Problem with the combination of LabVIEW (dynamic distribution) classes, statechart module and module FPGA
LOCATION:
-I am developing a software plugin based on plug-ins based on LabVIEW classes that are instantiated in running. Plugin real classes come from the plug in generic classes that define interfaces to the VI instantiation and can provide basic functionality. This means that many of the methods of the class are dynamic distribution and even methods of child classes can call the parent method.
-Plugins top level (the ones directly accessible by the main VI) each have a run method that animates a plug-in specific state transitions.
-Transitions of the plug-in data acquisition (DAQ class) class calls a method of the DAQ class that reads data from an FPGA card OR and transmits to another component via a queue.
PROBLEM:
-Higher sampling rate, a FPGA-to-host FIFO overflow occurs after some time. When I "weigh" the system just by moving a window of Firefox browser on the screen, the overflow is triggered immediately. I did not have this kind of problem in older software, where I was also reading a FIFO of FPGA, but made no use of LabVIEW classes or diagrams.
SOLUTIONS I'VE TRIED (WITHOUT SUCCESS):
-J' put the transitions in a timed (instead of a simple while loop) loop that I assigned specifically to an own kernel (I have a quad-core processor), while I left all the other loops of my app (there many of them) in any simple loops. FIFO overflow still occurs, however.
QUESTION:
-Does anyone have a tip how I could fix this problem? What could be the cause: dynamic distribution methods, the acquisition of data of state transitions or just the fact that I have a large number of loops? However, I cannot change the fact that I have dynamic distribution methods because it is the essence of my architecture...
Tips are greatly appreciated!
I've now changed the execution priority of all the screws involved in reading of the FPGA FIFO '(highest) priority critical time '. This seems to be improving the situation much: so far I have not a FIFO overflow, even when I move around the windows on the screen. I hope it stays like that...
Tags: NI Software
Similar Questions
-
I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)They all install properly but switches back to windows update to install. It's some kind of loop.
Hi billy73,
In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.
I hope this helps!
-
Problems with the resource of labview execution 2 visa
I use two loops in a labview code all-in - connects to a motor controller and other is used to connect to a multimeter agilent. As soon as I run this VI, the loop to connect to the controller stop working and only used to configure agilent machine works. If I remove the second loop (connecting to the computer of agilent), the code works fine. I guess it's a problem with the execution priority. Could you please review the attached code and let me know any problems with it.
COM1 and Com3 share an interruption.
Go to the BIOS of the computer and set the port to Com3 to the Com2 port, then they will be on their own interrupt and see if that helps.
FYI
COM1 and Com3 share IRQ3
COM2 and Com4 share IRQ4
-
Having problems with the help of web camera program does not work when I click it. don't know what to do. Please help thanks.
Hello
Right click on the shortcut tab icon - properties - look on the target line to see where and what type of program
is supposed to work.You will probably need to reload the drivers of the device and any camera control software.
Login as an administrator.
Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
will update the driver stack.Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
software (if not more recent get the same).Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlThen let windows updates on however prevent loading of drivers who are often older than the
those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
problem with the tutorial: creating a dynamic playlist for streaming flash video
Hi, someone tried the tutorial: creating a dynamic playlist for streaming flash video?
I followed the instructions exactly as stated in the tutorial and test the fla file, it worked perfectly, when I open the swf file using macromedia flash 8. All looks good. Nothing has changed except that the url is replaced by 'rtmp://localhost/videosource' in the xml file.
After I publish the file by using the parameter: network access only, I try to open the file swf and html file, the thumbnail does not appear and there is no way I can click on videos. What I see is that the list, and there is no answer the flash media server 2. All files in the same folder. Someone please help with this problem? Thank you.. .i debug movie step by step
and realized that the xml file is read by the code...Your initial problem said it worked but not playing outside of the
Flash authoring environment simply load the SWF from the hard drive.The Flash programming environment is an environment of confidence and so you really
need to test what a swf loading in the mode of deployment since the
hard drive is not a valid deployment, unless a Flash player installed is
available outside the web browser that you would like you have the
Authoring tool and your users will not.Use a browser with http://yourdomain.com/yourmovie.html to make final
debugging.In this regard, you will need to debug movie when running in real time
mode in a web browser with http:// A technical track, I suggested is of
create a temporary TextField might be named out_txt and send the trace message to
It's like out_txt.text += 'my Expression of Trace ".--
LON Hosford
www.lonhosford.com
Number of happy bits exempts your way!
