problem with the client installation, P6

Similar Questions

• Message 'there is a problem with the Windows Installer package

  I have Vista 64-bit Service pack 2

  On my computer HP ProtectSmart Hard Drive Protection has stopped working... .it shows such as the disabled and 'activate' is grey.

  I went to HP to download the new version.  It downloaded, but then to install I got the following message:

  "There is a problem with the Windows Installer Package.  A program run as part of the Setup did not finish as expected.  Contact your supplier of staff or the package of support ".

  How can I fix?

  Please help pleas...

  Thank you

  "C:\Windows\system32\msiexec.exe'-I 'C:\Users\David Candy\AppData\Local\Temp\IPDT_Install.msi '.

  Is the command line to install a particular product. Use the Task Manager to find your command line.

  Then change to add logging.

  "C:\Windows\system32\msiexec.exe" - working '% userprofile%\desktop\install.log'-I 'C:\Users\David Candy\AppData\Local\Temp\IPDT_Install.msi '.

  FixIt

  Microsoft has a range of automatic programs to solve common problems. To see Windows Installer problems

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  
  --

• Problem with the new installation of Windows XP on the Satellite A100-259

  Hi all!

  I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
  I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

  I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
  I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

  (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
  (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
  (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
  (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

  Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

  Hello

  Seems that there are some problems with the standards of the partitions.
  A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
  It was very strange

  Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
  We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.

• installation of upgrade to itunes says error: problem with the Windows Installer Package

  Hi, I'm unable to load the latest version of itunes, the error message says that there is a problem with the installation of window and the staff package to contact technical support or the vendor of the package. Can offer you any advice? Thank you

  Download, install and run the Windows Installer Cleanup utility: http://www.softpedia.com/progDownload/Windows-Installer-CleanUp-Utility-Download-18442.html and see if that helps.

  If not, please check iTunes for technical assistance to the: http://www.apple.com/support/itunes/ or repost in iTunes Forum at:http://discussions.apple.com/category.jspa?categoryID=149.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Get error 1723 - there is a problem with the Windows Installer package

  Hi, I have problems with the .msi files. An example of this would be logmein hamachi. It would be me with error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your provider to support personal or package. What should I do? I am currently using windows 8 pro with media Center. my windows installer is the installation of Windows® program. V 5.0.9200.16384. Thank you

  I had the same problem. The solution is to go into c:\users\"username"\AppData\Local\ and then right click on 'temp' and choose 'properies. Choose 'security'--> edit--> add and add the user name, you use and you give all the rights. After that, it will work :)

  Good luck!

• Hi you have a problem with the final installation with adobe elements first 13

  you have a pc windows 7 home premium 64-bit OS 6 GB of Ram

  an error message appears that says

  exit code 7

  the final installation stops at 2% and then I get this message

  I think I need to download the 64-bit software

  Help, please

  Exit code: 6, Exit Code: 7 Installation errors.

  http://helpx.Adobe.com/Creative-Suite/KB/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6-

  http://helpx.Adobe.com/Creative-Suite/KB/troubleshoot-install-logs-CS5-CS5.html

  For more information on how to review your Setup logs

• KB952287 is a problem with the module installer and will not install, error code 800706BE

  Hi, I have a laptop Dell Inspiron 1520 with Vista Home Premium. I'm having problems installing SP1 and have identified that one KB952287 that causes the problem. The update causes exactly the same problem. While installing the update, an error message appears that says "Module of Windows Installer has stopped working and needs to close", then the updater freezes and never completed the update. The update log provides the following information.
  
  Fix for Windows (KB952287-french)

  Installation date:? 03 /? 04 /? 2009 20:06

  Installation status: failed

  Error details: Code 800706BE

  Update type: Important

  Difficulty for KB952287

  More information:
  http://support.microsoft.com/?kbid=952287 .

  I've contacted Microsoft Support on this issue and they could not help but suggest to post here.

  Thanks in advance for any help.

  If you don't want to go in this direction, you should call dell and ask for a replacement recovery media.

  And maybe ask a copy directly from the operating system without any OEM software or all the changed settings. (a copy of the DVD retail)
  See you soon

  Today, it was a good day, I didn't have to use my AK.

• Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

  Hello

  First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

  So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

  In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

  -Device type Other devices

  Reference of the manufacturer- Unknown

                       Location     -         Bus PCI 3, device 1, function 3

  
  

  Under device status, it says the following:

                         The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information

  To find a driver for this device, click Update driver.

  Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

  list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

  I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

  computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

  the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

  He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

  I could really use some help here.    Any ideas or help would be greatly appreciated.

  Thank you

  Bryan Ray (Richmond, WILL)

  BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

  Thanks Steve!

  Roger

• problems with the final installation of windows 7

  I have a HP Compaq dc7700 Small Form Factor, which works on XP. Recently I decided to upgrade to Windows 7 Ultimate edition and started the installation but to halfway through the process, there was a blackout and restart, the computer boots from the installed windows 7 but because the installation is incomplete, the computer gives this message

  "The computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows click on 'OK' to restart the computer, and then restart the installation.

  The problem is same when I try to boot from the disk or Flash DRIVE, the computer always boots from the hard drive and ends with the same error.  How can I restart the installation? I tried to boot with the Windows XP drive and another drive in Windows 7, but the problem persists

  Hello

  How do you change the boot order?

