problem with the configuration of the channel of width 40 mhz on Aironet 1141

Similar Questions

• Problem with the number of lines in the channel

  Dear community LabView,

  I'm relatively new to labview and I came across a problem that (I assume) can easily be resolved with your help.

  I need to create a digital signal to trigger a camera, but I have a problem with the configuration of my lines or exit lanes. I would not use that line output to trigger the camera. (I use a card NI PCIe-6353). LabVIEW is telling me that the number of lines in the channel does not have the number of rows of data:

  Possible reasons:

  Specified read or write operation failed because the number of rows in the data of a string is not the lines in the channel.

  If you use the digital waveform data type, make sure that the number of lines in the digital waveforms is the number of lines in the channel. If you are using Boolean data, make sure that the dimension of the array for the rows of the data is the number of lines in the channel.

  Number of lines in the channel: 1
  Number of data lines: 2

  Task name: _unnamedTask<11>

  How and why the number of data rows is connected to the resolution of my analog digital converter?

  I would appreciate your help! Labview code and a screenshot attached.

  Thank you

  Beff

  I got it to work by changing the "data format" "binary not signed" OR by plugging is not the "offset" for the Square Wave VI.  I think that the default "offset binary" data format works correctly if there is a negative value.

• Satellite U300-13U - iTunes has detected a problem with the audio configuration

  Please can someone help me? I have a laptop U300-13U and that you have installed iTunes on it. However, when I open iTunes I get an error message saying 'iTunes has detected a problem with the audio configuration and may not play correctly' which is an understatement - it does not at all!

  I uninstalled, reinstalled iTunes and Quicktime, but in vain. I have searched and exhausted the iTunes support boards but have nowhere either. The sound is fine as I can read CDs with no problems at all. The only suggestion I can get is that there may be a problem with the audio device magnet is not Apple and vice versa.

  Does anyone have AN idea at all as to what might be going on here? I'm completely out of my depth, I'm just a simple girl who wants to play his music!

  Thank you so much.

  Hello

  I don t use iTunes so I m not an expert player but first of all, you must give us some important information:
  -What operating system do you use?
  -Are you using the factory settings (Toshiba Recovery disk) or your own version of Windows
  -Do you have the yellow exclamation marks in Device Manager?

  OK, iTunes says that there is an audio configuration problem so do you trying to update the audio driver? If this isn't the case, you should try it.
  See the Web from Toshiba site for an update and see what happens. Then validate your result:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Welcome them

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• There might be a problem with the configuration of your DOMAIN NAME SERVER

  Last week one, I noticed some problems with my internet connection. I have a BSNL broadband connection. I am connected to the internet, and after some time all of a sudden, I'm not able to connect. My modem lights are all on and on my laptop, I see the symbol of 2 computers with a note on it, which means that I'm connected. But still the pages not displayed. When I run Network Diagnostics (I Windown Vista) I get the error message saying: "there could be a problem with the configuration of your DOMAIN NAME server. I turned off the computer and the modem and switch it on after a long time... He would return but loses the connection with the same error message again. What can I do? I tried to reset the modem, also tried the system restore. What can I do? Please help me. I have laptop Dell Insipiron with Windows Vista and I connect wireless.

  We do not know how your system should be set up - including the DNS configuration and settings.  I recommend you contact your ISP's technical support group and get help from them in the configuration of your computer (and test lines and modem - the problem could be the modem and not on the computer or it could even be the service provider itself).  It can be something as simple as a typo or a box checked or not checked - I do not know because I do not know their settings (different for each access provider).  Give them a call.  I do so often when I have connection problems, and they are almost always useful, or schedule a service call if they cannot help.  I think it's your best chance to solve this problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What is the problem with the BizTalk configuration tool?

  I just installed BizTalk Server 2010 (developer edition) and I restarted my computer, but the Configuration tool will not charge. Instead of loading the configuration tool, a dialog box displays saying "another instance of this program is already running" with the title saying "error". I am sure that no other instances of the configuration tool are already running. What's not here? If anyone can help me, that would be greatly appreciated.

  Hi NateKoepke,

   
  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are facing problems with the installation of BizTalk Server 2010. Please correct me that I misunderstood.
   
  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.
  http://social.msdn.Microsoft.com/forums/en-us/biztalkgeneral/threads/

• problem with the configuration of the Windows on Windows 8 updates

  hated, I an asus X553M I think its name everything was fine but but now ever time I'll start up it goes to black screen (lack of configuration of windows, undo changes updates off your computer), then it will reboot, but it just back upward with the failure to set up the screen and it continues to is time and time again iv tried everything I have photos on the laptop that are too important to lose is there a way I could get him...

