Problem with the display of alt text

Hi guys, I have a strange problem here. my www.gogua.gr site cannot display alt text and I can not find the error, can you help me?

Your website doesn't have a problem with the replacement text apart from the fact that you use innapropriately.  What I think you are looking for is 'ToolTip' that IE displays when you hover an image with alt text?  If so, that is to say wrongly uses the alt text and Firefox is correctly I think that, with the title attribute.  It isn't your site that may or may not display the text, this is the browser.

With regard to the use of alt text to say 'click to enlarge', this isn't such a good idea.  The use of the text is to provide an alternative text for the image in case a viewer is not the images displayed, or uses a screen reader.  It should be used to describe the image.

Martin

Tags: Dreamweaver

Similar Questions

  • Problems with the display of the 3D graph

    Hello world

    I use a 3-d chart in one of my screws and I have problems with the display. See what it shows by yourself:

    So, as you can see, the chart does not correctly display the data. But one thing I know, is that the data are sent correctly, because when I copy the LabVIEW graphic and paste it into paint, what I see, this is the graph displayed correctly:

    Anyone know what may cause the problem? I also have a similar problem with a waterfall in 3D.

    You can always download the updates of ni.com so.

    I also went through a documentation on known LV 2011 issues. I was able to find something interesting onthis page:

    3D image controls can display transparently or LabVIEW crash on some graphics cards

    The 3D Picture Control is based on an OpenSceneGraph that uses OpenGL. It was noted several reports of the 3D image control crashing LabVIEW. In almost all cases, it was an Intel graphics integrated into question. This accident is due to a mismatch of the graphic material. Note: most 3-d charts use the 3D picture control

    Some possible workarounds are:

    • Update the video driver
    • Enable/disable hardware acceleration
    • Enable Aero in Windows 7
    • Disable Aero in Windows 7

    I might try these workaround solutions and see if any of them work for you.

  • "A problem with the display driver.

    Recently, I get an error message whenever I open Photoshop CS4. It reads as follows.

    "As Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

    "GPU improvements can be enabled in the Performance preferences panel."

    I checked the graphics cards in Device Manager, and when I tried to update the software, it told me that I was aware.

    • OS: Vista Edition Home Premium
    • Dell Inspiron 1520
    • Display driver: NVIDIA GeForce 8400 M GS

    Sincerely, Danny

    Hello

    Try to update your display manually driver and do not use the analysis of the drivers on the manufacturer's website either.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
    each driver in the list, additional useful information is displayed: load address of the driver, description,.
    version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
    video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
    cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
    own the software and drivers and all other main drivers that you have.

    Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
    (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
    updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

    Always check in the Device Manager - tab drivers version you install actually shows up. This
    because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
    pilot - reboot - check that it is installed and repeat if necessary.

    Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • Photoshop has encountered a problem with the display driver cs6 - win7 64 bit

    Hello

    I installed collection CS6 Mater, whan I tried to enter in photoshop I got this window «photoshop has encountered a problem with the display and temporarily disabled driver development using graphics hardware...» »

    Whan I get is window, the "parameters of the graphics processor is gray - «photoshop detected a problem in your display driver...»» »

    I have laptop with AMD Radeon R7 M260

    Win7 64 bit

    PC Toshiba laptop satelite l50 - b

    Hi doriv,

    • Update your graphics card driver.
    • You have the graphical configuration Swichable?
    • As Mylenium says you must add this parameter in graphic control panel so that Photoshop can detect your card.
    • Open graphic switchable Configuration and add sniffer.exe and Photoshop.exe (from C:\Program Files\Adobe\Adobe Photoshop Cs6). See graphics switchable troubleshooting questions unde... | Community

    Kind regards

    Assani

  • I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

    Photoshop has been giving me the warning:

    Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

    Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

    No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

    Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

  • Photoshop has encountered a problem with the display driver

    I've updated photoshop on my mac last night as it kept prompting me to do, and I have an exam tomorrow, which requires the use of photoshop. When I open photoshop this morning the following message appears:

    "Photoshop has encountered a problem with the display driver and has temporarily disabled the improvements using graphics hardware. Visit the Web site of the manufacturer for the latest version of the software. For more information, visit: http://www.adobe.com/go/photoshop_gpu_cc_en'. '.

    Can someone help me with this? IT IS URGENT!

    The problem is the driver for your video card, no Photoshop.

    Update the video card driver from the website of the manufacturer of the GPU (NOT Microsoft or a system integrator).

