Problem with the ASUS Xonar DGX

So, first of all my problem is my sound is playing is no longer sound, and this started when I turned off my ASUS Xonar DGX Audio Device in Device Manager and reactivated it. I did this because whenever a game would break it would play a buzz and before today which can still fix this. I tried to restart my computer and do a boot minimum but before I did a clean boot, everytime my computer turned back, it says that windows could not find UpdateTool. I have ran virus scans with 3 different readers and not find anything, can someone help?

I should also mention that in my sound mixer, is showing the green light that she is out of her, but I guess I don't get it.

Hey,.

Try the article provided to solve the problem.

Updated a hardware driver that is not working properly

http://Windows.Microsoft.com/en-in/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

Tips for solving common driver problems

http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-fixing-common-driver-problems

Tags: Windows

Similar Questions

  • problem with the asus HD5570 graphics card

    computer just freezes and becomes unusable despite install and uninstall the latest software and drivers asus and amd.

    The motherboard is an asus P5RD2-TVM/S

    667ram (2X2GIG)

    Graphics card is an asus EAH5570 GPU. 1gig ddr3 Directx 11 and opengl 3.2 support

    I bought this card a couple of years ago and only just opened the box that allows the disk installation and all sorts. Not extremely loud fans all the time will not upwards or downwards, then it crashes right especially when on the internet, no matter what browser. I am really confused and don't have a clue what the problem might be apart from being incompatible with the motherboard.

    Any input is greatly appreciated.

    Thanks in advance

    Hello

    Thanks for posting your question on the forum of the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    1. the computer froze before installing the graphics card?
    2. have you made any changes to your computer hardware or software?

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run this Microsoft fixit and check.
    Reference:
    Difficulty of Windows system performance slow computer problems
    http://support.Microsoft.com/mats/slow_windows_performance

    If this does not help, then use method 2.

    Method 2:
    Please use the suggestions provided in this Microsoft support article and check.
    Reference:
    Optimize Windows performance
    http://Windows.Microsoft.com/en-in/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Please also check the compatibility of the graphics card with Windows 7 in the Windows Compatibility Center
    Refer to this article:
    Windows Compatibility Center
    http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

    See also:
    8.1 Windows, Windows 8 or Windows 7 hangs or freezes
    http://support.Microsoft.com/kb/2681286

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Hi, I also have a similar problem with my asus s550cm and whenever I try to access windows update window blocking, here is the link to my dmp file.

    Separated from this thread.

    Hi, I also have a similar problem with my asus s550cm and whenever I try to access windows update window blocking, here is the link to my dmp file.

    https://onedrive.live.com/redir?RESID=7D3CCE252116AC94%211981

    http://1drv.Ms/1F2ZEzq

    Thank you

    Separated from this thread.

    Hi, I also have a similar problem with my asus s550cm and whenever I try to access windows update window blocking, here is the link to my dmp file.

    https://onedrive.live.com/redir?RESID=7D3CCE252116AC94%211981

    http://1drv.Ms/1F2ZEzq

    Thank you

    Follow the steps in the link below, then try to update windows again.

    Difficulty errors of corruption of Windows by using the DISM tool / system update readiness.

    http://support.Microsoft.com/en-us/KB/947821

  • Map its ASUS Xonar DGX and Adobe Premiere Pro.

    Hello!

    I bought an ASUS Xonar DGX soundcard. I'll work on audio especially with a good headset.

    What technical considerations should I consider if I want to advance and and edit audio in first and other Adobe programs?

    I read something on the Adobe system requirments and map its compatible with ASIO or Microsoft Windows Driver Model Protocol, but it was not very clear to me.

    There are people who say that the Asus drivers are not the best and they recommend using third-party for asus xonar dgx to get drivers for best results. But they will work with Adobe Premiere?

    How can I make sure that Adobe Premiere will make use of my sound card?

