Problem with printer Laserjet 4 M Plus printer

Similar Questions

• Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

  I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

  I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

  I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

  HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

  I consider that a resolution of the post!

• I have a problem with printing on Windows Vista.

  I have HP desktop with Microsoft Vista operating system.  The printer I have is HP Laser Jet P1006.  1 months ago about the computer wouldn't print or download an attachment to an email.  I uninstalled the printer and re-installed, but the problem persists.

  What happened, it was this.  With an email (from gmail.com or hotmail.com) once I clicked 'print', the normal menu for printing that should go up.  Then I clicked 'print', the monitor would show a display of the menu "save under" and showed the formulations of XPS as 1 line and XPS Documents like the following line.  When I chose the option search for a printer and typed in the name of the HP Laser Jet P1006 printer and click "select", the system responded to that file name is not valid.

  Please explain what was wrong and how to fix these problems with printing and download of attached file.

  Hello

  Please contact the Microsoft Community.

  Have you tried to print using a different printer?

  I would have you try the steps of troubleshooting in these articles.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/troubleshootResults/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_e97ce00a6f76436cc859bfdeb053ce01=wsrp-navigationalState%3Daction%253Ddoclist%257Ccontentid%253DK.01.05.02&javax.portlet.tpst=e97ce00a6f76436cc859bfdeb053ce01&sp4ts.oid=3435682&ac.admitted=1402468218790.876444892.492883150

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&CC=UK&DLC=en&LC=en&product=3435684

  Note: I would first try to 'doctor HP Print '.

  If this problem is limited to the HP printer, so I'd like you to contact the respective support]-

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3435684

  We know if you need help.

• Problem with printing in format Adobe acrobat, DC

  Help

  I have can´t open the Printmenu and print my documents in format Adobe Acrobat, DC

  Since some day´s a can´t print my documents in Adobe DC.

  What I did:

  0 reinstall new driver for my printer

  1. New Installation of Adobe Acrobat DC

  2. Installation of the New Apple OS X el Capitan software.

  3. what once again deleting the installation of Acrobat and the installation of new Adobe acrobat DC.

  4. all other software can use the printer on my system.

  Important: before that I had problems with printing works I didn t have had problems.

  What can I do?

  Thank you

  Neugebauer, Germany

  Hi frankn30090339 ,

  Sorry for the inconvenience.

  You can download the latest patch that contains the resolution of this problem.

  Please see this link: failed to print in Adobe Acrobat format

  Let us know if you need additional assistance.

  Concerning

  Sarojini

• Problem with printing pdf from Adobe Acrobat Pro

  Hello

  I have Adobe Acrobat Pro 9.4.3.

  PDF-print has always worked a lot, but all of a sudden, there is some kind of problem.

  After you print a "Print to PDF" built-in excel document in MacOS or Adobes printer I have PDFs corruptet when showing them in Adobe Reader/Acrobat, but MacOS software preview shows them correct.

  So there can't be any problem with printing, but the local preview on my computer using Acrobat or Reader. I don't even use the Myriad in document police, I use Verdana.

  

  You say you use Verdana, but you're not. The error message clearly indicates that you use MyriadPro "BOLD".

  You probably recently installed Mac OS X 10.6.7 update that has a bug with OpenType PostScript as "BOLD" MyriadPro fonts. Use the Verdana or another font TrueType or PostScript, or come back to Mac OS X 10.6.6.

  Discover the problem here: http://www.tidbits.com/article/12078

• Problem with HP LaserJet P1005

  I have problem to connect my printer (HP LaserJet P1005) to my laptop... after a few tries, I managed to install the software and connect both my devices, but there's another problem is stating that the USB printing support is an older USB device and may not work with USB 3.0... What should I do?... some of my friends said that I need to format my laptop... This question were related to Windows 8?... Please help me...

  Hello

  Please write to us with the following information.

  What is the exact full error message you get associated with USB 2 and USB 3?

  According to the specifications of the HP LaserJet P1005 printer, it supports USB 2.0, please see the link below.

  Printer HP LaserJet P1005 (CB410A) - Specifications and warranty

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/problem-with-HP-LaserJet-P1005/9a1fa919-5db4-44e4-b8ff-15a60f19edf5

  But according to the link below, there is a driver available for Windows 8 and 8.1 of Windows that supports USB 3.0. As a result, the printer should support USB 3.0.

  HP LaserJet P1005 printer drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4131&LC=en&cc=us&DLC=en&sw_lang=&product=3435676

  I suggest you to uninstall and reinstall the latest version of the driver and check if it helps. Follow the steps below to uninstall the printer drivers.

  1. Press the Windows key + X , and then select Device Manager.
  2. You can search the printer adapters and expand it.
  3. Right-click on the printer driver and select Uninstall.

  Once you have successfully uninstalled the driver that you can download the driver from the link given above.

  You can also check out the link below.

  Printers supported for Windows 8 and Windows 8.1

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03168175&tmp_task=setupCategory&cc=us&DLC=en&LC=en&OS=4131&product=3435676&sw_lang=#N55333

  Write us to the State of the question, we will help you.

