problem with restart operating system upgrade

Similar Questions

• Wiped a computer due to problems with the operating system, but do not have any media to reinstall. Help.

  No operating system

  Hello

  I bought a second hand computer and there is no backup of the operating system CD. He had problems with the operating system start so I wiped it, but now I have to re - install.

  Would it not possible to obtain another copy of the operating system for that computer?

  All the best

  Dean

  Hello

  These are forums for Vista, so vista information is provided

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Software for printing device Kodak esp7250 does not load as areas appear gray and Kodak said that it is a problem with the operating system 7

  I have problems trying to reinstall my printer software Kodak esp 7250.  The area where you register the software is empty and the Browse button to choose a place is gray, so it will not go any further because if you then choose then says invalid path.  Of course, it's an invalid path because it will not choose an or allow me to choose one.  I contacted Kodak and after working with it for a while, they said it's a problem with the operating system.  I have Windows 7 on a laptop Gateway.  I need my printer and get very frustrated because nobody seems to know how to solve this problem.  I was able to use it when I got to the laptop, but suddenly one day it wouldn't work.  Help, please.

  Hello

  Thank you for your response.

  Make the SFC scan and check the status of the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I would also advise you to check the status of the issue in a new user account.

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!

• PROBLEM WITH MY OPERATING SYSTEM AND LAPTOP COMPUTER PART 3

  Hi all

  I speak not of what I already writtent here on my computer issues have, if you feel lost just report to my previous post below. Thank you all for your help. The following messages appear on the screen of my laptop:

  'msnmsgr.exe file corrupted the file C:\Users\MYNAME\AppData\Local\Temp directory is corrupted and unreadable. Please run the ChKdsk utility "

  "Skype.exe file corrupted the file C:\Users\MYNAME\AppData\Local\Temp directory is corrupted and unreadable. Please run the ChKdsk utility "

  "OSA.exe file corrupted the file C:\Users\MYNAME\AppData\Local\Temp directory is corrupted and unreadable. Please run the ChKdsk utility "

  At some point of time, I got the following message "cannot install required Windows files make sure all files required for installation are available, and restart the installation of the error Code: 0 x 80070571" after trying to reinstall Vista.

  Today, I tried to install WinCleaner OneClick to solve problems has my laptop, but I got this message: Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-B29TV.tmp error 1392: the file or directory is corrupted and unreadable".

  Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-AO2P4.tmp error 1392: the file or directory is corrupted and unreadable".

  Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-819TT.tmp error 1392: the file or directory is corrupted and unreadable".

  Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-UARNT.tmp error 1392: the file or directory is corrupted and unreadable".

  Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-J8ISF.tmp error 1392: the file or directory is corrupted and unreadable".

  When I open the device under Network Manager maps I saw a yellow triangle with an exclamation mark in front of Microsoft ISATAP #2 with a message "the device status this device does not work properly because Windows cannot load the drivers required for this device (code 31)"

  Below, you will find all the information you need to help me solve these problems with my laptop, because I do not have how to keep a current thread. Once again, thank you for your help

  FIRST POST OF THIS THREAD

  Greetings to one and all and I thank very you much for your help to help me.

  I have a laptop Dell Inspiron 1501 with Windows Vista Home Basic AMD Mobile Sempron processor. Recently, I tried to upgrade the free version of my Antivir Avira antivirus for a trial version, but during the process, I lost my internet connection. Sometimes, my network shows another "Local and Internet" and "Local" only. However, in both cases I am not able to connect to the Internet. Whenever I try to open a page in the browser, it is blank and nothing appears on the screen... I also try to reinstall the operating system, but since I can't access the Internet when I reached the point of the process called "GET IMPORTANT updates to UPDATE for the INSTALLATION" where I have to choose between two options a) go online to get the latest updates (recommended) and b) do not get the latest updates for facilities , I can only opt for the other that says that the installation may fail. Therefore, it seems that I cannot even reinstall the operating system. In addition, I often small windows to appear on my screen as "msnmsgr.exe" "skype.exe" "OSA.exe" file corrupted with such messages "the file C:\Users\ myname\AppData\Local\Temp directory is corrupted and unreadable. Please run the chkdsk utility ". However, the problem is I can't run the check disk, because every time I have it try I got the following message "checking file system on C, the type of files is NTFS one of your disks needs to be checked for consistency. You can cancel the disk check, but it is strongly recommended that you continue"until I read the whole message again appears" the disk check was cancelled ". I am not able to get the help and Support Windows open, but on the window I only heard the message "you have lost your connection using Windows and support". I don't know what to get my computer works well and my connection internet back. Someone here tell me step by step what to do to solve all the problems mentioned above? I am very grateful to each of you. Please, note that from my computer I have not access to Internet, so tell me any solution which will take me to use my computer to connect to the Internet. Sorry for the length of my post.