  Original title: help

  Hello

  Thanks for posting your query in Microsoft Community.

  I suggest you to start from the installation media and then Auto repair and check if it helps.

  Method 1: create installation media.

  Check out the following link to create an installation media for Windows 8.

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  Method 2:

  Step 1: auto repair

  See the next procedure to start on the installation media and auto repair

  1. Insert media such as (DVD or USB key) and press the F12 key and click change default or any other option located at the bottom of the screen.

  2. In the next screen, click on the Troubleshooting option, you WinRE (Windows Recovery Environment) different options to solve the problems with the computer when it is in no State to start is displayed.

  3. Now click on repair automatic, this will open a wizard that automatically diagnose and repair problems with starting the computer.

  Step 2: System Restore

  See the next procedure to start on the installation media and perform the system restore.

  1. Insert media such as (DVD or USB key) and press the F12 key and click change default or any other option located at the bottom of the screen.

  2. In the next screen, click on troubleshooting option, allows you to display different options of WinRE (Windows Recovery Environment) to solve the problems with the computer when it is in no State to start.

  3. Now, click on the system restore, this will open a wizard that automatically diagnose and repair problems with starting the computer.

  Hope this helps, please let us know if you have further questions about Windows.

  Thank you.

• SE "There are problems with the configuration of static files in your environment" after the APEX 5 install using Oracle HTTP Server

  There is not much information in the doc around the new configuration of static file.  Someone at - it an example of this dads.conf he file should look similar to static files?  Everything else seems to work fine - it's my only hang up now.

  Thank you!

  Exact pop-up message:

  There are problems with the configuration of static files in your environment.  Please see the section "Configuration static file Support" in the Guide of the Installation Application Express

  I figured it out on my own - the doc has a section "6.5.4 configuration Support for static file" which basically said yes, it is now supported for static files, then a "see also:" link to the dads.conf section, that I'm not good enough to see there are now 2 new parameters in your dads config file...  All is ready!  It works!  YAY!

• I bought for the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer and restart production

  I bought the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer, and restart the product. Error 213:19 ".

  That was before Adobe moved to a payment structure based on participants. I need to be able to access these programs. Please provide a solution to the problem.

  order to C:\ProgramData\Adobe & C:\ProgramData\Adobe\SLStore folders full reapply administrators property back on the C:\ProgramData folder and then add everyone.

• I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  Please contact the original publisher of the widget.

  Thank you

  Sanjit

• Problems with the configuration of the Essbase Server

  Hi all
  
  -J' have a simple environment with a single Foundation Server with only the Foundation services running on it (only the basic components installed). On the same Essbase server, I installed (by default) foundation and Essbase components.
  -I am facing a problem with the configuration of the Essbase server. All steps complete with the exception of the last step: deploying web applications (APS and EAS) to the WebLogic Server.
  -FYI, I am deploying the web application to the existing domain created on the server of the Foundation. As all products must be on the same domain.
  
  
  During deployment, the WebLogic administration server reports the following error:
  
  BEA-149003
  Cannot access source application information in /opt/shared/apps/hyperion/Oracle/Middleware/EPMSystem11R1/products/Essbase/eas/server/AppServer/InstallableApps/Common/aps.ear for application "APS".
  The specified error is: there is no file of the application.
  
  
  Now the path and the above files exist on the Essbase server, but not on the server of the Foundation. So after playing with the WL administration console and reading of Sandeep post [1], I came to the conclusion that:
  1. the Essabase components must be installed on the Essbase server, but not configured.
  Now, this means that I need to install all the components on the server of the Foundation, even though I only will use to deploy the services of the Foundation which seems a little ridiculous?
  2. create a new domain on the Essbase server, so the EAS/APS will be deployed on the Essbase server - but will not be on the same domain as the other products.
  
  Well, I am a newbie with WebLogic and so would welcome your valuable contributions!
  
  
  Thanks in advance...
  
  
  References:
  [1]. http://sandeepseshan.blogspot.in/2009/02/weblogic-server-10-deployment-error.html

  The configuration documentation.
  "On the computer on which you will administer the WebLogic Server, you must install all of the Web applications for all applications that you plan to deploy on any machine in the environment. (The Administration WebLogic Server is installed and deployed on computer Services Foundation) »

  You should should not create a new domain for deployment on other servers and can use the existing and only to deploy web applications on the servers that you want running on.

  I don't know what version you install, but if it's 11.1.2.1 then consider the OS is similar on both machines
  "All Web applications in a deployment of EPM system must be deployed on windows computers or on all UNIX machines."

  There do not appear to be there in 11.1.2.2 so I guess it isn't the rule more.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• NO - problem with the service

  I am from INDIA.

