Problem with power options

Similar Questions

• Problems with power options

  Hello

  I have a HP Compaq 6200Pro MT i5-2400 with Windows 7 pro 64-bit.

  My problem is that if I leave the computer for 10 minutes, the screen goes black (turns off). When I touch the mouse or keyboard, the screen lights up again, and I have to log in again. It's very annoying. I want to keep it all the time.

  I tried to change the power plan in the Panel, but it seems to not work. The computer is not picking up changes I make.

  I tried to change the local policy gpedit.msc-> computer-> administrative templates > system-> power with the same result, nothing changes.

  I tried to see if he has installed a software of HP power on the computer, but I can't find.

  The strange part is that if I listen to Internet radio, the computer\monitor is all the time.

  Can someone help me with my problem?

  Hello

  Check the following points.

  Open windows control panel, open personalization, click on the link on the bottom right and in the next window, screen saver set time "Wait" to a more acceptable figure and Remove the tick in the box next to "in curriculum vitae, the logon screen.  Click on apply, then Ok to save the setting.

  Kind regards

  DP - K

• Problem with closed Options!

  Hello

  We hope that you do very well.

  1. When I click to stop down button 'Start' just 'disable' & 'Restart' option is visible and active. 'sleep' option is hidden. How to solve this problem?
  2. In the power options, when I close the lid only 'do nothing' is visibele, "hipernet" is not visible. PL. help me to solve this problem.

  Thank you best regards &,.

  Vimalathithan.S

  I'm doing much better, thank you.

  If your buttons Stand By and Hibernate in the menu or shut down the computer are missing, gray out or inactive:

  The options in the menu already worked shut down correctly before?

  Have you recently installed, reinstalled, updated or repair your Windows XP?

  Has anything on your system that has nothing to with your video display or monitor?

  What do you think has happened since the last time the options in the menu to stop the computer was working normally?

  If the buttons used to work and if you have just installed Windows, reinstalled Windows, doing a repair installation, used a system restore point (or other things in that sense), you will probably need to update your video drivers as well to restore the function of the buttons.

  If the video drivers on your system are not correct, these buttons often will not work.

  Usually and easy to check and correct, is the video drivers for your system that must be downloaded to your global manufacturers Web site. Download the correct (recent) video drivers for your graphics card, install the correct video drivers, reboot your system, and then test.

  If you can not know how to check if your video drivers are correct, may not know how to get to the World Wide Web of manufacturers or can not know what to do then, maybe we can look at it for you if you provide more information.

  What is your system brand and model?

  What is your version of XP and the Service Pack?  There are difficulties of hibernation in Service Pack 3, so if you do not have SP3, you must be.

  If you are not sure what you have, that:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click Edit, select all, copy and paste then return here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete it.

  This minimize back Q & A and eliminate guesswork, trying things and assumptions.

• Problem with power settings during the opening of Windows Media Player 12

  Original title: power options Windows Media Player Exchange

  WMP 12 of opening causes the power option for monitor turn-off time to return even if the time is 2 hours 15 minutes. Tried to reset the value, value save, all electrical energy plans by making the same, nothing is done.  Other set values, for example disk hard turn off (never set) will be defined and stay together.  Would have someone seen this kind of thing?   Operating system is Win7 Professional 32-bit.  All available updates have been installed.

  Hi Jim,.

  Please contact Microsoft Community. I understand that you have a problem with the power settings when opening Windows Media Player 12. I've surely you will help solve this problem.

  To better understand the issue, I would need more information on your side.

  1. The problem only occurs when Windows Media Player is opened?
  2. Did you the latest changes on the computer before this problem?

  This problem might have occurred because of these reasons:
  1. incorrect power settings.
  2 conflict between third-party applications.

  I suggest you try the steps listed here and check if it helps:

  Method 1:
  Run Troubleshooter of power that will check if the basic power settings are set properly or not.

  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2:
  If the problem persists, restore to the default settings for power management. Check if it helps.

  Note: try the following steps only if you have not tried before.

  Step 1:

  To restore to the default settings power management, follow these steps:

  1. Click Start.
  2. In the search programs and files box, type cmd.
  3. Right click on CMDand then click run as administrator.
  4. At the command prompt, type powercfg - restoredefaultschemesand then press ENTER.
  5. At the command prompt, type exit to exit the command prompt.
  6. Restart the computer.

  Step 2:

  Once the plan of power reset by default, you can create a new power plan and the same customize according to your needs.

  Power plans: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/power-plans-FAQ#1TC=Windows-7

  Method 3:
  If the problem persists, set up the computer in a clean boot state, and check if that helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows:
  http://support.Microsoft.com/kb/929135/en-us

  Note:  After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Unusually slow MacBook pro, as well as problems with power.

  I'm looking for help on setting my Mac, any help from anyone would be great!

