Problem with the files in the folders

Similar Questions

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• Problems with the sound on my PC (i.e., no noise at all). m ' said that the Sndvol32.exe file is missing

  I have problems with the sound on my PC (i.e., no noise at all).  He told me that the Sndvol32.exe file is missing.  I went through the 'fix - it' and the solution is to extract the file from the Windows XP CD.  My PC did not come with it - otherwise, how can I get this file?  Thanks in advance!

  Most of the people do not have a genuine XP bootable CD.   This is good advice if you have a true bootbale CD, but given that the majority of people have never seen one in their life, why start there?  That's why this kind of troubleshooting tips kill me...

  The fix it will not help you.

  This will help you:

  I downloaded a copy of the file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  You have to put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

  Of course the file must never be missing, so something has badly haywire.

  If the system is working properly, what do you think has happened since the last time, that he did not work properly?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  No matter what you use for the antivirus/antimalware protection, I followed with some other respectable malware scanners, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Problem with the playback of an audio .asx file in Windows Media Player.

  Hello

  I'm not able to play an audio .asx file in Windows Media Player on the Windows Vista-based computer.

  I get the following in a pop-up error message:

  Windows Media Player cannot play the file because the specified protocol is not supported. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:" or "rtsp:").

  Help, please.

  My email address is * address email is removed from the privacy *

  Thank you.

  -HimAlandi

  Hello

   
  1. facing this problem with the .asx format?
  2. you remember to make changes to the system?
  3. where is the file?
   
  Error message: "Windows Media Player cannot play the file because the specified protocol is not supported. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:" or "rtsp:"). »
  Windows Media Player cannot play the file because the specified protocol is not supported by the player or not supported by the server.
  If you encountered this error by clicking a link on a Web page, the link isn't valid.
  If you encountered this error by typing a URL in the open URL dialog, try opening the file using a different transport protocol (for example, "http:" or "rtsp:").
  The following is a list of protocols supported by the player and the correct URL syntax examples:
  
  (a) MMS://serveur/nom_fichier (for example, a file with a .wma, .wmv, .asf, or .mp3 extension)
  (b) http://server/filename
  (c) rtsp://server/filename
  (d) mms://server/sami.asf? SAMI = http://server/sami/sami_demo.smi (SAMI file)
  If the Player supports the protocol you used in the URL and you can't always read the content, check that the drive is configured to use all of its supported protocols.
   
  To configure the protocol settings
  (a) in the Player Windows Media, on the Tools menu, click Options.
  (b) in the Options dialog box, on the tab of network in the Streaming protocols area, select all the checkboxes (Multicast, UDP, TCP, and HTTP) Protocol, so that a check mark appears in each.
  (c) note that the supported protocols can be used only to distribute digital media files. Windows Media Player cannot be used as a browser.
  If the fixes above don't work, you can rename the folder of information network for the drive so that it can rebuild its information network files after restarting it.
   
  To rename the folder of information networking of player.
  
  (a) close Windows Media Player. (To do this, on the file menu, click on exit).
  (b) to make the changes that you will be able to see the hidden files and folders
  Show hidden files.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-hidden-files
  (c) click Start, and then click computer.
  (d) open the disc drive Local (c :)), open to users.
  (d) open your user account.
  (e) open %APPDATA%\microsoft\windows\sendto and open Local.
  (f) open Microsoft and open Windows Media.
  (g) click on the file and rename it.
  (h) if the file is name12.0, edit as file name as old 12.
  (i) restart the computer and check

• Change hard drives where the files stored, how to ensure that no problems with the catalogue

  I replaced the 3 TB drive (and readers of backup related) who hold all the image files on my Mac Pro with a 5 TB drive.

  The player has only the image on her files. The catalog and previews remain in the folder of images on my main system drive.  I formatted the new drive in an external hard drive enclosure, then used Super Duper to copy the image of the old 3 TB HD files to new hard disk 5 TB. Now, I'm ready to install the new HD 5 to in the computer and the catalog of links to it, but want to make sure you do it correctly.

  This player has 81 000 image files, catalogued in 15 "buckets", each "bucket" with about 15 cases of work, so I obviously want to make sure that I don't have to tie all these files by hand.

  What is the best method to do this, so I have no problem with the catalog know the new location of the files?

  Mac OSX 10.10.5

  Lightroom CC 2015.1

  Thank you!!

  This player has 81 000 image files, catalogued in 15 "buckets", each "bucket" with about 15 cases of work, so I obviously want to make sure that I don't have to tie all these files by hand.

  What is the best method to do this, so I have no problem with the catalog know the new location of the files?

  Instructions are here: Adobe Lightroom - find folders and files moved or missing connect the parent (as shown in Figure 4) folder, and then all subfolders will be also connected. If I understand your use of the word 'bucket' (do you really mean "parent folder"?), then you will need to do this for each of the 15 buckets.

  It would be much easier if you had a 'bucket' or parent folder and many subfolders and sub-sub-folders.

