Problem with rear camera

Dear team,

It comes with the rear camera on my phone (when using camera flash only):

  1. He died while taking snaps with rear camera with flash, even when the battery is charged to 100%
    • Then I have to wait a few minutes to revive or get it charged by data cable for immediate departure.
  2. on the other hand, if I don't use Flash while using the camera, it works perfectly (for example, you can click snaps as much as you want).

Already tried troubleshooting steps:

  • I restored my Iphone 5 using itnues, for about 5-8 times, but still the problem is not resolved.

The team can help out me.

Looks like a hardware issue not software if you have already restored the iPhone

If you have apple care take it to an Apple Store to get it looked at,.

If you do not bring to the closest repair shop and tell them of the problem

Tags: iPhone

Similar Questions

  • my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

    my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

    The Japan is by far the only country where the shutter is forced to be on

  • Problem with Chicony camera on Satellite A200

    Hello

    I reinstall Windows Vista on my A200 PSAE6E
    Windows SP1 update
    and installed the drivers of all the

    I have a strange problem with my cam.
    When I start with the blue led camera assistant software shines, I can see an image (the image is not clear) for 10-20 seconds and then everything is black.
    I removed the camera assistant software and install again, but its still the same
    Device Manager showing me that everything is ok with Chicony USB 2.0 Camera

    Can anyone give a suggestion that do I do?

    Thank you very much

    You must install all the Vista updates... and I mean all THE Vista out!
    Then update the webcam software and clean the operating system using the CCleaner.

  • Image problems with the camera on the Satellite A200 - 14 d

    2 days ago, I bought my laptop and the image on cam doesn't seem right to me. It's a little blurry, as very many lines through it. It resembles nothing of the image from a camera with 1.3 Mp should look like. It's even better on my old cam... I tried changing the settings but nothing works.

    Anyone know what the problem with my camera? Please help me because I do not know what to do...

    Hello

    As you said, it is a 1 pixel cam. 3 MB and you should not expect too much of this cam.

    But you can change some settings to improve the quality of the image
    Check the options in the "Assistant camera".
    In the "Properties", you can define Image settings like sharpness, contrast, saturation, etc.
    The quality of the image also depends on the standard photo as jpeg folder, bmp and the size of the image.

  • Problem with zoom camera for blackBerry Smartphones

    I had no problems with my camera so far. I got the Curve 8310 for 3 months and now all of a sudden the camera won't zoom. can anyone help me this.

    I had the same problem with my 8310 that I solved it by removing the battery for a few seconds and then replace and reboot... zoom doesn't always from time to time, but restarting always sorts

  • Problem with the camera as being incompatible with Windows 7 driver

    Hi all
    I have a problem with my Logitech camera - Logitech QuickCam communicate, actually.  Just don't/do not upgrade to Windows 7 in 64-bit mode.
    Any suggestions on how to fix? I'm a little bit ticked off without going through the camera work

    Logitech has not published nay drivers for windows 7.

    http://Logitech-en-AMR.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/std_adp.php?p_faqid=13985

    Logitech has released software updates for many of their devices.  Communicate Deluxe, Communicate STX and communicate the MP are listed as being supported in Windows 7.  Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

  • communication problem with smart cameras

    Hello
    I am currently using VBAI 2010 with my smart camera and for the exchange of variables I use the function CNVCreateWriter to contact CVI 2010. It works fine when I'm in the configuration interface. I can use and modify all the variables with no problems.

    But when I switch to the control interface I can't modify variables more. By using the CNVCreateWriter function, I get the error message: RUN-TIME ERROR NO FATALE: "Camera_Api.c", line 130, col 14, 0x0000107C thread id: CNVCreateWriter function: (is-6345 return value [0xffffe737]). Cannot complete the operation within the specified time

    Someone know why it works in the configuration interface, but not in control in the real world interface?

    by the way: I can't use VBAI 2011 right now because we do not yet have a license for it

    Thanks in advance
    Oliver

    In configuration mode, things run slower on the smart camera because synchronize us execution with the update of Windows information on execution of State step, etc. When you run in inspection mode, it runs as fast as possible, so it may not be as many processor available time to process access requests to your application of C variables. Is the acquisition of your inspection triggered images or go faster the smart camera can possibly go (i.e. not triggered immediate mode)? If you're in free run mode, what happens if you change to wait next... This can give the processor a little more time to update the variables requests while he's waiting for the image to be acquired. Another way to test this theory would be to put one step behind in your inspection and see if it works (starting with 100ms and if it works, check out how small you can do).