  • Problem with the display of Adobe PDF documents

    Problem with the display of Adobe PDF documents

    I have a Windows 7 Home Premium computer

    I read all the suggestions and I tried to download several versions of Adobe Reader for Windows 7 and Vista http://get.adobe.com/reader/otherversions/.

    Before you download each version, I would delete the current version with uninstalling programs for the control panel.

    After each new installation I shut down the computer and restart the computer.

    I tried to download the versions with and without going through my antivirus (CA Total defense) running.

    After downloading, I thought that the version downloaded successfully.

    I have read the help of Acrobat http://helpx.adobe.com/acrobat/kb/troubleshoot-reader-installation-windows.html and followed the instructions.

    None of the above helped.

    The problem is that any version of Adobe Reader, download, I can't open a PDF file and read it. Or the drive itself will remain open.

    1. If I try to open the drive from the desktop link or real program menu, the Player opens for 5 seconds and then closes spontaneously. If I try to click on the Player menu (File, Edit, View, window, help, tools), then an alarm will sound and the menu does not open. Soon after, the reader is closed.

    2. If I try to open the drive by double clicking on a PDF file then the Player opens but the document is not displayed (only the grey player screen PDF is specified), then the drive closes after 5 seconds on its own.

    The desktop shortcut shows like 'red icon Adobe Reader'. But the real program menu icon shows as empty a folder icon.  All documents in PDF format displayed as Adobe PDF icon.

    I tested several PDF files and none will open on this computer, but they will open on other computers.

    I created a word document and saved as a PDF file. It looked as if it had record properly (a the appropriate icon) but when I try to open it according to point 2 above the document is not displayed and then then the drive closes after 5 seconds on its own.

    Anyone have any ideas on what is happening and how can I fix?

    Could you please respond in this forum and send me an email at [deleted]

    I'm so confused and frustrated.

    I would try Windows Explorer, navigate to C:\Program Files (x 86) \Adobe\Reader 11.0\Reader, and then double-click Eula.exe and accept the license agreement

  • A problem with the display in a form with a ScatterGraph

    Hi all!
     
    Now, I want to do an image that can be expanded outside and inside with the viewport in a form with a ScatterGraph window. I tried previously to do this picture as a backdrop, but the backgroundpicture cannot be zoomed with the display window. How can I solve this problem?

    Here is the picture:

    Or I have to calculate a large amout of points to sign on the coordination of xy without the image, and how can I register quickly because it takes a long time to calculate.

    Hello

    You can zoom/dΘplacer an image as well as the plot in charts. Here is a snippet of code showing how you can do it.

    Normal
    0

    fake
    fake
    fake

    EN-US
    X NONE
    X NONE

    MicrosoftInternetExplorer4

    / * Style definitions * /.
    table. MsoNormalTable
    {mso-style-name: "Table Normal";}
    MSO-knew-rowband-size: 0;
    MSO-knew-colband-size: 0;
    MSO-style - noshow:yes;
    MSO-style-priority: 99;
    MSO-style - qformat:yes;
    "mso-style-parent:" ";" "
    MSO-padding-alt: 0 to 5.4pt 0 to 5.4pt;
    MSO-para-margin-top: 0;
    MSO-para-margin-right: 0;
    MSO-para-margin-bottom: 10.0pt;
    MSO-para-margin-left: 0;
    line-height: 115%;
    MSO-pagination: widow-orphan;
    font-size: 11.0pt;
    font family: 'Calibri', 'sans-serif ';
    MSO-ascii-font-family: Calibri;
    MSO-ascii-theme-make: minor-latin;
    mso-fareast-font-family: "Times New Roman";
    mso-fareast-theme-make: minor-fareast.
    MSO-hansi-font-family: Calibri;
    MSO-hansi-theme-make: minor-latin ;}
    table. MsoTableGrid
    {mso-style-name: "Table Grid";}
    MSO-knew-rowband-size: 0;
    MSO-knew-colband-size: 0;
    MSO-style-priority: 59;
    MSO-style-unhide: no;
    black border: solid 1.0pt;
    MSO - border - themecolor:text1;
    MSO-border-alt: solid black .5pt;
    MSO - border - themecolor:text1;
    MSO-padding-alt: 0 to 5.4pt 0 to 5.4pt;
    MSO - border - black insideh:.5pt United.
    MSO-border-insideh - themecolor:text1;
    MSO - border - black insidev:.5pt United.
    MSO-border-information - themecolor:text1;
    MSO-para-margin: 0;
    MSO-para-margin-bottom: .0001pt;
    MSO-pagination: widow-orphan;
    font-size: 11.0pt;
    font family: 'Calibri', 'sans-serif ';
    MSO-ascii-font-family: Calibri;
    MSO-ascii-theme-make: minor-latin;
    MSO-hansi-font-family: Calibri;
    MSO-hansi-theme-make: minor-latin ;}

