Problem with PIONEER DVD - RW DVRKD08L ATA DEVICE

I have a toshiba laptop satellite with the front DVD - RW device registered in it.  It has stopped working.  When I push the button open it flashes once or twice, but does not open.  So I have inserted a PIN in it and opened it.  When I put something in, DVD/CD and close it nothing happens, itdoes not because of what it is.  I went to control panel, thendevice Manager and clicked on the DVD player but it says that the device is functioning properly.  What can I do?

Hello

Try the microsoft 'fix - it' for your problem below

http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

and read this information too

http://support.Microsoft.com/kb/982116/en-us

Tags: Windows

Similar Questions

  • Satellite A300 - search driver for Pioneer DVD - RW DVRKD08A ATA Device

    Hello

    I have a Satellite A300.
    My problem is that the driver for the Pioneer DVD - RW DVRKD08A ATA Device does not work. I have research the Toshiba site for a new driver, but I can't find.

    Can someone help me?

    I put t understand why you need this driver?
    What do you mean by player don t work?

    The Windows operating system contains such driver! It s an own drivers from Microsoft and the ODD should be recognized automatically.
    In your case, you should first check if the CD/DVD drive is recognized in the BIOS.
    If it s not the case then your new ODD is not compatible or there is a hardware failure.

    If the BIOS recognizes the drive CD/DVD correctly, but if the ODD is not correctly in the Windows Device Manager (yellow exclamation point) then this could be the problem of registry.
    In this case, you should remove the reader of CD/DVD from the list of devices and must restart the new laptop

  • Pioneer DVD - RW DVRKD08L ATA

    I have a DVD - RW DVRKD08L ATA when I go to Device Manager it states: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39), what should you do?  I can't yet to launch the system restore disk.  I'm lost, please help.

    Hello

    Run the Mr Fixit

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.Microsoft.com/default.aspx?scid=kb;en-us;314060
    Also here

    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/GP/cd_dvd_drive_problems Rob - bicycle - Mark Twain said it is good.

  • Pioneer dvd - rw dvrkd08 ata device

    My sony vaio vgn-nr498e mentioned above device .my problem is that this device does not work in all.even after I insert the cd/dvd in there, I get the message "insert cd".i have tried to update the driver but not good.under Device Manager it says device is working properly.i bought my vaio of US n used in India. earlier it used to play DVDs/CDs

    Hello

    Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
    solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
    that the troubleshooter does not, and those who "could" be the cause.

    Check with your system manufacturer Maker and device for possible firmware updates and the good
    Your player registry entries.

    Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
    other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
    a person with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • SlimType dvd a ds8a2l ata device only reads CD/DVD

    I have a laptop HP g60-120em with slimtype dvd a ds8a2l ata device dvdrom.

    When I try to read some discs (Sims3 for example) the drive sounds like it works and keeps going, but never shows anything.

    Ive tried to do a regedit and there are no upperfilters or low filters in the destination: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Ive also has run the diagnostics tool FixIt from microsoft, who could not solve the problem and said that the media were illegible.

    Ive tried the CD in another computer and it is readable, even if TI coulds not install

    Please please help me, Ive spent the last 6 hours trying to fix and continue to flock to the top with the same methods, which do not work for me!

    up to date and im the driver does not receive error messages. the drive will read other CDs but does not read certain DVD or CD.

    I'm about to snap and throw my laptop out the window! Help, please

    Try the following to see if they help you (you've already tried this, but I doubt you checked everything (and there are two Mr. Fixits so I know there are new things that you can try)).

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.microsoft.com/gp/cd_dvd_drive_problems - A Mr Fixit

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Well that drivers is "up-to-date", I'd like to try to go to the web site of the manufacturer for the most recent (even if it is the same version) and download and install to exclude the possibility that it has become corrupt - but just enough to cause this problem and not enough to turn off the player or be recognized by the Device Manager.  If she need also of firmware or software, download and install it as well.

    If none of this works, then we can do a more thorough diagnosis or you can take it to a computer for the service repair workshop.  If you want to try some generic troubleshooting, then return and I'll post the procedures (they are long enough).  You can always take it to a computer repair shop if none of these solves the problem (but there is a chance that one of them will work and then it's just the time and effort instead of money).

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • SOLVED problem with my DVD/CD _

    Hello

    I have a problem with my DVD/CD. Although Device Manager says, "this device works properly.". It does not at all.

    I'm very suspicious of the cable connections. The cable has been severely pinched by my grandson. It did not close, and instead to find the cause, he forced its closure.

    So what I want to know is if I can buy the cable online and install it myself.  I have searched but cannot find a place to buy one, and although I searched on the Dell site, I couldn't find anything there either.

    Thanks for reading...