    Something that could also help is to define the variables on your host machine and in VBAI a variable of network that binds to the variables defined on your PC. In this way, the variable engine shared on RT doesn't have to manage the updates from your PC, as well as updates of VBAI, as well as the execution of the inspection as soon as possible, and your C application should not have problems to access the variables on the same machine. This means that your PC needs to be up and running when your control is running on the smart camera or there is time-out errors to access variables... but this may be good for your application. Here is a nice document that speaks in depth of shared variables.

    http://zone.NI.com/DevZone/CDA/tut/p/ID/4679

    Another option could be to use TCP, series, Ethernet/IP, or some other variable VBAI read/write Protocol.

    Hope this helps,

    Brad

  • Problem with Adobe Camera Raw, Nikon D750, Photoshop CC 2014

    I have Photoshop CC 2014 running on a ZBook 15 HP with Windows 7 Professional. I recently downloaded Camera Raw 8.7.311. I have not installed the DNG Converter. I shoot in raw in my Nikon D750. I have download the NAVE images for my HP laptop using a memory card reader. I installed creative cloud bridge. When I check in Photoshop CC 2014, it says that the Camera Raw plugin 8.7.1.311 is present. But if I try to open a picture from the NAVE, it fails and says it is an unsupported file type. When I'm in Bridge, the option 'Open using Camera Raw' is faded and cannot be selected. Then what should I do? TIA, Rob

    Success! My problem is I had the old version of the Nikon software on my computer and I used to upload photos. I copied the NEF files directly from my memory card reader and then could not open no problem in Photoshop CC 2014. Thanks to gener7 and everyone who made suggestions.

    Rob

  • Problem with 3d camera tracker and stabilizing of warp

    Hi all, I have after effects CC, when I use Tracker camera 3d to a text that stay in the same position with the movement of the camera, the plugin works fine. The problem appears when I stabilize the scene with the stabilizer super string plugin, because the text starts to quiver. What can I do to use these two plugins at the same time? Thank you very much.

    You cannot apply both to the same layer. You have two options:

    1. (best option for an efficient workflow in a draft heavy effects) Warp stabilize, make a DI (digital intermediate) and then replace the original footage with the stabilized film
    2. (or a larger file by far for the ASP and potential problems abound) Warp stabilize, pre compose, then camera follow the model of pre.

    Unless the shot is very short and you do plan to do a lot of other things for once, I'd go with the first option.

  • snapshoot problem with his camera or sound problem

    I bought a used iphone 5 and I cannt turn the sound off snapshoot. silent swith is activated but sound is not turned off (... help me please what can I do...?)

    With the open camera app - open the "secret" key until the orange Strip shows

  • problem with the camera integrated for lenovo sl 500 with windows 7

    Hey guys! I have lenovo sl 500 and ive recently installed windows 7. The problem is that I can't open the built-in camera. The thing is that it turns on automatically when I use Skype and the device manager says that the camera is recognized as well... it seems I don't have drivers and the device works. I just need to know how I can start, someone can help me...? [Thank you in advance:]

    Hi skakalet,

    There is no button 'ON' or 'OFF' for the camera. You will need to use a third-party program like yawcam to the for use.

    It will be useful.

  • BlackBerry Smartphones do you know what are my problems with my camera and how to solve?

    Mine is Curve 3 G running OS 6. I have 3 years now.

    Never installed any themes. I removed all languages, except for English and mandarin. Obtained third-party applications, which are whatsapp and screen grabber. I also youtube, twitter and yahoo messenger but I think that they are developed by rim. I uninstalled the default games from the early days, owner of the device and never install others. I also removed the maps and the world of blackberry. In any case, they are useless.

    I don't store a lot of pictures and the ones I did on my ram external 2gigs. I have not all media files. Just the default values.