  I bought an iPhone 6 s new mobile Hong Kong a licensed salesperson (mobile fortress).

  When I bring to the India and put on my country sim (vodafone) to my laptop, everything works, but the network does not connect.

  "In settings > about I see vodafone, but when I see the carrier" is not connected, I tried many solutions online.

  I tried:

  1. all parameters (network... so on) and the software is up to date.

  2 tried selecting the network, but to the carrier, it does not show the available network.

  3. I tried the complete reset of the phone 2-3 times.

  4. I tried to change the apple ID.

  I tried many things, my phone works, but could not solve the network. Cannot make calls or find networks in my I phone.

  Someone can help me. When I went to ask local sales assistance, that's the problem with the change in the country, and they said that it will be free of charge on 18000INR.

  Please someone help me.

  Thanks in advance.

  Hi a.a,.

  Welcome to the communities of Apple Support! I'm sorry to hear that you experience these symptoms with your new iPhone 6 s. I'm a bit ambiguous on your specific configuration or what you see, but you can check that the phone is not locked on the original support (if the phone was sold to any kind of discounts or subsidized rate, it is most likely locked carrier). You can find the information described in the following article useful:

  How to unlock your iPhone for use with another carrier - Apple Support

  You may also be aware that different iPhone models are sold in different regions and countries and can support only specific carriers in these regions, as shown here:

  iPhone - country view with LTE - Apple networks support

  Concerning

• Problem with the volume on Satellite Z30 control - A

  Hello

  I have a problem with the analog output sound on my A - Z30 (internal and line/headphone speakers). If for example I play music I see a clearly weak signal volume on the fader control of volume in my Win 8.1 source volume control. But on the master fader, I get a completely saturated and distorted signal. Even down to the time source and output does not help... it just sounds horrible.

  See: link: [https://dl.dropboxusercontent.com/u/30325547/SoundProblem.jpg] (sorry, it's a German system)

  Here we can see that the (extreme right) music player delivers a signal of low volume, while the master fader (left) receives a 100% volume distorted signal.

  If I use external speakers that connect via USB (Logitech Z305) it works perfectly.

  I have already uninstalled and reinstalled the latest version of the drivers for my sound card. But this problem is very persistent. It seems that something pulls the signal up, but I can't find any control that turns off.

  I'm not completely sure when that started, but it can be connected with the beginning of the use of a USB headset. But I already uninstalled this software once again, but that did not help as well.

  Any idea?

  Thank you very much

  PHILIPPE

  Hello

  According to the specifications of the laptop and drivers available on the Toshiba driver page, this laptop supports the Realtek sound card.
  That's why the Realtek HD audio Manager software should be available in the control panel.

  Realtek HD audio Manager provides different parameters as well as the speaker of the configuration options to get the best sound performance.

  In addition, computers laptop Toshiba are preinstalled with a sound tool DTS/Soft
  This software provides audio improvements in your computer.

  To be honest, I not quite sure what which could affect your sound volume, but the mentioned tools and configuration should be checked permanently m.

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.

• Problem with the D-U-N-S: Urgent

  I am trying to register my organization on an Apple Developer program.

  I got a valid D-U-N-S number sent to me by D & B on 2 February 2016.

  However until now whenever I try to register my business using the D-U-N-S number, I get the following error message:

  «The information you entered does not match your profile in the D & B database.» "Before submitting your information to the Organization, get your D & B profile."

  I watched and the profile exists.

  I sent a query to D & B, but we were told to contact Apple directly.

  We have created a deal on the Apple Support and we ardently and desperately waiting for a response.

  Someone from the community can help me on this issue. Please consider as urgent.

  Hello Nabla_business,

  Desperate? You should be aware that Apple is moving at glacial speed on these issues. On the one hand your number DUNS has been created. You must wait 60 days before attempting to create an account. However, it seems that your information has been through to Apple. You will have to wait for the Apple support to constct you. You may need to make repeated through several channels attempts to attract the attention of Apple.

  I had a similar experience. The problem was that when Apple imported data from Dun & Bradstreet, they completely scrambled my address. But I had no problems creating my account so your questions can be worse.

  And I would warn your words "emergency". Apple has a huge backlog of similar problems. In my case, the only way was able to get my problem resolved was when a Technical Support engineer used Apple Remote to go into my machine and then look at the developers own Apple Site. But I had this problem to be solved. I had many other problems with the tax forms.

  My point is that it can take up to a year, in order to get your developer account fully Setup. I suggest you open an account, personal development and test purposes. Be sure to use IDS bundle dedicated to this purpose. This way, when your business is finally set up, then you will be ready to go and become familiar with the process.