problem with start after updates

MY computer is in a continuous loop.  It closes down to install windows updates and now it opens with the configuration of updates and gives thanks to the step 1 and 2 and then stops.  I tried to press F8 when it restarts and then try to start in safe mode with command prompt so that I can put in order to make a system restore, but it never gives me the opportunity to type in the command.  Instead, he goes to the window to the Startup Repair, looking for repairs and restarts on its own and I'm back to square one.

You should be tapping F8, pressing her to get into safe mode.

If you can't get into safe mode, you need to try this way to fix your computer:

As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

If yours falls into the category above, download the ISO on the link provided and make a bootdisk of it.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

You can make a tool to restart system, System Restore, etc. with it.

Read all the info on the website on how to create and use it.

ISO Burner:

It's a very good Vista repair disc.

You can do a system restart tool, system, etc it restore.

There is not a disk of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

    seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

    The 'list' of relevant articles that I know, they are now

    -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

    If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

    Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

    Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

    GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

    If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

    9.3 iOS update issues

    Leave a post by: ChitlinsCC

  • Problem with Safari, after update

    I use a MacBook Pro, OS X Yosemite, 10.10.5 - and after the last update, I have problems with Safari (version 9.1). Some Web pages I visit every day is more responsible (I get the message that the page needs to be recharged because she failed the first time, but this does not work then either). This problem started just after the last update. Does anyone else have this problem? What I have to go back to the previous version or can I fix this problem?

    If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

    Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

    Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

    Open Safari - Preferences - Privacy - data to remove any Web site.

    Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

    Also, try the following steps:

    Restart your Mac.

    Try to start:

    -Stop your Mac

    -Wait until your computer turns off and after that press the power button

    -Just after you hear the startup tone, press in and hold the SHIFT key

    -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

    -Once your Mac boot, restart dhcpd as you usually do.

    If this does not help, follow the instructions below:

    -Stop your Mac

    -Wait until your computer turns off and after that press the power button

    -Just after you hear the startup tone, press in and hold the SHIFT key

    -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

    -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

    -Click on the disc to check, then, if requested to solve the problems on the repair disk

    -After that click on verify disk permissions, and then click Repair disk permissions

    -Once the process is complete, stop your Mac and turn it on again after 30 seconds

    I hope this helps!

  • Windows7 + linux mint double PC operated facing problem with windows after updating windows 7 to windows 10

    I was running the two operating system on my PC windows 7 and linux Mint. However, after update from windows 7 to windows 10 my PC can not be operated with windows. Rather when I select windows as my operating system at the start of my PC, it shows that the operating system is missing. But still I can run my PC Linus Mint. Now what should I do to recover my windows?


    Thanks for posting your query on the Microsoft Community.

    According to the description, I understand that you can not use Windows 10 after upgrade to Windows 7.

    It may be possible that the upgrade to Windows 10 gets no success.

    I suggest you to read the thread by Andre Da Costa MVP community moderator replied on 15 June 2015 on the same question and check if that helps.

    Note: Using the third-party links, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that any problems resulting from the use of third party

    Part links can be resolved. By using the links to third party is at your own risk.

    You can also check:

    Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

  • Problems with scrolling after update

    IM currently using the BlueJ ide and after updating to the new system / update (macOS Sierra) there is significant lag / jitter when scrolling. This problem only occurs when you use the scrolling with two fingers with the touch pad. When I use a mouse / or click the scroll bar on the side, it seems to go well. Not sure if there is a problem with BlueJ or the new OS. Would be very interested for some suggestions on how to fix this very annoying problem. (Using a Macbook pro 13, 2015).

    Thanks a lot to all the answers

    The obvious question would be if you see the problem of scrolling in Mac OS standard applications such as Mail, Notes and Safari.

    If this isn't the case, it is likely BlueJ.

  • HP laptop - 15-r150nm: problem with wifi after update realtek adapter

    Hello! I've updated some drivers of HP customer service and then restarted computer. When it is on I couldn't use wifi. When I select the problems, it says: 1) "" Realtek 802.11B/G/N WIFI adapter RTL8723BE has some problems to the program control or hardware. "" (it is Croatian, so I tried to translate it for you)

    (2) "a network cable is not plugged in correctly or may be broken.

    What should I do, I have only this laptop and internet wifi, write this work? Thank you!

    Hi @frane53nja,

    Welcome to the HP Forums!

    This is a wonderful place to find answers and advice!

    You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

    Learn how to post and more

    I understand that your laptop works OK and after updating drivers on reboot HP customer service, you have lost your wireless network. When you run the Windows troubleshooting tool, you received a message that there was a problem with the NIC due to recent hardware or software changes.

    Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

    Before you perform a restore, as shown in the above troubleshooting steps, you can try this option.

    Go to the nursery of the device

    Click the network tab to expand the list.

    Right-click on the wireless network adapter and select roll back driver.

    Repeat this process for all types of adapters listed.

    While on this screen please check this definition also.

    Right click on the wireless adapter and choose Properties.

    Click the power management tab.  If "allow the computer to turn off this device to save power" is checked, please remove and click OK. Repeat this operation for all types of adapters listed.

    Please let me know the results.

    Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

    To show recognition for my efforts please click the Thumbs Up below.

  • problems with ftp after update of windows 7 and windows xp

    After updates windows 7 and windows xp (updated April 10, 2014) my computers give different errors with FTP, Explorer Windows and FileZilla transfer.
    In windows 7 is resolved by uninstalling the updates. In Xp, no.
    Any idea?