  Recently, my MacBook Pro (running El Capitan) at the end of 2013 model started running really slow unawares (before that it was perfect). No hardware or software, changes began to really randomly goes slowly. My mac has always very well maintained, regular clean ups of junk, utility to check disk done often, no useless apps or data.

  Other questions, I'll have with power up the mac off is when I press the power button to turn off it starts then a few turns (don't not even to Apple to loading off-screen, shines the screen but then powers), I have to hold the power button for 10 seconds approximately to get power properly, when I close the lid without turning off then open it I went to the login screen instantly but then close the book Mac downs completely.

  I ran the Apple Diagnostics, no problem. I also ran repair disk utility, no change. I even did a clean install of the operating system and there was a very minor change, but always far make the level it's at.

  Thank you

  A slow Mac may be due to not enough available storage space.

  Click on your Apple  menu at the top left of your screen.

  In the menu drop down click on about this Mac , and then select the storage tab.

  Your Mac is the bare minimum needs 8 GB of storage available just for the operating system not to mention all your personal data.

• Seriuos problem with power supply

  Hello, im new and I have a seriuos problem with my computer toshiba laptop satellite there is a problem with the end power cable the cable that goes to the laptop the caches on a metal stick and once the stick came out with the cable and I lost, is there a way to fix it or get the stick somewhere? I can't charge my laptop without it and sorry for my English: (of cause.

  These problems must be handled by authorized personnel only, so I recommend you to contact the nearest Toshiba authorized service provider and ask for help.

  The laptop must be disassembled and DC in port soldered to the motherboard or may be exchanged with a new one.
  You think you can fix it yourself?

• Smart Safari search bar, problem with the option 'include suggestions for Safari '.

  Hi all

  I am facing a problem with the search bar Safari Smart of yesterday (January 26, 2016).

  The search bar doesn't work anymore, I can't type, or search or write an http address either. I can only navigate by selecting a bookmark.

  Go to preferences I have all the people with reduced mobility and the disappearance of the problem.

  Then try to isolate the problem, I've found it comes to the "include suggestions of Safari" option in the smart search options.

  Anyone had a similar problem, or have any suggestions on how to get it back to life?

  I must say yesterday, everything working, I have not installed anything new on my Mac.

  Thank you very much!

  Kind regards

  S. Luca

  Try the following steps:

  A possible solution to the problem of address bar: disable the Safari Suggestions

• HP Pavilion G4 1310AU: problem with power supply for laptop HP Pavilion G4 1310AU

  Hi This is my first thread in the toms hardware, I have problem with my laptop power supply. my laptop cannot turn on if I remove the battery and use the charger only, but if I use my cell phone battery can turn on without problem for my laptop to use the battery to turn on and after my laptop that works and I remove the battery my still laptop running with the charger plugged, and that I charge my phone when my battery<80% capacity="" e.g="" on="" 40%="" battery="" power="" my="" laptop="" underclocked="" processor="" speed="" to="" 800="" mhz="" from="" 2.5="" ghz,="" i="" have="" changed="" power="" management="" in="" windows="" setting="" and="" amd="" catalyst="" to="" running="" full="" speed="" when="" plugged="" in="" and="" charging="" but="" my="" laptop="" still="" underclocked.="" i="" have="" updated="" my="" bios="" with="" latest="" version="" but="" still="" underclocked.="" after="" 100%="" fully="" charged="" my="" laptop="" processor="" running="" in="" full="" speed="" at="" 2,5="" ghz...="" other="" that="" no="" issue="" in="" my="" laptop,="" everything="" running="">

  I'm never use my laptop for 3D games, most of use for the office, watch video, listen to music and navigation

  My computer laptop specifications
  AMD A4 3305M 1.9 Ghz Turbo up to 2.5 Ghz (TDP 35watts) (Dual Core)
  2 GB OF DDR3 RAM
  HARD DRIVE 500 GB
  DVD RW
  Bluetooth
  14 "monitor

  What is my charger underpower for power to my laptop? my charger is genuine HP with 65 Watt (18, 5V and 3, 5)
  should I buy charger 90 watt (19V and 4.74)?
  or my default charger? so, my charger not Power not in 65 Watt as a specification written in but less than 65 watts running?

  Thank you

  Sorry for my bad English

  Hi @Dana88 ,

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  I understand that if you remove your battery, you can't boot up your laptop.  This is not unusual. some laptops are set up in this way.

  I understand that when you have the phone connected and charge the batteries of your performance is lowered.  There is more than one draw powere when it loads to the battery.

  Here is a link to the laptops HP - test and calibrate the battery (Windows 7) to ensure that there is no problem with the battery.

  Could also remove the battery once you put under tension.

  You asked questions on the use of a 90-Watt adapter.  Here is a link to HP G4 Notebook PC Maintenance and Service of Guide.  Chapter 3 page 32 lists not one that is recommended.

  Good luck!

