Problem with SMTP.
Dear Sir/Madam,
During your stay in Takapuna Auckland, I had to change my smtp.paradise.net.nz in smtp.ihug.net.nz in order to send emails. I have now left Takapuna and changed my outgoing address in the original smtp.paradise.net.nz, as ihug address does work here at Epsom. However, I can't send e-mails more. How could I solve this problem? I hope you can help and thank you in advance.
Kind regards.
John van der Burgh.
E-mail address is removed from the privacy *.
- What email program are you using?
- Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.
Tags: Windows
Similar Questions
-
Problem with SMTP servers that disappear
I've recently updated to the official version of Sierra.
Since then, I can't send mail more.
I have a special setup in Apple Mail: I config a manual counting that iCloud as IMAP for receiving server and Gmail as SMTP server to send. That allows me to have sort of a double synchronization with iCloud and Gmail.
It was working perfectly until that date, but after Sierra upgrade it keeps losing my SMTP server config.
After some instructions on mail and Sierra problems (in this thread: Re: IMAP e-mail accounts went into Mail after upgrade of Sierra), I have built my mail again, created new account, but the problem remains.
What happens is that it continues to lose my SMTP server. I re-entered 20 times or more, save, but she mysteriously disappears. I go to Mail > Preferences > accounts, select my manual counting and this is what I see under "server settings":
Password is missing. Username loses the game ' @gmail.com ' email address and authentication is set to None.
If I'm in all the fields correctly, switch tabs, back: it's all gone!
I tried to remove the smtp server and create a new one, but the same happens.
All faced a similar problem? Do you have an idea how solve it?
Thanks a lot for help.
Gabriel
I have a special setup in Apple Mail: I config a manual counting that iCloud as IMAP for receiving server and Gmail as SMTP server to send. That allows me to have sort of a double synchronization with iCloud and Gmail.
Installation with SMTP servers for each account. THEN in Mail > Preferences > composition select always send from Gmail account.
-
SMTP problem with the recipient's address
Hi, I made a copy of the function of SMTP Email message send to use it with another port smtp (as 587). Everything works well when the recipient's address is like [email protected] or any what normal address. The problem is when I'm trying to use this function to send an e-mail to an address like [email protected]. Each email to the address of the company is like the second example. Does anyone have an idea to solve this problem?
I had the same problem with my mail server @msu.edu.
The problem is that many companies use TLS or SSL security settings.
There are ways around this problem.
I have attached a VI that should work for you.
I can't take credit for the VI, it was given to me by a person on the forums.
I've just modified it a bit.
Edit: If you look at the block diagram, upward, there is a node to invoke.
It's for "SMTP Client", and the element is "host".
You will need to change that to 'mail.msu.edu' to any server used by your company.And you may need to change the port as well.
I also customized the VI icon, but you can leave if you like it
-
Recently I started having trouble with sending an outgoing message. Beyond out lickety split with no problem. Now, once I click on SEND, I get window to send the Message reading "status: connected to stmp.primus.ca...» "but the progress bar continues just to go and go and... rather than a telling me the message has been sent."
Sometimes the email finally gets sent, after taking in "shipping time E-mail" what's FOREVER, sometimes by that email is not to all and I get the message "send message failed. The message could not be sent using SMTP server smtp.primus.ca for some unknown reason. Check your SMTP server settings are correct and try again or contact your network administrator. »
I looked in my SMTP settings and noticed that, in aid of Primus, he said the outgoing server port is 465 while mine has been implemented (and worked for ever) 25. I have also noticed that help Primus said connectivity should be set to SSL/TLS, while that mine has been set (and has worked forever) to zero. I made these changes (first simply by changing the port #, then both) but this does not solve the problem.
I've recently updated Thunderbird to 31.7.0 and I think that these questions CAN coincide with this update, but I am not sure of the time. If this is the case, is it possible that I could get back to the old version of Thunderbird... or move in this way another? ID of the update was not the questions, someone has an idea or an idea on why this would suddenly be a problem with Thunderbird?
