Problem with 'systimestamp' and the CSV file

Similar Questions

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Want to Phoenix 860-010: problem with fonts and the noisy fan

  I have a new machine, just a day old, and I'm having a problem with fonts.  The file Explorer, Edge and other similar programs seem to go from a very readable font that lights up in half a second or less whenever I move down on the page in these applications.  Police that results is much more difficult for me to read because of the lightness that results. I have not met this problem before.  Frankly, I don't know the source of the problem.  Is it hardware (video card) or (Windows 10) operating system software?

  Hello @PhotoGene47,

  Thanks for the quick response!

  Have you tried to see the document that I mentioned in my previous post?  If you prefer to have the Board repaired, you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Old problem with Spotlight and Word .docx files

  There is an old problem with Spotlight not finding the Word .docx files.  You can find old discussions about it since 2008.  But despite this problem being old has never been resolved.

  The essence of the issue is that Spotlight relies on a variety of software modules for the index files.  Projector selects the module suitable for each type of different file of the index.  These indexing modules all have the suffix of file .mdimporter.  Name of the module for indexing Microsoft office files is "Microsoft Office.mdimporter" and it can be found with a few other modules of .mdimporter in/library/Spotlight /.  The "Microsoft Office.mdimporter" module has rights author of Microsoft inside its packaging info so we know who wrote it.  But this module is included with all new Macs from Apple.  This is perhaps why this problem has never been corrected - the software is written by Microsoft, but delivered by Apple.

  The symptoms of the problem are that Spotlight will find no content in some .docx files.  It is unclear why it fails on some .docx files, but not others.  This problem does not affect other Microsoft formats such as .doc, .xls, .xlsx, etc..

  Because Apple wants to sell Macs to business, and companies make heavy use of MS Office in general, we could think that it would be a priority to fix.  But given that this problem is 7 years old and still not resolved I do not.

  Any suggestions on possible alternatives would be welcome.

  After further investigation, I discovered that the problem is not with "Microsoft Office.mdimporter" as I had thought.  If we run the mdimport(1)-d1 you can see what importer is used. It turns out that for the .docx files, the importer is called 'RichText.mdimporter' which has a copyright by Apple.  And if you use mdimport(1), the file will then be found by Spotlight.  If the issue is not the importer, but rather everything that is triggering the importer to run the .docx files updated.  Here's to blame Microsoft for this one...

  As a workaround, I force indexing my files .docx with a Bash script, which is started by cron.  The script indexes all the .docx that have been modified in the last 24 hours and runs every hour via cron.  If someone is interested in the details just post here and I'll include the script in another post.

• Problem with writing in the new file every day, error #1

  Hi, I have build a vi that writes data measured for each second of the file. This vi will be used for the acquisition of long-term data and I want to write the data to a separate file every day, else the file becomes

  very large. The vi is supposed to work like this, first set the folder to save it and then start logging with the "datalogon" button, first write the column names in the file and after that write data

  every second. If the date is the same newspaper, data, if the date is not the same write the new file name, write the column headers and write the data again every second. The date is used as the file name.

  This work is quite good only at the beginning of the vi I get the message "error 1 occurred open/create/replace the file writable spreadsheet String.vi-> write to the spreadsheet (string) .vi-> NHR file -

  SerialDaq - 03 APR 2013 .vi. I did some tests and it seems that in the first or the second round of the loop, the path in the annex is ' file name:------"and not drive:- and this seems to be caused by the fact

  that I first write the column headers, and then the data (if I write only the data of the problem does not occur).

  So I (think) for what is now the problems but don't don't know how solve it, I would appreciate it if someone could help me with this.

  Regards, Martin

  I made the change you mentioned and to my surprise I got the error message and also, with the vi you sent, I took look at it and found that:

  -If I first enter the "folder to save the file', then run the vi and then press on the" data connect "I don't get the error.

  -If I first run the vi, then enter the folder ' save file to "and the hit" the data log on ' I get the error.

  I also tried with the vi original (without the connection shiftregister in the case of false and init for removal) and which gives the same result as above. If I get the

  error message and choose stop the vi, start the vi again once I don't get the error because the folder in which the file is entered. This issue appears only when there is no file «»

  to save the file "in the dialog box.

