Problem with the backup

Similar Questions

• Time Capsule - problem with the backup

  Hej!

  I get the message "an error occurred during the file copying. The problem may be temporary. If the problem persists, use disk utility to repair the backup drive. "A bit of research on Google, it seems that to restart the time capsule actually perform a repair disk. So I did it. The problem comes back, and sometimes she disappears, if I restart the backup, which confuses me. Is it possible to view the error logs and check what is the problem? I'm afraid that the backup drive may have hardware problems. I bought time capsule airport little for more than a year (in Sweden).

  Someone else has encountered this, and what was your solution?

  Johannes

  Most of the questions is network... and the error messages may not clearly identify between a network and disk problem problem.

  I bought time capsule airport little for more than a year (in Sweden).

  How long this problem has been going since then?

  In Europe the warranty period may be 2 or 3 years by law.

  Certainly if you have AppleCare on a supported product... computer, ipad, or apple TV the TC will be replaced by Apple under warranty. Just explain your problem to them.

  If you do not have access to the warranty or replacement.

  I highly recommend that you check your drive TC if there is nothing on what you need... then do a single pass low level format. It's utilitarian airport disk tab Archive is here... then the clear operation.

  

  Erase use the single-pass option.

  

  It is a low level disk format. (Don't bother with 7 and never even dream of using 35).

  If the problem persists when you restart the backup I suspect network problems... or the TC is a failure... mine (a 3rd in 3 years) comes from the same way... I pulled the drive and replaced it with a better brand than the basic model known problem seagate used Apple.

• Problems with the backup copy

  New time capsule, try to copy the backup to the new airport. Instructions on the Apple Support site seem simple, but I'm missing something. I suspect that this is how I'm connected to the capsule, 99% of the time that it is WiFi.

  Here is the link to the apple site I use for instructions.

  https://support.Apple.com/en-us/ht204078

  I am able to connect the original airport time capsule base by the first 2 steps stations.

  I am able to stop the back-ups on the time capsule original airport

  I am able to complete steps 1-3 on "copy backups it to the new airport Time Capsule"

  However, I have no idea what step 4 ways.  After step 3 in the finder window, I see a yellow folder called data.  If I double click on data, makes that step 4 complete?  If I double click on the data of the finder window is titled 'data' at the top in the Center, but there is nothing in the main window (name, date modified, etc.)

  'Step 4 Mount airport Time Capsule original volume in the Finder by double-clicking'

  So if that is correct, and I go to step 5, 6 and 7, I end up with the same thing on the new airport tc finder window.

  I do not see that anything that is called a backup disk image to drag on.   I don't know what I'm missing.  The only thing I think it's that I'm connected to the CT via wifi or Ethernet cable, which is connected.  (I have an Ethernet cable connected directly from my time capsule org on my mac.  "But I do not have the active wifi, I do not see my tc).

  I don't see a green light on my LAN port on the time capsule. This tells me that even if it is connected, it does not work. I tried searching through the support of apple for solutions.  But there must be an easy way to get to work without being a guru of Ethernet network.

• TOSHIBA HDD STOR. E partner 750Go PA4280E - 1 HG 5 - problem with the backup software

  Hello everyone

  I recently bought an external hard drive TOSHIBA HDD STOR. E partner 750Go (PA4280E - 5 1HG) with preinstalled backup software Nero BackItUp & Essentials. Unfortunately the software does not work. When I double-click on it to start it, it starts to extract, but after a growth of 10%, there is an error message saying something like "data error".

  How can I get the software? Or where can I get new software that works?

  Thanks in advance for your help
  Aniona

  As far as I know, the software can be downloaded from Nero.com

  Check this box:
  http://APS2.toshiba-tro.de/KB0/TSB14034U0000R01.htm

• problem with the backup data in text file

  Hello

  The problem I am facing wihile, saving the data in the text file is that everytime when I'm slecting the path of the façade, data that are recorded are added with the previous data, not only in the new text, the new data set is saved but also, is there any previuos run for the program , the corresponding data is also present in this text file.

  However, when I change the same ''(file path) to 'constant' in the control block diagram, and then add the path of the file, it doesn't have this problem. Basically, changing the "file path" constant in the diagram of control block (so that it is displayed in the front panel) is at the origin of the problem.