"free23"wrote in message
News:e4a37a$AK5$1@forums. Macromedia.com...
Sorry but I don't understand what you mean... to debug the movie step by step
and realized that the xml file is read by the code...
It is a sample of my log files:
#Fields: date time x - pid registered x x - ctx x-comment
2006-05-15 20:08:58 3072 unloaded application instance (i) 2651170
VideoSource/_definst_-
2006-05-15 20:48:19 3848 (s) FCApplication 2641173 successfully loaded.
2006-05-15 20:48:19 3848 (s) 2641173 Communication Executive
successfully.
2006-05-15 20:48:19 3848 (s) SimpleConnect 2641173 successfully loaded. -
2006-05-15 20:48:19 3848 (s) successfully loaded 2641173 videoconference. -
2006-05-15 20:48:19 3848 (s) 2641173 Video Playback loaded successfully. -
2006-05-15 20:48:19 law enforcement components of Communication 3848 (s) 2641173
successfully.
2006-05-15 20:48:19 3848 (s) 2641173 sends this message: Hello! You are
logged in as: not defined.
2006-05-15 20:48:19 3848 (e) 2641190 error: msg sent to the client command
connection has been accepted. -
2006-05-15 20:48:20 3848 (s) 2641173 sends this message: Hello! You are
logged in as: not defined.
2006-05-15 20:48:20 3848 (e) 2641190 error: msg sent to the client command
connection has been accepted. -
2006-05-15 20:48:20 3848 (s) 2641173 sends this message: Hello! You are
logged in as: not defined.
2006-05-15 20:48:20 3848 (e) 2641190 error: msg sent to the client command
connection has been accepted. -
2006-05-15 20:48:20 3848 (s) 2641173 sends this message: Hello! You are
logged in as: not defined.
2006-05-15 20:48:20 3848 (e) 2641190 error: msg sent to the client command
connection has been accepted. -
2006-05-15 20:48:20 3848 (s) 2641173 sends this message: Hello! You are
logged in as: not defined.
2006-05-15 20:48:20 3848 (e) 2641190 error: msg sent to the client command
connection has been accepted. -
2006-05-15 20:49:42 3848 (s) 2641173 sends this message: Hello! You are
logged in as: false. -
Problems with the Vector container flash.geometry.Points class
to import flash.geom.Point;
Hello!
I'm writing a game using the new Vector class. Then vector consist of flash.geom.Point (s).
However, when I try to use the concat function to return another vector with a series of Points at the end of the vector, I'll get:
TypeError: Error #1034: Type coercion failed: cannot convert flash.geom::Point@bce8901 to __AS3__.vec. Vector. <>*.
to the vector. <>* $/ castToThisType()
Action script says I'm trying to convert a vector to a vector. I don't see how this is the case.
In the example below, I said adjoiningPoints be:
var adjoiningPoints:Vector. < Item >;When I call
Path.Concat (myNextPoint);
I get the above error. To remedy the problem, added the extra lines, declaring "iAPath." When I work with berries, everything works fine. The sets are completely filled with points and there is no error.Can anyone help
public void getConnectingPath (pArray:Array): vector. < Point >
This function returns a vector of points which consist of the vertices of a path that will be
Plug the current "PollyG", in another array of cancers (Philippe), using the shortest path.
