Problem with remote desktop in Windows 7 Home Premium

Similar Questions

• Remote Desktop connection: Windows 7 Home Premium 64-bit connects to the computer of Windows XP VPN

  Hi all

  I am trying to establish remote desktop TO my new laptop (Windows 7 Home Premium 64-bit) on my computer (Windows XP) work via a VPN. The VPN Client connects to my network to work with no problems, but when I try to use the remote desktop connection I get an error message:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  Items 1-3 are working well, so I guess that the problem is caused by another issue?
  I'd appreciate any help.
  Thank you
  Lou

  Thanks for your response Al. To answer your qus:

  (1) cisco VPN Client for 64 - bit.

  (2) I don't know how to ping through the VPN tunnel - I don't see this option, anywhere in the Cisco customer (I'm not a professional, just a user)

  (3) Yes. Also, I can connect to the host PC via my old laptop XP (xp) of fine House, just not my new laptop (Windows 7 Home Premium) so the problem must be with my new laptop rather than at the end of the host PC.

  After that you connect through the VPN tunnel open a command window, IE. go in Start > run , then type cmdand type ping DRC-hostname or IP-address-DRC ping.

  Examples:

  Ping lou - pc

  ping 192.168.1.25

  FWIW, I have a desktop computer home wireless Windows 7 Home Premium SP1 64 bit on my LAN that connects fine to a XP Pro SP3 32-bit Wired test machine using [DRC] remote desktop. Now XP Pro SP3 DRC test machine is configured for a static IP address and I have manually configured the network mask, gateway, DNS resolves and made sure that NetBIOS over TCP/IP is enabled in the properties of the NETWORK Ethernet card on the test computer.

  Just for fun, I checked the hashes of file for the file mstsc.exe on the Win 7 Home Premium 64-bit machine and a machine Win 7 Home Premium 32 bit I have and hashes were a bit different as the size of the files. The versions of the files are the same though. I assume that the difference is because we're 64-bit to 32...

• Having a problem with the activation of Windows 7 Home Premium

  Is there a way to "activate" my Windows 7 Home Premium 64 - bit legitely after installing upgrade as full version copy, but it was only a CD upgrade, using the old hard drive to check the previous version of Windows (XP) or do I have to buy a full copy of detail? I own is no longer my Windows XP cd that I had used on the original hard drive I recently replaced due to failure.

  problem solved :).

• Problem with remote desktop on Windows 7

  On my Windows 7 machine, when I try to use the remote desktop connection, after entering the password it waits a few seconds and then hangs with the message: remote connection Deskptop has stopped working. My work around was to use the DRC in the Windows XP virtual machine. I'm working on a new project where I need to access a Windows VPS Server 2012, which does not allow connections to Windows XP running. I've disabled most of the local resources in the DRC but no luck.

  Hi Hubert,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  Hope this information helps.

• Problems with the installation of Windows 7 Home Premium: ask load the driver during installation

  I am currently using Windows XP Professional Version 2002 SP3 with specification of my computer as below:

  Intel Pentium D 3.40 GHz 3.39 GHz

  3.5 GB RAM

  I tried to upgrade to Windows 7 by restarting my computer and boot from the CD. Setup goes as usual, initially, he asked for the language installation during installation, and after I clicked OK, the window titled "Load driver" had appeared with his message as below;

  "To install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK."

  What are the problems really? Because I think I have all the necessary drivers and before that everything works fine. Where can I get the drivers? And how to solve this?

  Help, please. Thank you. :)

  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Connection problems with remote desktop connection

  Good somehow I try to connect to my remote friends computer and it has a windows 7 and I already configured on his computer. I already forwarded Ports on his computer, his static IP, added exception to the firewall, including Norton Internet Security Firewall 2013, so his remote desktop connection is good. But my computer is a Windows Vista Home Premium, but somehow, it wont let me connect it keeps telling in a dialog box with this error:

  Say this 'Remote Desktop disconnected"
  "Try to connect again. If the problem persists, contact your network administrator or the owner of the remote computer.

  But it's is not my friends computer problem, its my computer, I would have never been able to use Remote Desktop on my computer, I have no idea why. I also configured with my router Embarq EQ 660 - R in the NAT rule SUA Port 3389 with my routers IP. But somewhere in my firewall, it doesn't let me use the same TCP 3389 port, it won't let me enter any number of his strange. Well, I have the screen shot a photo so I'll attach the image so you can see what I mean. But I already have my friends computer sent a static router IP configured on him and on his router port everything worked fine, but the problem is mine, don't let me not the port before my router only if I use the NAT option and entering into the rule of SUA, in which I made with port 3389 , and my default gateway static IP.  I also added an exception to my Windows Firewall and also my Norton Internet Security firewall, 2013 including the application, but still somehow, it does not work. On my router, if I try to put the port range: 3389 to 3389. Added the name of Service like RDP, Type of Service: TCP. Also, I made my public computer static IP a little go. A how's my friends computer it works

  Thanks I would really appreciate it

  Hello Cristian,

  I understand that you can not connect to connect to the computer Windows Vista Home premium to Windows 7 computer using remote desktop.