  Help, please!

  Thank you

  Your shift on the loop Register For is not initialized. It will keep the value of the string since the last time that he performed. That initialize and it should solve your problem.

• Problem with the backup computer virtual to Virtual Center 4 with VDR

  VC in Vsphere4 is the virtual machine. When I try it with VDR save there is an error failed to create a snapshoot because the operation has timed out.

  VC is Windows 2003 Standardx64.

  I know the problem with vdr and VSS service and so on, but I does not do so in this situation.

  All reviews are useful.

  Thank you.

  Thank you

  What about the vssadmin list providers?

• Problem with the backup location Photo

  I just started using LR 4 for the first time.  On my first import, that I chose newly imported backup photos automatically on a device of spare hard drive on my Mac that I hadn't previously used.  After I finished with LR, I closed out of the app.  So I decided (Yes, it seemed a good idea at the time) to rename the hard drive, I decided to use for backups of my photo for "Photo Backup Drive.  However, when I then open LR, the ability to record automatic backups is grayed out.

  The option still listed the former name of the hard drive, so I went back in and renamed that animate its original name.  Back in LR, the option was nevertheless still grayed out.  You can see the name of path (initially selected before I renamed the reader), but the check box is not available and you cannot change the option.  It seems that the program was not able to recognize the change of name of path and then just locked up.  Does anyone know a way to reset this option from one location other than the normal selection point?

  Note, this is the place for my photos of automatic backup, not the rear location for my catalog (which is always the default file location 'Photos' and works very well).

  OK, problem solved.  It was not at all a problem of LR.  I didn't realize that when first go you back in the window "import" the Central selection automatically default the option "add" (to import a photo without moving or copying this).  Therefore, if you choose "Copy" or "copy as DNG' rather than 'Add', the possibility to choose a location for an automatic backup becomes non-greyed and the tick becomes available.  You can then use the selector drop-down list of re - choose the location of your backup files (and it recognizes the current name of everything that you hard drives, even if you changed just one of them).  You can then delete any old path names.

  It was just a coincidence that she appeared to grey out after that I changed the name of the drive.

  Thanks to everyone who watched it and started trying to find an answer.

• Problem with the backup of the catalog

  After a full catalog backup I can't an increment backup catalog to complete. Is it possible to remove the full backup and run a NEW full backup?

  Yes. Make full backup to a new folder or disk, and delete the other oldest.

• Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup

  Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup.

  Backup not working in all of these songs/albums that appear also in personal playlists. Does not account for all of the media/music in Windows Media Player. It is also not known where there are additional tracks from the same album, appearing in a personal reading list, these additional tracks (that is, it will take 2 album, but ignore the other 10). Has only begun to occur in 2-3 weeks.

  Previously, when I set up the sync partnership, there are options in playlists 'Sync' discovers the device Set Up, such as 'All music' 'All images' "5 * appreciation of music" etc. None of them showing now also available. Offered only my personal Playlists. All solutions?

  Hi Phil,

  Thanks for posting your question in the Microsoft Community forum. I understand that you can't auto sync in Windows Media Player. I'll help you with this problem.

  Before troubleshooting, provide us with information.

  1. don't you make changes to the computer before this problem?

  2. have you updated to Service Pack 2 installed?

  3. don't you make changes to the computer before this problem?

  This problem may occur if there is an inconsistency in the system files related to Windows Media Player. Follow these methods:

  Method 1.

  Solve problems in Windows Media Player: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-problems-in-windows-media-player

  Method 2.

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click the Windows Media Player settings.

  Method 3.

  You can try to disable and enable the Media Player Control Panel.

  Steps to disable Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and uncheck the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Steps to activate the Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and check the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Method 4.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Security Scanner warning: there will be a loss of data through an analysis using the Microsoft safety scanner to remove any viruses found.

  Additional information.