    (technical info here: http://dlcdnet.asus.com/pub/ASUS/Audio_Card/Xonar_DGX/E7798_Xonar_DGX.pdf )


    Onboard Audio Chipset Realtek ALC892

    (technical info here: http://www.hardwaresecrets.com/datasheets/ALC898_DataSheet_0.60.pdf )

    Occurs a dedicated audio card for best results that the Audio Chipset shipped?

    Thank you!

    Thanks ECBowen!
    I don't plan to record sound using my computer. I just want to have the best possible sound quality when editing video or audio. Be it creation or hearing. As far I knew Asio drivers are used to reduce the lantency when recording audio.

    I'll use anyway pilots Asio?

    Thank you

  • the problem with the wi - fi does not work on windows 8.1

    Hello dear forum users (sorry for the English, use a translator)

    I have a laptop HP Pavilion dv6-7055er, 8.1 Windows 64-bit

    Card Broadcom WiFi 802.11b/g/n 1 x 1 4313GN worked on windows 7, but fails on windows 8.1. Tried to find the driver on the broadcom , but not found. Device Manager indicates that the problem with a PCI device. Specifies no problems with the Wi - Fi adapter.

    What could be the cause and how to fix it? Thank you!

    It seems that your WIFI adapter is not supported by Windows 8.1

    There are a few options available.

    The first and simplest is to purchase a USB wifi adapter to plug into one of the USB ports on the laptop. I have a dual ASUS USB-AC56 band that meets the 802.11ac specification.

    The second option will be to take a look at the installed optional wifi adapters to see if they have Windows 8.1 supports, buy one to replace the Broadcom card installed with.

    Ok. The two following adapters are compatible with your laptop and Windows 8.1. They have a BIOS support.

    The Qualcomm Atheros AR9485

    The Intel Centrino Advanced - N 6230 WLAN module

  • You try to run the system on my desktop restore encounters a problem with the program looping.

    Original title: System Restore loops

    Hi, I am trying to run restoring the system on my desk is a problem with the program in a loop.  He directs the system restore and then comes back just to start the system again Restore page.  How to solve this?  I started having problems when I have updated the BIOS on my motherboard.  When I installed the motherboard at the start, I think I used the incorrect installation disc (my son has same brand motherboard but the sound is more advanced).

    Recovery of your computer (Windows) using "Recovery Partition" of the Manufacture or
    contact PC manufacturing (see support links below) and order the recovery media.

    Note: Activation is not required when you use the recovery partition or recovery media, but you will need to reinstall all your applications.

    Also to save your documents on external support (if possible) before starting the recovery process.

    Once completed, your PC will be actually in the State when you first purchased it and turned on for the 1st time.

    To access the recovery Partition, start your computer, and then by pressing the appropriate function key. It can be either F1, F2, F9, F10, F11, F12, DEL or tab key. Check the list below or your user manual for your brand and model.

    If your hard drive has failed, do not have a recovery partition or the recovery partition is not accessible,
    Then, you must contact the manufacturer support team and ask for a "recovery disc" which allows to reinstall Windows 7.

    How access/start the process of recovery of the manufactures listed below.

    Acer: Press and hold ALT + F10, as soon as you see the logo
    http://Acer.custhelp.com/app/answers/detail/A_ID/2631
    Acer support: http://www.acer.com/worldwide/support/
    Acer recovery support: http://store.acer.com/store/aceramer/en_US/eRecovery

    Advent: restart your computer, then the immediate start by pressing the [F8] key or the F10 key.
    The fastest way to restore your computer is to use the hard disk recovery tools. You can access them by restarting your computer and then pressing the [F8] key or the F10 key until the Advanced Boot Menu appears. Use the arrows to select "Repair your computer", then press [Enter]. Read all of the instructions on the website of advent and made your choice as to the action you want to perform: http://www.adventcomputers.co.uk/restore-or-reinstall-windows-your-computer
    Support: http://www.adventcomputers.co.uk/product-support/support-services

    ASUS: Press or press the F9 key as soon as you see the Asus logo.
    http://support.ASUS.com/troubleshooting/detail.aspx?SLanguage=en&m=X53E&OS=&no=1775
    ASUS support: http://support.asus.com/contactus.aspx?SLanguage=en

