Similar Questions

• Problem with the drivers after changing Vista-> WinXP on R61i

  At first I want to mention that I am new to this forum and my native language is not English (sorry for the mistakes of language).

  Computing: Lenovo R61i 8943 g

  Foreplay:

  In the new computer Windows Vista has been installed, but I decided to switch to a Windows XP Professional.There had a few issues with the SATA controller (computer has no floppy drive). After all, I managed to install a new system.

  Description of the problem:

  I can't install the drivers to the computer (internet does not - same wired: ethernet, there is no sound, etc.) In Control Panel-> system-> device-> devices Manager there are yellow questions marks (with small exclamation points) around: network controller, PCI Device, unknown device (what is?), video controller, and video controller (VGA compatible).

  There is no CD that came with this computer, so I tried to find the necessary drivers on the internet.

  On the page

  Lenovo, drivers and downloads support

  I chose [network] to refine the results (first I want to activate ethernet Internet connections) and clicked on

  Broadcom NetLink Gigabit Ethernet software for Windows XP - ThinkPad R500, R61, R61e, R61i

  There is a file 7yra02ww.exe. At the last moment of the installation, the following window appears:

  Broadcom NetLink Gigabit Ethernet Software for Windows has encountered a problem and needs to close. We are sorry for the inconvenience.

  I don't know if I tried to install the appropriate driver. After I tried to install Access Connections (think Vantage Technologies) of

  ThinkVantage Access Connections for Windows XP, 2000-computers portable, but it also fails.

  Could someone help me what to do (what drivers to install and how)? Thank you in advance. Matthew.

  Thank you, Tim_Lenovo. My second post was about a possibility of making the easy instalation, but no one answered. Thanks - next time I'll use the system update

  I don't know what you got almost everything square away exactly means (I'm not so good in English), but I think it speaks of my redundant work.

  And the solution of my problem is very easy! I installed what it takes and just use the control panel-> power-> advanced options. (I think that my mind needs a rest!). In device manager there is a yellow question mark on unknown device (without power management there are two unknown devices without driver), so I thought that I need an additional driver. That's why I was always looking for appropriate software. A solution was so close to me

  I hope that the system update helps a lack of driver for a device unknown (I wonder what it is).

• Problem with the rules after upgrade of the VM in foglight cartridge

  Hello

  There is a small problem with the rules after that I updated the VM cartridge level.

  In the default rules, I changed a few settings so that they will act as I need.

  However, each time I upgrade VM cartridge my rules are off and marked as backup.

  The question is: is there a way to upgrade the cartridge and keep my active rules after upgrading?

  Best regards

  Victor

  This is the normal behavior according to this KB article

  https://support.quest.com/SolutionDetail.aspx?ID=SOL105872&PR=Foglight

  105872 knowledge article

   
  • return

  • Title

    Backup rules fill in the dashboard management rule after Foglight upgraded

  • Description

    After that an upgrade of Foglight was conducted, several backup rules are created for rules that have been published before the upgrade. For example:

    Cluster VMW IO network
    Cluster VMW IO network (backup)

  • Resolution

    During the upgrade procedure, the FMS has detected that some of the original rules have been changed in some way. It copies the rules previously upgraded in backups, before trying to merge the contents of the update rule in the former.

    Assuming that the FMS works as expected, the rules of backup can be deleted. However, it is best to confirm this in the respect of the rules first before making deletions.

    When editing rules, particularly rules OOTB (out of the box), it is recommended to copy the original rule, disable the original rule and edit the copied rule. This should reduce the risk of the problem described in this Article.

  Golan

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• Problem with the touchpad after upgrade to Windows Vista

  After that I've upgraded to windows vista I had problem with the touchpad, that I'm not?

  Can U help me!

  Maybe when you tell us what model of laptop you have. ;)

• problem with the drivers for the card microsoft virtual wifi miniport... problems with PnP devices

  He said to reinstall the drivers for this problem, but they don't reinstall... also he says hardware changes have been detected... can someone explain in easy to understand words what the problem is and how to fix it... pleaseeeeee... Thank you... The convenience store said: THERE IS A PROBLEM WITH THE DRIVER of MICROSOFT VIRTUAL WIFI MINIPORT ADAPTER... DRIVERS MUST BE REINSTALLED... it won't reinstall... also: PROBLEM WITH PnP DEVICES HARDWARE CHANGES HAVE BEEN DETECTED? CAN SOMEONE HELP ME UNDERSTAND, IN EASY WORDS, EXACTLY WHAT I NEED TO DO TO FIX THIS... CD-ROM... IM USING A SAMSUNG LAPTOP MODEL NPR 519 RUNNING WINDOWS 7... Thank you... Update on the microsoft Web site says: this DEVICE no IS NOT WORKING PROPERLY BECAUSE WINDOWS cannot LOAD THE DRIVERS REQUIRED for THIS DEVICE (code 31)... im not computer savvy please someone help

  Hi MAGIC,

  It seems that you may need to update your BIOS firmware.

  You may need to contact Samsung for more information, if the update is available for download on their Web site.