{
var path: vector. < Item >;
var adjoiningPoints:Vector. < Item >;
var wPath:Vector. < Item >;
var pathsCue: as = new que();
var endFound:Boolean = false;
var aPath:Array
path = new Vector. < Point > ();
aPath = new Array();
aPath.unshift (pathList [pathList.length - 1]);
Path.unshift (pathList [pathList.length - 1]) ;// add the starting point;
adjoiningPoints = getConnectingVertexes (Philippe, pathList [pathList.length - 1]);
for (var i = adjoiningPoints.length - 1; i > = 0; i--)
{
var iPath:Vector. < Item >; individual path.
var iAPath:Array
var myNextPoint:Point;
myNextPoint = adjoiningPoints [i];
iAPath = aPath.concat (myNextPoint);
Path.Concat (myNextPoint);
iPath = path.concat (myNextPoint);
pathsCue.addItem (iPath);
}
}Thank you
You cannot use concat with other types of data. That's what indicates the error. myNextPoint is the Point and concat() expects array (vector).
While the docs of vector is not an example, Array is managed in the same way, so this is where they show how to use concat() for table:
http://www.Adobe.com/LiveDocs/Flash/9.0/ActionScriptLangRefV3/array.html#concat ()
-
Problem with the archive log when you use RMAN for backup and restore (11g 2)
Hello world
Please help me solve this problem.
I'm just beginner in Oracle Database (11 g 2). Today, I had a problem, I tried to back up and restore my db by RMAN. I delete all the files in /u01/app/oracle/oradata/orcl / * , then I restore them easily, but the point is I have a table, I can restore Hungarian, but cannot restore anything ranks in it (something wrong with step restore database). I'll tell the detail below.
-First, I create a 'Day' with command table create table hr.day (varchar (20)) day. Then I backup complete by this:run{
allocate channel bkp device type DISK FORMAT '/u01/backup/DB_FULL_%d_%T_s%s_p%p' ;
backup as compressed backupset incremental level 0 tag 'DB_FULL' database include current controlfile;
backup as compressed backupset tag 'ARCL_BKP_FULL' archivelog all delete input;
crosscheck archivelog all;
crosscheck backup;
delete noprompt obsolete;
release channel bkp;
}
D ' other hand, I have insert 'Monday' to table. then do an incremental backup by this:run{
allocate channel bkp device type DISK FORMAT '/u01/backup/DB_INC_%d_%T_s%s_p%p' ;
backup as compressed backupset incremental level 1 tag 'DB_INC' database include current controlfile;
backup as compressed backupset tag 'ARCL_BKP_INC' archivelog all delete input;
crosscheck archivelog all;
crosscheck backup;
delete noprompt obsolete;
release channel bkp;
}Repeat 7 times (Monday-> Saturday). And I got these files:
[oracle@rac ~]$ ls -l /u01/backup/
total 400280
-rw-r----- 1 oracle oinstall 10158080 Jan 20 07:23 c-1428943247-20160120-01
-rw-r----- 1 oracle oinstall 10158080 Jan 20 08:04 c-1428943247-20160120-02
-rw-r----- 1 oracle oinstall 10158080 Jan 20 08:05 c-1428943247-20160120-03
-rw-r----- 1 oracle oinstall 10158080 Jan 20 08:06 c-1428943247-20160120-04
-rw-r----- 1 oracle oinstall 10158080 Jan 20 08:08 c-1428943247-20160120-05
-rw-r----- 1 oracle oinstall 10158080 Jan 20 08:08 c-1428943247-20160120-06
-rw-r----- 1 oracle oinstall 10158080 Jan 20 08:09 c-1428943247-20160120-07
-rw-r----- 1 oracle oinstall 10158080 Jan 20 08:32 c-1428943247-20160120-08
-rw-r----- 1 oracle oinstall 296337408 Jan 20 07:23 DB_FULL_ORCL_20160120_s89_p1
-rw-r----- 1 oracle oinstall 1130496 Jan 20 07:23 DB_FULL_ORCL_20160120_s90_p1
-rw-r----- 1 oracle oinstall 2266624 Jan 20 07:23 DB_FULL_ORCL_20160120_s91_p1
-rw-r----- 1 oracle oinstall 4073984 Jan 20 07:23 DB_FULL_ORCL_20160120_s92_p1
-rw-r----- 1 oracle oinstall 11201536 Jan 20 07:23 DB_FULL_ORCL_20160120_s93_p1
-rw-r----- 1 oracle oinstall 1130496 Jan 20 08:05 DB_INC_ORCL_20160120_s100_p1
-rw-r----- 1 oracle oinstall 146944 Jan 20 08:05 DB_INC_ORCL_20160120_s101_p1