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  And use the Start Menu button:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  • Restart the computer and continue to touch the F button (see screenshot below) Manager to open the screen Menu starting for the brand and the model of your motherboard or your computer until it does.
    • 

  See you soon.

• Problem with the Windows Installer Cleanup utility

  I'm having a problem installing of a particular program, and told me to run the Windows Installer Cleanup utility.

  I downloaded msicuu2.exe and when I ran, got a Windows Script Host window:

  Script: C:\Users\AppData\Local\Temp\IXP000. TMP\StartMsi.vbs
  Online: 17
  Char: 1
  Error: Permission denied
  Code: 800A 0046
  Source: Microsoft VBScript runtime error

  What that tells me, and what I (think I) do?

  Hi Ernest,

  Try to run the Windows Installer Cleanup utility as administrator and check if that helps.

  To run as administrator

  1. right click on the .exe file

  2. Select run as administrator

  Check if it works fine without any error message.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with the ad installation Apps store...

  I just got a 635 Lumia. It is not a sim card, but it's ti connected wifi.

  the problem im having is with the download of applications out of the store. He downloaded hot music very well but I can't install any text such as TextMe or TextNow app.

  He said "there is a problem in completing your application. Try again later. Inquiring minds may find this useful error: 80070020

  If someone could give me some feedback or help, it would be greatly appreciated!

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are unable to install apps from the store.

  I first suggest you to check the configuration of the date on your phone.

  I suggest for the link and reset the soft and check if that helps.

  http://www.windowsphone.com/en-us/how-to/wp8/phones-and-hardware/restart-my-phone

  -Go to settings - Date + time and manually configure / auto stop

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Problems with the re-installation of CS5.5 Design Premium

  I bought a 'student and Teacher Edition' of the CS5.5 Design Premium in 2012. It was installed in my iMac and the software worked perfectly. Unfortunately, a few weeks ago, my iMac crashed disk and must be replaced. When I get back the iMac recently, I reinstalled my software including the CS5.5. The resettlement process went fine at first until the bar of 93% when there is a message that tells me to disable the application "SafariNotificat". I have no idea what it was. After looking through all the applications, I could not find this application 'SafariNotificat', I canceled the installation process. Apparently, all applications to the Conference on disarmament were installed successfully, with the exception of the Adobe Acrobat X Pro. When I tried to reinstall my CD. I received the error message "Exit Code: 7 - Summary - 1 fatal Error (s), 2 error (s), 0 warning (s) ERROR: DW020: found payload conflicts and mistakes: ERROR: DW020:-Adobe Flash CS5.5 depends on Flash Player must be installed." FATAL: DW020: conflicts were found in the selected payloads. Stop the installation. -----------". This happens even when I installed using the downloaded program from Adobe. Can someone advise me on this? How can I get my Adobe Acrobat X Pro re-installed? Thank you.

  Errors ' Exit Code: 6, "" Exit Code: 7 "|"» CS5, CS5.5

  Mylenium

• Problems with the new installation of Windows 7 Enterprise 64 on T400

  I'm trying to do a clean install on win7 64 on my t400 (2764-CTO) ent

  I burned my drive to a .iso directly from my microsoft partner portal.  When I boot the disk, it starts and starts to copy the files.  After that, I get a small windows with a black background splash screen.  After that, all I get is a mouse with a black background.  I can move the mouse, but my Setup seems to stop there.  I do not see the occasional hard disk activity, but I can get out my drive and have no complaints, so it seems to stop the disc at this point.

  I tried to create a new cd and I have the same problem.  If I run the disk then that in my current configuration of windows, he opens the settings and will begin the upgrade to win7.  I quit because I want a clean install.

  has anyone experience this problem?

  I have re-uploaded the file image .iso last night and will try to burn a new disc from tonight and see where I get with it.  If this does not work, I will try to boot from usb, but I really prefer to do just from a dvd.  also, I tried - r and + r media with the same results.

  Thanks for any help,

  Josh

  vedman wrote:

  I burned my drive to a .iso directly from my microsoft partner portal.

  You validate the checksum on the download of the image?  I seem to have a problem any image on your DVD.

  See you soon,.

  Bill

• Updating to iTunes, I received the message "There is a problem with the Windows Installer Package." How can I fix it?

  He goes on to say "a program required for this install to complete could not be run." Contact your supplier of staff or the package of support ".

  Hello

  The following article might be useful.

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651/

• Problem with the Package Windows Installer... when trying to install ITUNES 9.2 and Quicktime.

  I bought an IPHONE 4 yesterday.  For more than 7 hours, I tried everything to download ITUNES 9.2.  I get the same error.  I spoke with apple as Microsoft.  I didn't PAY to get assistance from Microsoft yet and I hope I don't have to.

  Error: problem with the Windows Installer Package.  A program required for this install to complete could not be run.  Contact your provider to support personal or package.

  I have Windows XP.  I uninstalled and re-installed Safari and which did not help (at one point, I had problems with Safari).  I also have at one point received an alert on 'applesync.notifier' could not be executed.

  I have no idea where from here, but I'm frustrated.  I want to use my phone for something more than "just a phone" and I can't.  I have to carry my OLD Iphone (1st generation original).  Help<><>

  There is a simple way to do it!

  I had this problem too, but I did

  first open Installer u then let it install

  When you get the messege, click ok and it will say restoration of action but don't get put off by this cause after 5 min, it will say: it is installed and restart your computer

  hope this has helped