Or should I contact Primus technical support and try to sort it out with them?
Thanks a lot for listening.
Your anti virus got an update. We get a rash of these every time updates to Thunderbird. The cause is always an anti virus program. usually, Norton or Alvira, but they all get a mention.
-
I receive the following message if poster when you send an email from Outlook Express 6 'the message couldn't. not sent because the server rejected the sender's e-mail address ' Server: ' smtp - server.twcny.rr.com', Protocol: SMTP, server response: ' 530 authentication is required before sending [R0107005] ', Port: 25, secure (SSL): no, Server error: 530, error number: 0x800CCC78. How can I fix it? TWC tells me its a problem with Outlook.
Technical issues do not belong in the forum Feedback response so I moved your post to the WIndows XP "Netwoking and online" Outlook Express forum where questions are handled.
Outlook and Outlook Express are completely different products and are not related except for the names.
The problem you describe product generally when you have not defined thte option to authenticate your outgoing SMTP server. If you click on tools > accounts, select your account, then click Properties, you should see a Servers tab. This tab is a check box labeled "my server requires authentication". Check it out. Then check the settings button to the right. You'll see two radio buttons. From the top, labeled 'Use same settings as my mail server outgoing' is generally the right to choose.
-
Problem with Nightowldvr. Get the error message 'Connect server out of time'.
Problem with Nightowldvr cannot connect to the mail server
I install Nightowldvr and he'll send automated E-mail messages, but it stops the error message "server connection out of time", using the SMTP format
Bill
Contact the Nightowldvr support.
-
I had problems with windows live mail, I uninstalled it, now I have no mail at all, I was using windows vista
Hello
You can download, install, and configure Windows Live Mail again or use Windows Mail, which is the default email program in Vista.
How to set up Windows Mail.
Contact your ISP (Internet Service Provider); They provide your broadband / dial connection.
Ask them to:
1. your username with them
2. your password with them.
3 incoming mail POP3 server.
4. the outgoing mail SMTP server
All the settings that you need to come from them, not Microsoft; and they are usually happy to help you set up your e-mail program.
You can use this guide to set up Windows Mail:
See you soon.
-
Remember - this is a public forum to not publish private information like email or phone numbers!
Ideas: Object, Protocol: SMTP, Port: 25, secure (SSL): no, error number: 0x800CCC7B
- You have problems with programs
- Error messages
- Recent changes made to your computer
- What did you already tried to solve the problem
I; m sorry, but we don't speak English in these forums.
Please go to http://support.microsoft.com/common/international.aspx and click on the map to find assistance in your language.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I have two problems with IPSEC VPN, using the cisco client, and a third, which I think could answer here if this isn't strictly associated with VPN.
1. cannot access the internet, while VPN is in place. This can be a problem of client as I * think * I've split tunneling to install correctly.
2. cannot access other networks except the network associated with the inside interface natively.
3. I can not ping to the internet from inside, be it on the VPN or not.
I tend to use the SMDA; Please, if possible, keep the answer to this kindof of entry.
Here is the config:
Output of the command: "sh run".
: Saved
:
ASA Version 8.4 (1)
!
hostname BVGW
domain blueVector.com
activate qWxO.XjLGf3hYkQ1 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 10
IP 5.29.79.10 255.255.255.248
!
interface Ethernet0/1
nameif inside
security-level 100
IP 172.17.1.2 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 100
IP 172.19.1.1 255.255.255.0
management only
!