  PS at the beginning of this problem I used to have errors with their code on the screen of my laptop, but unfortunately I did not take account of their > more, for to appear the problem worsens my computer was a bit slow

  SECOND POST OF THIS THREAD

  First of all, thanks a lot to you all and especially to the Lorien-SpiritX and their insightful answers. As they both suggest to me I tried sfc/scannow and I received the following message on my laptop screen "start the phase of checking system scan audit 44% complete Windows resource protection could not perform the requested operation"

  I did also check CHKDSK/f/r utility Office and I received the following message "the type of the file system is NTFS cannot lock drive current CHKDSK cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts "and I answered Yes

  In addition, I tried to use my CD to reinstall my operating, but if it starts well by copying files to the end of the process, when the second stage of the process "expand our files" starts, it stops at 27% and never goes further.

  These are all questions, added to all that I already mentioned in my first post with the same title

  This looks like failing hardware, not software. I would look at the hard drive first, and then the RAM and the motherboard.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If the computer is still under warranty, contact Dell technical support.

  On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.

  MS - MVP - Elephant Boy computers - don't panic!

• problem with the operating system 64-bit client

  Hi, I'm having a problem installing of operating, including windows server 2008 R2 64-bit 64-bit, but even other OS gives the same error

  I tried with vmware workstation 6.5.1 and 7.1.0 from the VW console and check utility also said, that the host is NOT capable of running a 64-bit under this product vmware host.

  My guest operating system is windows XP Professional SP3 32-bit

  the processor is an Intel Core 2 E8400 3 GHz and the support for virtualization is enabled in the bios I looked into it and ran the securable application, he said: "Hardware Virtualization locked IT.

  What could be the problem?

  The VT in the bios was already activated, in any case I turned off the PC too.

  I checked today with the Intel Processor Identification Utility and it says for Intel virtualization technology: No. cannot know what is missing.

  This looks like a buggy BIOS. What system using (name of seller/model). Looking for an update of the firmware on the suppliers Web site.

  André

• Fixed the pc and now problems with the operating system.

  So a few weeks ago I had replaced my motherboard fried and all the rest. Windows claimed to resurrect my computer, my copy of Windows 7 is not legitimate and does not accept my product key. Any advice on how to fix this?

  If your license of Windows 7 comes with the previous motherboard, it is not transferable to a new motherboard.

  If it is a license upgrade of retail that you bought in a store, the motherboard, you take a match it must have a previous qualification licence.

  You can also try the following:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• problems with an operating system

  Theme font & size changer may work with firefox under windows, but it does not work with ubuntu. Not at all.

  so in ubuntu, you can change the font size for Application, Document, Desktop, fixed width and the window title. in your personal preferences.

  but no matter what, using firefox, or no, theme fonts content font size is 8 points.

  It is a known problem.

  Hello

  You can try to set a Minimum font size in Tools (Alt + T) > Preferences > content > Advanced (under fonts and colors).

  Options > content

  Tools > Options

• This application is not compatible with the operating system installed. Please upgrade to Windows 98SE, Windows 2000 or more.

  Hi all

  I recently installed a mod for S.T.A.L.K.E.R SoC V1.004. The game won't start not even, instead, it gives me the following message:

  This application is not compatible with the operating system installed.
  Please upgrade to Windows 98SE, Windows 2000 or more.

