Problem with remote control in Windows 7 Ultimate
Hi guys,.
I encountered a problem since I upgraded my HP Pavilion Elite m9651me from VISTA to Windows 7 Ultimate 64-bit
the remote control has stopped working & I tried to look for a solution but no luck.
Please can you help me with this problem
Thank you.
Hi Jajomafa,
My problem was resolved a few days ago.
There was that an update of microsoft scored an important in the updates of windows, those I have installed my remote update started woking as if it were before.
The name of the update was (AVerMedia AVerMedia - Streaming Media and broadcast devices - receiver consumer infrared)
I suggest that you run the automatic update.
I hope this helps.
Kind regards.
Tags: HP Desktops
Similar Questions
-
Problem with remote desktop in Windows 7 Home Premium
I have two laptops running Windows 7 Edition Home Premium. I do a simple administration of a 2008 R2 remote server, for a friend and all of a sudden, remote desktop will not connect to the server on one of the laptops.
I checked all the settings, of course, and the problem is NLA. I get the error message: requires NLA (Network Level Authentication) that your computer not only supports the remote computer that you are trying to connect to.I thought it was strange that I never set the server to require NLA. I know I should but anyway... I checked that the server is in fact not the value require NLA, so this should not be preventing the connection.Now, two laptops have DRC version 6.2.9200, but non-functioning LT said that NLA is not supported in the "information" window. Two portable computers support Remote Desktop Protocol 8.0Even if NLA is not required on the server, if it is set to the work of LT, why not at least try? Even if it's just to eliminate a point of failure. None of this is hard, right? Bad...I went in the LT does not work to change the DRC to allow the NLA (System, remote control properties) However, there is nowhere where do... There is an option to "Allow remote access" button and an "Advanced" button. Under the "Advanced" button, there are two elements to control the limits of the use of remote assistance. There is an option button to enable remote assistance and the other to set the amount of time that the remote computers can be connected. Nothing to control NLA. On the functioning LT, which has the same version of the DRC, IT IS A PLACE to CHANGE NLA. I'm confused. How the same version of DRC can have two different menus?Just for fun, I tried even to DRC running in compatibility mode. Nothing...Is there a registry change that will allow me to activate it? I do not always have access to the laptop works. I need to bring both work.Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
Hope this information helps.
-
Problems with sound after loading Windows 7 Ultimate
I just loaded Windows 7 ultimate on my HP Pavilian m7100y. I have no sound, the monitor is an HP vs19c and trendy top speakers. Can someone please.
Hello:
See if this driver works...
Accept the agreement, download and install the first driver on the list if you have installed W7 32 bit, second driver on the list if you have installed W7 64-bit.
-
Problem with LAN adoption of Windows 7 Ultimate
I have laptop HP PROBOOK 445 G1 and I installed Window7 ultimate OS and network found problem.so please suggest how this will work fine.
Hello Ravi,
Thanks for posting your question on the forum of the Microsoft community.
I would like to know some information about the problem so that we can help you better.
1. you receive a code or a network adapter message?
2. have you installed latest drivers network on your computer?
It is possible that the network drivers are not installed on your computer.
To find if there is an error code in the network adapter properties, please follow this link.
Error codes in the Device Manager in Windows
http://support.Microsoft.com/kb/310123I would suggest trying the following methods and check if it helps.
Method 1:
Run the network troubleshooting and check the issue.
See this link:
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7If this does not help, then use method 2.
Method 2:
Please use the suggestions provided in this Microsoft support article and check.
Reference:
Wireless and wired network problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1In addition, please download and install the latest network drivers from this link.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359422&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetokenAdditional information:
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-GB/Windows/fix-network-adapter-problems#1TC=Windows-7I hope this information helps.
Please let us know if you need more help.
Thank you
-
Problem with remote desktop on Windows 7
On my Windows 7 machine, when I try to use the remote desktop connection, after entering the password it waits a few seconds and then hangs with the message: remote connection Deskptop has stopped working. My work around was to use the DRC in the Windows XP virtual machine. I'm working on a new project where I need to access a Windows VPS Server 2012, which does not allow connections to Windows XP running. I've disabled most of the local resources in the DRC but no luck.
Hi Hubert,.
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
TechNet Forum
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
Hope this information helps.