    Image img =
    Bitmap.FromFile ("myImage.jpg");

    in pixels, this is the place
    where the image will be drawn

    RectangleF initialRectangle = Rectangle.Empty;

    in the data, to map coordinates the
    image

    XRange range;

    Range yRange;

    Private Sub PlotMyData()

    {

    plot your data here

    xData double [] = new double [] {3, 5, 7, 5, 8, 3, 7, 8, 2, 6};

    Double]
    yData = new double [] {9, 1, 2, 6, 8, 3, 3, 6, 2, 2};

    scatterGraph1.PlotXY (xData, yData);

    xRange and yRange define the plot area limits left-top to bottom-right

    xRange = new range (xAxis1.Range.Minimum, xAxis1.Range.Maximum);

    yRange =
    new range (yAxis1.Range.Minimum, yAxis1.Range.Maximum);

    RecalculateImageBounds();

    }

    Simply map the data coordinates
    values in pixels

    posts from the top left and lower right must be mapped.

    Private Sub RecalculateImageBounds()

    {

    PointF
    size = scatterPlot1.MapDataPoint (scatterGraph1.PlotAreaBounds,
    (xRange.Maximum, yRange.Minimum);

    initialRectangle.Location =
    scatterPlot1.MapDataPoint (scatterGraph1.PlotAreaBounds, xRange.Minimum,
    yRange.Maximum);

    initialRectangle.Width = size. X - initialRectangle.Location.X;

    initialRectangle.Height = size. Y - initialRectangle.Location.Y;

    }

    Just draw the image.

    Private Sub scatterGraph1_BeforeDrawPlot (sender As object, BeforeDrawXYPlotEventArgs
    (e)

    {

    RecalculateImageBounds();

    e.Graphics.DrawImage (img, initialRectangle.X, initialRectangle.Y,
    (initialRectangle.Width, initialRectangle.Height);

    }

    Make sure that the image is of good quality so that you can zoom in pretty close.

    I hope this helps.

  • Problems with the Display Mode target on end 2009 27 "iMac

    Used late 2009 iMac 27 "in the view target in conjunction with a Dell XPS tower with i7 processor, Windows 7 and the best graphics card I could afford at the time connected by HDMI to mini display port cable.  Worked well for years.  Set aside Dell for a few months and the update of the iMac to El Capitan OS 10.11.3.  Recently tried old setup with same Dell PC and was able to move from Mac to PC, but the PC screen resolution was at the lowest setting. I got an error message when enabling/disabling to PC who said there was a problem with the port causing mini display of the system back to the lowest resolution. Impossible to reset at a higher resolution.

    I tested the Dell PC on another monitor, and it works very well at higher resolution (2560 X 1440). Now, when I reconnected it to the iMac (which works fine), the screen becomes black.

    Is it possible that the operating system upgraded (El Capitan) is not compatible with the targets using mini display port Display Mode?  Any ideas?

    Use your iMac as a display with the target - Apple Support Display Mode , also consider having a bad cable or connection. Does not hurt to try different cables, they can and will the bad!

  • Satellite L750D-1FD - problems with the display driver

    I got this laptop from my uncle and it was filled with junk and crapwares so I did a clean reinstall and upgrade Windows 7 Home to ultimate. I have a problem with the GPU, windows does not recognize it, or doesn't fly chart AMD.
    Processor is AMD A8 - 3520 M APU, and I think that the GPU is a Radeon HD 6620 G or something before the re-installation. I can't change the resolution, it stuck at 800 x 600, memory shows by n/a, Direct X features are not available, not from the downloaded display driver Toshiba worked.
    Dxdiag appears to the:

    Name: Standard VGA Graphics adapt
    Manufacturer: Advance Micro Devices, Inc.
    Chiptype: AMD ATOMBIOS
    : Type DAC: 8 bit
    Memory Approx.Total: n/a
    Current display mode: 800 x 600 (1 Hz)

    It nothing and can do with this laptop now because the GPU does not work as expected. Please, help me to solve this problem.

