Problem with the battery and the power cord.

Similar Questions

• (Redirected) problem with the power supply on Alienware X 51

  I have a problem with the power supply. I can't run all the games with good graphics, if I try to run any game, my PC turns off and a small lamp on the power supply shuts down. It began a week ago, and before it was normal.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• I am facing a problem with the POWER of ODIN 9.1.0.5, my broker is Indiainfoline, my OS is Vista ultimate, when I login, everytime I get an error 'System Error (10055) (setsockopt)'.

  I am facing a problem with the POWER of ODIN 9.1.0.5, my broker is Indiainfoline, my OS is Vista ultimate, when I login, everytime I get an error 'System Error (10055) (setsockopt)'.

  Check out these links:

  System (10055) error (setsockopt) Solution
  http://www.win7heads.com/software/82898-system-error-10055-setsockopt-solution.html

  ODIN request does not work Windows 7
  http://social.technet.Microsoft.com/forums/en/w7itproappcompat/thread/ddbe30c8-f4c6-4B8F-ac91-85aa07191ea3

• Problems with the Power Manager 1.51 new T60 has

  I've updated Power manager version 1.51 has and I have problems with the gauge of Power Manager in the task bar. Life remaining battery is not updated once more. Is there any chance I can find an earlier version of the software that worked perfectly before? Or there is a method to solve the problem?

  Sincerely,

  Nikita Septucha

  
  

• I have a problem with the power off of Microsoft Security Essentials.

  Original title: cannot close Microsoft Security databases

  I have a malware called yellow Moxie and I can't seem to go in... I need to know how to disable Microsoft Security Essentials to clean malware off the coast.   Is it possible to temporarily suspend protection?

  Try to start in safe mode with network, then scan with the free version of

  http://www.Malwarebytes.org/products/malwarebytes_free/

  If no repost of joy for specific groups of viruses

• Problems with the power of the Xbox 360 WRT54G signal

  Here's what I have high down.

  ActionTek GT701 (Qwest 7.0Mbps)

  Linksys WRT54G

  Reference Dell 530 (wired)

  XBOX 360 Arcade (wired)

  XBOX 360 Elite (wired)

  Printer Dell Wireless (wireless)

  Dell Dimension 2350 (wireless)

  I started with an xbox connected to the linksys router and had the excellent signal (HD quality) for Netflix strength. I added the second xbox and was still five bars of signal strength. About three days ago for netflix on the xboxs signal strength is only cut up to two bars. The rest of the House working at full power, but I can't get Netflix on the xboxs back to what is a. I tried to reset the two routers, by disconnecting and then changing the port to the xboxs, upgrading the firmware for the router and finally tried just an xbox connected both. (not in that order)

  I contacted Netflix and thay make any change on the end there, no changes have been made by my ISP.

  Xbox live is running at full speed, I'm not able to get the strength of Netflix.

  Any help is greatly appreciated. We use no cable, and that's how my family watches TV

  Just a note speedtest .net - downstream - 6: 19 (average of 3 tests)

  Upstrem-. 69 (average of 3 tests)

  If the X - Box is connected by Ethernet, then, change the wireless channel wouldn't make any difference. I suggest to update the firmware on the router, reset the router and reconfigure go to zero and then check the signal strength.

• 7535 notebook has always had a problem with the power supply fitting loosely in the computer now

  My 7535 laptop has always (from the initial installation) had a tenuous when plugging in the adapter.  Most of the time I had to move the entry or causing some kind of tension to keep it connected.  Now it doesn't connect at all... I even ordered a new adapter, but it's certainly the computer.  Is there a way to fix this?  I was not able to use my computer for more than a week now waiting for the new card but still not be able to connect and the battery is almost gone.

  I appreciate any help or suggestions.

  the repair is service call

• I have a problem with the Power Point Viewer.

  I try to install PowerPoint Viewer on my laptop (Win 7 64 bit), but the installer says it cannot install the program because it lacks oart.dll. I tried to copy this file from my desktop to the laptop computer, making sure that I copied it to the same location as on my desktop, but I still got the same message.

  Helps to solve this problem would be appreciated.