• I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR

  I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR, I never had this problem before there was a sort of update that could from cause?

  What is the destination folder that the date be underneath?  In the top right it says users who suggests, you try to put the photos on top of your username instead of under your username.  Maybe that's the problem.  So change your folder in the drop-down list at the bottom right of what it should be rather than users, and if you're going to show us the destination of your photos at least scroll through the list of folders down right so that we can see which is the white highlight.

  Here is how mine looks like if I want to put my photos imported under my subfolder users - Steve - photos by date:

  

• I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A & B. A is the way it should lo

  I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A & B. A is how it should look like and B what happens once I have, I opened several tabs. I can get it back to normal if I click VIEW, click Customize. When the window customize appears that Firefox returns to its normal state. I have to click on the done button and go back to what I did. I tried to reset FireFox back to the default settings, but that has not fixed the problem.
  It started happening a month. Is there a way I can fix this? Thanks for your help. I don't know how to fix my 2 attachments that shows the problem I'm having.
  [email address removed to protect your privacy and security]

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Problem with the RTEXE file on PXI system

  I have attached the image of the comic to a very simple code that illustrates a problem with a file RTEXE on PXI system.

  If the VI (LabVIEW 2011) is started on the target of the RT of a LabVIEW project, no problem.

  If the code (with the shared variable linked to a typedef of indicator I32, lvlib being on target and ctl files) is compiled and run in starting my PXI system, it does not (message = "bad state" or something equivalent in french)!

  But when the shared variable is disconnected the typedef, the RTEXE file runs correctly in starting...

  No explanation for this strange behavior?

  A way to execute a RTEXE file on a PXI controller with shared variables typedefs?

  Thanx & BR,

  HL

  I have an answer on the french section of the forum: it's a LabView2011 bug, fixed in LabVIEW2012.

  LabVIEW2011 the only solution is to disconnect the shared variable the typedef

  Kind regards

  HL

• How to do this: Photoviewer, Windows cannot save changes to the image due to a problem with the properties of the file!

  Hi, I'm trying to post a photo, but whenever I have try rotation to the right, it says something like: can't save changes to the image due to a problem with the properties of the file. My laptop is MS, but the photos were taken on the Iphone. How to do this?

  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• Problem with the file naming

  I can change my names of files successfully, mp3s to be precise, uniformly. Windows Explorer or Altap Salamander, there really is no problem with my file name.

  The problem starts to appear when I put my mp3s in my playlists (VLC, WMP, media player in my cell phone). The old file name keeps showing even though I have already changed the original/source file.
  For example, a song I downloaded bears the title "WTF * Chris Brown-int ' love ' so I changed it to 'Chris Brown - International Love' since that's how I name not all the thousands of my mp3s. But when I added the song to my playlist, the original title is one that appears and not the new. This case is the same with most of my Media Player.
  Is it possible for me to keep my desired/preferred file names when using the Media Player files? It's really so frustrating.

  Usually, media players like WMP does not show the name of the file of the song, but display the title and artist in the song tags (also known as metadata). To change these tags in WMP, add your songs to the library WMP library, right click on the tag you want to edit, and select Edit.

  You can also change the labels of the song with external tools such as Mp3tag.

• Problem with the executable files

  Hello all, I need a help from you...

  I use LV 2009 SP1 Professional Development Suite on Windows Seven and I have a problem with the executable files, a problem that I have ever found with other versions of LV (8.x, for example) and I'm a little surprised...

  In the attachment you will find an example of what I mean.

  There are two base screws, the main one (prova) and a Subvi (provasubvi). The main vi launches the Subvi and the Subvi simply create a chart. As you can see on the screws works fine, without any kind of problem.

  I also created the exe file, without specifying that no particular option... and 'magic' of the application does not work as I want. In particular, it seems that the Subvi is running, but the front panel will not be accessible.

  I also try to play with the Subvi construction structure and options, but nothing change.

  Did you ever solve something like that?... I would say that I thank you in advance for any suggestion...

  Andrea

  Hello andrea,.

  Looking at your project I've heard that you do not include the Subvi during the build of the project. SO I slightly modified. Please find the attachments.

  Thank you and best regards,

  srikrishnaNF

• I ran CHKDSK, the report tells me I have problems with the file system, usn journal. ___

  I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.

  Describe how you run chkdsk.

  That is what the report said: you have problems with the sys file?

  CHKDSK examines the disk space and use of the disk for the table of allocation of files (FAT) and NTFS file systems. CHKDSK provides information specific to each file system in a situation report. The report shows the errors found in the file system. If you run chkdsk without the /f on an active partition command line option, it can report errors because it cannot lock the drive. You should use chkdsk occasionally on each disk to check for errors.

  If you run chkdsk from a command prompt while Windows is running, it can report errors or it may not report errors - and it may report different
  Errors each time you run.  If this is the case, it could just be the way you run chkdsk.