  I'm under Win 8 64 bit. I have uninstalled and rebooted twice (both game and mod) does not.

  I have to downgrade to XP to be able to play this awesome mod, he ran on this platform with the same configuration before, why he now rejects it know not only the people at Ms.

  Please help if possible

  Thank you very much

  Pierre Viljoen

  Probably, all in all probably is a 16-bit program, and as such does not work on Windows 8.0/8.1 64 bit. In addition, the game seems to have 20 years or more. You can try running in compatibility mode, but I think that the game is dead. Hope this helps and if you need help please post and we will be happy to help you.

  The above opinion is mine and casually and does not necessarily reflect that of Microsoft, they are employees. or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe"-John Muir

• Why the books are grouped and preinstalled with the operating system?

  It's complaints

  My Portege has Windwosw Vista. I didn't want to buy Vista, but they were only selling with him and no other choice was possible to purchase.

  First of all, my laptop had problems to install Windows updates. I could not connect my institution's Internet System. I had to reinstall the system again.
  It's a waste of time!

  After re-installation of the button for the sound on the outside Panel does not work correctly.

  Also, when I try to stop the laptop sometimes it restarts itself - he doesn't stop!

  Secondly, I had a problem with the laptop, when an opportunity to visit a well-known site, it serves to block itself.
  Once, when he is blocked, I had to restart and its screen remained black. They took for repair. It was delivered later - repaired, but with a defect on the screen!
  What a... workers!

  When I bought this laptop he had an offer with the update of Vista with Windows 7 after their release.
  Wonderful. But just note, Toshiba has the highest price of the offer, compared to its competitors - 30 (or £) against 15 for others, which of course I'm not going to pay.

  I already paid for Vista, which is incredible, and I knew, but I had not choice not to buy!

  All right, so there is still competition in the market, several possibilities are present - install Windows cracked, switch to Linux or just buy an Apple!

  Please, take this comment seriously! And please, stop with group buying, no matter what the benefit is. It won't work for long.

  Hi mate

  Fact is that most of the laptop manufacturers sell the computer and laptop computer with a preinstalled operating system. So I wouldn't blame Toshiba or other brands for which

  You get a new computer/laptop with a new OS.
  During the past 20 years, Microsoft released 3.0 Win, Win 95, Win 98, Win NT, W2k, Win XP, Win ME, Vista and Win 7, I remember that all my computers or laptops were grouped with these operating systems

  Toshiba offers the notebook with a clean image and you can also create a recovery disk (so don t need to buy anything if you need t n)
  Of course, each of us can install a clean OS, but there are a lot of people who are happy with such image pre-installed because everything is pre-installed and configured.

  Many people have no knowledge of computer wide and are really recognizing that everything is pre-installed and the configuration does not have a lot of time

  With regard to the question of the laptop;
  What to say; you had a bad luck that something was wrong with the laptop. This can still happen that my new LCD TV other manufacturer, was dead after two weeks, I called ASP, then replaced the screen now is ok

• When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.

  original title: log question.

  When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.  How can I fix?

  Hi KERRYYX,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. What is the full error message that you receive?
  5. Are you able to restart and shut down the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

• I use a Mac 10.5.8 and your software says it must be compatible with 10.5, but he says it's not compatible with my operating system. Why?

  I use a Mac 10.5.8 and your software says it must be compatible with 10.5, but he says it's not compatible with my operating system. Why?

  10.5.8 it is compatible with firefox only with Intel see 10.0:

  http://www.Mozilla.org/en-us/Firefox/10.0/system-requirements/

  for your ppc mac, the most recent is the version that you have 3.6.26 see:

  http://www.Mozilla.org/en-us/Firefox/3.6/system-requirements/

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• El Capitan 10.11.3 is compatible with my operating system? a MacBook Pro (15 inch, late 2011), 2.4 GHz Intel Core i7, 4 GB DDR3 memory at 1333 MHz

  El Capitan 10.11.3 is compatible with my operating system? a MacBook Pro (15 inch, late 2011), 2.4 GHz Intel Core i7, 4 GB DDR3 memory at 1333 MHz

  Yes.

