Problem with the Cisco VPN and Vista client

Hello

I have an easy VPN server configured on a c2811 and users use the Cisco VPN client. Lately, I have users running Windows Vista 64 bit and I need to know what is the correct version of the vpn client, I have to use and the compatibility problems with the server, I configured.

Thank you and best regards.

Cisco VPN Client doesn't have any version that is compatible with Vista 64 bit OS. The only customer that Cisco has released that supports the 64 bit OS's AnyConnect, but it is only supported on the CISCO ASA Appliance

Tags: Cisco Security

Similar Questions

  • Equium L10: Problem with the main battery and battery RTC

    Hello

    I have the Toshiba Equium L10 and it is about 14 months old and I have problems with the battery and how much time it takes after a full charge. I also have problems with the RTC battery and an ERROR 0271: check date and time settings message when I turn on the laptop.

    Regarding the battery, I can fully charge it upward in about 3 hours, but when I start to use it, apparently in the last few hours around one and a half or so and then it needs to be recharged. I can have down for about 40 minutes and then turn it off and come back later or in a day or two. How long should I expect from a fully charged battery?

    About the batttery RTC, it really becomes a pain and I only started to get the message of the ERROR 0271 start-up, in recent weeks. I can charge the battery pack and then leave for a few days, but when I turn it on, I get the message ERROR 0271 on the date and time incorrect. Surely after a full charge, the RTC battery should last longer than a few days?

    The manual says that if the RTC battery is exhausted or becomes weak, you must charge the battery of the CCF for 24 hours, in a different part of this manual indicates between 24 and 48 hours, but how can load you for long when the sections concerning the charging battery pack status after charging the battery you unplug the power adapter because leaving connected will shorten the life expectancy of the Battery Pack. So, how we can charge the battery of the CCF for 24 to 48 hours if we shouldn't leave the AC adapter plugged in once the battery is charged - which is nearly three hours. Suggestions about these problems would be appreciated.

    Besides we all know that it is easy to change the CMOS/RTC battery in your desktop base unit, but is it easy to change in a Toshiba Equium L10?

    Concerning

    Brave0

    Hi Brave0,

    The normal recommendation for the CMOS (RTC) battery is to leave the laptop connected to the power supply at least 12 hours when the main battery is fully charged. The charging circuit is going to hijack the current to the load automatically RTC battery and no current will be forwarded to your main battery.

    Recommendation do not leave the power adapter is plugged in the main battery is fully charged is really only applicable to older laptops that used no batteries Li - ion and therefore they had to be completely discharged before recharging to avoid any effect 'memory' of the battery.

    With modern Li-ion batteries, it is quite safe to leave the battery when fully charged and still power the laptop from the AC adapter. The charging circuit will pass all the battery charge if it is fully charged.

    Kind regards

  • problem with the Finder - files and folders displaying incorrectly

    After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

    This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

    Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

    I decided to do a clean install of the operating system but nothing works.

    Is there some setting in Prefs I'm missing?

    Hi there highland99,

    Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

    Thank you for using communities of Apple Support.

  • I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

    Original title: right click on the mouse itself activating

    I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

    I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

    Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

    Try to install the drivers from this link and check.

    http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

  • I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

    Photoshop has been giving me the warning:

    Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

    Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

    No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

    Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

  • How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen.

    How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?

    It should do.  You use one of the buttons of pen maybe?  Just touching wheels with the pen with no buttons or modifier keys.  Press ENTER to close the selection.

    Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool.  I also use the mouse instead of the Tablet for the selection of cutting edge.  It is a little too uncertain where the point will go when hovering the stylus above the image.

  • Problems with the radial tool and the gradient filter tool.

    I have suddenly problems with the radial tool and the tool filter degraded.  They are turning to my red while selection that the assets and not with the results of the any adjustments.  It is a new issue and out now where

    Does that help? Note that the tool must be active to see the check box.

    In addition, another reason, that you do not see it could be that the toolbar is not displayed. The toolbar display switch is to press the letter T.

  • Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

    Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

    You're apparently talking about Photoshop, so I'll pass this on Photoshop beginners forum.

  • Problems with the video card and sound card on Toshiba model #PSLCOU - 02701G

    I bought a new laptop in 2009, and it is a Toshiba, model #PSLCOU - 02701G. After about three months the video card and the sound began to spoil. It's what he does, I can go on U-tube or any web site that has a video to watch like CNN news, etc. What it does is it starts to play and the video and the sound is good and he paused for a few seconds and starts again, new breaks and pauses, starts, pauses, starts. He does it all the time, and I was wondering if you all have any idea whats going on? Help? Help?

    It really sucks when you try to watch the news. Also, I put a CD or DVD into the laptop and it works perfectly. I can watch any DVD or listen to a GREAT Cd.

    How is your network connection?  Sometimes, the system needs to create a cache to store the downloaded information and if the download is not pass quickly enough the system will freeze while wiaiting for download to catch up - not a problem with your sound cards and video, but with the speed of Connection on the website or on the network itself (or your network equipment).  This looks like the case if the DVD and the CD's works fine.  Check your internet connection and try to download the video pages to see if the problem is with all the downloads, or only those on a site.  You can contact your ISP and have them help check you connection and settings and the modem for problems or changes, you can do to improve things. Sometimes happens to me as well in the internet connection runs slower than normal and there is nothing that I can do but wait to accelerate - and it's frustrating.