  I wish to inform you that you can not use Remote Desktop connection to connect to the remote computer (host) running the following editions of Windows Vista:

  ·         Windows Vista Starter

  ·         Windows Vista Home Basic

  ·         Windows Vista Home Basic N

  ·         Windows Vista Edition Home Premium

  You can also view the below article for more information.

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions#EI

  Connect to another computer using Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  I hope this helps. If you have problems of Windows in the future, let us know and we would be happy to help you.

• Problems loading the updates of Windows 7 Home Premium

  Hi, I'm new to this Yes please forgive my ignorance. I was very happy user of Windows 7 Home Premium for quite awhile and updates of the software always loaded without any problems. Recently, I made a BIG mistake by taking advantage of the free upgrade to Windows 10. I tried for three weeks and hated it for several reasons, decided to go back to my Windows 7 tested and reliable HP. Unfortunately, and despite the claims of Microsoft, the 'old' system does not install exactly as it was before.

  My task manager no longer exists and every time he told me not to cut as updates windows load (i.e. loading 1 NN updates etc... ") it always ends telling me that there is an error. Then he hangs up and after a long period of time, I am forced to shut down my PC by cutting the freezer (it won't let me turn off, by any other means.

  Can someone tell how can I solve these problems, particularly the second.

  Thank you

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

  Bonus tip: Please do not start in double thread as it may slow down the answer to your question.

• Remote Desktop in windows vista home edition isn't here

  OK, I have a friend on the seas and the home edition of windows vista does not have active Office on his computer, and she needs help with this problem. An admin in our play group and she needs to remote desktop to help us. the research that we have done so far says that this is not enabled in the copies of the home edition. This I ask for is there a way to enable that in its copy, and what can we do about it? I ask you to find additional information for it, but I can put him in touch with yall on here too. We need a fix for this, or a way to fix and how to do it. If its possible? all welcome solutions. Thank you!

  Chris

  Use teamviewer instead. It is easier. Simply install on both, then the other person gives you the ID and the password to connect

• Weired problem with Remote desktop and WLan on Tecra M7

  Hello

  I regularly use Microsoft Office remote to connect to my work PC to my laptop (TOSHIBA TECRA M7 Tablet) home.
  However, since buying (not had long), the remote desktop connection drops and I can't reconnect to the Toshiba laptop.

  It seems that when I connect to the start via Remote Desktop and the connection start screen appears after a short time 10-25mins laptop Toshiba Wifi connection drops.
  When I try to reconnect it does not allow me to do.
  I have to physically come back home and logon to windows XP and then re - activate the wifi.

  I did the following to here.

  1 UPDATE the latest BIOS
  2 UPDATE WIFI INTEL PRO ADAPTER TO THE LATEST DRIVERS
  3. NOT MY BROADBAND, AS PREVIOUSLY, HE WORKED WITH HAPPINESS ON MY OLD LAPTOP.
  4. NOT MY WORKING BROADBAND CONNECTION WORKED FINE BEFORE AND IS STILL WORKING ON THE OLD INSTALLATION
  5. HAVE YOU TURNED OFF ALL THE POWER ON THE LAPTOP AND WIFI PROPERTIES MANAGEMENT, WHERE HE WOULD SLEEP.

  PLEASE HELP, IT IS NECESSARY FOR EMERGENCY

  Hello

  Do you use the Intel Proset utility to configure the WiFi connection?
  Try to configure the WiFi network using this tool and check if the WiFi network would disconnect again.

  I m also interesting this driver Wlan did you use?
  Did you use one page of Intel?
  If this is not the case, check the Intel page for the new WLan driver version.

• I have a problem with remote desktop,

  Original title: Remote Desktop

  has worked before, since the evolution of the modem, it does not work

  Hello

  In addition, I would have you post here as well.

  http://social.technet.Microsoft.com/forums/Windows/en-us/afc828ed-cca2-4AAA-AD77-c61ced66f627/Virtual-PC

  Back to us for problems with Windows.

• Problem with remote desktop access

  Hi, using windows xp service Pack 3. and when I try to connect with the help of remote desktop citrix.it shows error like "the service user profile Service does not log. User profile cannot be loaded. "and sometimes as"the Group Policy Client service does not log. access is denied. "  can any body help on this problem? .

  I tried to solve the problem by deleting the existing user profile and create again new profile, but the issue is not resolved.

  Can I get any solution for this?

  my pc configuration is:

  Windows xp, service Pack 3.

  Thanks in advance

  Hello pcsekhar,

  For this specific issue, please post to the address provided below.

  Remote Desktop services

  http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads

• Problem with Remote Desktop using router WRT54GC

  Hi all.

  My husband and I travel with a computer and an iPhone each, so 4 wireless devices, when we travel, we use the WRT54GC to connect to DSL or broadband from the hotel and then create a LAN in the room using the WRT54GC so we can connect all our devices through the router to the internet.

  Key steps are:

  (1) connect to the router from the hotel to rent a computers IP address.

  (2) do an ipconfig to get the IP address leased the hotel, over the subnet, DNS servers, etc.

