Problem with the disk free space.

I use the power of fire 7100 (the 5.3.0.3 Version of FireSight 5.4.1.7 sensor Version). I have political problems that apply to the device. And is unable to update sensor for the newest version. Cisco support community help me! Thank you! They and I think that this problem can be in the use of the disk.

What I oh sensor:

Size of filesystem used Avail use % mounted on
/ dev/sda5 2.9 G 562 M 2.2 G 21%.
/ dev/sda1 99M 37 M 58M 39% / Boot
/ dev/sda7 67 67 G 0 100% but
No 1.9 G 136 K 1.9 G 1% / dev/shm

May be the problem with the records of Volume.What I could check and delete? Thank you!

Hello team,

* Could you please check the following points: -.

CD/var/tmp /.

du-sh *.

You can clear the/var/tmp/en using the following. Files under/var/tmp temporary files are. :-

rm - rf *.

It is a known bug where the but gets completely due to Apply_ files *.

* Also check the following points: -.

CD/var/sf/updates

Remove the old patches if there are.

* Check the following backup folder and the folder of detection engine too.

CD/var/sf/upgrade_backup

du-sh *.

CD/var/sf/detection_engines

du-sh *.

Rate if this helps you.

Concerning

Jetsy

Tags: Cisco Security

Similar Questions

  • Dual booting - problem with the disk when trying to start windows

    original title: problems with dual boot.  Windows does not play well with others.

    Hello

    I have Windows Vista Home Premium 64-bit included with the computer.  I installed Fedorah and it works on my computer.  When I installed it, but I had my hard drive partion.  I left most of the hard drive (about 400 concerts) as it was, when I booted up Fedorah worked well and gave me the option to boot or windows.  When I started in the window, however, it wouldn't let me start my computer, it says I have a problem with my drive.  With XP, it gives me no problem, I didn't ignore the disk check, but with Vista for some reason it doesn't let me start.  It gives me a few options of restoration to the previous status confuses the computer he says I manually type in which windows in the command line.  I don't have my windows CD, the only other option that I have that seems to work when I click it is restoring to factory fault which I don't want to do because I don't want to lose all my files.  Please tell me what I need to do.

    http://Fedoraforum.org/

    Fedora forums at the link above.

    A refund Stsrtup of Vista Disk link.

    Download the 64-bit on the right.

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    See you soon.

    Mick Murphy - Microsoft partner

  • Problem with the disk check.

    32-bit Vista Home Premium:

    About 6 months ago, I ran a Check Disk from my C drive (using Vista error checking tool) and checked the two boxes before starting (fix Auto file system and search for errors / attempt to recover bad sectors).

    He ran through the 1 5 6 controls without finding an error.

    On the 6th and final verification that it is running, it hung (or the 4th of 5 controls it works - do not remember if it is 5 or 6 it works). According to me, he started the final control, but stopped and none did not move. A few hours later he still hadn't moved, so I did a hard stop.

    Fortunately, everything was fine when I rebooted.

    I use the computer since then without problems/errors obvious hard drive, but I'm afraid to run another check of the disk, even though I would right now.

    Suggestions are welcome as to what might have caused the shot, and if I do another check of the disk.

    Yes, it's essentially the same command.  Personally, I never use the other method - I just use the one that I you provided.

    : You are right about the meaning switches - you already know or you're an awfully good guesser.  Since you have expressed interest, here's more information on CHKDSK you might find of interest with other switches and guidelines and some good information on how it works and how to use the results: http://www.vistax64.com/tutorials/67612-check-disk-chkdsk.html.

    If you cannot complete a cHkdsk on your hard drive, then there is a problem with the player that must be resolved before it is any worse.  I would definitely give it another chance and also run the diagnostics that I recommended in a previous post.

    I hope this helps and I hope that the test completes successfully this time.  If this isn't the case, I hope that the diagnostic test identifies the problem and it can be repaired than replaced (even if it's pretty rare - usually if it goes wrong it must be replaced).  If this is the case, I would as soon as possible to ensure that it is not so bad that you can no longer access the drive at all - but then again, there may be nothing wrong and we could be worrying for nothing but a bad block or two which is nothing to worry about in itself.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Problems with the disk drive - DVD playback

    I have a Windows Vista Ultimate 64 bit PC with a Samsung SH - S223C DVD, player, which both are a little less than two years. Recently, I started having problems mainly watching DVD and also some problems of installation of video games. When you watch DVDs in Windows Media Center or Media Player, the player is very slow to load the disc, even sometimes not at all. When it's load and play the video may freeze a lot while the drive and fast shipping and rewinding are a nightmare, that nothing is really happening, the picture just freezes. Boredom, it's a day DVD can be read without problems, but the next I meet the above problems. I tried to buy a DVD-ROM of Hama Laser Lens Cleaner disc, which did not solve the problem, it has made no difference.