passive FTP mode
DNS server-group DefaultDNS
domain blueVector.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
the subject of WiFi network
172.17.100.0 subnet 255.255.255.0
WiFi description
the object to the Interior-net network
172.17.1.0 subnet 255.255.255.0
network of the NOSPAM object
Home 172.17.1.60
network of the BH2 object
Home 172.17.1.60
the EX2 object network
Home 172.17.1.61
Description internal Exchange / SMTP outgoing
the Mail2 object network
Home 5.29.79.11
Description Ext EX2
network of the NETWORK_OBJ_172.17.1.240_28 object
subnet 172.17.1.240 255.255.255.240
network of the NETWORK_OBJ_172.17.200.0_24 object
172.17.200.0 subnet 255.255.255.0
DM_INLINE_TCP_1 tcp service object-group
port-object eq www
EQ object of the https port
the DM_INLINE_NETWORK_1 object-group network
network-object BH2
network-object NOSPAM
Outside_access_in list extended access permit tcp any eq smtp DM_INLINE_NETWORK_1 object-group
Outside_access_in list extended access permit tcp any object object-group DM_INLINE_TCP_1 BH2
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
management of MTU 1500
mask pool local 172.17.1.240 - 172.17.1.250 VPN IP 255.255.255.0
mask pool local 172.17.200.100 - 172.17.200.200 VPN2 IP 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static source EX2 Mail2
NAT (inside, outside) static source all all NETWORK_OBJ_172.17.1.240_28 of NETWORK_OBJ_172.17.1.240_28 static destination
NAT (inside, outside) static source all all NETWORK_OBJ_172.17.200.0_24 of NETWORK_OBJ_172.17.200.0_24 static destination
NAT (inside, outside) static source to the Interior-NET Interior-net destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
!
the object to the Interior-net network
NAT (inside, outside) dynamic interface
network of the NOSPAM object
NAT (inside, outside) static 5.29.79.12
Access-group Outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 5.29.79.9 1
Route inside 10.2.0.0 255.255.255.0 172.17.1.1 1
Route inside 10.3.0.0 255.255.255.128 172.17.1.1 1
Route inside 10.10.10.0 255.255.255.0 172.17.1.1 1
Route inside 172.17.100.0 255.255.255.0 172.17.1.3 1
Route inside 172.18.1.0 255.255.255.0 172.17.1.1 1
Route inside 192.168.1.0 255.255.255.0 172.17.1.1 1
Route inside 192.168.11.0 255.255.255.0 172.17.1.1 1
Route inside 192.168.30.0 255.255.255.0 172.17.1.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server blueVec protocol ldap
blueVec AAA-server (inside) host 172.17.1.41
LDAP-base-dn DC = adrs1, DC = net
LDAP-group-base-dn DC = EIM, DC = net
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn CN = Hanna\, Roger, OU = human, or = WPLAdministrator, DC = adrs1, DC = net
microsoft server type
Enable http server
http 192.168.1.0 255.255.255.0 management
http 172.17.1.0 255.255.255.0 inside
http 24.32.208.223 255.255.255.255 outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto Outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
Outside_map interface card crypto outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
authentication crack
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 172.17.1.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
dhcpd address 172.17.1.100 - 172.17.1.200 inside
dhcpd 4.2.2.2 dns 8.8.8.8 interface inside
dhcpd lease interface 100000 inside
dhcpd adrs1.net area inside interface
!