    Hello

    I found only Satellite L750D-1FD so I think you have this model. I want to help you on any other way. Here is the correct order of installation for Win7. Please check and install all the available stuff you can find on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

    Win7 SP1
    4.9.2.0 TOSHIBA supervisor password utility
    TOSHIBA HW Setup Utility 4.9.2.0
    TOSHIBA Assist 4.02.02
    TOSHIBA ReelTime 1.7.18
    AMD driver 1.0.0.52 xHC
    8.834.1 - 110420 a-118118C-Toshiba AMD display driver
    TOSHIBA value added package 1.5.10.64
    ATI HDMI Audio Driver 7.11.0.7710
    Conexant Audio Driver 8.51.1.0a
    Wireless LAN driver
    Synaptics Touch Pad Driver 15.2.11.1
    V4.07 Bluetooth Monitor
    Atheros Bluetooth Driver Package v1.0.7 Filter
    Battery Bluetooth for Windows by Toshiba v8.00.06 (T)
    Atheros LAN Driver 1.0.1.50
    Card reader Realtek 1.0.0.14
    TOSHIBA 1.0.4 Wireless LAN indicator
    TOSHIBA Sleep 1.4.2.8 utility
    3.1.8 TOSHIBA face recognition
    TOSHIBA eco Utility 1.3.2.64
    TOSHIBA HDD/SSD Alert 3.1.64.8
    TOSHIBA PC Health Monitor 1.7.7.64
    ConfigFree 8.0.38
    TOSHIBA Web Camera Application V2.0.0.21
    TOSHIBA V4.00.7.01 VCR - HAS
    TOSHIBA resolution + plug-in for Windows Media Player 1.1.0
    TOSHIBA Disc Creator 2.1.0.9 for x 64
    TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 16_wMSI
    TOSHIBA Media Controller 1.0.86.2
    TOSHIBA Media Controller plugin 1.0.6.1

    If you need assistance more let us know.

  • HP 15-d059sr: the problem with the display of graphics in games

    Good afternoon!
    Watching such a problem.
    During work on the desktop (surfing on the Internet, work with documents, see the video online, film) is OK, but it is necessary to enter the game (Stalker, Diablo 3, etc.) begins to shake up the top of the screen, or play with the brakes. Even if the settings on display at the minimum system requirements.
    And in the case of Diablo 3 for a long time so it does not display during playback load of background music.
    Core i5 12 GB of RAM, all the drivers downloaded from the official website, including the video card.

    Hi @GuardianStation,
     
    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your laptop 15-d059sr HP computer and issues with the games. On gaming sites, it is suggested that it might be an update that is necessary with Java. Here, it is a link that you can check with.

    You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

    If you downgraded to the original version of Windows, this could be the cause. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

    Please let me know how it goes.

    Thank you.

  • Blue screen on startup... problem with the display driver?

    I have been using a Dell Inspiron 14R (N4110) laptop computer since 2010 without any problem.

    The laptop was purchased online from Dell and came with

    (1) Windows 7 Home Premium 64-bit and

    2) AMD Radeon HD 6470 M - 1 GB display card.

    Recently, I had a problem where my laptop just wouldn't start, showing the blue screen every time it tries to start. The blue screen mentions a problem with the file atikmpag.sys I understand is the driver for the AMD video card.

    If I delete/rename the files atikmpag.sys and atikmdag.sys (via secure boot mode) in C:/windows/system32/drivers, the laptop (not) start, but obviously does not recognize the graphics card.

    After a lot of unsuccessful trials debugging on mine (including trying to upgrade the drivers to display etc.)., I reinstalled the operating system and the drivers provided with the original kit (just to eliminate any possibility of an upgrade that went wrong). However, I still see the issue.

    That means there is a hardware problem? or a BIOS problem?

    Thank you

    R.B.

    Guys, the problem you describe is actually a hardware failure. There is nothing you can do except replace a motherboard for laptop, or taken some advanced technicians, COMPUTING which will replace or chip GPU reball.

    I have the same a laptop similar (Inspiron N5110), with the same problems and these problems - all started yesterday. Do not waste your time, just reinstall OS, then install display drivers, which are available on the official site of Support of DELL and after that - if it's not working, just do what I said.

    Generally these are consequences of an overheating laptop, but that it was certainly not my case (I did regular checks), I could even bet on chips quality GPU, which has been used in the manufacture of this model of laptop... again...

