Problem with router SPA2102 Battlefield 2?

Similar Questions

• Satellite Pro A10 - Wifi problem with router ZyXEL

  Hello

  I recently acquired a Satellite Pro A10 (PSA15E - 0115Q - EN) off the coast of the friend. It doesn't have a wireless card installed, but I managed to take of a Lucent MPC13A-20 that was installed without any problem, and it is recognized as a Toshiba Wireless LAN Mini PCI Card. However, despite the computer being able to read my neighbors wifi (next door and in the apartment on the floor), he refuses to acknowledge my router, even if I'm in the same room. My router is a ZyXEL P-660HW-T1 v2 which works very well (I tested it with another laptop).

  Can someone please help!

  Thanks in advance,
  Fred

  Hello!

  Make sure your router is using a WiFi standard that supports your card. If you use 802.11n you should drop down to 802.11 g for the tests.

  In addition, you should check the channel of your wireless network card. It should be the same as the router.

  Good bye

• XP sp2 can not find networks (wifi) also connect to the internet. No problem with router as Vista works fine

  my old machine is broken down and wiped xp sp2 off the drive. I fitted another harddrive and reinstalled from xp disc. Installation was bad, so bought a new drive, the Installation went like in a dream, but my computer cannot find all the networks. The wifi dongle works ok (tested on vista) the router isworking well on my vista machine (find 7 networks) parameters must be wrong or the new installation was not so good Mmm tried to reinstall 4 times with the same result.

  Hello

   

  Thanks for asking!

   

  You can't connect to the internet.

   

  1. do you receive any error messages?

  2 what is brand and model computer?

   

  The question may be because the network drivers.

   

  To check that I suggest to visit:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

   

• Nook Color ereader & connectivity problems with router WRT610N

  I recently bought a new Nook color ereader for my wife. As long as a network administrator, I thought that this would be an easy task to configure the ereader to connect with my Linksys WRT610N router on the 2.4 Ghz band. But I'm running problems when connecting. The question seems to have intermittent connection problems where the meals seem to see the wireless network, authenicates, tries to get an IP address, then connects for a short period or removes the signal very quickly while being right on top of the router with the device.

  By the recommendations of various forums of Nook, I had the best luck with the following...

  2.4 Ghz band settings

  SSID: NookNetwork

  Channel width: 20 GHZ

  Standard channel: 9

  SSID Broadcast: enabled

  Security mode: WPA2 Personal

  Encryption: AES

  Passphrase: set out

  Key renewal: 3600

  UPNP: disabled

  RTS: default

  Defragmentation: default

  Tag: default

  However, the problem still resides in an intermittent connection to the wireless network. I also tried various arrangements of the channel to both channels 1, 6 and 11 with my best cponnecting chance to channel 9. I also played with the security and disabled all together and have plugged but always file (will not however run the unsecured network). Also try a tag value of 75, a framework of fragmentation of 2306 and 2307 RTS setting. My computer laptop while run and connect properly.

  I use the latest software updated both on the color of the corner. I am at the end and have searched high and low to get suggestions, and have not yet reached a compatible connection. Please help... Thank you! And my wife thank you in advance! Smiles!

  Mike

  Hi death,

  Thanks again for your comments and your concerns. Really appreciated!

  I took your advice and contacted Barnes & Noble for a new replacement and am waiting for the reception of the new unit as I type. If all goes well, we have reduced the problem and the replacement ends at our misfortunes... smiles!

  I'll let you know...

  Mike

• problem with router WAG54G2

  I bought this model and use it to connect 2 office units and a playstation 3 through the ether, but also a laptop via the wireless link.

  using only the ps3 works fine, using only offices very well works.

  problem using laptop computer while sharing the PS3 network for the most part,

  Using the ps3 and laptop together (ps3-ethernet) computer laptop (Wifi), some time after the laptop is lose the connection with the router, can not access the router configuration page at all and nor i see the network when scanning with computer laptop .This takes place with the help of laptop too but 2 or maybe 3 times during several hours of use. laptop is verified works fine in other networks.

  is my faulty router or simply need some sort of (firmware?) or another update? some config settings, I'm not aware of? p.s even shut down my ps3, my connection with the laptop can be re-established as able to reset my router.

  performed all the settings above, yet his work very well with the ps3 update too.ill if it doesn't work.