    See the thread below for a possible solution:

  • Problem with starting after trying to install XP.

    I have a Samsung NF110 netbook with an external cd drive. The hard drive has two partitions - c: and d:. C: installed Windows 7 and d: was empty. I wanted a machine to dual-boot with Windows 7 and XP in different partitions. I tried to install XP on the d: partition but during installation only choice was installed on the c: partition (replace Windows 7). I decided to do it and then I hope to install Windows 7 on the d: partition later. The installation process copied all files XP from the CD, but when it came to restart it has always tried to boot from the cd and start the implementation process. I tried to remove the cd drive, and then it came with NT invalid Boot.ini detect failed. I tried various suggestions found on forums to fix this. The most popular seems to be to get to the Recovery Console, and then type bootcfg/list and bootcfg /rebuild. When I do bootcfg/list it shows a Microsoft Windows XP Home Edition installed. However after the rest of the instructions for example enter the loading and do/fastdetect identifier does not solve the problem. Someone at - it any other suggestions to correct what I guess is an MBR corrupted. Wouldn't be better to just format the entire hard drive and start from scratch?

    Thanks in advance for any help offered.

    You must install the oldest OS first, so XP first then win 7. XP doesn't know how to run win 7, so if you install after win 7, you will lose the ability to boot under win 7. A repair of Windows 7 installation can fix.

    install xp and when you do, be sure to create 2 partitions, one for xp and one for win 7

  • Problems with videodriver after update BIOS on my SP4600

    I did a bios update and installed win 2000 on my satellite pro 4600...
    He was working before the bios update, also with win 2000.
    When I installed the video driver, my laptop didn't work anymore. With safe mode I ve uninstalled the video driver, and the system worked again, but only with 16 colors.
    Is there someone who has recognized this and has a solution for this problem?
    Help please, if possible in Dutch!

    (Sorry for the bad English)

    Kind regards


    Hello, Arthur

    It's very strange question. It's really not known drivers me the BIOS update can do some influence on some installed.

    Have you tried to install the Toshiba established the Toshiba download page driver version?

  • problems with wifi after update? anyone?

    I use A953, just updated to build mils2_u6_4.1 - 22, the system version is: 64.1.22.S953. Retail.en.DE

    So far, I like the update, looks cool, like the animation of the screen-go-to-sleep

    But, my WiFi is not working properly, there are just a couple of the available networks and mine is excluded...

    Has anyone of another expirience of something similar?


    Thanks in advance,


    What I read somewhere else (may be exceeded), is some wifi router to use an automatic selection of chanel. By some users when the chanel 13 is used there is a problem. When they choose the beach (..-12) the problem disappeared. This problem seems to occur with some AVM fritzbox

  • Satellite P300D - problem with reboot after update the HARD drive


    I have laptop Satellite P300D - 12 c and recently, I put a new hard drive, the Seagate momentus 7200 RPM 2.5 "500 GB. It works well, but I have a strange problem; normally when I reboot the laptop when it will close something sounds, in the figurative sense I could say "something moves" for a bit in the DVD - ROM drive and shuts down and then restarts.

    Now, when the reboot happens to the part of the dvd - rom drive, I described above it stucks there... "something is happening" on the dvd - rom drive as trying to permanently access a dvd or something and he does the same thing until I force it to shut down by pressing the appropriate button. It happens once in two attempts to restart.

    Does anyone have a solution or a tip or something? If you do not understand something to tell me,

    Thank you very much


    I agree with Akuma. Maybe the drive is loose and so you should try re-allocation of places there.
    Maybe it works

    And updated the BIOS, you can find the Toshiba site: > support & downloads > download drivers

    Good luck and give us feedback! :)

  • Problem with scrollbar after update with App Builder 32.4.4.


    I just created an app update with the new version of the DPS App Builder (32.4.4.). After the update the scroll bar (of the Viewer - no content drop-down) moved to it of original position. (see screenshot)

    Any ideas?


    The update went live Saturday. If you do not have automatic updates enabled for your devices, then you should see the update in the App Store Update tab.

  • Problems with bookmarks after update to version 16

    My Favorites used to appear in the drop down bookmark, but are now available in the bookmark sidebar. I tried the reset to the default option. I tried to delete the places.sqlite file and the file localstore.rdf profile, but no change. I also try to delete the places.sqlite - shm and places.sqlite - wal?

    How can I get my favorites back to where they were?

    In addition, I can't export bookmarks as html - past by the movements, but no file is created.

    My problems seem to have disappeared since version 16 uninstall and reinstalling version 15.0.1, help-> comments telling me now it is up to date!

    I suppose that v 16 is not ready for prime time hours.

  • After the last updates of windows have problems with start up and now drivers


    After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

    May 14, last night I had several (automatically) downloaded windows update

    Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

    Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

    Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

    Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

    Thank you

    Hi Jane,

    You have a disk to install Windows 7 with you?

    I suggest you to check the event viewer for error details report.

    Open event viewer.

  • Problems with Windows VISTA update (error code: 9 c 47 of the 800070002, D 80024200)

    original title: problems with Windows VISTA update

    I'm using Windows Vista (SP2). Windows update is not able to update the following updates on my system. Whenever I get these error messages.

    1. 9 47 code
    2. Code 800070002
    3. Code D 80024200.

    Is there a resolution to do the same thing?


    Did you change your computer?

    I suggest you to follow the methods and check.

    Method 1:

    Problems with installing updates

    Method 2:

    If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.

    Method 3:

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

Maybe you are looking for