  While I'm writing this I realize that "folder to save the file" is outside the while loop so only executed at the start of the vi is maybe I have to put it inside the while loop? A tried

  This and at first, it seems that the problem is solved, I don't get the error message on my screen, but it still appears on the error handler in another part of the vi (visa series).

  Oh, Yes. The 'name of the resource visa' and 'file to save the file' are both outside a while loop and are only read at the start of the vi, at the moment they have not a valid

  the error value is generated.

  Problem solved, thank you for your comments!

  Regards, Martin

• Problem with LED and the comparison.

  Hi everyone, I have trouble with this application, so I hope that someone could give me some advice. Im going to explain as best I can...

  So in this VI, I have 4 signals that I need to compare them, I need the smallest and largest value, so I used a restructuring of business to do. I do 2 groups to be compared, and then the result of each one of them receives another comparison to get the values that I want. My problem is, for the largest value of all the 4, I need an LED to indicate what is most great, and something I have is in my attachment. I take my first group two and put 2 LEDs, so when the comparison occurs, you turn and the other goes OUT, (which indicates that one is the largest and the other is the smallest), and again the same thing in the other. But as you can see, when running I have two LEDs indicating, in every comparison, which is great, but I need a LED lights up when this value is present. and the other three offshore. I know that work in this way, the result I m going to get, but I can understand how to continue with the result of this step, I need.

  As far as I know, there is no way to compare more than 2 signals at the same time, so I tried to merge the signals, but this didn t help me at all (maybe is something that I do not understand how to merge works, so if anyone has an example on how to do things, i´ll check).

  All data are dynamic, a NI 9237, but since its a laboratory, I can't get a lot of time trying different solutions, so I did a test TDMS file and change the DAQ Assistant for a reading of file of the measure, but the rest is the same.

  Use 'antenna bundle' to build a picture of your values of 4 controls. Return the index of the max and min elements, use 'table max and min. From there on, it should be a wink to indicate the corresponding settings.

• View the problem with PDFs and the pen

  Hello

  I have a new Pro and that you have not installed an important apps or new software.  I can use the stylus to write on a PDF using PDF viewing software provided, and that works a treat.
  I can even e-mail the PDF file with the ratings on which can be seen by the recipient too.  Great stuff, really very useful.
  BUT if I then open the PDF saved again on the surface, I get a load of rubbish where writing should be.  Random blocks of graphics.
  I restarted the surface and closed the PDF and opened it again, with the same result.
  I had downloaded the PDf noted to a Web site also, so I deleted the cache using disk cleanup, and who did not make a difference
  I have the PDF file and a screenshot of what I see on the surface, which I can download also.  But the PDF has confidential information, so I need be sure, that it would not be played on a public forum.
  The list of topics below is not really a relevant drop-down be...
  Thank you
  Dave

  A recent MS update hassolved the problem that I see...

  
  Dave

• Problem with sound in the ProRes files on first last, CC on 10 to win

  Hello, I've updated my CC Pro first to the latest version on my Windows 10 PC. Since then, I have a problem with the sound in ProRes files recorded with recorder Odyssey 7 q. My first reads the file and it detects sound only partially (in each file it our times of 2-3 seconds of silence, followed by its normal).

  It happens only on my first on Windows. On my MacBook with the same version of first, everything works fine. Apart from the first, I play Prores files successfully on my windows (with sound).

  You know all the solutions to this problem? I tried to reinstall codec first and Quicktime on my PC. Thanks in advance for the help.

  Convergent Design and Adobe are aware of the problem and working on a fix.  You need to roll back to 2015.3 for the moment.

• Problems with downloading and errors about files out of sync

  Since the 2015 upgrade I was not able to upload my web pages unless there is a major problem. The downloaded pages have their layouts all screwed up and the usual nuisances of en error: ' some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please communiquer communicate with the author of the Web site, "keeps appearing. Is there a known problem for developers Adobe Muse regarding this upgrade. I tried with 'All files' downloading so "only changed files" settings and I am using the option 'transfer to the FTP host. The site is at www.odditist.com.

