Problem with putting satellite Pro 6000 switch

Similar Questions

• Problems with disk Satellite pro 4200 hard assembly

  I have problems with a Satellite pro 4200.
  The Notbook reads no more disks. Undercarriage I traded the loan, but did not work. Undercarriage is addressed, but it is read the discs is not possible or formatted. Also, an update of the Bios is not possible, as undercarriage reads no more disks.

  CU
  Eltgen

  Hi Eltgen

  Sorry, but it is not easy to tell what the problem is on that path. If I understand you well you have built in a new floppy drive, because the old one was faulty. Am I wrong?

  It will be interesting to know is the new part already used. Perhaps is the new one also defective. I hope that a little light is on if you put the disc inside.

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• Two problems with my Satellite Pro A200

  Hello

  I just bought a laptop Satellite Pro A200 of lamia with windows Vista.
  I found I can't connect to the internet or install hardware such as cameras or printers. The installation of the system software, but the actual hardware does not work. at first, I thought that it was not compatible, but I wonder if USB ports work correctly supposed that no matter what I connect to the top, cameras, printers, mp3 pc can't find the element even if it is automatically install advice?

  Also, I am trying to connect this pc to my existing internet connection on a desktop computer. Any advice on how to do it because nothing seems to work. Cable and wireless and the laptop has an internal modem.
  Thank you

  > I found I can't connect to the internet or install hardware such as cameras or printers. The installation of the system software, but the actual hardware does not work. at first, I thought that it was not compatible, but I wonder if USB ports work correctly supposed that no matter what I connect to the top, cameras, printers, mp3 pc can't find the element even if it is automatically install advice?

  Indeed some older hardware options are not compatible with Vista. But if the 3rd party software supports Vista will not be problem using these devices.
  You know that Vista is a new OS and Microsoft releases patches and fixes regularly very important.

  I noticed this last fix that resolves to many USB issued under Vista:
  http://support.Microsoft.com/kb/941600/en-us

  I recommend the update to the Vista from time to time to fix some bugs in the OS

  > Also, I am trying to connect this pc to my existing internet connection on a desktop computer. Any advice on how to do it because nothing seems to work. Cable and wireless and the laptop has an internal modem.

  As you say your laptop is capable WLan so why you n t use the Wlan?

  I also recommend this site MS how-to:
  http://windowshelp.Microsoft.com/Windows/en-us/networking.mspx

  concerning

• PC Diagnostic tool indicates problem with WiFi - Satellite Pro A100

  Hey all

  Im having some problems trying to connect with my laptop wifi computers.

  Ran tool Diagnostic PC (toshiba) and the result said network fails but gave me no help to identify or reapiring problem.

  If anyone can help?

  Satelittle Pro A100
  Win XP
  512 MB of ram
  HARD DRIVE 60 GB
  ATI Radeon X 1400

  Malc

  Hello

  I put t know what problem you have, but check the status of the WIFI card in Device Manager. After this check, if the card is correctly enabled or disabled. If the map is successfully activated the laptop should be able to see WLAN network. If this isn't the case, I assume that there is a problem with the wireless network card.

  If you want to report us more on your problem.

  Good bye

• Restart problems with my Satellite Pro A200 when my dynadock is connected

  Help!

  I m a little frustrated when I try to restart or shut down to the bottom of my Satellite Pro A200 with my dynadock connection. I always turn off my 1st printer, as this used causes an error message, but the laptop crashes with the XP window...

  I have analog external (I know, anawhat?, but they work) speakers connected to the front, makes no difference whether they have or not. Drive external DRIVE is connected via USB2 port back and my LAN cable. I think I've tried everything, however continue to suffer Frost :)))

  Any ideas?

  Lot

  There may be some compatibility issues with your printer software and software dynadock
  Who knows. A thorough investigation would be necessary.

• Someone at - it problems with the Satellite Pro C650 battery?

  Any other owners have problems with their batteries?
  Even when completely loaded - then unplugged and not on internet, I get less than an hour out of her life.

  Has been using MS Word in the last few days - and had to plug the laptop in an hour!

  Hello

  We need to change and optimize battery usage settings.
  This is possible in power management.
  You can decrease the screen brightness and can change another option which is located in the Windows 7 power management.

  The point is that the battery depends on its use for laptop and you will still notice different battery due to the use of different software and different settings working time.

• What are Satellite Pro 6000-compatible DVD - RW drives

  Hello

  Can someone tell me which dvd rw is compatible with the satellite pro 6000?

  Hello

  It is always difficult to find information on compatible drives due to different master / slave and c - salt settings.
  In my knowledge don Toshiba user manuals t provide such information. OK, I put t know if all don t user manual provide this, but I've found this info in my user manual.

  However. I studied a little someone suggested that the Toshiba SD-R6372 dvd recorder is compatible with Satellite Pro 6000/6100 units.
  I found this on a very popular online auctioneers ;)

• BSOD on my Satellite Pro 6000

  I have a problem with a Satellite of 6000 Pro running Win 98. Whenever it is stopped BSOD with OE of Fatal Exception occurred at 0028:c14785b6 in VXD (01) + 6 000009D CALL21. The numbers vary each stop down.
  Someone at - it ideas of what could be the cause?

  Hello

  These problems cannot be solved with W98 by performing a clean installation

• Satellite Pro 6000 - horizontal line on top

  I have a problem with my toshiba Pro 6000 1.2 Ghz, since I installed the new bios or new drivers windows Toshiba video.

  In fact only 6000 has a screen of 15-inch (and not the 14-inch), and when I start it up I see everything, but with a horizontal line at the top of the screen (which change color, can be white with text mode, being black or blue under windows, etc.). The text screen is pressed by about 2 cm from the edge in text mode (during booting, for example.) Red logo Toshiba at the beginning).