    Dell: Press F8 directly after switching on / to start the computer
    Recovering detail instructions:
    http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_362066
    http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=52182
    Dell support: http://www.dell.com/support/home/us/en/19?c=&l=&s=
    Or: http://www.dell.com/

    EMachines: hold the Alt key and hold press and release the key F10
    http://Techchannel.RadioShack.com/eMachines-system-recovery-1747.html
    Support: http://www.emachines.com/ec/en/US/content/support

    Fujitsu: Press F8 several times directly after switching on
    https://answers.Yahoo.com/question/index?QID=20110406074143AAcx1Zw
    Support: http://www.fujitsu.com/global/support/

    Gateway:
    http://www.ehow.com/how_6297937_restore-gateway-laptop-factory-settings.html
    https://support.gateway.com/s/software/Microsof/Vista/7515418/7515418su531.shtml
    Support: http://www.gateway.com/worldwide/support/

    HP Notebook: Usually to begin recovery process press the F10 key, power on the computer
    HP Mini: Press F11 directly after switching on / to start the computer
    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01867418&cc=us&destPage=document&LC=en&tmp_docname=c01867418
    Support: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

    Lenovo uses the F11 key to launch the restore process:
    http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4UFUYK
    Directions for Lenovo OneKey Recovery, hidden partition and recovery DVDs:
    https://support.Lenovo.com/us/en/documents/ht077384
    and: http://support.lenovo.com/en_US/detail.page?DocID=HT077144
    Support: http://support.lenovo.com/en/supportphonelist

    How to run Lenovo Onekey Recovery
    http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT062552
    Detailed as follows: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=127597018499211

    You can also find parts of this article from Lenovo worth reading:
    http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4VFUDU

    LG: Press F11 directly after switching on / to start the computer
    Support: http://www.lg.com/

    Packard Bell: Turn on your computer. When Packard Bell logo is displayed, press in and hold the ALT key while pressing the F10 key several times. Release the keys when a message that Windows is loading files.
    After the system recovery program has loaded follow the instructions to reinstall the operating system.
    Support: http://www.packardbell.com/index.html

    Samsung: Press the F4 key to the Samsung logo when you turn on first of all of the computer.
    Support: http://www.samsung.com/

    Sony VAIO Windows 7: restart and press "F10".
    https://CA.en.KB.Sony.com/app/answers/detail/A_ID/35585/p/48903, 49902,71663,71664/c/65,67/kw/recovery%20using%20f10
    Sony VAIO Vista: Restart and press "F8" repeatedly until the screen "Advanced Boot Options".
    https://us.en.kb.sony.com/app/answers/detail/a_id/41931/~/how-to-perform-a-system-recovery-using-the-vaio-recovery-center.
    https://us.en.KB.Sony.com/app/answers/detail/A_ID/41949/session/L2F2LzEvdGltZS8xNDA4MjI2NTAzL3NpZC8qWVBPbCpfbA%3D%3D
    Support: http://www.sony.net/SonyInfo/Support/

    Toshiba: Press on F12 or the value 0 (zero) key on the top of the keyboard (not the zero on the numeric keypad key)
    and at the same time, press the button power once to turn on your laptop.
    When the Toshiba screen appears; release the 0 key.
    References: http://www.mytoshiba.com.au/support/items/faq/71
    http://forums.Toshiba.com/T5/system-recovery-and-recovery/how-to-perform-system-recovery-Windows-7/Ta-p/279643
    Support: http://www.toshiba.co.jp/worldwide/

    Windows 7 - location of the Partition Recovery and information.
    "Configurations of drive partitions using the BIOS has recommended.
    Note: Check the diagrams of this article
    http://TechNet.Microsoft.com/en-us/library/dd744364%28WS.10%29.aspx

    J W Stuart: http://www.pagestart.com

  • Problem with the touchpad doesn't work is not on the computer.