  Thank you.

  There is no false positive known for this warning.

  More information on the caveat is available here "some files on the server may be missing or incorrect" Warning Message>.

  I'm not encounter the error when the display of your site. It appears only for a particular page?

• ESXi5 - problems with NFS and the data copy store

  Hello world

  I recently moved into a solution fully virtualized for my network, 3 x 5 ESXi servers running on our GigE network.

  First of all, I use all free software from VMware, so vCentre etc is out of the question.

  I have major problems when you try to copy files between:

  • NAS (NFS) to ESXi 5 host
  • ESXi host to the NAS (NFS) 5
  • And using VMware converter between ESXi 5 hosts converter Standalone

  The problem is that whenever I'm transfer between hosts I am struck with the horrible network performance. Even if I use GigE adapters and switches between my hosts I will receive no more than 12 Mbps speed of transfer real (100 Mbit/s connect?).

  On the flipside, if I use virtual guests on the same exact host I can happily transfer data between my NAS (NFS) servers with speeds between 60-150MBps ~ (1000 Mbps).

  Examples:

  Speed of 10 Mbps of transfer of ESXi_1 copy OF NFS data store share ~

  Server2008 (comments, located on ESXi_1) copy OF NFS 75MBps transfer rate ~.

  Server2011 SBS (comments, located on ESXi_2) copy OF Windows share 2008 (ESXi_1) transfer speed 120MBps. ~

  ESXi_2 copy OF NFS data store share transfer rate 5MBps ~.

  Attached (wtf.png) example:

  I copy a file that is located on our NFS share first, it's a 3 GB file to the copy within guest OS (2008), it is indicated in blue - top speed of 80MBps

  I copy the same exact NFS share for the host (datastore1), this is indicated in red - top speed of 7.5Mbps

  The third transfer/s (green) is between the customers of windows on different hosts, transfer a 6 GB file as well as a copy of the 360 MB file - transfers two happily send to GigE speeds with a peak around 40MBps

  I can reflect these results across the three servers without modification. Copies between you will be able to run well enough (not exactly 100% use of GigE) but at the moment where I try to do something to the data store it will just choke at all about a 100 Mbps connection speed.

  The final image (wot.png) confuses me beyond belief. I would try to explain what is happening here:

  • This image shows two times the same exact file transfers, except even machine PHYSICS
  • The first (red) transfer between the ESXi_2 host server and the NFS share using the browser data store and direct download - its top speed is around 8MBps
  • The second (green) transfer between a guest server 2008 running on ESXi_2, download the same file exactly at the exact location using vSphere Client. I mean the same EXACT file; It connects to the NFS drive by the data store ESXi_2 (NFS share).

  Why on earth can my comments directly download a file on a data store connected to NFS GigE clocked and yet the same exact host cannot go anywhere near corresponding to these speeds?

  As indicated in the title, the problem seems to happen whenever I use ESXi datastore browser on the host computer using vSphere Client or between browser datastore ESXi to/from an NFS share.

  No one knows what might happen?

  Is there some sort of restriction on the transfer of files between a host and shared NFS ESXi 5? Whence this bottleneck?

  Thanks in advance for all the help/ideas that guys can throw my way.

  P.S. Sorry for the wall of text, I really wanted to give as much information. as possible.

  What type of storage you have locally on the host computer?

  I have seen this problem with write-through controllers: http://wahlnetwork.com/2011/07/20/solving-slow-write-speeds-when-using-local-storage-on-a-vsphere-host/

• Problem with rendering and the display of a component Declarativ

  Hi all
  
  I'm doing the tutorial from this link http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_40/jdtut_11r2_40.html
  Like here, I make my component, first deploy and import and everything works fine, then I delete all references to this component, and then I change my component with a few new employees as a description of some field and etc, but I have nothing to do with the functionality of this component. After that, I deployed this component and do the same thing as first import of the component. Now when I drag and drop component that I see only tags <>name of the component, I can spend parametars component and when I run the project I see, but in developer mode, I see tags and name. : S also, import method component cant do as in tutorial, now I have to go to another property of the project and import the jar file.
  