    You can get in trouble with your device drivers.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you need you to do all you have time to do, but at least the network card, sound card and video card - they can help way beyond simply solve this problem), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I had a few problems with the search engines and history

    My default search warning back to Yahoo after a reset on my computer. Close Firefox keep one to change but by restarting the computer, it takes.

    I can't open the sidebar history. The option "view the history of your" opens its tab fine (the drop-down menu that says 'Show History Sidebar', 'clear recent history... ("ect.). But, when you click on the "Show History Sidebar", nothing comes. Can I use the "Show history" option, but the sidebar does not open for some reason any.

    I just finished with a complete analysis of the Microsoft Safety Scanner and it said not that there is anything wrong. I have not reset the computer again to see if something has changed although after the factory reset (see the 2nd paragraph) it seems returned to Yahoo (search engine he kept going to happen).

    I open the history tab in the menu of the toolbar, and everything seems fine here. I also had him always use private off all first browsing mode. After activating the option clear history when Firefox closes, I ended up having to reset to factory settings (things he saves were saved isn't really a problem) that doesn't seem to fix the problem with the sidebar of history not to come.

  • Hello there is a problem with the iphone 6 and you do not want to connect to the Apple Store

    Hello there is a problem with the iphone 6 in more you won't connect to the Apple Store.

    Buenas tardes,

    Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything.

    Then sign out of the iTunes Store and reconnect.

  • problems with the internet connectivity and card # 2 microsoft tun miniport

    Hi, I have problems to connect to the internet and my laptop tells me them a problem with the modem / router. However, another laptop computer connected to the modem/router even works very well. in the Device Manager was an exclamation mark beside "teredo tunneling pseudo interface 10. then it disappeared and I found myself with an error with «#2 microsoft Tun miniport map» now his party in error teredo. I still only have a local internet connection i.e. no internet. not really have a lot of knowledge when it comes to computers. any help would be really appreciated.

    Hello

    You can try the steps in the similar thread to the next with a possible fix:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Teredo-tunneling-pseudo-interface-this-device/757db042-c91e-464c-B963-c1f442fdf925?page=1

  • Problems with the Precision M4400 and the graphic card Nvidia quadro 770M

    I have a problem with my Precision M4400 and Nvidia Quadro 770 M. After I installed Windows 7 64 bit, I have problems with the graphics card. I get a blue screen or graphic errors. I tried several versions of the driver. In the Nvidia forum had this problem even more. Here, they told me that only a BIOS update for the graphics card to solve the problem. Update the BIOS, but I should refer by DELL. So my question is this problem with Dell is also known, and there is already an update of the BIOS to the Quadro 770 M?

    Hi all

    I have the solution by chance. I was looking for the latest drivers GeForce for Windows 7 x 64 and I read the accompanying note: http://fr.download.nvidia.com/Windows/337.88/337.88-win8-win7-notebook-release-notes.pdf
    On page 17, you can read the following note to fix: "[GeForce FX 770 M] [portable]: blocking of the blue screen occurs after Windows starts."

    Of course, GeForce FX 770 M does not exist (and never was), and it should be Quadro FX 770 M. I can bet that nVidia has corrected this famous BSOD problem in the wrong driver because always there is nothing about any "Quadro FX 770 M - fix" in the note accompanying the latest Quadro (340.52) driver.

    You try the GeForce driver above, but to install it, you may need to download an INF file modified with the addition of the ID of Quadro FX 770 M (= "NVIDIA_DEV.065C ="NVIDIA Quadro FX 770 M"). Try without the first modified INF file because the Quadro FX 770 M is listed as a compatible chip in the version of the driver GeForce 337.88 note...

    I'll try that, even though I am completely sastified with the latest driver for Quadro (feasible) (285.62) without disable Powermizer. I did not try the latest Quadro drivers again (to be honest).

    Late me know please.

  • Problems with the sound burst and the screen.

    Separated from this thread.

    I have windows 7 and tried this suggestion and now my sound does not work.

    Hi Bill,

    You could be facing the sound related issue due to corrupted audio drivers. Please write us with the following details.

    (1) what is the brand and model of your computer?

    (2) don't you make changes to your computer before this problem?

    (3) what happens when you go to power settings You get an error?

    For the problem with sound I suggest to follow the steps in the link given below and check if it helps you.

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    For the problem with the brightness I suggest you follow the steps in the link below. You can ignore the steps under the heading setting brightness automatically using Adaptive brightness from the link given below.

    Adjust the brightness and contrast of your monitor

    http://Windows.Microsoft.com/en-us/Windows/adjust-monitor-brightness-contrast#1TC=Windows-7

    Let us know the status of the issue.

  • Problems with the sound button and the wireless button

    I have a computer laptop dv6-2155dx, and he has a problem with the sound, the button bar button and the wireless button, all of them continue to work, I do not know if I made a mistake and let them turn off or there is another way to get available.

    I need some advice.

    Hello

    Do a hard reset:

    1 disconnect all devices and remove all USB devices and multimedia cards.

    2 disconnect the power adapter, remove the battery and then press in and hold the button for at least 1 minute.

    3 reconnect the power adapter (do not connect the battery), press the power button

    Verification is your problem is resolved or not.

Maybe you are looking for