Problem with the application after the installation of the .bar file

Similar Questions

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• Problem with the executable files

  Hello all, I need a help from you...

  I use LV 2009 SP1 Professional Development Suite on Windows Seven and I have a problem with the executable files, a problem that I have ever found with other versions of LV (8.x, for example) and I'm a little surprised...

  In the attachment you will find an example of what I mean.

  There are two base screws, the main one (prova) and a Subvi (provasubvi). The main vi launches the Subvi and the Subvi simply create a chart. As you can see on the screws works fine, without any kind of problem.

  I also created the exe file, without specifying that no particular option... and 'magic' of the application does not work as I want. In particular, it seems that the Subvi is running, but the front panel will not be accessible.

  I also try to play with the Subvi construction structure and options, but nothing change.

  Did you ever solve something like that?... I would say that I thank you in advance for any suggestion...

  Andrea

  Hello andrea,.

  Looking at your project I've heard that you do not include the Subvi during the build of the project. SO I slightly modified. Please find the attachments.

  Thank you and best regards,

  srikrishnaNF

• Problems with the audit files!

  Hi friends,
  
  We are facing a problem with the audit files we have a runnning on oracle 10g server and being an Institute of teaching many ppl to connect to the server and too much work with SQL and PL/SQL. We have disabled the option to audit the database, but the audit files grow enormous in size. May I know what can be the problem and how to fix that there could be something that we would have missed.
  
  Kind regards
  Maury

  There is no setting of "verification". Display the values of

  AUDIT_FILE_DEST, AUDIT_SYS_OPERATIONS, AUDIT_TRAIL.

  I don't know 'NULL' as the value for each of these parameters.

  Werner

• Problem with the downloaded file (Installer cloud creative)

  I reset my computer and upgraded to Mac OSX 10.11.4. I downloaded Creative Cloud Desktop install but in the middle of the stage 'Download', I get an error 205 "it seems to be a problem with the files downloaded.". I checked the firewall and connectivity issues and everything is ok. This is just like the installer is corrupted.

  Clear Tmp folder.

  Make sure the option "use FTP mode passive mode" is unchecked in the proxies tab.

  If you are using a wireless or Wifi Internet connection, try wired Ethernet connection.

  Always the same? or who already use the wired connection.  Try live delayed creative cloud Installer.

  N ° 1)

  Click on below link and download page of 6 CS open, do not download anything from there, just keep it open.

  Download Adobe Creative Suite 6 applications

  Step 2)

  Click on the link below and download file CC to install offline DMG and use them to install the desktop CC app and check.

  http://trials2.Adobe.com/AdobeProducts/KCCC/1/OSX10/ACCCx3_6_0_248.dmg

• photos of the iPhone are on the side and I can not turn because theres a problem with the property file

  Photos imported from my iphone came on the side and when I turn and try to save, it won't let me save it like that saying "windows Photo Viewer cannot save changes to this picture because there is a problem with the pictures of file properties". What should I do?

  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• After having migrated to HPConnected Central ePrint problems with the print files sent to the email

  HP has done once again huge confusion with the replacement of her service "eprint" to "HP connected". There is a reasonable need to do? In any case, after the migration, I noticed several problems:

  1 PDF document, less than 5 MB, sent to the e-mail address of the printer is not printed. I noticed with a type of a PDF file that I receive from my Bank. Other PDF files are printed, sent by e-mail also. Any reference to what should be the reason of not print these PDF files?

  I want to point out that the these PDF files, I'm referring to not print is printed with success if I print them since my network where the printer and not printed via eprint option in sending the file to the email address of the printer. When using old HP ePrint service, I was able to print PDF files sent by e-mail.

  I get "system error, try again"! for the file itself and email body is printed correctly.

  

  2. in the use of HP eprint service, I used to receive the confirmation email after sending files by e-mail for printing. Now, this is not possible. Read about it on the forum I learned that this option is not available any more, after the migration to "HP connected". In this topic was given the opportunity to connect to connected HP and see if the file is printed or not. If HP has ruined their functionality for lets say more easy way to know if my files are printed or not. If I'm in a hurry and I send and send any phone to my printer, I will not receive any confirmation e-mail (with easy and speed) but I need to plug on HP connect... blah blah blah.

  That is why I ask if there is possibility of RETURN migration to eprint, old and not fancy but functional HP ePrint service?

  Used printer:

  HP p1102w CE658A, with the latest firmware, with operating system on Windows 7 computers (64)

  and always gon no response on email sent to support.

  Its easy to find!

  Product HP take or leave as it is.

  I leave!

• Problem with the executable files, nothing works anymore.

  Hi, my name is Richard and I have a problem with my computer.

  None of my executables work more, they all stop responding when I open them up (if they even offer) This includes but is not limited to, my anti-virus and malware... Makes to solve this rather difficult.

  Note: Very important: when my computer starts, (he did not before) it now opens a tab of Google Chrome instantly with the url:

  http://gangnamgame.NET/

  With Korean words... It is clearly a malware problem, I think, but I can't fix it. And she is taken care of my computer because I can't open any program apart from the basics like wordpad and my browser.