    I join 1 group and it's not active. I don't have multiple conversations. I end conversations as soon as they are finished. BBM contacts grow about 1-2 monthly and phone books from 3 to 5 every week. I am a seller.

    I delete e-mails from the unit as soon as I finished reading the. Never navigation because the browser kills each front page loaded completely, making me unable to use youtube.

    I remember regular cleaning to run hourly.

    I do battery pull everyday because I'm tired of waiting for the clock or the gel to disappear, which could take more than half an hour if I let them which of course eventually crashing.

    Never have data backup because the device freezes the second I connect it to the PC with desktop blackberry on.

    So the question is do you know what are my problems and how to solve? Because I did not.

    Hello

    Well... We must memory cleaner is enabled, this feature is known to cause many problems!

    Try a battery pull reboot and let us know.

  • BlackBerry Smartphones Blackberry Curve 9300 3: Problem with the camera without flash and don't take pictures

    Hello!

    I have a Blackberry Curve 9300 3 phone. Until recently my camera was working fine that is the camera takes pictures. But recently I can't take pictures. I can access the camera screen I can zoom in I can see old photos but when I click on the camera icon to take a photo there is no flash and no picture is taken (as a video of tmy note side works fine)

    Any ideas of what can be the problem? Also is it a good idea to remove the battery to fix the problem and if I did so will alll my similar memos, contacts etc. be erased?

    Thank you very much!

    removing the battery may fix some glitches on the phone but it clear files from the DOE.

  • problem with multi-cam and camera angles

    Hello

    I used 3 cameras for a project with free run time code,

    I imported the files of each camera, and I have them renamed with a suffix like cam1 and cam2 cam3

    in first pro, I put a different color of the label of each camera to have an own chronology

    and when I create a multi-cam with time code sequence, I have thousands of tracks (his pro as Prime Minister understand that each item I have a different cam)

    I tried a lot of things, but I can't find a way to group each cam on a track :/

    someone has an idea for me please?

    Thank you

    Premiere Pro treats each element as from a separate camera.  No way around that.

    When you photograph of muticam, do not start and stop the cameras.  Leave them running for the complete event.  Floors and ceilings are better than trying to synchronize dozens of clips.

  • Problem with 3D camera tracker

    Hello

    I want to do a 3d text in my videos with the help of the 3d camera tracker. It didn't work for each vids, but I can use it for some, that's what I don't understand, because I recorded videos with the same software. After thoroughly analyzing and soilving camera it says: "analysis resolve failed", but as I said, for some videos, it works. After he did not work for me, I checked some videos on youtube, like this: Motion Tracking Tutorial | Adobe After Effects | CoD4, CS + - YouTube I want to do with the 3D camera tracker begins in this video from about 0:35 CS Ninjas in Pyjamas - who we are (official music video) - YouTube

    Hope you can help me.


    It will not work. You have pictures of ghosts in there due to the variable framerates in your bullet-time / slow-mo and it completely havok with the logic of temporal coherence. It might be possible if you captured the shot at regular, fixed framerates and then it slowed down in AE, but even in this case, you will need to do the most compatible motion as not to approach objects until they appear full screen.

    Mylenium

Maybe you are looking for

  • boot camp and windows 10

    I'm trying to install 10 Windows with Boot Camp Assistant. I'm exactly as shown in all directions. I have a 2012 end iMac 21.5 ". It has a 1 terabyte internal hard drive. I've updated to the latest version of Mac OS x. I downloaded a legal Windows 10

  • Can not scan using Savin 8045 All In One printer/copier/scanner

    Original title - scanning problems I connected a Savin 8045 All In One printer/copier/scanner of my Dell Vostro 470 computer via a cat 5 cable and router. It prints wireless and locally but not scan.

  • How can I change the color of the cursor?

    Can I change the style or color of my slider. At present, it's an arrow standard white block. I would like that it in a color to see it more easily.

  • Email to Smartphones blackBerry and accounts of BIS

    I apologize in advance for asking for help on a topic that I'm sure has been addressed several times already. But, how we implemented the BB so that the emails from a personal account goes directly to the blackberry device. According to the Deskop Ma

  • Is there a support phone number?

    There is a phone icon in the list 'options' for support but no link to a number to call.!