  Thank you and best regards,
  Roy

  I have re downloaded the installer from the Microsoft Download Center and installed without any problems.

  Kind regards

  Roy

• problem with the connectivity of customers after mixing several models with WLC 5508 Setup WLAN ap

  Hello

  I have 2 5508 wlc and AP 1130 and 1200 in my test harness.

  Currently, WLAN set is in place and works very well but the customer become a frequent problem with the power of the weak signal same AP is installed very near the place of the customer.

  I have my doubts, if I have a question because I use several models of AP in my set-up?

  How to rectify the same question?

  Some time customer gets limited connectivity, means that they usually get IP also.

  What are all the parameters to check in WLC?

  (1) very difficult for a person on a forum to respond. Check if your AAA server was indeed seen as inactive at the same time for other devices.

  If this is not the case, check the network connectivity between the 2. Maybe packets are lost between wlc and aaa server...

  (2) as I mentioned, it may have nothing to do with clent near or far from the AP. What happens if your DHCP server is not responding to the client? What happens if the dhcp request never reaches the level of the DHCP server for some reason any?

  You must investigate all along path to find out why the customer is not getting an ip address.

  Troubleshooting involves trace of sniffer, debug, client, etc...

• Equium L10: Problem with the main battery and battery RTC

  Hello

  I have the Toshiba Equium L10 and it is about 14 months old and I have problems with the battery and how much time it takes after a full charge. I also have problems with the RTC battery and an ERROR 0271: check date and time settings message when I turn on the laptop.

  Regarding the battery, I can fully charge it upward in about 3 hours, but when I start to use it, apparently in the last few hours around one and a half or so and then it needs to be recharged. I can have down for about 40 minutes and then turn it off and come back later or in a day or two. How long should I expect from a fully charged battery?

  About the batttery RTC, it really becomes a pain and I only started to get the message of the ERROR 0271 start-up, in recent weeks. I can charge the battery pack and then leave for a few days, but when I turn it on, I get the message ERROR 0271 on the date and time incorrect. Surely after a full charge, the RTC battery should last longer than a few days?

  The manual says that if the RTC battery is exhausted or becomes weak, you must charge the battery of the CCF for 24 hours, in a different part of this manual indicates between 24 and 48 hours, but how can load you for long when the sections concerning the charging battery pack status after charging the battery you unplug the power adapter because leaving connected will shorten the life expectancy of the Battery Pack. So, how we can charge the battery of the CCF for 24 to 48 hours if we shouldn't leave the AC adapter plugged in once the battery is charged - which is nearly three hours. Suggestions about these problems would be appreciated.

  Besides we all know that it is easy to change the CMOS/RTC battery in your desktop base unit, but is it easy to change in a Toshiba Equium L10?

  Concerning

  Brave0

  Hi Brave0,

  The normal recommendation for the CMOS (RTC) battery is to leave the laptop connected to the power supply at least 12 hours when the main battery is fully charged. The charging circuit is going to hijack the current to the load automatically RTC battery and no current will be forwarded to your main battery.

  Recommendation do not leave the power adapter is plugged in the main battery is fully charged is really only applicable to older laptops that used no batteries Li - ion and therefore they had to be completely discharged before recharging to avoid any effect 'memory' of the battery.

  With modern Li-ion batteries, it is quite safe to leave the battery when fully charged and still power the laptop from the AC adapter. The charging circuit will pass all the battery charge if it is fully charged.

  Kind regards

• is it safe to run my compaq presario cq62 without the battery and the power cord attached?

  My laptop told me that my battery should replace... I have to keep my power cord in now all the time coz my battery poer only changed as 5 minutes... is it safe out of my battery and run the laptop the power cord?

  Hello:

  Yes, you can do it.

  Is it a matter of having a lighter weight?

  You can also run the power cord with the battery installed.

  Sometimes the battery is so bad that you have to remove and the laptop will not work with the battery removed and plugged power cord.

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• I had a power failure and I learned today that there is a problem with the cache and I need to go to Preferences, purge the cache. I did this, but get the same error message every time I open the subsequent times of bridge.