-rw-r----- 1 oracle oinstall 884736 Jan 20 08:06 DB_INC_ORCL_20160120_s103_p1
-rw-r----- 1 oracle oinstall 1130496 Jan 20 08:06 DB_INC_ORCL_20160120_s104_p1
-rw-r----- 1 oracle oinstall 82432 Jan 20 08:06 DB_INC_ORCL_20160120_s105_p1
-rw-r----- 1 oracle oinstall 294912 Jan 20 08:07 DB_INC_ORCL_20160120_s107_p1
-rw-r----- 1 oracle oinstall 1130496 Jan 20 08:07 DB_INC_ORCL_20160120_s108_p1
-rw-r----- 1 oracle oinstall 18944 Jan 20 08:08 DB_INC_ORCL_20160120_s109_p1
-rw-r----- 1 oracle oinstall 155648 Jan 20 08:08 DB_INC_ORCL_20160120_s111_p1
-rw-r----- 1 oracle oinstall 1130496 Jan 20 08:08 DB_INC_ORCL_20160120_s112_p1
-rw-r----- 1 oracle oinstall 131584 Jan 20 08:08 DB_INC_ORCL_20160120_s113_p1
-rw-r----- 1 oracle oinstall 647168 Jan 20 08:09 DB_INC_ORCL_20160120_s115_p1
-rw-r----- 1 oracle oinstall 1130496 Jan 20 08:09 DB_INC_ORCL_20160120_s116_p1
-rw-r----- 1 oracle oinstall 8704 Jan 20 08:09 DB_INC_ORCL_20160120_s117_p1
-rw-r----- 1 oracle oinstall 2203648 Jan 20 08:04 DB_INC_ORCL_20160120_s95_p1
-rw-r----- 1 oracle oinstall 1130496 Jan 20 08:04 DB_INC_ORCL_20160120_s96_p1
-rw-r----- 1 oracle oinstall 1899008 Jan 20 08:04 DB_INC_ORCL_20160120_s97_p1
-rw-r----- 1 oracle oinstall 327680 Jan 20 08:05 DB_INC_ORCL_20160120_s99_p1And
RMAN> list backup summary;
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
------- -- -- - ----------- --------------- ------- ------- ---------- ---
80 B 0 A DISK 20-JAN-16 1 1 YES DB_FULL
81 B 0 A DISK 20-JAN-16 1 1 YES DB_FULL
82 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_FULL
83 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_FULL
84 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_FULL
85 B F A DISK 20-JAN-16 1 1 NO TAG20160120T072332
86 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
87 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
88 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_INC
89 B F A DISK 20-JAN-16 1 1 NO TAG20160120T080440
90 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
91 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
92 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_INC
93 B F A DISK 20-JAN-16 1 1 NO TAG20160120T080545
94 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
95 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
96 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_INC
97 B F A DISK 20-JAN-16 1 1 NO TAG20160120T080657
98 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
99 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
100 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_INC
101 B F A DISK 20-JAN-16 1 1 NO TAG20160120T080801
102 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
103 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
104 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_INC
105 B F A DISK 20-JAN-16 1 1 NO TAG20160120T080844
106 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
107 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
108 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_INCMy configuration of rman:
RMAN> show all;
RMAN configuration parameters for database with db_unique_name ORCL are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u01/backup/%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 2 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/u01/backup/backup_df%t_s%s_s%p';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE COMPRESSION ALGORITHM 'BASIC' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE ; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/11.2.0/dbhome/dbs/snapcf_orcl.f'; # default- Thirdly, i removed all file in /u01/app/oracle/oradata/orcl/*. then restore control file from the newest backup control file (saturday backup) + restore database. Seem nothing's wrong here.