  (3) hook a computer into the WRT54GC and give him the IP address and other parameters and clone the IP address of the original computer used to connect to the hotel so that the hotel think that our WRT54GC is the same device.

  (4) connect the router to the wall to talk to the router of the hotel and to connect our devices on wifi LAN created by the WRT54GC and we're good to go.

  Everything works very well and always, but with one exception: we normally use connection software Office Microsoft standard to logon remotely to our computers at home.  We use dyndns to update the IP address of the computer and were marketed in the House so that each computer is accessed through our home router when a query of the DRC between the use of this port forwarding port.

  However, all of a sudden we cannot Remote Desktop our personal computers through the WRT54GC.

  If we put the original computer used to access the router from the hotel directly to the connection to the local network, then there is no problem and that computer can successfully remote desktop, but once we put the router in the equation, we cannot do.

  Any thoughts?  It's certainly something about the configuration of the router, but I checked the firewall and DNS, and those who are not suspects.  The router configuration has not changed in recent years and has always worked previously.

  Any help appreciated.

  Thanks for the tip!

  We have recently started using logmein.com.  There is no charge for simple remote desktop, but the monitor resize and things is easier with it as the version of Microsoft, and for a small fee, you can activate on the management of files, allowing you to do things like file transfer between your home and remote computers easily.  I had tried to do in the past using DRC and it was too slow, but not also with logmein.com.

  That's why we have not been totally freak out the problem, because we had a backup solution with this product, but my husband has a phone in his office, he can connect to while overseas to make calls since in Australia (where we live) while he gets a charge local calls only, and it does not work with logmein , that is why we must get Microsoft DRC will once again!

  In any case, we use dyndns to administer a dynamic update of our IP address for our home router, is to make our computers at home and in a last ditch effort, I had a look at our account and re-joined our IP against our dynamic naming.  Hop, DRC said work again after that.

  It is most strange, because the IP listed was the good IP, but somehow it seemed temporarily do not resolve correctly.

  In any case, it's all fixed.

  At least, it was pretty obvious that it was something somewhere between the router and the House, because of the way he acted. It's usually pretty obvious when your home network has fallen... we knew that is that since we could communicate by other means.

  Thanks for the tip on the other remote tools.  I will certainly check.  There is never too much!

• If I configure Windows XP for automatic logon, then I can't access with Remote Desktop in Windows 7.

  I have Windows XP on my old computer and Windows 7 on my new.

  I have my old computer with auto-logon installation as described in http://support.microsoft.com/kb/315231, when it starts, it will automatically in Windows XP.

  However, if I try to connect remotely from my new computer with Windows 7, I can I connect, but as soon as the old computer hangs on the spot, the automatic connect feature kicks in and the old computer connects again locally, actually expel the connection at a distance in a few seconds.

  Please notify. Thank you.

  I think that this is normal, you cannot establish a remote desktop connection to a Windows XP computer when automatic login is enabled, I believe that this has been changed in Windows 7.

  John

• Satellite P100-487: problem with audio drivers for Windows XP Home 3.11.0.51 - entered

  Hello

  I have problem with this audio drivers 3.11.0.51. The problem is that the output works perfectly but there is no entry.

  When can I expect from the good work on Toshiba support drivers?

  My way to have entry and exit works well is: first install 3.11.0.51 drivers from Toshiba site to install Support Intel 3.14.0.50 and do not restart after the installation. It's hard because every time when I restart the PC I have to for this making begin.

  Anyone have the same problem and found another job drivers?

  Thank you

  HI Supportneeded,

  You gave me the trick with the driver to resolve the problem in the next restart.
  And I replied to your thread Thursday evening at 20:30. Ask you Toshiba phone when we can expect new drivers. (I have a Satego P100-10F) I added a complaint of litte that Toshiba should also support a 'old' OS like XP. And after that at 21:00 the detachment was completely absent.

  Anyway, I tested some drivers of other manufacturers and other Chipsetdrivers, still the same problem.
  the sound with this material does not work on XP due to a rather bad.

  Of course, toshiba brings out a new driver that will feature at the end of February, but now it is March and I see nothing. (stop: a new driver for Windows Vista is online since yesterday)
  I had it installed on xp and the sound is completely down. Whether in - or output.

  you already called toshiba support when they expect our problems?

  Greetings

  [Edited by: admin on March 17, 2007 17:03]

• Problem with Skype desktop snap Windows 10.

  First of all I want to clarify one thing: I don't speak of Aero Snap.
  I want to talk about the automatic ability of Office Skype to align a corner of the screen when it is quite near the corner of the screen.
  Given that Microsoft has made the invisible window borders in Windows 10 (without actually removing them), Desktop Skype seems very strange when broken. It always behaves as if the window border was visible and so we see a gap between the edge of the window of Skype and edge of the screen when Skype is engaged. I know this isn't a huge issue, but it would be still nice if you have patched this flaw on.

  It seems that the latest version of Skype has solved this problem for most. Skype has now aligns with the edge of the screen of the Visual border, not the border entering. The only problem is that he throws still broken by the border entering, but you can break it then manually to the Visual border, which was not possible before.