    I encounter any problems when you watch a video recorded on Media Center, I am the owner of a TV Tuner and all saved games video very well without any problems. Also, I live in England so my hard drive is region 2.
    I have no idea how to fix this, it is very annoying. I'd appreciate any help that anyone can give me.

    Thank you.

    Hello Dan

    You can contact Samsung on the drive and see if there is an update of the firmware. If this isn't the case, you can replace the drive because it sounds like the drive itself is a failure.
  • Satellite A300-1MZ - Smart tool recognize problems with the drive

    Hi all...
    I have a * a300-1mz * I * a problem with the hard drive *.

    [This | http://img96.imageshack.us/i/diskinfoe.jpg/] is the _screen to a s.m.a.r.t. pens (* Disc 3.3.0 * Info) who acknowledge some problems with the disk.

    Can I send the laptop as collateral for a free replacement of the same disc?

    Among other things, sometimes * the computer freezes * no option to manually turn off the laptop (I think it always comes from the same disk):
    the screen stays fixed and 'Win Vista' does nothing comands.
    same "ctrl + alt + delete" Task Manager does not. The disc indicator light remains lit, but itself no longer believes it works

    Hello

    > Can I send the laptop as collateral for a free replacement of the same disc?
    If the authorized service provider can notice this problem too, you can get a new HARD drive for free. The ASP will order it and swap it out. It is a free procedure if your laptop is under warranty.

    > sometimes the computer crashes
    The HARD drive is perhaps the reason for this?
    Contact a service provider authorized giving them all the details and information. They can fix that also. :)

  • Disk space is full with 143 GB free space

    Hello

    I found a strange math calculations to Apple here. My disk space is filled with 143 GB free space.

    Here's the new math = 507 GB Apps + 119 movies GB 50 GB + 38 GB Audio 143 GB of space free Photos Plus 500 GB

    I use MacBook Pro (retina, 15 inch, mid-2014) with Mac OS X 10.11.4 running

    Thank you

    Kiran

    Hi Kirin, for more information on the other category in the view of storage , see this support article.

    There seems to be a bug in the about this Mac Look storage tab > system report > storage. It's probably different.

    Omni DiskSweeper can show you the exact size and location of all your files. It will be the inventory of your disc from files that occupy more space. It can also give you a fairer read disk space than the Finder or storage tab of the about this Mac. If you want you can even delete files from OmniDisk Sweeper. But beware, some items may be important for your system.

    For more information about the category others in storage to display, see this support article.

  • Problem with the retailer regarding Vista disk operation

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hi, I wonder if you can help me with some advice, it is on the PC I bought my father-in-law 6/8mnths ago. Until recently its been fine but lately its reading high and gel etc... to cut a long story short...  When I bought the PC 'Vista' has been pre-loaded and I never thought to check if a disc of the "Vista" operating system has been provided...

    The stepfather wants to re - install the system, but did not get a disc and never had one, when ive asked the shop on this subject that they say that they only provide a... surely that goes away, he said...

    Any help would be accepted with gratitude about whats the carnal... I had one with my Dell.

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • Problem with the HP G62 recovery disks

    Hello

    I'm having a problem with the restoration of the operating system on your laptop HP G-62. When I first bought the laptop, I was unable to make the recovery discs, so I ordered recently a few new HP. Because I have installed Ubuntu on the laptop, I wiped it from the disk hard drive used Wipedrive to remove the old Ubuntu operating system I had installed.

    Laptop computer reads the first disc ok and installs the component of windows, but when the screen lights up asking the two disc number it freezes and never installs anything when you try to move anything that used to screen it doesn't matter what and he used to install the second disk. He repeats just 'Please wait '.

    Thank you, Robert

    Hi, Robert:

    I can't help you get the recovery disks to work, but if you can read all 25 characters of the product key 7 windows on the bottom of your PC, you can do your own installation disc 7 windows to reinstall the operating system.

    Here's how:

    If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

    Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

    Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

    http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

    Use 25 characters on the PC product key to activate the installation.

    The key will activate a 32 or 64 bit installation.

    Then go to the support of the PC and driver page to install the drivers you need.

    Link to downloads ISO of W7 is below.

    http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

    Paul

  • If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

    If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

    Hi elvirkaric,

    Your question in Windows Server 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

    http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

  • Windows 8 "There is a problem with the driver for bluetooth hands-free audio"

    There is an X symbol by the sound icon, when clicked, it shows "There is a problem with the driver for the audio blue tooth hands-free". Troubleshooting has not been set, said that there is a bluetooth hands-free audio driver problem. In addition, when you look at the audio in Device Manager, error code 19 lights during all the points listed under ' audio, video and game controllers ".