RMAN> restore controlfile from '/u01/backup/c-1428943247-20160120-08';
Starting restore at 20-JAN-16
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=18 device type=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: SID=20 device type=DISK
channel ORA_DISK_2: skipped, AUTOBACKUP already found
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:09
output file name=/u01/app/oracle/oradata/orcl/control01.ctl
output file name=/u01/app/oracle/flash_recovery_area/orcl/control02.ctl
Finished restore at 20-JAN-16
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
released channel: ORA_DISK_2
RMAN> restore database;
Starting restore at 20-JAN-16
Starting implicit crosscheck backup at 20-JAN-16
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=20 device type=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: SID=18 device type=DISK
Crosschecked 29 objects
Finished implicit crosscheck backup at 20-JAN-16
Starting implicit crosscheck copy at 20-JAN-16
using channel ORA_DISK_1
using channel ORA_DISK_2
Finished implicit crosscheck copy at 20-JAN-16
searching for all files in the recovery area
cataloging files...
no files cataloged
using channel ORA_DISK_1
using channel ORA_DISK_2
channel ORA_DISK_1: starting datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_DISK_1: restoring datafile 00001 to /u01/app/oracle/oradata/orcl/system01.dbf
channel ORA_DISK_1: restoring datafile 00002 to /u01/app/oracle/oradata/orcl/sysaux01.dbf
channel ORA_DISK_1: restoring datafile 00003 to /u01/app/oracle/oradata/orcl/undotbs01.dbf
channel ORA_DISK_1: restoring datafile 00004 to /u01/app/oracle/oradata/orcl/users01.dbf
channel ORA_DISK_1: restoring datafile 00005 to /u01/app/oracle/oradata/orcl/example01.dbf
channel ORA_DISK_1: reading from backup piece /u01/backup/DB_FULL_ORCL_20160120_s89_p1
channel ORA_DISK_1: piece handle=/u01/backup/DB_FULL_ORCL_20160120_s89_p1 tag=DB_FULL
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:01:15
Finished restore at 20-JAN-16-Fourth, the problem here, I got the database;
.. .every oky until this line...starting media recovery
channel ORA_DISK_1: starting archived log restore to default destination
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=15
channel ORA_DISK_1: reading from backup piece /u01/backup/DB_INC_ORCL_20160120_s117_p1
channel ORA_DISK_1: piece handle=/u01/backup/DB_INC_ORCL_20160120_s117_p1 tag=ARCL_BKP_INC
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:00:01
archived log file name=/u01/app/oracle/flash_recovery_area/ORCL/archivelog/2016_01_20/o1_mf_1_15_c9xsyx9k_.arc thread=1 sequence=15
unable to find archived log
archived log thread=1 sequence=1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 01/20/2016 08:50:22RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 1 and starting SCN of 1205841
The error said that it is impossible to find the archived log thread = 1 sequence = 1. Then I check it with this command always there (oh, I'm wrong?)RMAN> list backup of archivelog all;
List of Backup Sets
===================
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
82 2.16M DISK 00:00:00 20-JAN-16
BP Key: 82 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_FULL
Piece Name: /u01/backup/DB_FULL_ORCL_20160120_s91_p1
List of Archived Logs in backup set 82
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 1 1154833 20-JAN-16 1177422 20-JAN-16
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
83 3.88M DISK 00:00:00 20-JAN-16
BP Key: 83 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_FULL
Piece Name: /u01/backup/DB_FULL_ORCL_20160120_s92_p1
List of Archived Logs in backup set 83
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 1 1162729 20-JAN-16 1188784 20-JAN-16
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
84 10.68M DISK 00:00:01 20-JAN-16
BP Key: 84 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_FULL
Piece Name: /u01/backup/DB_FULL_ORCL_20160120_s93_p1
List of Archived Logs in backup set 84
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 2 1177422 20-JAN-16 1201833 20-JAN-16
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
88 1.81M DISK 00:00:01 20-JAN-16
BP Key: 88 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_INC
Piece Name: /u01/backup/DB_INC_ORCL_20160120_s97_p1