• MAC address filtering problem with router DI-624 and printer HP D110

  Just got the wireless D110 printer and cannot connect to the wireless router.

  I have a D - Link DI - 624 Air Plus Xtreme G 2 .4GHz Wireless Router.

  The error message I get from the printer, it's that "address filtering Mac can be activated on your wireless router. This can prevent your HP printer to connect to your network without wire during installation... etc. ".

  The D-Link is configured with WPA - PSK security. If I disable all the security the wireless printer is able to connect. I can't connect the printer to the wireless router with WPA - PSK or WEP same active. There is no connection with the electrician the printer and the router.

  I have connected the router Admin and have repeatedly confirmed that Mac filtering is turned off by going to Advanced Options > Filters > filters Mac > and choose disabled Mac filters. Where is this setting? Why is not able to connect printer?

  In addition, I check the logs on the router and it shows "Wireless PC connected" and "Authentication successful" with a note that has the Mac address of the corresponding hardware address mac hardware of the printer on the wireless network Test report. It seems that the router is to let printing but the printer is not able to communicate for some reason any. It even shows under status > wireless printer is connected.

  When I talked to HP, they said to contact the router company and they couldn't help. When I called D-Link, they said technical support is no longer available for the model. I am stuck, can anyone help?

  Windows XP, tried the front of the printer and USB connection and using the software.

  After a few hours on the phone with the D-Link and HP, the problem has been resolved.

  Apparently, even if that Mac filtering is disabled (set to disabled MAC filters), the Mac address had to enter the router to enable all keeping off Mac filter setting. To me he appeared in the counter intuitive to enter the Mac address, while set to disabled the Mac filter so I wasn't that before picking up the phone with HP. Further on this point, the problem is not going away right after adding the mac address, but rather after the reboot of the router, such as the addition of mac address did not effect, without a reboot of the device.

  HP has been much more useful than a D-Link on it, although it would be nice for HP to add to their instructions and Test report of wireless network to add the Mac address, just in case. I would have tried this step if it has stated that it is acceptable to add the mac address and keep the mac filters disabled.

• Problem with router WRT120N

  OK, so I have the linksys WRT120N wireless router, and I have a lot of problems connecting to internet, when I plug in my router to the modem and so on, I only get to my connection to the local network and cannot connect to my network. But if I use my modem, I can connect to the internet. BTW, I have a cable modem and my firmware is up to date on my router.

  Hi Cleano and welcome to the forums! Please click the link below for instructions on how to configure the router.

  To configure a router with cable Internet Service

• Problem with route on PC with split tunnel VPN

  Hi all

  I have the following situation:

  ASA 5515 X 8.6 running

  I have several inside sub interfaces:

  .10 = 192.168.10.124

  .11 = 192.168.11.124

  .12 = 192.168.12.1/24

  .13 = 192.168.13.1/24

  .14 = 192.168.14.1/24

  Now, I want to implement a VPN IPSec remote access:

  I attribute the range 192.168.99.5 to 192.168.99.50 for VPN clients.

  I have configured the tunneling split for the following networks: 192.168.10.0, 192.168.11.0 and 192.168.12.0

  They are also exempt from NAT.

  So the config looks good.

  The VPN is in place.

  However, when connecting to the VPN, none of these networks are available.

  After troubleshooting, I discovered the following:

  Received my card VPN IP address is 192.168.99.5 (as expected)

  However, when I make a copy of the itinerary, I see the following:

  Destination netmask gateway interface

  192.168.10.0 255.255.255.0 192.168.99.1 192.168.99.5

  192.168.11.0 255.255.255.0 192.168.99.1 192.168.99.5

  192.168.12.0 255.255.255.0 192.168.99.1 192.168.99.5

  The entry door to the routing of my PC table is pointing to a non-existent address, in my opinion it schould be on the same address as my adapter VPN (192.168.99.5).

  I tried this with annyconnect and the classic VPN client.

  Where I'm going wrong?

  No, this ip pointing 192.168.99.1 route is correct. It is not the cause of the problem.