  Please, I need help. I'm under W7U.

  I've tried https://support.microsoft.com/nl-nl/kb/950505, but when I tried to enter "REG IMPORT Exe.reg" nothing happened, just a black for 0.01 seconds and then screen nothing after that.

  Do not restore points having adapted makes things much more difficult. I suggest you try this approach. You need to do it quickly because Windows can replace the backup copy of the files of the register at any time.

  You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some typing prudent . Ask a computer-savvy friend to help you if you lack experience in this field. You may reset your password to an earlier value.
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3 log in as administrator if you are prompted.
  4. Select repair when prompted.
  5. Select the command line in the menu.
  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  dir
  8. review the dates of the software, system, and SAM files. The files created before or after that is your problem?
  9. If they were made before the problem appeared, you can then type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• problem with the htm file firsefox document, becomes it removed and deleted

  I have a white screen which displays the file as 'file:///C:/Users/Mark/AppData/Local/Temp/Magentic/Mag3075.htm', is unable to get rid of it, can someone give me a simple step by step direction to remove it and get out of my computer, the magnetic program has been removed, but still have files, this isn't one of them.

  First make sure you can see hidden files/folders by going to start / Control Panel / folder Options / view and check the box show hidden and system files.  While there, also uncheck to hide extensions of known file types (this will be useful to you later).

  Go to http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and get Autoruns and run it to check your startup items.  Search for this file.  If you find it, delete it or uncheck the box allowing it to boot at startup.  Will not get rid of the file itself, but it must stop the logon dialog box (a step in the right direction).  Restart after you did it to see if it still appears.  If so, return here after having tried other options that follow.

  Now open Windows Explorer and go to that location and select the file and click on delete.  I guess you have tried this and it didn't work.  It gives you an error message when you try?  What is the EXACT text of this error (including all codes)?

  Try to use one of the following free products to remove the file/folder.  Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml or file Assassin http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/). These programs often work when normal functions remove Vista not work correctly.

  If you are unable to file (getting an "Access denied" error while trying to to navigate on this one), you will need to change the permissions for folders and files to give you the permissions of all rights, even appropriating. You may need to go to advanced to check special permissions to see if there is any restrictions there including inherited properties of parent folders). Here are some instructions on how to do

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Once you have the appropriate permissions and ownership if necessary, you should be able to delete the file normally or with one provided above both programs.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problems with the .exe file programs + System Restore does not respond when you click

  I have Windows Vista. This problem started a week ago. I tried at first to use my "ccleraner" already installed, but this program does not open when you click on it. I was asked to choose the program that the application to use to open it. This has also happened when clicking on itunes. My avast program when you click also asked which application is required to open it. When it finally scanned my system it does no propblems. In addition, I tried to turn on windows defendrer as he told me that it was off. Clicked on 'Turn on..' and nothing happened. Help!

  Hello

  See the following message to solve the problem of .exe if necessary once you are sure that the system is clean.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now), then
  Double-click it and run it like this. You can rename it back later. Do the same with others
  programs as needed. Use this method for other necessary - DO NOT ASSUMER one
  program removes all or that there is no other malware.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  There are MANY varieties of these with many names, but all can be eliminated with the same methods:
  
  Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
  scams to get you to pay for them while they have no advantage at all.

  How to remove all THE varieties of this malware - please read carefully the removal Instructions.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
  in the regular when windows you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
  UnHackMe execution)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download
  here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
  taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Problems with the bar code reader sample

  I want to integrate barcode scanner in my application, but it seems to be a lot more complicated than I thought.

  I use the example of BarcodeReader, and when I integrate his code 1:1 it works correctly.

  As soon as I try to change, however, is not.

  I want to:

  -use without a cover and an animation

  -have everything in a sheet with a close instead of a page button

  When I place "camera.open ()" in onCreationCompleted, for example, the camera is displayed as you wish, but the bar code scanner does nothing.

  I also tried to launch the camera delayed (of 200 or 400 MS) using QTimer::singleShot in c ++, the camera opens but still no scanning codes bar.

  A comment in the code example shows "Temporarily work around a bug", no idea if this could be related?

  This class is very buggy. You need to do initialization twice, the other after a delay of ~ 200 ms after the first. This makes the sample.

  I was able to make it work with the one-time initialization by defining the camera right after the creation of barcode detector:

  camera_ = new Camera();
  barcodeDetector_ = new BarcodeDetector(this);
  barcodeDetector_->setCamera(camera_);
  

  But if I change all the properties of the camera (such as the size of the viewfinder) during initialization or in viewfinderStarted() Manager of signal, it stops working and initialization of the double notch should be used to do work.

• 'Problem with the paging file Configuration '.

  I use a Windows 7 Ulitmate 64 bit vm on my 15 "MacBook Pro (Retina Display). I attributed to the VM 1 core processor and 2 GB of RAM. His virtual HD is 64.2 GB (molten ' preference > general ", but molten" Preferences > hard drive "the slider is set to 40 GB.) In "Preferences > general" there is no recoverable space. Looking at the control panel of Windows 7, I see that there is barely 1 GB free of my 40 GB drive.