List of Archived Logs in backup set 88
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 3 1201833 20-JAN-16 1204844 20-JAN-16
1 4 1204844 20-JAN-16 1204893 20-JAN-16
1 5 1204893 20-JAN-16 1204958 20-JAN-16
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
92 143.00K DISK 00:00:00 20-JAN-16
BP Key: 92 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_INC
Piece Name: /u01/backup/DB_INC_ORCL_20160120_s101_p1
List of Archived Logs in backup set 92
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 6 1204958 20-JAN-16 1205034 20-JAN-16
1 7 1205034 20-JAN-16 1205253 20-JAN-16
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
96 80.00K DISK 00:00:00 20-JAN-16
BP Key: 96 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_INC
Piece Name: /u01/backup/DB_INC_ORCL_20160120_s105_p1
List of Archived Logs in backup set 96
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 8 1205253 20-JAN-16 1205354 20-JAN-16
1 9 1205354 20-JAN-16 1205433 20-JAN-16
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
100 18.00K DISK 00:00:00 20-JAN-16
BP Key: 100 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_INC
Piece Name: /u01/backup/DB_INC_ORCL_20160120_s109_p1
List of Archived Logs in backup set 100
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 10 1205433 20-JAN-16 1205519 20-JAN-16
1 11 1205519 20-JAN-16 1205559 20-JAN-16
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
104 128.00K DISK 00:00:00 20-JAN-16
BP Key: 104 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_INC
Piece Name: /u01/backup/DB_INC_ORCL_20160120_s113_p1
List of Archived Logs in backup set 104
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 12 1205559 20-JAN-16 1205624 20-JAN-16
1 13 1205624 20-JAN-16 1205739 20-JAN-16
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
108 8.00K DISK 00:00:00 20-JAN-16
BP Key: 108 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_INC
Piece Name: /u01/backup/DB_INC_ORCL_20160120_s117_p1
List of Archived Logs in backup set 108
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 14 1205739 20-JAN-16 1205796 20-JAN-16
1 15 1205796 20-JAN-16 1205840 20-JAN-16
If i ignore it and open the database, just my table in full backup come back but rows was not restored. I'm sure the problem is my archive log backup but i don't know how to solve it. Plz help me.Sorry for a long post.
> 1 and from the 1205841 SNA sequence
The SCN that indicates Oracle is above the range of SNA that you have in the ArchiveLog backups for sequence 1 to 15 (15 sequence ends at 1205840).
The message
channel ORA_DISK_1: restoring archives Journal
Archives journal thread = 1 sequence = 15
channel ORA_DISK_1: backup/u01/backup/DB_INC_ORCL_20160120_s117_p1 piece reading
channel ORA_DISK_1: piece handle = / u01/backup/DB_INC_ORCL_20160120_s117_p1 tag = ARCL_BKP_INC
indicates that he has restored the sequence up to 15
You can check the log file alert database instance for messages on the fact of recovery.
He is now asking sequence #1 it seems you did a RESETLOGS after sequence #15.
Note: If you have NOT issued a COMMIT after the line is INSERTED in the table 'Day', the recovery of the database will have no * transactions * to retrieve. An uncomitted transaction is cancelled.
Hemant K Collette
-
I have problems with the connection to a drive of my Macbook Pro and Tolino
When I connect my player Tolino (ebooks) with my Macbook Pro it does appear for a few seconds, and then the connection went?
Taken Tolino supported by Mac OS X?
-
Firefox and serious problems with the police on the websites bloglike.
Firefox on my computer has some serious problems with the police on some sites, such as: twitter, tumblr and a few other bloglike.
Images:
Twetter / thumblr / otherYes, it is more likely a hardware acceleration problem or a problem with the specific fonts (rendering).
You can do a test of fonts to see if you can identify the corrupted fonts.
You can use this extension to see what fonts are used for the selected text.
-
Problem with the HP Pavilion dv5-1015ea
Someone had problems with the dv5-1015ea model? I recently had an and it seems to make a humming/rattling noise (but this is not the fan) especially when your running a program or on the internet? Any comments will be useful
Maybe it's just the hard drive.