a basic threat threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
WebVPN
internal blueV group policy
attributes of the strategy of group blueV
value of server WINS 172.17.1.41
value of 172.17.1.41 DNS server 172.17.1.42
Ikev1 VPN-tunnel-Protocol
value by default-field ADRS1.NET
internal blueV_1 group policy
attributes of the strategy of group blueV_1
value of server WINS 172.17.1.41
value of 172.17.1.41 DNS server 172.17.1.42
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
adrs1.NET value by default-field
username gwhitten encrypted password privilege 0 8fLfC1TTV35zytjA
username gwhitten attributes
VPN-group-policy blueV
rparker encrypted FnbvAdOZxk4r40E5 privilege 15 password username
attributes of username rparker
VPN-group-policy blueV
username mhale encrypted password privilege 0 2reWKpsLC5em3o1P
username mhale attributes
VPN-group-policy blueV
VpnUser2 SlHbkDWqPQLgylxJ encrypted privilege 0 username password
username VpnUser2 attributes
VPN-group-policy blueV
Vpnuser3 R6zHxBM9chjqBPHl encrypted privilege 0 username password
username Vpnuser3 attributes
VPN-group-policy blueV
username VpnUser1 encrypted password privilege 0 mLHXwxsjJEIziFgb
username VpnUser1 attributes
VPN-group-policy blueV
username dcoletto encrypted password privilege 0 g53yRiEqpcYkSyYS
username dcoletto attributes
VPN-group-policy blueV
username, password jmcleod aSV6RHsq7Wn/YJ7X encrypted privilege 0
username jmcleod attributes
VPN-group-policy blueV
rhanna encrypted Pd3E3vqnGmV84Ds2 privilege 15 password username
rhanna attributes username
VPN-group-policy blueV
username rheimann encrypted password privilege 0 tHH5ZYDXJ0qKyxnk
username rheimann attributes
VPN-group-policy blueV
username jwoosley encrypted password privilege 0 yBOc8ubzzbeBXmuo
username jwoosley attributes
VPN-group-policy blueV
2DBQVSUbfTBuxC8u encrypted password privilege 0 kdavis username
kdavis username attributes
VPN-group-policy blueV
username mbell encrypted password privilege 0 adskOOsnVPnw6eJD
username mbell attributes
VPN-group-policy blueV
bmiller dpqK9cKk50J7TuPN encrypted password privilege 0 username
bmiller username attributes
VPN-group-policy blueV
type tunnel-group blueV remote access
tunnel-group blueV General-attributes
address VPN2 pool
authentication-server-group blueVec
Group Policy - by default-blueV_1
blueV group of tunnel ipsec-attributes
IKEv1 pre-shablue-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
HPM topN enable
Cryptochecksum:2491a825fb8a81439a6c80288f33818e
: end
Any help is appreciated!
-Roger
Hey,.
Unfortunately, I do not use ASDM myself but will always mention things that could be done.
You do not split tunneling. All traffic either tunnel to the ASA, while VPN is active
You have the following line under the "group policy"
Split-tunnel-policy tunnelspecified
You will also need this line
Split-tunnel-network-list value
Defines the destination for the VPN Client networks. If you go in on the side of the ASDM group policy settings, you should see that no ACL is selected. You don't really seem to have an ACL in the configuration above, for the split tunneling?
To activate access Internet via the VPN Client now in the current configuration, I would say the following configuration of NAT
VPN-CLIENT-PAT-SOURCE network object-group
object-network 172.17.200.0 255.255.255.0
NAT (outside, outdoor) automatic interface after dynamic source VPN-CLIENT-PAT-SOURCE
In regards to the traffic does not for other networks, I'm not really sure. I guess they aren't hitting the rule NAT that are configured. I think they should, but I guess they aren't because its does not work
I could myself try the following configuration of NAT
object-group, network LAN-NETWORKS
object-network 10.2.0.0 255.255.255.0
object-network 10.3.0.0 255.255.255.128
object-network 10.10.10.0 255.255.255.0
object-network 172.17.100.0 255.255.255.0
object-network 172.18.1.0 255.255.255.0
object-network 192.168.1.0 255.255.255.0
object-network 192.168.11.0 255.255.255.0
object-network 192.168.30.0 255.255.255.0
object-group, network VPN-POOL
object-network 172.17.200.0 255.255.255.0
NAT (inside, outside) static static source of destination LAN-LAN-NETWORK VPN-VPN-POOL
Add ICMP ICMP Inspection
Policy-map global_policy
class inspection_default
inspect the icmp
or alternatively
fixup protocol icmp
This will allow automatically response to ICMP echo messages pass through the firewall. I assume that they are is blocked by the firewall now since you did not previously enable ICMP Inspection.
-Jouni
-
Static NAT problem with PIX501
Hi all
We have problems with our PIX firewall. We have configured PIX 501 with static NAT for our Web server. Here's the running configuration.