    Hello

    Thanks for posting your question on the Microsoft community.

    We need more information about the issue so that we can help you better.

    What is the brand and model of your computer?

    Thank you for details on the question and your efforts to resolve.

    This problem may occur because of corrupted audio driver or settings.

    I suggest you run this Microsoft fixit and verify.
    Reference:
    Hardware devices do not work or are not detected in Windows
    https://support.Microsoft.com/en-us/mats/hardware_device_problems

    Automatically, he diagnoses and fixes problems with the hardware. Keyboard and mouse are not detected by the Manager of devices or when they do not work.

    I would also say that you uninstall and reinstall the sound drivers under "Audio, video and game controllers" and check.

    To uninstall the driver, please follow these steps:

    a. press Windows + R keys, type devmgmt.msc in the run window and press ENTER.

    b. Click to enlarge "Audio, video and game controllers", right click on the device, and then click Uninstall.

    c. restart the computer.

    Now, reinstall the drivers from the computer manufacturer's website and check the.
    Reference:
    http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

    I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my Applications

    Please refer to I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

    (Double Post)

  • Hello! I have CS5.5 Production Premium installed and now downloaded and installed CS6 PP Upg. Problem is the lack of space on the disk. What I can uninstall 5.5 or the Upg 6 should it work? I can move the 6 if necessary.

    Hello! I have CS5.5 Production Premium installed and now downloaded and installed CS6 PP Upg. Problem is the lack of space on the disk. What I can uninstall 5.5 or the Upg 6 should it work? I can move the 6 if necessary.

    Upgrades need not have the old version installed in order to work properly.  You can remove the old version if you wish.

  • I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and I was tol

    I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and they told me there is a problem with the .pdf application and I need to contact Adobe Acrobat. This can be corrected?

    uninstall any version of acrobat is installed.

    clean by Download Adobe Reader and Acrobat tool - Adobe Labs

    Restart your computer.

    delete all to delete pdf files.

    If this fails, it is a problem of ms.  If this attempt is successful, then reinstall your acrobat.

  • better integration with the Mavericks. Still a problem with the display of the menu bar spaces when moved

    Much better integration with the OSX mavericks on the latest version. Without a doubt ahead of Parallels in terms of dual display/full screen. The menu bar has been resolved, but there is a ghost menu bar that appears when you move one space (fullscreen vm) from one monitor to the other. It resembles a translucent bar on top and without words. But clicking on it shows menus as if it is supposed to be links there.

    Yes, it is a known problem with the Mavericks Developer Preview; We work closely with Apple to find a solution. So far, we have seen only with the restoration of the window or when you move the window between monitors - if you leave full screen and enter again, it should work fine. If you notice any others, please let us know.

  • Cannot get CF11 to download the free trial version for students.  Anyone having the same problem with the Adobe site?

    Cannot get CF11 to download the free trial version for students.  Anyone having the same problem with the Adobe site?

    Hello

    Please download from http://www.adobe.com/cfusion/tdrc/index.cfm?product=coldfusion&promoid=DJDUK use your Adobe ID and password to login and download CF11.

    Let me know in the case where you are facing any problems during the download, if you get any error try another browser.

    Thank you

    Priyank

Maybe you are looking for

  • Noise noisy fan on Tecra R850 (HDD vs SDS)

    _Computer_* OS *: Windows 7 64-bit* Toshiba * Tecra R850* Processor *: Core i7 2620M Sandy Bridge* AMD HD6450M Grafik *:* BIOS *: version 3.90 Gentlemen. in our society, we use the portable Toshiba Tecra for 3 months.The fan noise is to us aloud, you

  • Qosmio G50 - HARD drive blinks every second

    Well, if she's here, I have a Qosmio G50. I installed WindowXP Pro 64-bit. I noticed the hard drive light flashes every second. I spent some time searching the net for a soultion. This led me to download a utility called "process explorer" from micro

  • Satellite A135 does not stop

    I have a Toshiba Satellite A135 with Windows Vista that I bought last summer. He used to stop without any problem, but a couple of months, when I tried to close it would stay just on the screen 'shutting down '. I would have to press on and hold the

  • Xperia Z5: camera problem

    I bought Xperia Z5 double question face photos n not at all certain that they news r coming scramble the both sides of the screen in the center of the screen, don't look clear with no details...Can someone help if Miss me some thing or number with ca

  • HTC droid the DNA MTP error

    does anyone have a solution for win 7