-
Problem with the volume on Satellite Z30 control - A
Hello
I have a problem with the analog output sound on my A - Z30 (internal and line/headphone speakers). If for example I play music I see a clearly weak signal volume on the fader control of volume in my Win 8.1 source volume control. But on the master fader, I get a completely saturated and distorted signal. Even down to the time source and output does not help... it just sounds horrible.
See: link: [https://dl.dropboxusercontent.com/u/30325547/SoundProblem.jpg] (sorry, it's a German system)
Here we can see that the (extreme right) music player delivers a signal of low volume, while the master fader (left) receives a 100% volume distorted signal.
If I use external speakers that connect via USB (Logitech Z305) it works perfectly.
I have already uninstalled and reinstalled the latest version of the drivers for my sound card. But this problem is very persistent. It seems that something pulls the signal up, but I can't find any control that turns off.
I'm not completely sure when that started, but it can be connected with the beginning of the use of a USB headset. But I already uninstalled this software once again, but that did not help as well.
Any idea?
Thank you very much
PHILIPPE
Hello
According to the specifications of the laptop and drivers available on the Toshiba driver page, this laptop supports the Realtek sound card.
That's why the Realtek HD audio Manager software should be available in the control panel.Realtek HD audio Manager provides different parameters as well as the speaker of the configuration options to get the best sound performance.
In addition, computers laptop Toshiba are preinstalled with a sound tool DTS/Soft
This software provides audio improvements in your computer.To be honest, I not quite sure what which could affect your sound volume, but the mentioned tools and configuration should be checked permanently m.
-
Problem with the keyboard and audio on Satellite L40
Hello world
I just installed XP SP2 on my Satellite L40 (BTW thanks to all of you who helped me overcome the problems during this operation with your son), but I have a problem with my keyboard. I have a QWERTY keyboard and after I installed xp, he worked as a qwerty, I fixed it, now all my letters are working very well, but I have some problems with certain symbols, such as @,., _, if you understand me.Could someone help me?
I also have problems with my audio, in fact I have no sound at all, in the Panel, he said that there is no audio device found.
I've seen a few threads which said that I should first install kb888111 and another thing is likely, but I can't find the other. I downloaded the audio driver from the toshiba Web site; Thank you for helping me in this area also.Good bye
I have the same problem with the sound... I found hotfix kb888111 and I instaled this one... but when I tried to start installing driver sound a window popup say thet there is an error and cannot continue with the installation driver...
I found hotfix kb888111 in this file that i have downloaded from the toshiba site: english\sound driver\mshdqfe\win2k_xp\us\kb888111xps2...
I don't know what to do... Someone else knows... -
Problem with the installation and activation of Autodesk Autocad 2011
I'm having a problem with the Autodesk Autocad 2011 activation. After I download and install the software, there should I active and a window opens to activation. The problem is the window is empty and I tried closing and reopending the program. I tried to uninstall and reinstall the program several times and get the same result. I checked the site Autodesk solutions and tried what they suggested, but without success. Help, please.
Thank you
Matt
Hello
You can activate AutoCAD, through activation and the recording interface, you can activate your product 24 hours a day, seven days a week, through the Internet or by e-mail. Or the other option takes only a few steps to complete and requires your product serial number and registration information.
http://images.Autodesk.com/ADSK/files/autocad_2011_faq_us.PDF
Also try the suggestion in the given below link and check if this is useful to solve the problem.
http://USA.Autodesk.com/ADSK/servlet/PS/DL/Item?siteID=123112&ID=10244471&LinkId=9240617
http://USA.Autodesk.com/ADSK/servlet/PS/DL/Item?siteID=123112&ID=10243884&LinkId=9240617
If this does not help, you must contact the support of AutoCAD to help you activate the product.
http://USA.Autodesk.com/ADSK/servlet/PS/index?siteid=123112&ID=2714854&LinkId=9240617
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Problems with the resolution of display on Android
We have a problem with the display on our Google Nexus 7 (2013) resolution and our Multi-Folio App. If we keep an article within our published application Multi-Folio, the article does not use the mode full screen of the tablet. But when I look at the article inside the content viewer, use the full screen of the tablet. For your information: we use the 1280 x 800 resolution and the Tablet has the highest resolution of 1920 x 1200.