6.3 (4) version PIX
interface ethernet0 car
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
pixfirewall hostname
domain ciscopix.com
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list 101 permit tcp any host x.x.x.26 eq www
access-list 101 permit tcp any host x.x.x.26 EQ field
access-list 101 permit udp any host x.x.x.26 EQ field
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP address outside x.x.x.28 255.255.255.248
IP address inside 192.168.90.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 192.168.90.0 255.255.255.0 inside
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside, outside) x.x.x.26 192.168.90.3 netmask 255.255.255.255 0 0
Access-group 101 in external interface
Route outside 0.0.0.0 0.0.0.0 x.x.x.25 1
Route inside 192.168.1.0 255.255.255.0 192.168.90.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.90.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Telnet timeout 5
SSH timeout 5
Console timeout 0
Terminal width 80
: end
the problem is the configuration, we are unable to access the web server both inside and outside the network.
All input will be greatly appreciated.
Kind regards
udimpas
activate icmp backtrace and then ping the x.x.x.26 of the internet. the output should be as below:
3363574:-out ICMP echo request: ID = 21834 seq = 1202 length = 80
3363575: ICMP echo request: external untranslating: inside: 192.168.90.3
3363576: ICMP echo-reply from the inside: 192.168.90.3 ID = 21834 seq = 1202 length = 80
3363577: response to ICMP echo -: translate inside: 192.168.90.3 out:
by doing this, you can 1. Check the nat 2. If the server responds to the internet.
do not forget to allow incoming icmp:
access-l 101 permit icmp any one
-
When muse updated it contact form with smtp authentication, must that cause of change encoding manually is a big problem for a lot of people I've read about community support for third party servers. I wish that adobe would add this feature in the Muse as soon as possible. We took muse especially if we could not do coding
Muse requires PHP sendMail to be supported. Please feel free to add to our ideas section.
Thank you
Sanjit
-
UTL_SMTP - problem with Microsoft Exchange 2010
Hello
I don't know if this has already been discussed here, but I have not found a thread about it.
We use the UTL_SMTP package in our production 10.2.0.4 database to send statistics to the Department. It works very well since we have established the Microsoft Exchange Server 2010.
The problem is that the mail comes without any content. (it has the wrong title but no content)
We have already solved another little problem:
-----
->Is the only thing that is different from the old stock exchange, you must declare the complete addresses.
For example:
UTL_SMTP.open_connection ("< servername >. (< domain > ', 25); -the address of the mail server
or
UTL_SMTP. RCPT (mail_conn, ' < recipient > @ < domain > '); -delivery address
Without an address complete (without domain for example name) only the old Exchange (2003) accepts emails. (although course at the internal mail to the domain-communication)
-----
So now the mails have arrived, but they have no content. I think there is no problem with using the UTL_SMTP package.
The new trading system is clustered and now there are two dns entries:
A tip to a cluster of two-server-aktiv-aktiv "HUB & CASE" that works as a balancer(my simplified sight, it is also called NLB[Network Load Balancing] Cluster) load and sends emails to one of the trees exchange new-db-server or send it to the old exchange server (if the old Exchange is even the owner of the beneficiary-"post office box"!).
The other dumped at the old exchange server.
The problem come just in emails with the destination to the new trading system.
This is no a general problem, because emails since some CLI tools or other programs to the new system which arrive without problem (and with content :-)).)
I hope someone has an idea.
We have the same problem when we mail to a recipient whose box is the property of the new Exchange.
So the problem will be there when we spend our 'post-boites' of the old for the new scholarship.
Thanks in advance
Published by: Donein the 06.10.2010 04:00
Published by: Donein the 06.10.2010 05:22Donein wrote:
Only the second mail have content. The only difference is the additional word wrap after the subject.
So, if I get the message in my pl/sql code to do this:
msg_text varchar2(500) := ' --push the enter button :-) This is a testmail!';
It works very well. So, at this point, my problem is solved I think but the workaround is not really smart.