  It seems that the Bios (or pilots, but I do not think because that's also how during startup) does not correctly handle screen 15 inch laptop computer. I installed the version 1.60 of the Bios. I don't remember the version I was using before.

  If I install a 14 inch screen, I don't have the line and I don't have the text squeezed by 2 cm from the top screen.

  According to me, but I'm not sure that the problem is not hardware, but more by a software problem (I hope).

  Thank you in advance.

  Jan

  I don't know if it will help, but in the BIOS, you will find an option called «stretch LCD Display»
  Try to disable or enable this setting

• Satellite Pro 6000: Windows XP installation problem

  Win98SE works well on my Satellite Pro 6000. I put XP on it.
  During commissioning, I see the logo "windows XP pro. But after loading XP, I have no picture.

  Save mode then also does not work, I can't see anything.
  What I've done wrong? It seems that the video driver is missing?
  With the recovery cd is everything works again. (win98se)

  Someone at - it solution to put XP on this laptop?
  Gr. R.

  Hello

  In my opinion, there should be no problem with the use of Windows XP on this unit.
  As far as I know the laptop came with WinXp pro, W2k and Win98SE.
  In this case, all required drivers are available and must be installed in the correct order.
  I assume that the installation and the installation procedure has been authorized. Did you install it on a second partition? You format the HDD to NTFS?

• Satellite Pro 6000: display or graphics card problem

  Hello
  I don't have a model satellite pro 6000. PS600E-01NYE-FR
  1 GHz P3, 20 GB HDD, wireless bluetooth not running XP

  I understand that it is an old laptop but had been treated with great care because I got it.
  My problem is the following;

  Startup of the laptop is a route very well, but for some reason together and after no set amount of time the display fails
  a wot is visible on-screen is hundreds of tiny colored blocks, sometimes random horizontal lines
  but nothing is readable, at all.

  I tried to run a yellow one also using the video output external monitor, all appear the same.
  a computer display (although I can't check it out) to freeze.

  I replaced the heatsink fan as a precaution (using the new dough)
  the only solution I can find is replaced the ram with
  2 x 256 MB Sync 133 mHz module Samsung. This could be the problem or can anyone shed some light on this for me.

  Thanks in advance
  Display Toshiba SP6000 (?) Problem

  I am not a technician, but I assume that there is probably a problem with the video card. I'm afraid there is not much to do. You should contact the service and make them run tests to verify the functionality of the video card. If the card is faulty, just replacement will help.

• Updated by Satellite Pro 6000 with a DVD burner - technical question

  Hi all, I just bought a DVD burner that is adapted to the Bay of selection to replace the old DVD player...
  He came 'naked', so I thought I'd just disassemble the frame of the old drive and put it on the new...

  But: not the slightest Phillips screwdriver will integrate these screws; in fact, they look very special and I do not know how to remove...
  Should I have any instrument/tool special and if so, where do I get it? Maybe I'm too blonde...

  Someone here who can help?

  Thanks in advance! lionesse62

  Hello

  You need a special screwdriver to remove the module bay select (CD/DVD drive).
  A 2 mm screwdriver Phillips, a pilot of flat blade screw 4mm and a LHSTIX of 4mm screwdriver.

  I think you should visit a laptop computer technician if you n t have the right tool to remove these screws.

  However, if you want to remove the module bay select the Satellite Pro 6000 laptop then follow this instruction;

  (1) turn the computer
  (2) when the lock screw is in the locked position, remove the screws and fix it on the hole to keep her temporarily locking screws.
  (3) slide the lever and pull place the selectable bay module.

  After you remove the DVD rom, you need to remove the connector and the connector cover. The connector cover is fixed with screws of black 2M2x8 liaison.
  The frame is blocked with five super flat head white M2x3 screw.

  As I said, if you can not remove these screws and then ask a technician for help.

  Good bye

• Satellite Pro 6000 RAM upgrade problems

  Apologies for multiple - originally, I put this in the Satellite rather than the Satellite Pro series Forum.

  I have an old Satellite Pro 6000 that has 256 MB of RAM in it, and accordingly, as he tries harder sound, it is not the fastest machines.

  I want to increase the RAM to 1 GB, which I believe is the maximum and 2 sticks of memory of 512 MB PC133 CL3 3.3V, which I think should work fine.

  However, I tried to install either as a pair or separately, with the 256 MB of RAM, and when I put the memory in, the PC resolutely refuses to start. The lights of power lights, but it is only it works.

  I put the original 256 MB of RAM in the slot, and it works fine.

  I'm something wrong or missing something?

  Any help appreciated gratefully.

  Hello

  > Am I something wrong or missing something?
  Of course, you use the memory bad or is not compatible!

  Initialization not after an upgrade of memory is a common behavior if the modules are not compatible or do not work.

  You can upgrade the memory to 1024 MB (2x512MB) max and page Toshiba should run these modules:
  PC133 512 MB (PA3108U - 1 M 51)
  PC133 256 MB (PA3086U - 1 M 25)
  PC133 128 MB (PA3085U - 1 M 12)

• The Satellite Pro 6000 motherboard is compatible with the satellite Pro 6100?

  Hello, need information about mainbord...
  Is the the same Satellite Pro 6000 and 6100 mainbord?

  Satellite Pro 6000 belongs to the PS600E series, and it supports the Celeron and PIII-M (Mobile) processor.

  The Satellite Pro 6100 belongs to the series of PS610E and supports the CPU P4 - M (Mobile).

  The two laptops are very similar so eventually Sat Pro 6000 motherboard could enter Satellite Pro 6100.