• LaserJet MFP M277dw Pro: problem with printing issue

  We have the model HP laserjet MFP M277dw, we love it, but have been a problem with what looks like small pink flies on one side of the paper when it is printed, is there a setting that turns off or what is the cause, thank you

  UPDATE: took MFP and was checked by techie printer, tried a new toner and does no differenct so he rang HP and they replaced the MFP, it was still under warranty

  Thanks to those who have tried to help

• Problems with HP laserjet 8100 printer.

  After weeks of no problem my hp laserjet 8100 will not print.

  Doc Gets the queue and either; test pages do not print either.

  I have windows 7

  I followed the usual stuff with msc.services etc. but nothing helps

  Please someone help - the only problems I ever is where electronic mechanical meeting! That is, printing, scanning

  Hello

  Uninstall and reinstall your printer by using the drivers and information on the HP website.

  Equip your model number of the printer there for information and troubleshooting for her.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• LaserJet Pro M426fdw: Problems with printing of pdf documents

  Whenever I try to print PDFs in duplex (although occasionally same problem print one page) the first page does not print and on the pages that follow, most of the lines are blackened the right edge in towards the middle of the page.  I didn't notice the problem with documents in other formats, but I always have problems with pdf files, and I have no problem, print the pdf to my other printers.

  Do other normal Duplexes of programs (word, etc.)?

  If so, it sounds Adobe specific, otherwise I would reinstall the printer driver.

• Problem with printer or ink system failure

  I have a HP Officejet 6600, and I get this message:

  "There is a problem with the printer or ink system.  Turn the printer off, then on.  If the problem persists, contact HP. »

  Well, I did it.  I have also run the hardware diagnostic tool, which had me unplug the printer and turn it back on, and I did it a couple of times.  I always get the error message.  I also took printhead of the printer and put back them in.  Does anyone have a solution that might be able to share with me for this problem?

  Thank you

  Melinda

  My problem was solved by the link in the first reaction after my post. I tried power downs and plug the tire, but following this post EXACTLY... worked. The method of pulling on the power cord of the printer with it cleared the error message and everything has worked perfectly since

• OfficeJet Pro 8500 has Premium - problem with printing PDF documents

  My boss has the printer/HP Officejet Pro 8500 Premium has in his office. He had problems with the printing of PDF documents. As a general rule, what print is either unintelligible or will have a black line at the top of many pages, even if it's just a 1 page document. No problems printing on other types of documents, only the PDF files. Is it possible to fix this? Thank you!

  Try the following setting and let me know any changes:

  Adobe Reader, launch the dialogue of the printer.

  Click on Advanced Options at the bottom of the dialog box.

  Check the Print as Image checkmart.

  Click OK to approve and try to print

• HP AIO 1515: problem with printing photo 13 x 18

  Hi I have a problem with the print photo (13 x 18) size she cut in the end of photo I use hp photo creations but if choose 100% size or fullscreen, same result please what can I do;  I am disappoint bought this printer if photo print well

  Please help me

  Hi @nik1,

  I see by your post that the printer cuts off the image when printing on paper 13 x 18. I want to help you.

  According to the specifications of the printer, it does not support this paper size. You will need to use a supported paper size. The largest size is US legal 8.5 x 14 inches.

  Specifications of printer for printer HP Deskjet 1510 and Deskjet Ink Advantage 1510 All - in - One Printer Series.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Problem with printer HP Deskjet Ink Advantage 3515

  Hello. First of all, I would like to wish all a happy new year!

  I recently bought a printer HP Deskjet Ink Advantage 3515. The printer works fine (prints, scans, and copies). There is only one problem with it. It returns me an error when I l ' turn off. This happens very often, but not always, it is a little annoying. The error appears as: ERROR CODE SM_MODULE C 0X02B7C2ED (the error is also shown on the image). I tried to Google the problem but without effects. I don't know what could be the problem. Can someone help me please, because I have no idea what could be the problem. Thanks for the replays.

  

  This problem has been resolved. It was my router D - Link DIR-615 which was causing the problem all the time. When I changed the router to another at the beginning of the printer stop normally.

• HP 6600 printer: I have a problem with printer Hp 6600

  Even if I do not print colors, my motto keep depleting the color cartridges and will not work until all color cartridges are installed. What can I do if I want to use only the black cartridge?, it was so boring.

  Hi @Stork11,

  Welcome to the HP Forums!

  I understand your frustration. However, this printer uses same color inks when printing in black only. If run out you of color and kept black printing only, you provoquerez problems with the print head. FYI, here's the guide to your printer , see page 74. I also linked page to provide information HERE.

  Hope this information is useful and have a great day!

  "Please click the Thumbs up icon below to thank me for having responded."

• Problems with printer D110a

  I am running Windows 7 64 bit. Never had a problem with the printer until today. I installed a new black cartridge HP 60. The alignment test failed during the sweep phase, error says I don't have a pattern of good alignment. I can print, but when I try to scan, the grip of the printer, I can't stop it by pressing the power button. Have completed the task by using the Task Manager. I tried to restart and unplug the printer. Should I try to reinstall the printer? I seem to remember that a new printer driver has been installed recently.

  Thank you

  Rege

  The alignment page was only a black rectangle, no other color. After the reinstallation of the black cartridge, I restarted the alignment test, and it worked OK. The new alignment page had colors next to black. Not sure what happpened, but the printer works OK now.

  Thank you

  Rege