-
Problem with shortcut, opening of Windows 7 ultimate
During the logon process, this view began to appear. I can cancel the notice and the process continues without any difficulty and does no work. Any advice?
Check your startup folder in the Start Menu for a shortcut. Right click and look at the properties
It is extremely likely that it is just a shortcut to an orphan and the ability to remove everything that is needed will be, but you should really confirm 1.
-
Problem with the installation of Windows XP on the Satellite A200-1RK
Hello!
I ve you have a problem with my laptop.
I would like to install Windows XP SP2 instead of Vista, but I had a problem with the hard drive,
Windows XP Installer cannot find the hard drive. It is problem with drivers disk, but the site of tohsiba I can´t find my laptop and the disk for XP drivers.
Why?
Can someone help me?Maybe I can use drivers from another laptop A200 series, but which?
Hello
a good explanation how to install XP on a SATA machine can be found here:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29342Welcome and good luck
-
problem with babylon runing on windows 8-storage initialization failed (error 10)
problem with babylon runing on windows 8-storage initialization failed (error 10)
Hi Shlomy,
1. when exactly you get the error message?
2. do you have an error message?
3. are install you authentic version of Babylon?This issue would have occurred due to some third-party programs, the origin of the problem. I suggest you perform the clean boot. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.
How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.
If the problem only occurs with babylon click here to send a request to the Babylon 8 support team.
Post us the results after trying the steps above.
-
I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)
Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.
-
I have a problem with photoshop cc in windows 10
Hello
I have problems with photoshop cc in windows 10. I am not sure if the problems are related to what windows 19, but certainly, the problems got worse since. (My computer runs on windows 10. At an i7 processor, NVIDIA® GeForce® GTX 965 M, the DDR3L 16 gig memory, the GDDR5 2 GB graphics card, a card of 256 GB ssd and 1 TB of hard drive). I don't think it's a problem with my computer.
I am currently working on a project where I need to cut some parts of the photo, that I will use it later. But I'm having the problem now, some photos displayed as it should. And some are not. They seem to be grey. Or there is some kind of white/gray block above them. It is as if is not available to the loading screen (?). If the object is there, but just does not appear right. I just put a few screenshots here that show the problem. I hope someone can help me with this. Because I can't finish my project with a photoshop which does not work at height.
I really hope that anyone kno w s, what the problem is and can help!
Hi Editjo,
Greetings!
This seems to be a graphics card problem.
Please disable the graphics processor in photoshop, and then try again.
Open Photoshop
Click on edit-> preferences-> Performance
Uncheck use graphics processor
Click OK
Close Photoshop and re - open and then use the way you did that.
Also, please share the exact version of your Photoshop.
Concerning
Jitendra
-
problem with photshop cc monitor windows 8.1 k and 4 to a resolution of 3840 x 2160
can anyone help
I have a problem with photshop cc on windows 8.1 and 4 k display to a resolution of 3840 x 2160 when I launch photoshop cc, everything is very small and I don't know how to get the program to the right size
Install Photoshop CC 2014 and turn on the preference of the user interface scaled by 200%.
-
Problem with the upgrade to Windows 7 Professional to Windows 7 Ultimate
Hello
My Dell laptop came pre-installed with Windows 7 Ultimate 64 - bit version. But there was a hardware problem, and I had to re - reinstall Windows 7 on my Dell laptop. But then, without knowing it, I installed Windows 7 Professional 64-bit (for which I had the key too) & began to work on it. Later, when some drivers were not installed correctly because of compatibility issues, I realized the truth.
Then I tried to update my Windows 7 Professional current operating system to Windows 7 Ultimate-operating system by using Windows Anytime Upgrade without having to re - install Windows from scratch, I have so many applications and data on my laptop now. And I used the key of Windows 7 Ultimate version I have with my Dell laptop. But the key is not be accepted by the Windows Anytime Upgrade application and the following error message is displayed:
"Enter a different upgrade key
The upgrade key you have entered is an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. "
Please help me in this regard to solve this problem so that I can improve my Windows 7 operating system without having to re - install from scratch.
Thank you
Romaric
Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and system integrators or keys, this applies also to VL (Volume License), - MSDN Academic Alliance (MSDNAA) / DreamSpark or pedagogical keys that does not / do support the Anytime Upgrade option. KMS users consult your administrator before attempting to perform an Express upgrade.