    UPDATE: Okay, last night was a long night for me and I can confirm finally - who's * chip AMD, which causes the blue screen, you mentioned. I disassembled my N5110 faulty, armed with a heatgun, Probe temperature (probe) and tons of aluminium + some flow of brazing, I made a fairly quick reflow and the result is just what I expected - everything works perfectly again, with the same configuration - even with the same installation of Windows, which has been to launch these blue screens. There are now no blue screen at all and portable computer performance as new.

    Apparently bad welding, when this laptop was manufactured, is the exact reason why we are where we are. The BGA chip was not dead at all (it was just poorly soldered). The same story, including HP and a bunch of other companies had some time ago with these NVIDIA chips (I know, some of you know what I'm talking about).

    CONCLUSION: Integrated DELL diagnostic software is useless against the detection of defects with a discreet graphics AMD card. Problem was not in the software or drivers - it was just a poorly welded chip (I regularly cleaned my laptop dust, so overheating is not an option here).

  • Problem with the display resolution double

    I connect to my laptop to a TV with a VGA cable. The TV has the ability to display up to 1920 x 1080. Normally, my laptop display mode is 1280 x 800. When I connect to the TV as duplicate display my laptop switches to 1024 x 768 and won't let me come back to 1280 x 800. How can I fix this. I need dual extended display or tv only is not an option. I need a way to have my normal screen (1280 x 800) resolution when you are connected to the tv (external monitor).  I know that this is not a problem with the VGA cable because I get a resolution of 1920 x 1080, if I select external display (tv). Thanks for your help! Someone else has a solution for me?

    Hello

    I suggest you to update the video card driver and check if it helps.

    Follow the link below and check if that helps.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Note: If the drivers are not updated, I suggest you to download the drivers from the Manufacturer Web site'w and install it then.

  • Problems with the blur effect on text in 3D

    I don't know if is ' t a bug or I have something running, but when I do a text layer, blur works fine, but when I turn on the 3D and even 3D per character, the blur stops working.

    Pic 2.png

    Here it is with the 2D and 3D text:...

    Pic 1.png

    Still, I don't know if this is a bug, so I'm just something wrong, but I make it work once, but after 8 hours of work on a project, had everything perfect, ready for rendering, Ae crashed, and when I opened the project, while blurring had been removed, with no way to restore the it. If anyone else has this problem and find a way around it, I'd love to know how, but any help is greatly appreciated at all.
    And staff, if it is a bug, it's a very frustrating. > XO

    Try to set your composition to a final rendering of quality Panel.  Your model is sent to the quick project. If that does not resolve the problem, let us know. It would also be useful to know the version of your OS.

  • better integration with the Mavericks. Still a problem with the display of the menu bar spaces when moved

    Much better integration with the OSX mavericks on the latest version. Without a doubt ahead of Parallels in terms of dual display/full screen. The menu bar has been resolved, but there is a ghost menu bar that appears when you move one space (fullscreen vm) from one monitor to the other. It resembles a translucent bar on top and without words. But clicking on it shows menus as if it is supposed to be links there.

    Yes, it is a known problem with the Mavericks Developer Preview; We work closely with Apple to find a solution. So far, we have seen only with the restoration of the window or when you move the window between monitors - if you leave full screen and enter again, it should work fine. If you notice any others, please let us know.

Maybe you are looking for

  • Brown shit

    Firefox is down. When he came, I now have this Brown crap. I lost my blue cats if it is not in the modules that it is enabled. On the address bar line, I have also some icons to the research. Why???????????????? It's the ugliest thing I've seen in a

  • Open lines additional drawing on the Smith chart

    If someone could tell me why the plot of smith, projected in the attached VI has drawn additional ones on a beautiful I would be eternally grateful. If you change the line style to be fair "points", you can see that there is no notes right, but once

  • When I opened a document PP it automatically converts to PDF. How to stop this madness?

    I frequently receive presentations PP sent me an e-mail.  When I click to open the PP, it immediately converts the PDF file. How can I stop this happenning?

  • Mystery Microsoft Files-Do I have need of all these files or can I delete the batch?

    I have 3 files on my C drive, all named as a string to a number, for example 6a34b3f7ad5039dc26e3c4. In these cases, there is a 25 folders numbered 1025, 1028, 1030 1031 etc over a folder 'graphics' and 'customer '. then there are all the other files

  • Inaccessible internal Bluetooth radio

    I am running Vista Business SP2 on a Lenovo ThinkPad with internal bluetooth radio. All of a sudden my bluetooth radio is inaccessible. When I press FN + F5 the wireless radio appears and bluetooth used to be there too, but now it is not. I can't upd