  Here's how Microsoft explains this observation:

  "... CHKDSK may report that the disc is damaged, even when there is no
  current real corruption. This can happen if NTFS happens to modify
  areas of the disc on behalf of some programme activities that CHKDSK is
  review at the same time. To check a volume correctly, the volume
  must be in a static state, and the only way to ensure that the State is
  to lock the volume. CHKDSK only locks the volume when /F or/r (which
  involves the 'F') is specified. For example, you may need to run CHKDSK more than
  time so that it can complete all the steps in read-only mode. »

  If you run chkdsk from a command prompt, you are not the necessary static state and you can encounter errors "when no real corruption is present. This is how it works when you use this way.  Any changes made to a NTFS file system modifies the USN Journal.  If you are not in a static state, your USN change Journal probably all the time, so what you see (says something like that) can be quite normal.

  Two ways to ensure that you are in a static state is to run chkdsk from the Recovery Console or to schedule a chkdsk to run the next time that the system
  Restart by answering Yes to the question:

  Would you want to check this volume to be the next time the system restarts?

  If chkdsk reports errors when running in a static state, the errors should be investigated, resolved or explained.  This may take several
  chkdsk runs all of the issues and some problems cannot be resolved by chkdsk.

  If chkdsk runs the next time the system is restarted, the activity and the result will be displayed in the application event log.  Look in the Application log for
  Winlogon events and a source have the date and the duration nearby time chkdsk.

  It is in fact a chkdsk additional reading if you want to learn about it and it will explain everything you see and why your expectations exceed reality.

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony!

• Windows Media Player cannot play the file because there is a problem with the audio device.

  Original title: Media Player

  I tried to play my music in media player and they will not play. The tab that appears says "Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer, it can be used by another program, or it may not work properly. Also, I can not play music in the window, that I downloaded everything. If anyone has an answer I would appreciate the help. Thank you

  Hi MikeMcKayXE,

  ·         What is the brand and model of the computer?

  Follow the suggestions below for a possible solution:

  Method 1: Quit other programs that may be using your sound device, and then try to play the file again.

  Method 2: Install an updated driver.

  Step 1: Firstly uninstall the audio from the device manager driver and Add / Remove Programs

  a. click Startand then click Control Panel.

  b. click Systemand click on the hardware tab, then click Device Manager.

  c. to the title sound, video and games controller, check the sound card that is listed.

  d. right click on the sound card, and then click Uninstall driver.

  Step 2: To see if an updated driver is available, use Windows Update or access the sound device manufacturer's Web site.

  Follow these steps to do the same thing:

  a. click Startand then click Control Panel.

  b. click Systemand click on the hardware tab, then click Device Manager.

  c. the title sound, the video controller and games, make sure that the sound card is listed.

  d. right click on the sound card and then click Update driver to install the latest version of the driver.

  e. visit the sound card manufacturer's Web site to determine if a newer version of the driver is available for download.

  Method 3: If you have multiple audio devices installed on your computer, try to use another. The selected audio device might not support Secure Audio Path (SAP).

  You can see the following article for more information:

  Resolution of the problems of reading in the Windows Media Player for Windows XP

  http://support.Microsoft.com/kb/306317

  Let us know if that helps.

• Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities of free ware

  Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities free ware. Also, windows Explorer does not display dimension and other video related information for the file. Y at - it a tool that can indicate what exactly is the problem with the file.

  Ritu

  Hello

  1. you get any error message?

  2. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/279242

• I am running Windows XP and I'm trying to upgrade to Windows 7. There seems to be a problem with the administrator no no not the permission to create a file?

  I am running windows XP.  I try to install the upgrade to windows 7.  I was on the phone with technical support of 4 - 5 times, and they may not always help.  There seems to be a problem with the administrator and with not not permission to create a file?  I have a HP desktop computer. Can anyone help?

  original title: help with Windows 7 install

  Hello

  ·         Account administrator that you use?

  ·         You have the disc to install Windows 7 or upgrade disk?

  Follow these steps and check if that helps.

  Step 1:

  To see if your PC is ready for Windows 7, download free Windows 7 Upgrade Advisor. It scans your PC for potential issues with your hardware, devices, installed programs and recommends what to do before upgrade you.

  Windows 7 Upgrade Advisor

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Step 2:

  Follow the exact steps in this article and check if that helps.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  Note: Make sure that you back up all important data on the computer before you install Windows 7.

• I have problems with pdf files, sent to me by e-mail, download doc on my canon printer and the creation of pdf file to send.

  Original title: pdf files

  I am running microsoft windows xp home edition 2002. I always have problems with pdf files, sent to me by e-mail, download doc on my canon printer and the creation of pdf file to send. I use microsoft works Task Launcher 2004 edition.

  Is there an easy way to pass so I can handle pdf files?  Can anyone help?

  Thank you Tim

  Hello

  Please provide us with more specific information on the issue. Your post is a bit confusing.

  If you need to open the PDF files, you will need to install a PDF reader.

  If you try to print in PDF format, you must install Adobe Reader.

  Reference: http://www.adobe.com/downloads/

  THIRD WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.