You need to convey what we call a body Mime (Multipurpose Internet Mail Extensions). It comes from "+ parts +". The first part is the e-mail message header. This includes the object, the name of the reader mail that created the mail, the mail message id, since and to the fields, date and so on (which many optional).
To do a single white as between the parties. If after this part of the header, it must be a blank line. After that the next part can be written - generally the e-mail of the body itself (or one of several parts of the body of the email).
UTL_TCP.CRLF offers the line of food/empty line required for you. He sample code I posted in {message identifier: = 4593735} that should work against most / all SMTP servers (assuming that the valid addresses are provided) - it also does not attempt to send the body complete Mime parameter via a single command. Open_data(), write_data() , and close_data() calls are used instead. This ensures the best control by separating the different lines and "body parts" of the Mime message.
-
After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?
Greetings, joybelino1!
Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.
If you use Bluetooth
- Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
- On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
- Restart your iOS device.
- On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
- Update your iOS device.
- Install the updates to the firmware of your car radio.
- If you still not connect, contact Apple technical support.
Have a great day!
-
Anyone having problems with WiFi connectivity after upgrade to Sierra?
I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.
No problem with my iphone 6.
Hello AspDesigns,
I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.
Search for Wi - Fi using your Mac problems
See you soon!
-
Problems with mail after switching to macOS Sierra
Hey all
After having recently upgraded to macOS Sierra, I am unable to read my mail.
I get the following error every time I check on "Get Mail".
There may be a problem with the mail server or the network. Check the account settings "*" or try again.
The server returned the error: Mail could not connect to the server 'pop1.tribcsp.com' using SSL on the default ports. Verify that this server supports SSL and that your account settings are correct.
What does this error message mean and how can I solve this problem.
Thank you
Hi Michael,
I see your message that you get an error in the mail indicating that there is a problem with the mail server or the network. To help get this problem resolved, I suggest that you follow the steps below:
If mail refers to a problem with the mail server, or the network
Mail will say that it is impossible to connect due to a problem with the mail server or the network. For example, the message may refer to a connection that has expired, or too many simultaneous connections:
If you are connected to the Internet, but the connection has expired, your email provider might be affected by a discontinuance of service. Contact them or see their status Web page to ensure that their e-mail service is online. Examples of status pages:
- iCloud mail status
- Gmail status
- Status of Yahoo mail
- Status of the AOL mail
- Status of Outlook e-mail
If the message indicates the number of simultaneous connections, too many of your devices is check your e-mail account at the same time. Quit Mail on one or more of your other devices.
If you are still unable to send or receive e-mails
- Make sure that you have installed latest version of the Mac software updates, especially if the problem occurred immediately after the installation of a previous update.
- In OS X El Capitan or later version, you can see a status icon and the short error message in the upper right of the Mail window, under the search box. The message may indicate 'Network offline' or 'Connection failed', for example. Click the message to see more details on the issue.
- Check your connection to the Mail connection doctor. It might be able to say more on the issue.
If you cannot send or receive e-mail on your Mac.
Take care.
Maybe you are looking for
-
Satellite A200-196 - create a CD factory restore settings
Hello Just bought a used computer (Equium A200-196) and want to restore it back to factory settings. Am a little nervous to do it without the restore disks. * Is it possible to get a restore CD from the restore settings already on the computer *, jus
-
Hello HP has a permanent solution to audio pests / problem caused by the last program of HP Power Assistance.exe? It is becoming boring and tiring that I have to keep uninstalling the last (HPA) driver and reinstall the old driver HPA to fix sounds j
-
How to restore files deleted from usb?
I deleted the file from usb by accident. How can I restore them?
-
What device is required for SSH 1
What is the minimum functionality required to support SSH 1 (both client and server) on a router and switch? IPSec and THE required or will be IP Plus and the work of the EMI?
-
Adobe InCopy CS6 (windows, Deutsch) - where to download
I can't find a place to buy, download Adobe InCopy (Windows, Deutsch) CS6. I bought this a few months ago, but cannot get information on how to do it again.