    Today, I was on YouTube, listen to music, when I turned the volume up to full. My laptop (ASUS) is a VERY high - pitched shrill sound that would not stop until I turned the laptop on sleep. When I turned on the laptop back, the screeching stopped but my Touch Pad stopped working. Fortunately, I have a USB mouse which I use now. I tried following the instructions to activate the keypad, but it does not work. I restarted my computer, and that did nothing.

    Help would be GREATLY appreciated.

    (also, I had problems with this laptop in the past, involving having to solve every time turned to have internet access, but a day that goes by and now the internet accessibility works very well.)

    Hi Lucie,.

    Thanks for posting your query in Microsoft Community Forum.

    What is brand and model your computer?

    Problems with the touchpad can occur due to a number of causes, including cables that are not connected properly, lack of updates, corrupt or drivers incompatible or because of hardware problems. So, I would suggest trying the following steps and check if the problem persists.

    Method 1:

    Try to run the suite of equipment fixit and see if the problem still occurs.

    Hardware devices do not work or are not detected in Windows

    Method 2:

    See the additional steps provided in the following article.

    Mouse, touchpad and keyboard with Windows problems

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  • I have a problem with the DVD drive not detected on Windows 7.

    I built a new PC (I've built a few of them).  This time is not considered my ASUS BD player with Windows 7 DVD burner.  It is not in either Device Manager just do not at all recognized.  The BIOS for the ASUS P9X79 of luxury see the SATA drive without problem.  Sometimes after restarting the BD Player looks and functions perfectly, but when the computer goes to sleep or shuts down is usually not there when it is restarted.  Please help me solve this problem :-)

    Original title: optical drive not recognized...

    Hello

    Please contact the Microsoft Community.

    You have a problem with the driver DVD being missing on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

    Please answer these questions-

    (1) that you get an error message or error code?

    (2) did you have performed the steps in troubleshooting?

    (3) have you made changes on the computer before the show?

    I would like more information about the issue.

    Method 1-

    I wish that you are running the fixit-

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2-

    Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
    Back up the registry - http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

    I would have you look at the article-

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116#top

    Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

    Thank you.

  • Problems with the shortcut keys, suggestions?

    I have an Asus computer is a portable computer, N56VM. I have problems with my shortcut keys. I can use is no longer the fn + key that usually let me adjust the back of my bright keyboard commands, or my volume (mute, raise/lower the volume), however, my brightness on the monitor shortcuts keyboard still works, and so did my black screen key. Oh, and also, my toggle mouse shortcut is not no longer works. I was looking at the forums, and I upgraded my bios and also reinstalled my ATKPI files and still nothing. I think the problem might have to do with the mechanics of the system, but I am not sure. Any suggestions?

    Hello

    Welcome to the Microsoft community where you can find all the answers related to windows.

    According to the description provided, its looks that you are facing a problem with the system hotkeys, this problem could arise Hotkey readers or the parameters of the system.

    I suggest you day chipset drives and driver hotkey from the manufactures Web site and check if it helps.

    http://www.ASUS.com/notebooks/Multimedia_Entertainment/N56VM/#download

    Note: If the problem persists then I advise you to get in touch with the computer manufacture for further assistance and check if it helps.

    http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

    If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

  • problem with the configuration of the Windows on Windows 8 updates

    hated, I an asus X553M I think its name everything was fine but but now ever time I'll start up it goes to black screen (lack of configuration of windows, undo changes updates off your computer), then it will reboot, but it just back upward with the failure to set up the screen and it continues to is time and time again iv tried everything I have photos on the laptop that are too important to lose is there a way I could get him...

    Original title: help

    Hello

    Thanks for posting your query in Microsoft Community.

    I suggest you to start from the installation media and then Auto repair and check if it helps.

    Method 1: create installation media.

    Check out the following link to create an installation media for Windows 8.

    http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

    Method 2:

    Step 1: auto repair

    See the next procedure to start on the installation media and auto repair

    1. Insert media such as (DVD or USB key) and press the F12 key and click change default or any other option located at the bottom of the screen.