However, IOS, it works without problem. We use iPad 4 (2048 x 1536) with article 1024 x 720 resolution. Do you have an idea of what we can do? In this post, you will find two screenshots that describe the problem.
For some reason, the content isn't be transposed into the application of multi-folio like that in the v28 content viewer. Have you tried updating your application multi-folio on v28?
-
Problem with the DataExport command
Hello Experts,
Problem with the DataExport command in a calcscript (one's TIME and another is in the output file), tried using different option
DataExportColHeader time; and
DataExportOverwriteFile POWER
(1) the second line in the output displays the month 'SEP', rather like a column. Here's the code used.
(2) for the forecast, you would have several sections as example below
(FcstMo (MS), FcstYr (2009) and AllMonths (JAN-dec), FcstYears (2010,2011,2012)).
How to add in the same file can HOWEVER add us to the same file with multiple queries using DataExport patch, could not find option in the documentation.
Code
------
SET DATAEXPORTOPTIONS
{
WE DataExportDIMHeader;
WE DataExportOverwriteFile;
DataExportDecimal 8;
};
DIFFICULTY (@REMOVE (@RELATIVE("DepartmentID",0), "OR00777"), @RELATIVE ("goods and Services", 0 "),"AC8002602", CActVer, CurYr, 'EOP' & CurMo, @RELATIVE ("industry", 0))
DATAEXPORT 'File' "" "/ opt/tools/arbor/hyperion/AnalyticServices/app/ExportfromMV7.txt";
ENDFIX;
Output file format
----------------------
'Years' 'Versions' 'measures' 'Goods and Services' "DepartmentID" "Business line" 'BalType', 'Time '.
"MS."
'2009' 'ADMIRE' 'AC8002602' 'AC0000157' 'DI17801' 'OR00775' 'EOP' 100.00000000
'2009' 'ADMIRE' 'AC8002602' 'AC0000157' 'DI17801' 'OR00776' 'EOP' 1000.00000000
'2009' 'ADMIRE' 'AC8002602' 'AC0000157' 'DI17801' 'OR81305' 'EOP' 2000.00000000
'2009' 'ADMIRE' 'AC8002602' 'AC0001904' 'DI17801' 'OR00775' 'EOP' 300.00000000
Any help would be a great help.
Thank you
JingleWhat is specified as you column size (should be a dense dimension) will appear in the second row. It shows you what each column of data. Even if you load not relational, you can specify the relational format. There is an interesting bug that has been fixed in 11.1.1.3 If the columns do not data, they have removed from the relational attraction, you can read more about this in my blog http://glennschwartzbergs-essbase-blog.blogspot.com/
Maybe you are looking for
-
Incomplete import of music in iTunes
I just finished all my my CD library import music to iTunes 12.3.2 64-bit on my Macbook Pro. The whole process takes about three days. I was very pleased when he did. all imported and was organized by the artist and the title of the album. Now for t
-
How to use with my Satellite A300 safety lock?
Hello.. I found the manual book of the user of my toshiba and I saw something iteresting. There are "safety lock". I hadn't used before, I want to use now, but I don't have its operation. Can someone tell me more about this? Thanks :)
-
Satellite L300D has decided to go a sort of boot loop
My laptop decided to go sort of boot loop where it load and displays Toshiba screen, you can press F2 (for BIOS) or F12 (for the boot sequence) then shows a screen saying "Windows is loading files...". "with a progress bar and once who reached 100%,
-
I have a ThinkCentre Small Form Factor with an i7 CPU E73 - 4790 s which uses the built in HD 4600 Graphics. I plan on connecting two 2560 * 1440 resolution screens. The problem is that I have only 1 display output port. What is the best way to solve
-
Update error - SQL Server 2008 SP1
Hello I am using Windows 7 Ultimate 64 bit I installed VS2010 Trail, then I installed SQL Server Express Studio My Windows shows update there is a update for SQl Server 2008 Service Pack 1 But when I try to install this update I get an error like bel