The key that came with your mobile PC is an OEM key, which most likely why it fails to upgrade.
J W Stuart: http://www.pagestart.com
-
Is it possible to remote control a Windows 7 laptop with a Surface (RT Windows)?
I wish I could control my laptop running windows 7 with my (Windows RT) Surface since I do a lot of presentation in my work. I tried the Office to distance and Assistance remotely. The main software that I use is Power Point. Any suggestion?
Hi Benjamin,
There is an app in the store of Windows called RemotePresenterView that does what you describe. It allows you to remotely control a PowerPoint presentation running on your laptop using your Surface RT on WiFi. It has an annotation pen, laser pointer, see notes, slide sorter, etc.. Here is a link:
http://apps.Microsoft.com/Windows/app/remotepresenter/5c86fe58-45fe-404F-9f22-bd1192b97aa3
There is also a free version with limited functionality:
http://apps.Microsoft.com/Windows/app/remotepresenterview-free/3fff04d4-a3b8-4567-BA08-2079bb9c708d
-
Toshiba SD - 63HK Home Theater system with remote control problem
I have a Toshiba SD-63HK home theater system. Suddenly, the remote doesn't work this morning - I changed the batteries and it has no effect. Also tried again taking the DVD Player off the coast of the socket and of suite, and this doesn't have to do anything too. Someone at - it ideas? Everyone knows about similar problems with this system?
Guess what; you are the first user of this forum that opened a thread on the Toshiba SD - 63HK Home Theater
This system multimedia isn't known to me, but if your remote has stopped working and the batteries are not the reason for this problem; Then, there must be some kind of hardware malfunction.
Maybe you can order this remote separately try to search on the internet for this part
-
Satellite P500-1DZ starts only with remote control
Hi, I just bought a new laptop Satellite P500 after owning a P200-13Z and P300-160 years without ever having had a problem with one of them.
I have a problem with the P500-1DZ that I bought because it does not start the power button when he was arrested for a period of time, as for example the night.
If I stopped and immediately press the power button its fine and it starts as well with the remote control.
In the BIOS, I noticed that there is an option for remote start to the top of the control that is enabled, but Im a little worried about this deactivation in case I can't restart the laptop... everyone has ideas?
Also for other users of the P500 who are dissatisfied witht the audio output of the laptop, I fixed that uninstall the Audio drivers Connexant HD, then by restarting which allows Windows to install its own audio drivers... which has greatly improved the audio output of the laptop... even if its not as good as the old P300.
Thank you
Hi spidercpfc,
This question really strange s with this start of the issue and I think that it of difficult to say why it happens exactly, but as written Akuma you should try upgrading the BIOS. You can download it from the official page of Toshiba:
http://EU.computers.Toshiba-Europe.comLast week I updated the BIOS of my P500 also and it worked, I t has not had any problems. I updated the BIOS to the version preinstalled Windows as an administrator. Also, I closed all programs running (AntiVirus, Firewall, browser, etc.) and disconnected from the network. After a few seconds the update was done.
After the update, you should also load default settings in the BIOS. So press F9 in BIOS setup and save these settings.
I hope this works. :)
Maybe you are looking for
-
Configuration of the analog output of the controller PCI-7358
Hello world I work with the PCI-7358 during a period of time and now I need to configure the output of the controller for a specific purpose. All I have to do is turn on and turn off the output to an analog 5V DC voltage level. I use a UMI-7774 as a
-
Problem is explicit. After creating a new storage folder it was - for some strange reason - placed under an existing folder in the file storage group...
-
DirectInput don't play games or use ventilation.
I have serious problems and use of wind. More I look and see others with the same problem with Directinput errors, I wonder if I need to reload the operating system or is there another way to fix it with reload them my OS? If so, please point me in
-
Can I install windows xp pro on several computers then with the same product key?
I am the owner of a home-based business and I need to know if I have to buy several copies of a Windows xp pro, or can I use the same product key for all my computers.
-
Running Vista Home Premium SP1 and the system has been slow and freezing. MCbuilder appear to be using 50 to 100% of CPU, and it is a process that seems no way of killing. I disabled in Services, but again, it seems to start without any particular re