    Inspiron 5721

    Op - MS Windows 10 Home system

    Intel Core i7-3517U

    BIOS - Legacy mode

    RAM - 8 GB

    Name TSSTcorp CDDVDW SE-208DB USB Device

    I appreciate the responses and suggestions.

    I finally got my problem solved by replacing the CD-ROM unit.  I was lucky enough to get an opportunity from a computer at a price store very low. If all goes well.

    Thanks again to all.

  • Code 19 cd dvd not working not not with Windows Vista Business-failure to load the software driver for ATAPI DVD A DH16A6S ATA Device...

    Barely noticed as useless before using the dvd on this machine cd - error code indicates... .Configuration (in the registry) is incomplete or damaged. (Code 19)

    Having read the other answers and the last similar validation seems to be dated to April 2010 of anything else because it please?

    I tried Driver Update and reinstall... .rebooting and then on the line ' difficulty his "all so far nothing works.  What is the latest information about this problem - can any that provide extra help or guide me for more relevant prior display and the best way to proceed. Failed to load software driver for ATAPI DVD A DH16A6S ATA Device...

    Mr. Fix it's obviously gone vacationing insofar as this problem is concerned... Cheers for any help.

    Hello

    Norton is known to cause slow downs and other issues. Uninstall and then running
    the Norton Removal Tool to stop the remains (even those will interrupt the strange) to load.
    Use the recommendations below when testing, even better would be permanently.

    Norton Removal Tool
    http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

    List of tools to clean/uninstall anti-malware programs
    http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

    =================================

    Here's what I use and recommend: (these are all free and very effective versions.)

    Avast and Prevx proved extremely reliable and compatible with all I have
    launched on them. Microsoft Security Essentials and Prevx have also proven to be very
    reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

    Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
    Operation of the network.

    Prevx - Home - free

    Windows Firewall

    Windows Defender (is not necessary if you use MSE)

    Protected IE - mode

    IE 8 - SmartScreen filter WE (IE 7 phishing filter)

    I also IE always start with asset if filter InPrivate IE 8.
    (It may temporarily turn off with the little icon to the left of the + bottom
    right of IE)

    Two versions of Avast are available 5.x and 4.8 x

    Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
    Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
    Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
    Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
    disabled - click OK
    http://www.avast.com/free-antivirus-download

    Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
    and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
    Finish those you don't use).
    http://www.avast.com/free-antivirus-download#TAB4

    Or use Microsoft Security Essentials - free
    http://www.Microsoft.com/Security_Essentials/

    Prevx works well alongside MSE or Avast

    Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
    programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
    or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    PCmag - Prevx - Editor's choice
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
    would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
    (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
    never find anything of note that I started to use this configuration.

    http://www.Malwarebytes.org/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Carpet * a DVD 850 s ATA Device (CD player) - Code 19 error in Device Manager

    I have a problem in my DVD player, I have * mast * a DVD 850 s ATA Device *, there driver not working anymore. Now Iam not able to run my CD/DVD. Every time I have insert any disc, nothing happens even the DVD drive icon is not there in * computer file. I opened the * Device Manager * and I got this message when I click on properties
    * "" Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. " (Code 19) » » *

    I tried updating the driver but it says "" your driver is up to date "" I don't know what to do...

    Please help me! I will be very thankful to you

    Thank you

    Concerning
    Faisal

    What model laptop do you have?

    Try to remove the CD/DVD filters in the registry.
    When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

    (1) run Regedit (start-> Run-> Regedit)
    2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
    (4) restart.

    If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

    This utility can remove the filters for you:
    http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

  • I can't burn DVDs on my ATAPI DVD A DH20A4P ATA device.

    Hello
    I have ATAPI DVD A DH20A4P ATA Device
    Try to burn files to DVD but does not work.
    The DVD device works properly with disks already complete, but it can not simply burn on a blank also tried and with different burning software.
    Is pop - ing that the disk in my DVD drive is not registrable or that the disk is not found - depend on the program, I used.
    Used Nero InfoTool and it found my driver as recordable
    Tried with all the common ways of fixing as uninstalling the driver and let Windows to find it.
    Then I finally found the Microsoft article that has been the solution for many people with the same problem,
    so I was going to give it a try too, but it turns out does not work for me, the article is this one:
    But is does not help me in step 2:
    "In the right-hand side of the Registry Editor window, double-click Drive Type. .
    In the value data box, type 1, if the drive is a CD - R drive or 2 if it is a CD - RW drive.
    Click OK and then close the registry editor"
    In my registry is like this:
    (Default)                                          REG_SZ (value not set)
    0x000053f7 REG_DWORD Type player (21459)
    (Database 53f7 - hexadecimal value)
    IsImapiDataBurnSupported REG_DWORD 0x00000001 (1)
    (Database 1 - hexadecimal value)
    Is there a way to solve this problem with burn ?
    Title of the Moose: cannot burn to DVD

    Thank you for your help, I found that the problem came from the Windows Vista itself, it was on windows which caused the drivers to do not read blank DVDs.

