCreator, I uncheck the security options in this new windows and when I save to a new file, it pops up an error from Ghostscript:

  

  Can someone help me with this problem?

  Thank you.

  If you have problems with a non-Adobe product, contact the manufacturers. That said, Adobe often try to disable PDF - PDF printing, especially for files by password, so it could be design but it works correctly.