  May be the problem: I'm doing my own skin his spans fusionFx-v2, I use for component declarative juice fusionFx-v2, declarative elements I have icons and as parametars 6 methods reciving javax.faces.event.ActionEvent I
  
  One had same problem with declarativ components?
  
  Thank you for your time!

  Hello

  -Make sure that you have deployed the component as a library ADF
  -to reinstall the component uninstall first (select library in the resources catalog and select the remove from project option)
  -Add the new component
  -You may need to restart the IDE for the file in some earlier versions of JDeveloper JAR must be replaced by the new

  You do not give a Jeveloper version with your question, so that's all I can say for you.

  Frank

• Problems with playback and the recording of the sessions

  Hi, covered!

  I met two annoying problems:

  (1) for some unknown reason, reading in new sessions is limited to-3db. So when I start a new session 16/41000 and import an mp3 commercial track just to check its spectrum or the tone, it's only hit - 3d on a meter, but it should be as 0db and cutting. Follow-up volume = 0, master volume = 0. I've never seen before, it happened to my Audition for a week or two, and I'm pretty shure I wouldn't change a thing.

  (2) for the recording of the huge sessions with titles of 35-45 or more, sometimes it suggests to save without modifying the audio files, too (so I find myself with fresh, fresh generals (2), (3), (4), etc.) It's the most annoying thing, baaargh!

  All of the pieces of advice?

  Potapka wrote:

  (1) for some unknown reason, reading in new sessions is limited to-3db. So when I start a new session 16/41000 and import an mp3 commercial track just to check its spectrum or the tone, it's only hit - 3d on a meter, but it should be as 0db and cutting. Follow-up volume = 0, master volume = 0. I've never seen before, it happened to my Audition for a week or two, and I'm pretty shure I wouldn't change a thing.

  Hmm... go to Preferences > multitrack and reset the stereo panning mode to l/r cut logarithmic and no - 3dB Center. This will not happen then.

  (2) for the recording of the huge sessions with titles of 35-45 or more, sometimes it suggests to save without modifying the audio files, too (so I find myself with fresh, fresh generals (2), (3), (4), etc.) It's the most annoying thing, baaargh!

  Yes, it's boring. If you are absolutely sure that they are not modified, then remove additional ones. You can take a look at Mediasweeper too.

  Hi, covered!

  All of the pieces of advice?

  Please use English spelling normal - this way, I don't feel as if I want to run...

• Problems with CAP and multiple cod files

  Hello!

  I had a MIDlet that I'm trying to convert a cod file using the compiler CAP. The original jar file is 169 KB, maybe too big file a Cod. I use the following command:

  Import the "C:\Program Files (x 86) \Research 4.6.0\bin\rapc" = "C:\Program Files (x 86) \Research 4.6.0\lib\net_rim_api.jar" codename = xxx-midlet jad = yyy.jad yyy.jar

  The CAP program seems to work ok and produces the following 5 files:

  xxx.jar 18 kb, contains images, manifest etc.

  xxx. COD 147 KB

  xxx. CSO 1 KB

  xxx. Debug 127 KB

  XXX - 69 KB 1.debug

  Also, it changes my JAD file and adds the following:

  RIM-COD-Module-dependencies: net_rim_cldc
  RIM-COD-URL-1: xxx - 1.cod
  RIM-COD-SHA1-1: 52 83 e9 c7 6th a1 ad a6 5f bc 8 b 9 b 07 b1 04 53 49 ca 46 fd
  RIM-COD-size-1: 59208
  RIM-COD-Module-Name: xxx
  RIM-COD-size: 90108
  RIM-COD-creation-Time: 1231858243
  RIM-COD-URL: xxx.cod
  RIM-COD-SHA1: 2d 2 b 72 c5 a3 68 03 ed be 22 fa df 41 05 c0 0e 48 8 a 77 ec

  But it does not create a file xxx - 1.cod, or at least I can't. Of course it takes a... Looks like the xxx.cod file is too big also. This installation live does not work. Y at - it an option to indicate the CAP should create several files of cod? I cannot find a reference on CAP documentation, is there another way to create a cod to jad/jar file (s)?