  • Problems with the DVD on Pavilion dv6-2010sa

    HP Pavilion dv6-2010sa laptop computer (under Windows 7 x 64), I bought less than a week ago.

    I started the disk recovery software to back up my OS in the event of future disasters.

    I used a DVD + disc, so it would take 3 discs to do the recovery disks.

    First DVD completed successfully. Software asked me to enter the disk 2.

    This is where I started to have problems.

    Drive recovery software couldn't recognize my blank dvd +.

    The drive makes a lot of noise, but then stopped making noise.

    I tried a few other DVDs +, but to no avail.

    I rebooted the computer laptop and tried but same problem.

    So I tried to play a dvd movie to see if it was the disk recovery software or the dvd player.

    He would not play a dvd movie.

    I also tried to play an audio CD but the same problem.

    The drive icon appears in Windows Explorer, but does not display any info (or open the CD / DVD) when I have a CD or a DVD in there.

    So it seems to be a problem with the DVD-> grateful not any CD / DVD

    If someone can advise?

    PS. I searched the driver DVD (so I could Reinstall driver) but the HP Web site does not contain the driver for 2010sa (DVD software only)

    Thanks in advance

    Gary

    Problem solved.

    Uninstall the device dvd player:

    -Device Manager > do a right-click post dvd/cd player > uninstall the device

    Restart the laptop and OS will reinstall the driver and the DVD/CD drive should start working again (well this is what has happened to me)

  • My hp DVD-RAM GH60L ATA Device receives an error Code 10. How can I fix it?

    My hp DVD-RAM GH60L ATA Device driver receives an error Code 10. (This device can not start..)

    I fact troubleshooting, uninstalling, looking for changes, then install (but didn't), I disabled and then enabled... Nothing seems to work.
    I checked if my driver needs an update. It is being updated.

    I use a Windows 7 Home Basic, 32-bit.

    Any other ideas on how I could solve this problem? Please and thank you! :-)

    This problem occurred after you update or install something?

    Have you tried the fixit of base?

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  • Satellite P30 turn off - also problems with burning DVDs

    Hi Please help me.
    I had a row with my brother and it won't help.

    My Pc is only a year old and it turns off. I would say it was because of overheating, but he just did and it isn't really that hot.
    I put on the books, not on my knees, keep him away heat, crash back to the desktop.
    It makes me crazy, please, any help or advice or anything like that would be a great help.

    I also have problems with my dvd burner, always, he gets to about 17% and said that there is a mistake, thought it was the discs but surely it can be all 100 of them, I tried turning on and off but no use.
    Also the advice would be great!

    Please help a girl in need of a working Pc! Who does not know a lot of technical stuff!

    Hello

    Overheating problems usually occur because the cooling module cannot work properly.
    Fans are unable to work because of the dirt and dust inside the laptop.
    The best way to clear the fans is to use the vacuum cleaner.

    On the problems of DVD writer: well, it's not easy to say why it happens. Have you checked media dvd from different manufacturers? Many CD/DVD media works differently, and you should check it out.
    In addition, there is a problem with the burning software. I put t know what application you're using, but you should try to use Nero. It's very nice software and I m very happy. Check it out

  • Average cd - / dvd-station is niet leesbaar (MATSHITA DVD-RAM UJ870BJ ATA Device)

    My medium in cd - / dvd-station is niet leesbaar (MATSHITA DVD-RAM UJ870BJ ATA Device)

    Hello

    See this page to select your language:

    http://support.Microsoft.com/common/international.aspx

    ====================================

    Or sorry that it is area English.

    Left click at the bottom of the Microsoft Community page

    English and set your language.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • How to remove safely remove the icon of the DVD RW AD ATA device optiarc 7561 taskbar for windows vista

    How to remove safely remove the icon of the DVD RW AD ATA device optiarc 7561 taskbar for windows vista

    Hello Mark G,.

    I think that Christopher was referring to right click on the remove safely icon on the taskbar and choosing then to remove it safely.

    Otherwise, this may be a feature of the device driver and the device manufacturer may be able to tell how.

    Best regards

    Matthew_Ha

  • Philips dvd +-rw dvd8631 ata device

    I added a Philips DVD +-RW DVD8631 ata device in my system, ultimate vistas has downloaded the driver but still not play or burn or even work. Well it opens but that's all. any suggestions?

    Your CD or DVD drive cannot read or write media:
    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    Your CD or DVD drive is missing or is not recognized by Windows or other programs:

    http://support.Microsoft.com/kb/314060

Maybe you are looking for