• WiFi problem with router series old netgear wnr?

  my friend has the above router. I can connect but get no data transfer. My Tablet and my friends phones HTC incredible and the droid og work very well.

  We have made general troubleshooting and installed all the updates still same problem complete a connection, but no data. I must point out that my work wifi without flaw in all the other places work home other family friends etc. Any ideas would be appreciated. Thank you

  OK I thought I finally have solved the problem in a simple way. I downloaded WifI farpoc analayer (sp?) in the app store and found a clear channel, then changed the channel auto channel default routers wifi clearer in the House (5 in this case) at the moment I am cruzzing along. Won't be 100% not satisfied until he was at least a few hours, but this is the longest, I've never been able to connect to this router.

• WIFI problem with router WAG120N

  Hello
  I have a router linksys WAG120N upgrade 1.00.16
  and I have wifi problems that while I use wifi on my laptop or mobile then disconnected wifi (wifi on green router, but I can't connect) until I have restart the router
  Can you help me?
  Please, I beg you!

  It could be the firmware is damaged. Firstly, what you can do is set a channel fix (1, 6, 9 or 11). Customize settings wireless advanced: tag set to 50, interval threshold of Fragmentation 2306 & 2307 RTS threshold. If this does not help, make sure you reflash the firmware, reset the router and reconfigure.

• Problem with routing inter - VLAN... How to solve it?

  Hi all.

  I have a WRVS4400N in my office to have a VPN with our main customer and also to manage the entire network of small size.

  In two weeks, more or less we will change our office somewhere else, merge two in one.

  At its new location, we will have two different ADSL connections, and we will keep our separate LAN to the other LAN.

  The goal is to interconnect the two local networks in order to 'see' the machines on one local network to another, but keep the two local networks with their current configuration, subnet, etc..

  To achieve this, I created a new VLAN on the router and I have attached only port4 to this VLAN.

  

  

  As you can see, VLAN main has its own/24 subnet (10.148.145.0/24) and dhcp enabled (for addresses on my LAN) while the new VIRTUAL local network has its own 24 subnet too (10.0.0.0/24) but with the disabled dhcp (is a different LAN with its own DHCP server).

  

  

  

  

  VLAN 1 use ports 1-3 and VLAN 2 use the single port 4.

  Of course, I enabled routing inter - VLAN:

  

  To emulate the future scenario, I connected a router with an Internet port 4 with IP:10.0.0.2, and I therefore two different local networks.

  Well, the reality is this:

  -From my PC connected to the VLAN1 I have an IP address (assigned by my Cisco) and I see all my VLAN and I see 10.0.0.1 too (IP of the router on VLAN2), but I don't see any more (pings to 10.0.0.2 didn't answer). I can access Cisco router to 10.0.0.1 and 10.148.145.97.

  -My PC connected to the VLAN2 I have an IP address (assigned by the other router on 10.0.0.2), I see only my VLAN (10.0.0.0/24 IPs). I can access only Cisco router to 10.0.0.1.

  How can I do to enable these two VLANS to 'see' each other?

  How can I control access to the WAN port? I don't want machines to VLAN2 accessing internet through our router.

  Thank you and best regards!

  Hello Francisco,.

  In router mode gateway mode switch will turn off the NAT on the router. Which will allow to the vlan 2 does not to get out to the internet but also vlan 1 and which is not what you want. You may be able to create access rules and deny rules for not being able to get out of the internet... may create some default of the rules of the road as 0.0.0.0. Also, you may be able to create internet air to stop a certain subnet that it is able to get out of the internet as well.

  Regarding the VLAN talk to each other, everything looks good, routing inter - vlan, it is allowing the two VLAN to talk to each other and which is activated. What your default gateways are installed on devices you are testing? As long as default gateways on your PC and devices are pointing to the routers ip/gateway address, you should be good to go at this point.

  VLAN 1: default gateway should be 10.148.145.97

  VLAN 2: default gateway must be 10.0.0.1

  Other than that everything seems to be implemented correctly based on the images. The VLANs that you put in place on the ports are correct.

  Let me know your devices are configured on the rise and will go from there.