    2. In the next screen, click on the Troubleshooting option, you WinRE (Windows Recovery Environment) different options to solve the problems with the computer when it is in no State to start is displayed.

    3. Now click on repair automatic, this will open a wizard that automatically diagnose and repair problems with starting the computer.

    Step 2: System Restore

    See the next procedure to start on the installation media and perform the system restore.

    1. Insert media such as (DVD or USB key) and press the F12 key and click change default or any other option located at the bottom of the screen.

    2. In the next screen, click on troubleshooting option, allows you to display different options of WinRE (Windows Recovery Environment) to solve the problems with the computer when it is in no State to start.

    3. Now, click on the system restore, this will open a wizard that automatically diagnose and repair problems with starting the computer.

    Hope this helps, please let us know if you have further questions about Windows.

    Thank you.

  • We get an error "there is a problem with the device' while trying to use it on the computer of Windows 8

    Sir... my model of computation used is ASUS Q500A and I also have the problem with my may even of them I also perform step u said in this forum, but may not work... my Windows I have used is windows 8. Please help me tnx

    Separated from -.

    https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/getting-an-error-theres-a-problem-with-your-camera/9c494984-1178-4C3F-884c-80ac750d3fa6

    Hello

    Thanks for posting your query in Microsoft Community.

    This problem is usually caused due to hardware or driver related issues. I suggest you try to install the latest drivers for the camera on the Asus or Windows Update site and check if it helps.

    If the problem persists, then it would be better to contact Asus for more help on this issue. As this could be a problem with the hardware as well.

    Support from Asus: http://www.support.asus.com/

    Please do not hesitate to visit our Web site for any help with the Windows operating system.

  • I can not install Lightroom 6 after a problem with the pc and upgrade to Windows 10. "Errors occurred on your installation.

    Hello

    I am a user of Lightroom 4 since it came out and it worked fine.

    My system is based on a motherboard Asus Maximus III, the Intel Core i7 875K 2.93 GHz processor, card EVGA Geforce GTX 960 Graphics, Corsair Vengeance 8 GB of RAM.

    I used to have Windows 7 Home Eng 64 bit on it.

    After installing Lightroom 6 everything is fine again, but then the evil came:

    There was a problem with the pc, so I had to use the restore before installing Lightroom 6 point, bringing back me to Lightroom 4

    The problem is that somehow my internetbrowsers stopped working one by one. A virus? Norton was running, so it shouldn't.

    The restoration of an early version did not help the problem

    I needed the PC for work so I installed the free update for Windows 10

    Now, I can not install my Lightroom 6 more: it keeps giving me the following box:

    Schermafbeelding_120215_011519_AM.jpg

    Of course stop the firewall did not help. Looks like a standard sentence as well.

    How to solve this?

    Thank you for reading.

    Settle in the right forum.

  • Premiere Pro CS4 - problem with the monitor program.

    Hello. I am not able to solve the problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline panel and read it in the monitor program, vision in the monitoring program is not monitor of race: black or a small part of the picture appear... sometimes changing colors. ASUS P5QPRO Intel 9550 and Sparkle Nvidia GeForce 9800 GTX + 1024 DDR3; directX and the latest gpu driver are installed. Different configurations of Strath discs have been tested. Where I'm wrong?

    Although largely in the max. PrPro range, which is always likely to much larger size than that required. This ARTICLE will give you general information and a workflow possible.

    Coming from the camera, JPEG should be RGB already, so no problems with CMYK.

    Good luck and hope that helps.

    Hunt

  • Anyone having problems with the new iPhone LTE connection 7 on Verizon?

    I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

    (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

    (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

  • Sierra Siri, «I have some problems with the connection...» »

    Guys,

    I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

    Any ideas?

    Thank you

    N

    It's a network problem.

    Check the proxy settings that blocks maybe, or a firewall.

    System Preferences > network > Advanced (for your current connection) > Proxies

    Something there?

Maybe you are looking for