  Erik

  Seems that CAP created a file of large cod with brothers and sisters inside.

  Rename the file zip cod.

  Unzip it. Remove this zip file.

  You have now all the cod files.

• Problems with fonts and the Fontcache.

  Recently, I noticed that a Svchost was running constantly at high CPU usage, as well as a few programs had stopped working on my PC. After doing some poking around, I believe the problem to be with Fontcache and my fonts. It turns out that my partner has installed a large number of fonts, which I suspect to be corrupted. Unfortunately, I can't open the fonts folder, or the section fonts in Control Panel.

  In an attempt to put an end to the use of the processor (which I think is of Fontcache constantly trying to start upward - and otherwise), I have disabled loading in services, however it still loads up when I try to start a program like InDesign. InDesign will also not load, I suspect that for the same reason.
  I could not remove all the fonts, or find no way to remove them, without access to the section fonts in Control Panel. I tried to access via a command prompt and just can't take the ownershop/control of them to remove them. All of the guides I found on the internet forced me to open the folder of fonts/Control Panel and manually change the permissions using the Windows user interface, but obviously I can't do that.
  Does anyone have a solution to remove fonts or an another workaround for the problem?
  Thank you
  ~ Fishy

  Hey shady,

  Thank you for reaching out to the Microsoft Community.

  According to the description, it seems that you are unable to remove the control panel fonts.

  To guide you in the right direction, I need a little more information of the computer with the problem. Please help me answer the following questions:

  1. what happens when you try to access the control panel?

  2. do you get any error code or error message?

  I will certainly help you with this issue.   Here are some methods that you can try in order to solve the problem.

  Method 1:

  I suggest you run the troubleshooter of performance on the system and verify.

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 2: Remove the fonts in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  For more information on fonts, check out the links.

  Install or remove fonts
  http://Windows.Microsoft.com/en-us/Windows7/install-or-delete-fonts

  Fonts: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/fonts-frequently-asked-questions

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. It is our pleasure to be of service.

• Problem with FWSM and the same L3 interface switch

  I have two 6513 s with a 802. 1 q trunk linking them. Each switch is redundant Sup720s running in native mode, worm IOS 12.2 (18) SXF (that they were running out of SXD3). A FWSM (ver 2.3 (3), routed mode, unique context) is in each switch, Setup in failover mode.

  I can't get a PC in a virtual LAN that has the defined layer 3 interface on the switch with the active FWSM in this document, to communicate with the devices 'behind' the FWSM. If I move the configuration of layer 3 to this vlan to the other 6513, everything works fine.

  The MSFCs are inside the firewall, they have a configured layer 3 interface in the same vlan as the FWSM 'inside' interface. Several "same security level" interfaces are defined on the FWSM and used to protect the farms. I use OSPF on the MSFCs and FWSM and the routing table is correct.

  The FWSM generates connections to the attempts made by the PC with interface layer 3 defined on the same switch as the active FWSM very well, so this isn't a problem with FWSM ACL.

  A ping of the FWSM "inside" interface from a PC with the defined layer 3 interface on the same switch as the active FWSM fails, although debug icmp trace on the FWSM demand and response shows. A the packet capture, using the NAM-2, only shows the request packets. I captured on the vlan common and FWSM port channel interface bottom of basket.

  Just to add to the confusion, if I capture in the same places, but do the ping of a PC which is in a VLAN with the interface of layer 3 defined in the 6513 which does not contain the active FWSM, that works very well, I see the request and response on the capture of vlan common, but only on demand on the capture of the port channel.

  This problem has been there since the beginning of this implementation and has not changed with IOS and FWSM software upgrades. I had this experience with all the VLANS that I tried to define the interface of layer 3 to on the switch with the active FWSM. I turned on MLS.

  If anyone has experienced this and solved, or knows what is happening, I would be grateful for any ideas.

  Thank you.

  Keith

  Keith, are you running etherchannel distributed on of your 6513?