  Set up a device to sync in Windows Media Player: http://windows.microsoft.com/en-US/windows-vista/Set-up-a-device-to-sync-in-Windows-Media-Player

  Windows Media Player sync: Frequently asked questions: http://windows.microsoft.com/en-us/windows-vista/windows-media-player-sync-frequently-asked-questions

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• Problem with the Dell recovery and backup system

  Hello

  I have problem with dell backup and restore in my dell laptop (inspiron15). When I select the backup factory option > choose a drive then continues, he said 'Please sustained insert blank to keep media. "
  However, blank disc is already inserted and formatted with the live file system. Please help if anyone has the solution.

  Thank you

  Hello

  Thanks for your reply.

  Usually, the blank DVDs would be already formatted and ready to use as they are writing discs once. Please try to create the backup disk without formatting the DVD.

• Siri does not (problems with the connection)

  Hello

  I installed macOS Sierra yesterday. Everything seems to work fine, except Siri. With Siri I always get an error message "I am having some problems with the connection. Please try again in a moment. ». But this seems to appear every time. The network connection works fine, I can't access the Internet without problem.

  No idea how solve the problem?

  I use an iMac (27 inch, mid-2011). Internal microphone is connected, I also see the 'waves' change while I am speaking.

  Concerning

  Thomas

  Hey, thochstrasser. Thank you for using communities of Apple Support.

  It seems that Siri is reluctant to make his debut on your iMac after upgrade to Mac OS Sierra. I want to make sure that you get the benefit of this new feature on a Mac.

  1 try safe mode if your Mac does not start -even if your iMac to market, safe mode makes sure it starts successfully.

  2. How to test a question in an another user account on your Mac - since this is most likely a software problem, test to another user will indicate if it is right to your user account or throughout your system.

  3. use Time Machine to back up or restore your Mac - if it seems to be systemic, the next step should not cause problems. But it is always better "to have" a backup to the "need".

  4. on OS X Recovery - the issue as part of the operating system, reinstall should do.

  Have a great weekend!

• iOS 10 problems with the Mail application

  Dear Apple and community support,

  Here's my problem:

  I have upgraded to iOS 10 on my iPhone 5s this afternoon (September 13), and now I'm not able to open e-mail - Yahoo!, and Gmail. I can receive emails, I'm not able to view the body of these emails. When I press on them, all I see is a blank white page. I can't answer emails either. I can only their flag or remove them. However, I am able to compose new e-mail messages.

  Here are the steps that I've taken to try to solve my problem:

  1. Restarted my phone
  2. Remove and re-add my Mail accounts
  3. Made a backup and a restore full while that plugged into my laptop with the latest version of iTunes.

  I should be grateful if you would help or more information on this issue.

  Thank you

  Emily

  I also have problems with the Mail application.  On my iphone, ipad, and Mac Pro.  I have several addresses, a MSN, another on Go Daddy and Gmail.  I have various weird problems with threads and every day he re-charge my emails, like if I have never read before.  Something is really problematic with Mail.

  Can the people of APPLE, you help me?

• Problems with the battery drain on iPhone 6

  Hello! This is my first time posting but I had some problems lately with my iPhone while keeping a charge.

  So, this has started to happen a month ago (exactly one year after I bought my iPhone) and my battery drains just exponentially and evacuates it sometimes when I'm not using it and the internet is not on. For example I'll fully my phone until I fall asleep and I'll put it on airplane mode before going to sleep. By the time I wake up, the battery will be down to 60%. I do not use it during this time, I don't get notifications because all data and the internet is disabled. I do not understand why it is empty.

  Anyway, I've taken to the Apple store Genius bar twice now and they have not been able to fix it. They have tried to restore it... I did that before I went to the Apple store, but they decided to do it again and the second time the guy just told me to turn off all the background app refresh or anything I did but it we continue to attract.

  When I was at the Apple store, they also checked my battery and everything was normal. I got 100 below the number of average cycles since the age of my phone and the battery was in the green at 94%.

  I am really frustrated after two trips to the store person has managed to fix my phone and I have the impression that they will try to coax me to pay for something that won't fix my phone. Also if there is a problem with Apple hardware and nothing of what I've done so why should I pay for it when it started to happen at the level of the one-year mark. It's so boring, but if anyone else has had a similar situation for advice or assistance would be greatly appreciated.

  a4annalisa wrote:

  When I was at the Apple store, they also checked my battery and everything was normal. I got 100 below the number of average cycles since the age of my phone and the battery was in the green at 94%.