  When started this issue is happening?

  You can disable the virtual WiFi adapter, as it essentially works as a tool of development at the moment:

  http://msdn.Microsoft.com/en-us/library/dd815243%28VS.85%29.aspx

  What is the device that has the problem?

  Reinstall the drivers to fix the problem?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the Microsoft Office 2000 installation program & 2007 & 2010

  Recently used your windows

  Windows XP Professional SP3 integrated October 2012 (32 bit)

  I have a problem with the installation

  Microsoft Office 2000 Premium EN &

  

  Microsoft Office 2010 Professional FR more

  

  

  But MS Office 2003 no problem with him

  and when iam using win 7 32 any desk of installation nprmally

  MS Office 2000 & 2003 & 2007 & 2010 used and installation normally with no prpblems

  Please give me answer or solution

  Thank you

  Just a troubled life

  Have you tried to check and making sure that all the Windows updates were executed? Also you install this on an account with administrator privileges?

• Problems with the display after the update of Windows

  Hi guys,.

  I have not installed or updated all programs on my computer for at least a few weeks, with the exception of Windows Update, so part of MS updates, nothing has changed in recent weeks.

  A few days ago, my computer (HP dm1 laptop computer) screen acted funny - I took a screenshot of what happens and posted here:

  http://DL.dropbox.com/u/1076277/desktop_problem.jpg - basically, the display is all messed up with repetition of lines, etc.

  At first I thought it could be a driver problem, but the drivers are ok and were not being updated - in fact, in addition to the usual updates, the only new was the new update now live.

  I did a system restore (restore a week) and everything seemed normal again - this problem is intermittent, but very frequent, but within a few hours of use, there is no problems - until I run Windows Update, and it all started again...

  Any suggestions as to what might be the cause of the problem and a solution? I don't really have the time now to keep stable each item in the update...

  Thanks for the help.

  Hello

  If you want to study, it will take time but you can find the offending update.

  First update all updates (redundant, uh?).

  Make a note of all of the updates (KB numbers, etc.).

  Restore and install the updates one by one and not simultaneously.

  This way you can find the update 'wrong' and later come to conclusions based on what it is supposed to fix.

  Carlos

• Problems with the condenser after the recent update tool

  We have problems with the condenser so tool. The filter works correctly, but after a 'white' to use (looks like most exposed) rectangle remains in the image that cannot be deleted. We tried different layer modes without success: it does not react or the rectangle disappears but both the effect of the filter. Seems to be a bug (?) - Please help us as soon as possible. Thank you!

  Hi meuschke,.

  Our engineers are working on this issue, in the average as you try the below work around.

  After you change a 16-bit image using the Liquify Filter, edited areas are lighter than the rest of the image.

  Solution

  In the meantime, there are two solutions:

  Use pictures 8-bit instead of 16-bit images with fluidity

  Disable the GPU use to liquefy holding the key Option (Mac) or Alt (Windows) key down while you select the Liquify Filter in the menu filter.

  Related link: with the help of fluidity on the results of the 16-bit image areas clearer around changes

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Problem with the drivers on HP Pavilion Sleekbook 14 B009AU

  Hey everybody...

  I have a problem on the drivers on laptop HP Pavilion Sleekbook 14 B009au. How can I fix it? and where I can download its drivers? Please give me the direct link to download: smileyfrustated:

  Spoiler of the problem:

  Spoiler (Highlight to read)

  

  Hello:

  I see that you have installed windows 7 on your laptop.

  HP only supports the new laptops from consumers for windows 8.

  Looking at your screenshot, below are the links to the drivers, you need for windows 7 64 bit.

  First, install the AMD chipset driver and restart. The first file listed.

  Who will take care of usb and smbus devices.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Ethernet controller can be downloaded from the link below.  4th file on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Problem with the gallery after update 2.3 music

  Hello

  Recently updated my XperiaX10i (French version, not operator sim locked). No problem with the update itself and the phone seems to work fine.

  But, the music gallery has first not detected music files already in the sd card 32 GB (no problem for photos, videos or other files), and does not so load in the library. I had to download them all again through Media Go and now the library shows them, but album covers are not more in the album list as in version 2.1, which was very convenient for the selection, however the sleeves appear in the background during playback of a track: this looks more like a bug than anything else.

  I am also missing the first Quick Launch bar application for Wifi, Bluetooth, GPS, sync and the brightness of the screen, it seems that the launch of all these features to go into the settings file now.

  In conclusion, I hardly see what exactly improved on this phone since version 2.1. except maybe the speed and the quality of the screen display.

  Update from 1.6 to 2.1 was a total revolution in comparison.

  Power control widget is always there

  

• Problem with Audio drivers after updating through the solution Center

  I left the Lenovo Solution Center perform an update on my system, and now I get two error each time Windows starts upward.

  FIRST ERROR: "command line of TOMY Application has stopped working".

  I give myself two arrows to click:

  "Check online for a solution and close the program" (does nothing)

  -"Close the program".