  I had a power failure and I learned today that there is a problem with the cache and I need to go to Preferences, purge the cache. I did this, but get the same error message every time I open the subsequent times of bridge.

  Mac or PC? Version of the OS? What version of CS?

  Have you tried to reset the bridge? CTRL (Windows) / Opt (Mac) + click on the bridge to start icon and select open boxes.

  Otherwise, you could manually delete the cache, but we need to know the answers to questions to say where he is.

• Pavilion m6 - stop suddenly and mystery of the power cord

  Hi people,

  I got a very strange problem with my laptop from m6-1035dx Pavilion the past two days. This is a reconditioned unit and have had some problems with it in the past (both hardware and software-related) that I managed to fix me, but this one left me speechless.

  It started yesterday when the computer was placed on a bed (with a CoolerMaster pad below, which I almost never separate the portable device) and immediately turn off the power. In the past, I had problems with heat stops, that I solved with a bit of air in canned and CoolerMaster pad said, so I don't think much. But the same thing happened today, and I noticed that when it has restarted, it does not recognize the fact that the computer is plugged in. Unplugged the cord/AC converter to three points (computer, converter, wall) and tried again, still nothing. Tried another outlet, blew the vents, power off and removed/re-inserted battery, still no recognition of the power. I reinstalled HP CoolSense (which I had removed several months before) and hope that would take care of things. Meanwhile, I shut the computer off again, and the LED power indicator lit on its own.

  Several hours later, the computer was reactivated and placed on a flat surface. Someone tripping over the cord, and the computer turns off again. The LED power indicator is out once more, so I unplugged the power cord and left for a few minutes. Blocked again, and the power was back.

  I am reasonably confident that I should replace the power cord at this point, but I want expert advice before I commit the money that him. It may also be interesting to note that while the power cord did not work, the battery (92%) had about two hours and six minutes of use remaining, which is well below the advertised battery capacity (to be noted that only Chrome was running at the time) and what I saw of the battery in the past. I think that the cable or converter can be shorted, then is it safe to use the computer at all? Wouldn't be a good idea to replace the battery as well? I will provide any other details if necessary and thank you in advance for any help or advice.

  Hi maestro35,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having feeding problems with your Pavilion m6. I'll be happy to help you with this. If it is running with the battery, I wouldn't worry about the replacement of the battery quite yet. As for the fact that it gives you less time announced that it could be the mere fact that the battery life decreases over time. You don't mention your operating system, this is why I have included two links below which will allow you to test and calibrate the battery. This will confirm that the battery is working properly.

  Test and calibrate the battery (Windows 7)

  Test and calibrate the battery (Windows 8)

  I agree that it appears as if the power cord is the question. If you have a similar cord, you might give it a try to see, but there's a chance it might be the prospects of power supply for laptop. If something is shorted, then you shouldn't really use the laptop but without testing actually physically we will not be able to determine if something is put in short circuit.

  Thank you

• Presario CQ20-320TU: my notebook (presario CQ20) directly turn on when I plug in the power cord without battery

  My laptop (presario CQ20-320TU) turn directly every time I plug the power cord without battery. What is the solution?

  Hi there @emonsonjaya,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that your notebook is turn on/off automatically when it is plugged. I'm happy to help you.

  I would recommend that you look at your BIOS, especially in power options and check if your BIOS has a setting option on automatically. If yes it change at your convenience.  Another option would be to update your BIOS and see if that solves it.

  Here is the page of support for your model and, if necessary, give it a try, it will automatically download the file if you click on the link. You then need to run the executable file of your current download folder.

  HPQFlash for HP Notebook System BIOS (68PHU) - Microsoft Windows-Based

  If you are having problems with an update of the BIOS, you can always restore it, using the following:

  HP Notebook PC - restore BIOS

  I hope this helps.

• PC laptop battery not charging but laptop works with the power adapter... which is wrong

  My power supply battery icon States attached but do not load, why

  Hello

  Download and run the test utility of battery pack available on the next page and see if it reports any problems with your battery.

  http://h20239.www2.HP.com/TechCenter/battery/battery_ts.htm

  Kind regards

  DP - K