  I am really frustrated after two trips to the store person has managed to fix my phone and I have the impression that they will try to coax me to pay for something that won't fix my phone. Also if there is a problem with Apple hardware and nothing of what I've done so why should I pay for it when it started to happen at the level of the one-year mark.

  Yes that is exactly what they are trying to avoid. As you explained that you have visited it there twice to attempt to solve this problem, they could have offered to replace your battery for $79 that with your current battery showing 94% of its original capacity, that would not have done much for you at all.

  Have you been having problems with the reception of your carrier recently, when all this started happening? Were you see 1 or 2 points of service when you used to see 3 or 4? When you have restored your iPhone, you restore it as a new iPhone or restore a backup top later? Just try to refine some possibilities for the continuous emission.

• Starting problem with the gray screen on iMac

  Hello everyone

  I'm a bit puzzled with a problem I'm having with my iMac 27 "a model late 2009, bought in early 2010, I had built at the time with 8 GB ram, 2 TB HD and fastest i7 Quad core processor available at the time.

  I'm running El Capitan, and all wise OS is perfectly up to date.

  The other week, after a systematic restart, I have a gray screen and little else.  Another reboot and everything was "normal", so I did not concern me unduly.

  Today, after that the Mac had been idle for a time during a call, the screen fell asleep as usual (I do not SLEEP the computer itself), but during his return and touch the SPACEBAR and key "ESC", the screen remains black.

  So I made a forced shutdown and restart.

  I get the screen gray and normal startup (no other sounds) chime followed by the apple logo and the startup progress bar.  He gets to halfway through the long, and then instead of bring to the top of the login page, it's just going to a gray screen Uni.

  So I restarted in safe mode, OK and ran disk utility a couple of times - at the first crossing, he noted, there a problem with the map of partition which can cause problems starting, but on the second passes and the following, everything has been noted to be OK - and the SMART status of disk has been verified.

  After a reboot - the same question as above - of carillon, gray screen with the apple logo, progress bar and then just a gray screen.  I did another secure boot and re-run of disk utility, rebooted into recovery mode and run disk utility.  And again, no problems reported.

  Another reboot and the issue was always there.

  So this time I rebooted into recovery again mode and downloaded a new installation of El Capitan.

  Unfortunately, there is no set - it is always start on a gray screen after the startup chime, the apple logo and progress bar.

  I have also removed all my account account startup items and disconnected all USB devices.

  I'm a bit lost for what to do next to be honest!

  Is there anything else I can do software wise, at home, or is it time for the repair material re shop perhaps?

  Thank you very much for your words of wisdom and support

  Kind regards

  John... :-)

  John here again: :-)

  Just a quick update which may help to determine what the problem is: I restarted in safe mode, after the reinstallation of the operating system was unable to initialize properly - grey screen again.

  However, as I have a home network, I found that I can not connect on the network with my MacBook Pro to the iMac, see all my files user on the iMac and even copy them across to the MacBook Pro with no problems.

  Everything on the iMac is saved via Time Machine on a Western Digital Firewire HD 3to.

  I also have uncompressed manual 'straight' copies of my music, movies, documents folders, etc, for an old time Capsule, currently acting as a bridge to my ethernet network wireless, and provide additional backup for those critical files - my music for example is ripped 350 odd CD, all legally purchased in ALAC on iTunes on the iMac - which represents a couple of months of work... lol... no way I want to lose that!

  So I'm a bit of a loss.  Disk utility reported no problem with the drive... I can boot into safe mode and recovery, but normal mode 'mode '... I always get the chime, the screen with apple logo and progress of the gray bar, then goes to just a gray screen instead of the login page.

  Help!

  My beloved Einstein had a hiccup!

  All comments appreciated and thanks again - hope this extra info helps

  Kind regards

  John... :-)

• Problem with the module "Automation" in WindowsAzure

  Top: Problems with the module used "Automation" service "WindowsAzure.

  Hello!

  I really need your help to decide my problem of "Azure Automation". My boss has set a task for the 'Automation' module allows you to make a backup of Virtual Machines.