  Hope this helps,

  Thank you

  Clayton Sill

• Problem with routing/circuits between SG300-10 and Dell Powerconnect 5224

  Hello

  I just bought a SG300-10 switch and loaded new firmware 1.27 on it.  Configure my VLAN and trunks, but I have a weird problem that I can't seem to understand.  It may be something small, I'm missing, but no matter, I have been scratching at it all day and I kicked in the butt.  If anyone can point me in the right direction or maybe something that someone see in my config which is wrong, I can get the terminology/theory wrong, after all, I just spent my CCNA :)

  My configuration:

  I have the SG300-10 as my switch and changed over to L3, so it may be my core of my small network.  On port 1, vlan 200 is configured as my unidentified native PVID and I put it to 210(LAN network) to trunk VLANs, 220 (management vlan) on the tag to the Dell powerconnect 5224 24port switch.  On port 1 of the Dell switch, I install as a trunk it as well with the same configuration (vlan native of PVID unidentified 200, 210 and 220 tag trunking).

  I have installed virtual interfaces on the SG300 for each VLAN (vlan 210 = 192.168.210.1/24, vlan 220 = 192.168.220.1/24) and on the Dell, since this is a feature of L2, I changed the vlan 1 to 220 management and assign the IP 192.168.220.2/24.

  Now, since the SG300 web interface, I ping IP management Dell (192.168.220.2/24)successfully and vice versa, can ping from Dell web interface to one of the IP of the bridge VLAN (210.1 & 220.1) successfully so that test, to me, looks like the Dell communicates with the SG300.)  I also have the default gateway of the Dell 192.168.220.1 printer value.

  Server IP: 192.168.220.10/24

  Workstation IP: 192.168.210.80/24

  Now the dilemma:

  I have a server plugged into switch port Dell 2 (configured as 'hybrid' because there is no option to access, value 220 PVID, vlan, worth 220 Untagged) and from the server, I can ping IP management dell very well switch and can ping the IP of the gateway of great SG300 so.  On the SG300 switch, on port 2, I plugged in a workstation (configuration is in access mode, vlan 210 unidentified) who can not ping the server plugged into the dell switch.  The workstation, I can ping all the SG300 interfaces and also the IP management dell but I can't ping the server.

  Any ideas anyone can provide is much appreciated!

  Edition of VLAN.

  Lenell, thank you for the call tonight. It seems that we have found the problem. The SIN, although it is configured with a default gateway, the gateway that brings 0.0.0.0. We also checked the NAS works from the same subnet to connect but fails outside of the subnet. Conversely, we checked 2 computers have no problem to connect through the VLAN level 3.

  I hope we got the right direction.

  -Tom
  Please evaluate the useful messages

• Problem with router network adapter connection

  Wireless running for three months.  Then just stopped.  Tried to reconnect using Linksys installation disc.  When I get to the stage where I connect the network adapter to the router I get message that there is no connection.  The cables are not at fault (checked), I bought a new router and got to step, even once, does not connect.  My cable modem will connect that same network adapter and works.  I don't see anything that has changed with the system to stop smoking.  Any ideas/suggestions

  The system is INS 530 with Broadcom 802.11 network adapter g, Intel R 2 - 82562V 10/100

  Message edited by podrzt on 08/16/2008 21:05
  
  

• connection problems with router wrt110

  I use linksys router wrt110 to connect to internet. I use a latitude e6400 laptop running windows 7 pro. When I start the computer, sometimes it will connect to the home network, and sometimes it will connect to the public unidentified network. When it connects to the unidentified network, it will be about 5 to 10 minutes to connect to the internet.

  I'm trying to figure out how to do it connect to home network all the time.

  any help would be appreciated

  Yes, these settings are also necessary for the WRT110.

• I'm unable to access my Linksys router using Firefox browser version 9.0.1, but had no problem with knowledge is this normal or is there compatibility with Firefox problems?

  I am new to the Firefox browser and just tried to configure my Linksys router using Firefox and could not access my router, but had no problem with Internet Explorer. I was wondering is - this normal or there at - it set I can are wrong to use Firefox to fix my router?

  If you have the NoScript extension or other blocking JavaScript extensions (addons > Extensions), you must allow (or temporarily allow) the IP address of your router. Any particular setting should be held in Firefox itself.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.