  The SSD on Mac is 250 GB and has 67 GB of free, so I guess I could until hard drive of the virtual machine to 60 or 70 GB of space and not paralyze the Mac operating system, and that I can do that by stopping the virtual machine deletion of snapshots and then mount the virtual HD size with the cursor before restarting.

  Moreover, this is the message I get from Windows at startup. Curiously, it is only after I have connected to my account, not as part of the start-up procedure, and it reappears if I log in. I don't have an another user account on the machine, but I guess that the problem comes from the virtual HD is almost full:

  Yes, deletion of snapshots and enlarge the size of the virtual hard disk (and virtual partition) will give you additional disk space on the prompt to work with but how is virtual memory configured in the Windows 7 guest?  You can watch that too.

• Problems with the video file (wmv) path - Director Keeps restoring old road

  I am looking for assistance in obtaining a video playing live per floor in my movie once it is burned to CD.

  What I found is this work expected to use a relative path , and my film must find the video files very well.  However, I have great difficulty with this.  I was able to change the 'filename' from the video cast member to a relative path (@Video\videofilename.wmv) and the property inspector reflect this change.

  

  However, once I save, publish and check that it works, the film begins to search for the file in the original location.  What happened several times.  I changed the properties for the Member of the cast in the cast, as well as for the onstage cast member (not sure if their properties are related, so after a few troubled results, I tried to change both).  Whatever happens, the path in the file name field is back:

  

  I've even went up to remove the videos of the scene and casting, then add them again, using only the relative path in the file name field, does not.  The result is always the same: once I have save and publish again, the name of the file back to the absolute path.  To say the least, it's frustrating.

  Thank you very much in advance for your help.

  B

  The operator 'path' should be considered as the combination of characters "@:" or "@------" or "@/ ', then your path should be"@\Video\videofilename.wmv ".

  As you say, this should not give problems. If it persists, there are two options. Use Manager prepareMovie for the searchPathList and set the member.filename property before than the dialog box 'where's... ' is displayed:

  on prepareMovie
    _player.searchPathList.append(_movie.path & "Video")
    -- member("wmv").filename = "@\Video\videofilename.wmv"
  end
  

• Problem with the RTEXE file on PXI system

  I have attached the image of the comic to a very simple code that illustrates a problem with a file RTEXE on PXI system.

  If the VI (LabVIEW 2011) is started on the target of the RT of a LabVIEW project, no problem.

  If the code (with the shared variable linked to a typedef of indicator I32, lvlib being on target and ctl files) is compiled and run in starting my PXI system, it does not (message = "bad state" or something equivalent in french)!

  But when the shared variable is disconnected the typedef, the RTEXE file runs correctly in starting...

  No explanation for this strange behavior?

  A way to execute a RTEXE file on a PXI controller with shared variables typedefs?

  Thanx & BR,

  HL

  I have an answer on the french section of the forum: it's a LabView2011 bug, fixed in LabVIEW2012.

  LabVIEW2011 the only solution is to disconnect the shared variable the typedef

  Kind regards

  HL

• All of a sudden no sound in Windows Media Center, video playback. No problem with the same files in media player

  My windows media center vista has all of a sudden start to turn off randomly and restart by itself, about 3 weeks ago.  Now, he has lost his.  When I'm going through orders, no sound.  Video games, no sound.  I can still get sound for mp3, but not video.  I can play the same video in media player without any problem.  Can anyone help?  I have Vista Ultimate, service Pack2.

  Hi Doramon,

  Welcome to the Windows Vista answers Forum!

  What are the file extensions you are trying to play?

  This could happen because some of the types of files supported by Windows Media Player are not supported by Windows Media Center.

  To check the file types supported by Windows Media Center please visit the below given link:

  Types of files supported by Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-types-supported-by-Windows-Media-Center

  You can also try and run the System File Checker tool. This would be in repair of the system files that may be damaged.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  This would take care of the issue that you are facing.

  For more information, please visit the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the INF file trying to replace the USB mouse

  I am trying to replace a USB mouse that works but sometimes gives me double clicks rather than alone. But all the attempts to have it translated into the same error viz:

  "The driver for this device is missing a necessary entry, maybe it's because the file INF was written for windows 95 or later." Contact your hardware vendor. »

  The mouse I'm replacing is an optical mouse of Trust and so far I have tried 3 other optical mice - an ASDA brand, a Dell and a Logitech Value Optical Mouse. All with the same result.

  All the mice tried claim to be plug-and-play compatible with Vista (Home Premium installed). None came with the drivers and the last Logitech there is no download associated with it - I don't think this problem of the manufacture.

  Any ideas anyone?

  Old Man River,
  Thank you for visiting Microsoft Answers community forums.

  To run the checker system with administrator rights files follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  If that does not resolve your problem, try going into Control Panel configuration, Device Manager, expand the device of Interface Group.  Right click on all of the mice that appear there and uninstall.  Restart the computer and that he should find Windows driver and install it.  If it is not the case, go to Device Manager, click the view menu, click Show devices and see if there is an other mice which do not arise before.  If so, delete them and restart again.

  Please let us know the status of your question.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.