  To understand my problem, I do the next:

  1. describe the situation of all;

  2. describe the problems that appear in this situation;

  3. my conclusions.

  In addition, I am attaching the necessary information: my PS-scripts (from Windows and the automation of azure), log (with my notes) and screenshots (images with my notes) see file .rar Add_info (annex).

  1 description any situation

  For our development projects, we have several Virtual Machines on service cloud "WindowsAzure. We need to make backups of discs with Virtual Machines each week. Earlier, for this task, I used Windows PowerShell on my computer and my PS-script (see Ann 0 - VM (backup) of the WPS_snapshot). I created a new storage 'backupstor' and containing 'snaps-drive '. When I run PS-script with my computer, I have backup of disks virtual Machin in the container "snaps-disk", without problem.

  Now I have a new task "automatically make the process of creating backup of Virtual Machines (VM snapshots). I tried to use automation module (overview). Can I change my PS script for the 'Automation' module and create folders (see Ann 1 - records (make backups of virtual machines) _Azure_Automation).

  I need to make a backup of Virtual Machine 'bosard' in the cloud 'cloudnet. "Bosard" on the disc size ~ approximately 90 000 000 000 bytes (total size of the default drive size 127 GB/136 367 309 312 bytes)

  2. description of the problems that appear in this situation

  My steps:

  1. I start files to make a backup of Virtual Machine disk (see annex 1 - files (make backups of virtual machines) _Azure_Automation))

  2. it starts successfully and generate the name of backup 1 (blob) - snapshot-bosard - osdisk_07.10.2014_07h00m39s.vhd (see image 1 - start copy backup 1 and annex 2 - log file copy process)

  3. the process of backup copy 1 (blob) will...

  Problem 1:

  4. the process of backup copy 1 (see Appendix 2 - process log file copy) automatically stops and complete to copy the part 1/3 bytes copied 28311552000only. Important: The size of my virtual machine disk ~ on 90 000 000 000 bytes.  (Maximum possible) of total capacity of the disk where the Virtual Machine is used - 136 367 309 312 (127 GB). (See picture 2 - stop backup copy 1)

  5. I have Virtual size 1 backup - 28311552000bytes, when the size of my VM - 90 000 000 000 / 136 367 309 312 bytes.

  Problem 2:

  6. after the termination of the process automatically makes copy backup 1, records (see annex 1 - files (make backups of virtual machines) _Azure_Automation) automatically start (see picture 2 - stop backup copy 1) and folders automatically create new snapshot Backup 2 - name - bosard - osdisk_07.10.2014_07h31m33s.vhd (see annex 2 - process log file copy, image 3 - stop the copy backup 1 & Begin copy backup 2 and 5 - backupStore_Azure (process)of image)

  7. I pressed "stop" and stopped the process of copy and folders (picture 4 - I stopped the process of creating backup 2 & records). And how result I had size Backup 1 and 2 = 0 bytes (see image 6 - backupStore_Azure (I order records))

  Note:

  1 problem 1: the process of backup of virtual machine does not complete and stops automatically.

  2 problem 2: the process of creating new second backup starts automatically. And as a result, we do not have the backup of virtual machine, when I use the 'Automation '.

  3. my conclusions

  I think that:

  1. my PS script for Automation (files) is not correctly. Then I need your help, how to fix this.

  2 may be the module "Automation" is not working correctly. And the module 'Automation' needs repairs and settings.

  In addition, I am attaching the necessary information (see the Add_info (annex) .rar file):

  Ann WPS_snapshot 0 - VM (backup)

  Ann 1 - records (make backups of virtual machines) _Azure_Automation

  Ann 2 - log file copy process

  image 1 - start the copy backup 1

  image 2 - stop copy backup 1

  image 3 - stop copy backup 1 & Begin copy backup 2

  4. I stopped the image create backup processes 2 & records

  image 5 - backupStore_Azure (process)

  image 6 - backupStore_Azure (I order records)

  Thank you

  Kind regards

  Mikhail

  Hello

  You can get the assisted support from the following link on this point:.

  http://azure.Microsoft.com/en-us/support/options/