  "Display the details of the issue" reveals:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: SACmd64.exe
  Application version: 11.0.0.0
  Application timestamp: 4ee94e0a
  Fault Module name: SACmd64.exe
  Fault Module Version: 11.0.0.0
  Timestamp of Module error: 4ee94e0a
  Exception code: 40000015
  Exception offset: 0000000000150225
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: e357
  More information 2: e357a1a1b0010a7001c2e1562bb09767
  3 more information: 7d1f
  Additional information 4: 7d1fe5f93672c47a0d347598ff39d707

  SECOND MISTAKE: "Dolby Advanced Audio.

  The current version of the Dolby audio driver is 7.2.8000.13 and the software application expects that the version of the driver 7.2.7000.11. Please install a valid application of driver and software combination.

  The only option here is to click an OK button.

  These errors did not appear until I left the Lenovo Solution Center perform a software update.  I would have thought that the built in Lenovo program would update the correct drivers and software applications.

  Can what steps I take to solve these two error messages?

  Lenovo Thinkpad Edge E430

  TYPE 3254-CTO

  Windows 7 Home Premium 64-bit

  Core i7-3612-QM CPU @ 2.10 GHz

  Kit of memory 16GB DDR3 1600 MHz Corsair Vengeance SDRAM (CMSX16GX3M2A1600C10)

  I source and solved my problem.

  Follow the link:

  http://forums.Lenovo.com/T5/ThinkPad-edge-S-series/E430-Dolby-advanced-audio-issue/TD-p/826333

  I found that the instructions given by a member was more useful.

  First go to;

  Start > Control Panel > hardware and sound > Device Manager >

  Then go down to "sound, video and game controllers".

  Then 'right click' on the 'Conexant 20671 HD' and on the left, click on uninstall.

  Wait for the uninstall process to finish and then restart your computer.

  Wait a few minutes after the start to the top and Windows should automatically re - install the driver, that invites you to a message in the lower corner box right saying: "driver installed successfully', with the name of the driver below. (Mine was the same driver "20671 HD"

  Bingo, problem solved.

  If this does not work for you, there are other solutions and/or forum members/staff that can help.

  Hope this helps,

  Rexe

• Problem with the resolution after the installation of the Nvidia Gforce 105 on my laptop Driver.

  Hello, recently I installed nVidia - showing - NVIDIA GeForce G105M I downloaded via Windows Uptade. After that my only possible resolution is 1024 x 800, that looks really bad on 15.6 laptop screen.
  I can't uninstall this uptade because I simply he see in "Programs and features" Menu in the control panel. What can I do? What is the problem? Why Windows Uptade crushed idyllic mine working on my laptop, I thought uptades via Windws Uptade are reliable.

  In Device Manager, roll back the driver, then in recommended winupdate settings turn off updates.

  All the necessary drivers for your laptop must be obtained on the laptop computer manufacturers site. If roll back driver does not help, reinstall the drivers from your laptop manufacturers site

• Satellite P200 - 14 H - problem with the software after reinstalling Vista whindows

  I have a Satellite P200 - 14 H, who bought systems Activ of Romania. I got a Toshiba DVD with an image pre-configured Windows and my driver's license windows vista Home premium. After several blue screens windows crashed after 5 days. It was a software problem. I am a network administrator and I need several virtual machines Linux vmware server Windows.

  The DVD provided with the laptop is not really suited to my needs to reinstall windows because it throws my entire hard drive and is not an option. I took a friend a DVD windows vista Home premium and using my key from the sticker on the back of my laptop I reinstalled win without deleting all of the hard drive but only the partition c. I downloaded all the drivers of your site even if I found them really hard (model PSPB6E because that model PSPB6E I don't find it anywhere) everything is good except that "Flash Cards Support Utility" and «» Hardware Setup' give me the following error: "serial number is invalid '. I don't know what to do to be able to use the function keys I knew which are installed by 'Flash Cards Support utility'.

  If it is not good that I did give me another solution that does not need to wipe entire HARD drive, but only the C drive and use the DVD that you have provided or give me access to some place to be able to download all the drivers and software that can be found on the original DVD (those above and to burn DVD and Norton internet security center and so on)

  Thank you very much and please be so kind to give me a solution quickly because I really need this computer and I am unable to use it.

  Hi Adrian

  I'll try to clarify a few things;
  First the drivers for Satellite P200 - 14 H PSPB6E series are placed on the page of Toshiba Europe and it of really not difficult to find.
  Secondly the Vista serial key, which is located on the bottom of the unit cannot be used with another copy of Vista OS! This will not work!

  You have installed the operating system Vista from the CD to friends, but you used a serial key that does not match with the Vista on CD to friends! As a result, you get the message error "serial number is invalid!"
  The utility of Flash cards is required to use the keys FN under Win Vista. It visually shows the use of the FN button.

  I would recommend another way of installation
  First, you must use the DCD from Toshiba recovery. Back up your data first!
  Then after installing the OS, create a new partition and install your favorite OS (Linux, XP, etc.)

  If you n t to use the Toshiba recovery but CD the original Microsoft CD Vista then you need to use the original series OS key that belongs to the MS Vista CD.

  Good bye