  El Capitan system requirements

  https://support.Apple.com/kb/SP728?locale=en_US

  Check the compatibility of the application

  http://roaringapps.com/apps

  How to upgrade?

  http://www.Apple.com/OSX/how-to-upgrade/

  Note:

  Computer backup before the upgrade.

  El Capitan works better with 8 GB of RAM installed.

• Qosmio G20 error message: problem with the cooling system has been detected

  I'm trying to fix a Qosmio G20 (which is about 3 years old, it is no longer in warranty).

  Error message: Warning: a problem with the cooling system has been detected.

  I managed to remove the outer case and observe the operation of the machine, and basically one of the fans does not at all. The fan which is closest to the power connector seems to work very well (he seems to be turning a lot, do not know if this is normal), but the other fan who does not seem to move at all.

  When I put in place the case and on the machine, I noticed after a few minutes the vent of the fan working heat sink had warm enough, while led the non-working fan remained cool.

  I cleaned the fan from dust and have also changed the BIOS battery mode mode high performance, but the problem still exists.

  I would be grateful if someone could give advice if the problem is the fan or something else.

  If the fan is the problem, where I can buy a: i live in the United Kingdom?

  Hello

  I think there might be something wrong with the cooling module and the replacement would be necessary.
  Usually, this should be done by an authorized provider (ASP) in your country.

  Technicians could replace it with a new part and also could renew the thermal grease which is placed between the module and the CPU cooling.

  So contact the ASP in your country and ask for later handling.

  By the way; also, you can buy the cooling of the ASP module!

  Good luck

• Error message "A problem with the cooling system" on Satellite A660

  Hi all

  Hope I can get help here. I got about 5 laptop computers HP after each of them had problems and errors. I got sick of them and so got a refund and bought a high spec A660-1FH.

  The A660 is a great laptop for two days until yesterday when I started having a saying of warning message "a problem with the cooling system has been detected. Please turn off the power immediately and return it for service "."

  The cpu fan works fine you can here it turns and the temperature of the processor i5 - 460 m is around 40 degrees for two hearts - that seems normal to me. I noticed that this happens only when running on battery, and if you switch from eco utility to the power saving mode. Its fine when running on the "balanced" power setting The fan is louder before when this message appears.

  Like its less than 28 days my retailer swapped it for a brand new immediately. Got a new home page, and the same message reappears. Everyone knows this. Like two laptops had this, I was wondering if it is normal that the laptop A660 series or if it was really a hardware problem?

  I tried to update the eco utility and the bios of the laptop, but the two are the latest versions. Can someone help or share if they have a similar problem with their laptop?

  Thank you

  In front of me, I have Satellite A660-13 q (PSAW3E) and I have about 6 weeks now. It works almost 10 hours a day and so far I didn't notice this message or anything that may be suspect for the operation of the equipment.

  I put really know why this happen on your laptop and don t think that there is nothing you can do about it.
  I would trade it again. What you can also try is to contact the closest service Toshiba. Make a call, explain the situation and ask if they can help you with this.

• My camera Olympus only works with Apple's Quick Time 7. Is it possible to make it work with my operating system from Windows XP?

  My camera Olympus only works with Apple's Quick Time 7.  Is it possible to make it work with my operating system from Windows XP?

  Apple QuickTime 7 works is because. MOV is the Apple
  QuickTime format.

  QuickTime. MOV files can cause problems with Windows Media Player.
  And... If you plan to try editing with Movie Maker... the files should
  be converted to the. WMV format.

  No guarantee, but the following decoder might allow Windows Media
  Reader to read your. MOV files. Only problem is... it is not freeware to retail.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  3ivx MPEG-4 5.0.4 decoder
  http://store.3ivx.com/3ivxStore/product_details.php?ID=11

  Convert the. MOV files to the. WMV format may be worth a try:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck