problem with the guest in WLC 4402 account

Similar Questions

• Performance problem with the guest operating system

  Hello gurus - I have one of the most unusual questions, I ran into a few time.   Here it is:

  I have a guest w2008R2 OS - installed in a 5.1 version of VM 7 vSpherer - which has an Emulex LPe 12002-E 8 GB dual HBA port is assigned to the as 2 PCI (1 device per port) via DirectPath devices

  The guest operating system has an application that performs backup tests.   WWPN of the HBA is zoned in the fabric and declared in the interface of Compellent Storage Center and everything is good here. the application creates a replay of a volume, mount it as a drive, read all the blocks, then dismantles and moves then repeat the process with what ever additional volumes should be safeguarded.   It is so cool I have do this with a VM right and not a physical host?  (would be cool if I had work NPIV but that's another story, not with technology HBA vendor support...)

  So, what's the problem?   Well, the bed the mounted disk backup will work extremely slow as slow as 5MB\sec flow, then during any other activity takes place on the system the flow jumps up to 150MB\sec all of a sudden and will continue to run fast for a long time and finish jobs on time with each work taking a little more than an hour.  But when the slow going the same work (all jobs are the same, they are simply by reading all the blocks of a bunch of 200 GB volumes and wrote a set of NULL value, do not forget this is just test) takes up to 10 hours to complete.

  I think that what is the culprit?   POWER MANAGEMENT.

  I have just about each performance counter and the journal of events known to man and I don't see anything abnormal on the table, ESXi virtual machine, nothing.  But what I see in the newspapers is any kind of activity that could happen in a transparent manner to save energy.

  FACTS on this case:

  -Reservation of memory is defined (it must be for directpath otherwise, you can't power on the virtual machine)

  -Booking CPU - has not been defined before an hour ago, I gave her just a small reserve for this rule, so I do not know if this will help alleviate the slow flow, or have an effect on what I think is a question of power (unit linked) management

  -windows power management is set to high performance never-ever - but not until an hour there doesn't I changed advanced settings for USB Disabled------turned off.  PCI peripheral energy saving setting was already off.  Which is in contradiction with my theory.  But maybe, just maybe, something is broken somewhere, or could be a bug... blah blah blah

  -the HBA, Emulex, as it appears in Device Manager in the guest OS doesn't have a power management tab to disable the feature, I don't see that the adapter VMXNET3 had this tab, and I turn off the power save setting to be conservative, do not think that it was the culprit, but as there is no real data running through the NIC.  The data is simply to be read from the disk mounted, not copied on any wire Ethernet.  never the less, in the Emulex properties is a Details tab and a selection of power data, and performance data indicate you what power mode, the device is, as well as feeding supported systems.  D0: full power, but D3, which shows as supported by the device, is an energy saving mode.   I could not yet attend the setting at the time of slow activity, my good intention as soon as possible. He is currently shooting in D0, full power.

  This is so what I have to offer on this, I hope that its just...   If I'm missing something, or if others have experienced this massive loss of unknown flow without reason and have resolutions, please share.

  If there is a way for me to disable power on the Emulex HBA management inform you please, I don't mind if I stop to enter the firmware, if that was even possible.  But if possible I would disable it immediately before any new tests are executed.

  The root cause of this issue has never been identified by VMware support which for me is a question of ugly.  Reservation of CPU for the VM using directpath IO with HBA installed in it corrected the problem.  I'd be leary with direct path IO.

• Problems with the implementation of a Frontier account

  My e - mail was changed recently fron Verizon to the border.

  I did everything properly to add the account of the border and I get a message "connection error".

  The Motoblur email address is Verizon one.

  Is there a link between the now inactive Verizon account and the inability to add a new email?

  If so, is there a way to reset motoblur messaging without restarting?

  If you have your account existing Verizon on the phone and that you no longer want it you will have to click on the account, then select the button at the bottom to remove the account. If the new account uses the same information as the old, it may be in conflict.

  The only thing you should have to do with the new account is to add the e-mail address and the password.

• How to solve the problem with the blocking of my hotmail account?

  I can not connect to hotmail. He say, I've been blocked, wants me to put in info in order to restore, but nothing happens. It also allowed me to change my password, but can't always get to my ACCT. I give the e-mail address of my spouse for a response from you.

  You could start with the Windows Live Solution Center, take a look at:

  http://windowslivehelp.com/solution.aspx?SolutionID=f172cbee-3c73-4506-8a1d-4e6e82adb846

• I have a problem with the guest account, defined as the administrator and other users as standard.

  Original title: "Guest account" is defined as an administrator and other users are standard. Unable to create new accounts or edit the ranks.

  Hello.
  I have a Dell INSPIRON 1545
  Windows 7 Home Premium

  Somehow my "guest" account that you can toggle is administrator.
  my other 'Ordinary' user is a standard user and I can't do the promotion.
  Because this "guest" account is Administrator I can't ' create new accounts / change accounts / disable comments / CMD refuse orders. "
  "I don't have the"windows drive"so there is no need to restore my windows / safe mode does not help either.

  I read a thousand threats and issues on this topic but nothing helped me.

  Help, please!

  to be honest I don't know if the administrator account is enabled.

  You have fallen into a popular trap, the trap of not plan and create an alternative emergency admin account, even if you have a spare emergency House key. It's now cause you a lot of grief. If the problem occurred recently, then you can resolve as follows:

  1. Use your repair Windows CD to start the machine in Repair Mode.
  2. Invoke the system restore to configure Windows to a point before the problem occurred.
  3. Plan in advance and create, test, and document this absolutely essential spare admin account.

  If this does not work then send me a note (pegasusDOTfnlATgmailDOTcom).

• VMWARE Newbie - installation problems with the guest operating system

  I heard a lot about the use of VMWARE for a long time so I downloaded and then installed ESXI 3.5 on a test area.  I installed the client and have been able to create a new virtual machine.  However, I run into some difficulty with installing a guest operating system.  All the pdf that I could find have suggested that simply by putting a CD in the server's drive and then turn on the virtual machine would start the my guest operating system installation process.  Unfortunately, my VM doesn't seem to see my CDRom and tent drive a start-up network, followed by a brief wait for the message 'Operating system not found' timeout.

  Can someone please help me find a way to create a new guest OS on my VM so that I can.

  1. understand the process

  2 start testing.

  Thank you in advance.

  If you have installed of course the VI Client to create the VM, and you insert the CD into the ESXi host? You can go to change settings on the virtual machine, click the CD/DVD and select the option use the host device. Also ensure the connection to turn on is checked.  When you turn on the virtual machine, it should see the CD that you inserted in your ESXi host. Once you get the operating system to load, you can configure to allow remote desktop connections and access the VM as a traditional physical machine, rather than relying on the console of the VI Client view.

• Problem with the mail out on one account POP3

  I created my personal e-mail account (and not the gmail account) on my droid... I used all the parameters that I learned to use my internet provider (optonline). I get incoming emails under this account, but my outgoing mail never reached the addressee. I checked so to double all the settings... The rep at optimum said that maybe I should use a default SMTP, the outgoing server, as prescribed by Verizon, instead of using the SMTP of optonline?

  try clicking on the "necessary sign in ' I had the same problem and it fixed

• In my laptop that is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help out me

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: in my laptop is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help me.

  I have seen at redistry Edit it's explorer.exe in winlogin sell attribute.

  Hi HiteshAstan,

  one) don't you recall making any changes to the computer before this happened?

  (b) what exactly happens when you sign in to your account?  You get a specific error message?

  Step 1: Let us check if the problem persists in safe mode

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

   

  If the problem persists, you can deduct that the user account is corrupted

  Step 2: Create a new administrator account and then try to repair your user account

   

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  After the back if you have any questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• problem with the connectivity of customers after mixing several models with WLC 5508 Setup WLAN ap

  Hello

  I have 2 5508 wlc and AP 1130 and 1200 in my test harness.

  Currently, WLAN set is in place and works very well but the customer become a frequent problem with the power of the weak signal same AP is installed very near the place of the customer.

  I have my doubts, if I have a question because I use several models of AP in my set-up?

  How to rectify the same question?

  Some time customer gets limited connectivity, means that they usually get IP also.

  What are all the parameters to check in WLC?

  (1) very difficult for a person on a forum to respond. Check if your AAA server was indeed seen as inactive at the same time for other devices.

  If this is not the case, check the network connectivity between the 2. Maybe packets are lost between wlc and aaa server...

  (2) as I mentioned, it may have nothing to do with clent near or far from the AP. What happens if your DHCP server is not responding to the client? What happens if the dhcp request never reaches the level of the DHCP server for some reason any?

  You must investigate all along path to find out why the customer is not getting an ip address.

  Troubleshooting involves trace of sniffer, debug, client, etc...

• Problem with the touchpad: Tap to click does not work if I use a standard account

  Hi all

  I have a problem with my laptop that I don't understand and I need help from the community.
  As the title says... If I connect to my laptop using a standard account the touchpad does not work if I try to tap to click. Left and right buttons work, move the slider works, works of scrolling, but endearing tape... not even a single tap. If I log in with my account as an administrator, the touchpad works like a charm, no problems. Tap to click and everything you want. If I disconnect the admin account and sign in as a standard user, the problems are back again. I can move the cursor, click on the two buttons (left, right), but I can't type to click...

  I tried to reinstall the driver for the touchpad (which is MOMENTUM...) but it did not. I tried to see if there is any option that can prevent this tapping or something... but in the control panel > Touchpad > Tap is turned on. A strange thing in the control panel of the Touchpad is that [when loggend as a standard user] I get an error "unhandled exception has occurred in your application. If you click on continue the application will ignore this error and attempt to continue. If you click on exit the application will close immediately. "and a new line saying"index was outside the bounds of the array. If I click on continue the error disappears, but reappears if stationary "double-tap" enable/disable option. If I click on leave the Touchpad Control Panel closes...

  All this trouble occurs only when I use the standard account. With the administrator account, I don't get any errors so I soar options, disable them, activate them and most importantly, the tap to click works.

  What is the problem with the standard account?

  I have Windows 7 Home Premium 64-bit Service Pack 1.

  Can someone help me please?

  Hi Johnxf,

  ·         Did you do changes on the computer before the show?

  As he works in an administrator account, then probably your standard user account have been damaged and would need a fix.

  Follow the article provided below to fix the corrupted user profile:

   

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Let us know if that helps.

• When I try to record photoshop mi account, there is a problem with the internet connection and I can't continue. How can I solve it?

  I bought a book on Photoshop CS many years ago, and once I installed it in my computer it says I should I enroll the account in order to use Photoshop (or something similar), and it also has a link to go directly to the website of the registry. The problem comes when I try to access this link given, which is an internet link. It appears that my Internet connection is not secure, so I'm not allowed to continue the process, even if I don't really no problem with the connection. As I'm talking about an older version of Photoshop CD, the problem might be that something related to the incompatibility with my version of microsoft. How can I solve this problem, if there is no possible solution?

  Hello

  You can try to use a different browser for this. You can also save the product key by following the steps

  (1) connect to Adobe.com/accounts

  2) click on the plans and the product.

  3) click view your products.

  (4) enter your serial under register no. your products

• Problems with the relaunch of the CC Photo account

  Tried to restart my account during my stay abroad (USA), the account now has a problem with the payment and cannot be reactivated (assumed that the monthly rate is due to the weak USD-Euro exchange - please helpP

  Please contact customer service for updating the payment. You can use: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• Problem with the bulk loading IOM account to AD

  Hi all
  
  I'm doing a loading block account for AD in IOM. I followed all the steps in the oracle documentation.
  
  I entered the user in the format of CSV file data. Data in the example are given below:
  
  Primary data in the Table:
  UD_ADUSER_UID, UD_ADUSER_FNAME, UD_ADUSER_LNAME, UD_ADUSER_ORGNAME, UD_ADUSER_BNUMBER, UD_ADUSER_OBJECTGUID
  TWoods, Tiger, Woods, "' 22 ~ CN = Users, DC = gkidmsolutions, DC = com", B000004, 104 "
  TCruise, Tom, Cruise, "" 22 ~ CN = Users, DC = gkidmsolutions, DC = com ", B000005, 105"
  WSmith, Will, Smith, "' 22 ~ CN = Users, DC = gkidmsolutions, DC = com", B000006, d149e9add00198469b1ebef579911024 "
  
  Data in the Child Table:
  UD_ADUSER_UID, UD_ADUSRC_GROUPNAME
  TWoods, ' 22 ~ CN = users, CN = Users, DC = gkidmsolutions, DC = com ".
  TCruise, ' 22 ~ CN = users, CN = Users, DC = gkidmsolutions, DC = com ".
  WSmith, ' 22 ~ CN = users, CN = Users, DC = gkidmsolutions, DC = com ".
  
  All of these users are already available in both IOM and AD. I am trying to establish links between these users through loading bulk. I am able to load bulk account using the IOM bulk load utility. After loading bulk accounts, when I go to the tab the user resources, I see a user resource AD for the respective users with the status 'Configured'.
  
  However, the problem is when I try to update any user information through the process of the object resource AD shape, this not updated for AD. An exception mentioned below can be seen in newspapers. Looks like the loading block creates a map that can be seen from front end, but in fact, he is not pointing the user to the AD. Am I missing something? Help me!
  
  *********************************************************************************************************************************************
  "Current execution LOCKUNLOCKADADAMUSER
  Target class = com.thortech.xl.integration.ActiveDirectory.tcUtilADTasks
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > <>=
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > < com.thortech.xl.integration.ActiveDirectory.tcUtilADTasks: unlockADUser: the user could not unlocked >
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > < =.
  >
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > < = start the Stack Trace = >
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > < com.thortech.xl.integration.ActiveDirectory.tcUtilADTasks: unlockADUser >
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > < String index out of range:-1 >
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > < Description: String index out of range:-1 >
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > < java.lang.StringIndexOutOfBoundsException: String index out of range:-1
  at java.lang.String.substring(String.java:1931)
  at java.lang.String.substring(String.java:1904)
  at com.thortech.xl.integration.ActiveDirectory.tcUtilADTasks.unlockADUser (unknown Source)
  at com.thortech.xl.integration.ActiveDirectory.tcUtilADTasks.lockADorADAMUser (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  to com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADCSLOCK_UNLOCKUSER. LOCKUNLOCKADADAMUSER (adpADCSLOCK_UNLOCKUSER. Java:163)
  at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADCSLOCK_UNLOCKUSER.implementation(adpADCSLOCK_UNLOCKUSER.java:61)
  at com.thortech.xl.client.events.tcBaseEvent.run(tcBaseEvent.java:196)
  at com.thortech.xl.dataobj.tcDataObj.runEvent(tcDataObj.java:2492)
  at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(tcScheduleItem.java:2919)
  at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(tcScheduleItem.java:553)
  at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:604)
  at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
  at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(tcOrderItemInfo.java:374)
  at com.thortech.xl.dataobj.tcDataObj.update(tcDataObj.java:664)
  at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:508)
  at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2906)
  at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(tcFormInstanceOperationsBean.java:710)
  at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(tcFormInstanceOperationsBean.java:426)
  at Thor.API.Operations.tcFormInstanceOperationsIntfEJB.setProcessFormDatax (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
  at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
  at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
  to $Proxy341.setProcessFormDatax (Unknown Source)
  at Thor.API.Operations.tcFormInstanceOperationsIntfEJB_h6wb8n_tcFormInstanceOperationsIntfRemoteImpl.__WL_invoke (unknown Source)
  at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
  at Thor.API.Operations.tcFormInstanceOperationsIntfEJB_h6wb8n_tcFormInstanceOperationsIntfRemoteImpl.setProcessFormDatax (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
  to $Proxy178.setProcessFormDatax (Unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
  at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
  to $Proxy337.setProcessFormDatax (Unknown Source)
  at Thor.API.Operations.tcFormInstanceOperationsIntfDelegate.setProcessFormData (unknown Source)
  at com.thortech.xl.webclient.actions.UserDefinedFormAction.editForm(UserDefinedFormAction.java:2033)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:269)
  at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(tcLookupDispatchAction.java:133)
  at com.thortech.xl.webclient.actions.tcActionBase.execute(tcActionBase.java:894)
  at com.thortech.xl.webclient.actions.tcAction.execute(tcAction.java:213)
  at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
  at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
  at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
  at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
  at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
  at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
  at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
  at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1914)
  at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:463)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at com.thortech.xl.webclient.security.CSRFFilter.doFilter(CSRFFilter.java:78)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at oracle.iam.platform.auth.web.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:122)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthContextFilter.java:108)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:111)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
  >
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > < = end of stack memory trace = >
  EXECUTEREMOTESCRIPT running
  Target class = com.thortech.xl.integration.ActiveDirectory.tcUtilADTasks
  "# SessionContainer:valueUnbound: expired Session of the name of the event is: Xellerate.Session.

  Looks like a problem with the value of the UD_ADUSER_LOCKED field. Change to retry and value non-zero.

• Problems with the Forums account

  I just logged into the forums using the http://communities.VMware.com/home.jspa url and I noticed that my last login date is October 24, 2008.  Then I noticed that my points are in 1819, which means that I have not accumulated any new points since this time either.  Is there a way, or someone who can check my account/profile working?

  ________________________________

  Jason D. Langdon

  The date of "last connection" is a known issue and we have a solution for it, and I have a provisional approval to deploy next week.  I will update Blog VMware communities when it goes live.

  I'm not aware of any problems with the points, but it will consider.

  Best regards, Robert

  Robert Dell'Immagine, Director of VMware communities

• Problems with the Windows and Windows Update problem of Installation of KB2416472 component.

  Original title: I use SFC. EXE

  Error detected

  How can I fix this, or I have to re - install window again.

  CSI 0000015a [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  The same with 0000015c detail above.

  00000309 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:35:51, CSI Info 0000030b [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:35:51, CSI Info 0000030 c [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "

  00000367 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:38:13, Info CSI 00000369 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:38:13, CSI Info 0000036 [SR] a the item is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "
  2010-10-08 12:38:13, CSI Info 0000036 c [SR] full repair

  Having a problem with the Update window for

  Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2416472)

  I followed the recommendation, that nothing has changed.

  Download size: 4.7 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow a malicious user to compromise your Windows system that is running the Microsoft .NET Framework and gain access to information. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.

  Thank you

  Hello

  Problems with the Windows Sidebar?

  It seems that the problem is related to the Windows Sidebar. Remove all third-party sidebar gadgets if

  Follow these steps and check if it helps.

  Logon as administrator-

  a. If the sidebar is running - make a right click on the sidebar near the lower clock icon right in and out

  b. Click Start - Type "CMD" in the search box - find top - right click it and run as administrator.

  c. replace C:\Program Files\Windows Sidebar by copying and pasting this command->

  CD C:\Program Files\Windows Sidebar
   
  d. press enter (this is assuming that your sidebar is on C:, otherwise use the letter of the drive is on)

  Guest should be--> C:\Program Files\Windows Sidebar >

  e. then copy and paste each of them following their tour to enter

  regsvr32-u sbdrop.dll

  regsvr32-u wlsrvc.dll

  regsvr32 atl.dll

  regsvr32 sbdrop.dll

  regsvr32 wlsrvc.dll

  Sidebar should now work.

  Also if you scan SFC does not fix a corrupted system file, you can follow the steps from the link below.

  Look under "'If the System File Checker tool can not repair a file, proceed as follows :" "

  As with regard to the installation of KB2416472, to install this hotfix, you must have Windows Installer 3.1 or a later version installed on the computer. To get the latest version of Windows Installer, see the following Microsoft Web site.

  Windows install 4.5 Redistributable
  For maore information, see: http://support.microsoft.com/kb/2416472

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]