• Problems with click options on the pinned taskbar programs

  Hi all

  Today, I met a strange problem with my taskbar of Windows 8. If I try to right click on one of my pinned programs in the taskbar, then select one of the options (for example right click on FireFox and select open a new private window), my laptop stops briefly and background become purple. After a few seconds the bottom will return to normal, and I'll be able to click again on programs. A left click on programs still allows me to access it. Anyone had experience with this issue? Thank you.

  Thank you! [The problem seemed to be with a recent update because the system restore fixed everything, but if it happens again, I'll be sure to try this first:]

• Problems with the option in the corners

  I seem to have a problem in Indesign CS5 with the options in the corners. The feature does not work all the time with the "rounded corners" drop and when, so only a slight turn happens to more independently values of that type I. I also tried the manual option, and everything worked on larger forms, even in this case it is not to cut corners beyond a certain point, which means that I can't round the ends of a box entirely. Is there a limit to the round corner tool that was introduced for some unknown reason, or is there a secret method?

  You use the script? It is in the sample scripts that are installed by default. This isn't the same thing as an object > rounding Options...

• Updates cause problems with power settings

  Since the last update flash drive, my power setting is denied.

  It's on white screen after 10 min. of no activity. After viewing something with flash player, when my screen is supposed to be empty, it white for a split second just now and to do this, every 10 minutes (the time period I put). I then go into the display properties > screen saver > power settings and reset her turn off monitor option. Can you please give me a solution for this?

  I asked this question in January and got a response to uninstall and reinstall the Flash Player (if anyone from Adobe is preparing it - file for my application number has been 181390787)
  That fixed the problem for a while (until the next update), but now it is happening again.  I can't find a way to return to the customer support portal and submit the problem again.  I can enter the portal and read my case closed, but I can't open a new one.
  This gets really annoying, I discovered a lot of video tutorials that use Flash Player and watch You-tube frequently.  Whenever I discover something with Flash Player, I have to reset my preferences of power.  I really hope someone has a solution for this, what happens now to the computer of my husband as well.  The two systems are:

  Browser: Microsoft IE 8, operating system: Windows XP Professional SP3

  Thank you

  Maybe I finally found a solution, after weeks of tests!

  Also, if you do not have a selected screen saver, you must set its longer time than the monitor turned off.

  To do this, in control panel-> display-> screensaver-> choose a random screen saver-> don't set a loooong time (example 60 min, but more and more that your monitor off time)-> select any screen saver-> and save.

  I really do not know why, just do claim that there is a conflict between flash, screen saver settings and power, but this solution worked for me!

  Let me know if fix you the problem if you read this.

• problem with power switch only works a 'cold' start after pushing several times.

  Original title: power switch problem

  The power switch on my computer doesn't work as a 'cold' start after pushing several times.
  Could I have accidentally re-set one "true or false? spend in the registry while trying to solve another problem?
  Dave

  Hello

  Looks like that the power switch has developed a problem, probably about to fail.

  Whatever settings are they should be consistent and not need to several tests.

  Check with a real computer store (the one that makes its own internal and no service
  leeks and glances at a Best Buy or other stores) or system manufacturer support
  (for systems custom Integrator system and the manufacturer in the case of construction of House).

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• computer won't sleep with power Option

  T he power on my HP Pavilion p6706f P C Option turns off the display but not the computer using a predetermined schedule. Have Windows 7 home Premium system.

  I hope I can answer this for you two. Here is a lengthy tutorial on sleep and problems mode settings.

• Problems with the option full screen

  I am able to use the option full screen, but it is really not full-screen. It fills just around the top of the window, I am in. I see again my tabs open and menu bar and it's really annoying. I was wondering how to solve this problem. I would like to upload a screenshot, but apparently there is a size limit for images.

  Try to rename (or delete) the file xulstore.json in the Firefox profile folder.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Strange problem with Power Saver on my Satellite M30

  My laptop connected via the mains supply, is quite well. However, when it is not connected (i.e. use it on battery), it shows 100% battery up to 90%, when I get an error window Windows "Toshiba Power Saver must be closed, you want to send an etc error report" and then my battery on the taskbar becomes critical - 3%.

  In addition, at this stage, my processor speed slows down (which is notable because applications take longer to load etc.) as if the laptop is happening in energy saving mode. I thought that maybe this is a display error, so I left the laptop on just to see - and turns off 5 minutes later!

  What is a software error or a bad battery? Any help appreciated.

  Best regards.

  Hi John,.

  I think you may have a bad battery, but just to be safe, I would recommend that you recharge the Toshiba power management software, and then check the default settings for the actions to be taken with display brightness, speed of the processor, hard drive, etc. at the various stages of the battery capacity.

  It is normal that the brightness of the screen to reduce in stages, as the battery capacity decreases, and it is also normal that the speed of the CPU to slow down as well. You can change this behavior if you want to leave in the Toshiba power management utility.

  Kind regards