Problem with the HD Photosmart 5360 D software

Similar Questions

• problems with the HP Photosmart Plus b210a Wireless

  Good evening. I have some problems with the HP Photosmart Plus b210a. Precisely after printing when the printer is not detected on the network and is defined as "not available". The works remain in the queue and the printer is turned on and on again unable to work in print queue.
  The printer on the network report says "Success" for each element

  It is the same for the iPhone 4 and iPad 2

  The system is composed of:

  MacBook Pro 13 "with OSX 10.6 update now
  Connected to the Internet router Wavewgate Digicom3G150 with key
  HP Photosmart B210 Pro Aio series with ultimate drivers Apple

  Network:
  D4 HW (MAC) address: 85...
  192 168 123 102 (non-static) IP address
  DHCP configuration
  Authentication: WPA - PSK
  Encryption: Auto (AES / TKIP)

  The same system also use a PC with Windows Seven Home, but in this case, the printer works PERFECTLY! Even with the iPhone and iPad!

  Thank you for the help that you can give me

  OK, I will assume that the connection of the printer to the router and the router are OK for 3 other devices work correctly.

  Make sure that your OS X is healthy:

  1. download and install OS X Combo Update.
  2. download and install the printer drivers HP from Apple.

  After that, you can reset the printing system once more.

• Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

  I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

  Does anyone have any suggestions?

  Hey Spider! First of all welcome on the forum.

  I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

  After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

  Thank you

  SeanS

• Problems with the screen resolution, Cloud based software and Photoshop after the last round of updates Windows 8.1.

  Original title: screen resolution problems.

  Since the last series of Windows 8.1 update the resolution of my monitors has been changed for the worse. I use an AOC 2367 M (resolution 1920 x 1080) as my first monitor and a 42 inch Sony Bravia (resolution 1920 x 1080) as my 2nd monitor. The changes are more noticeable on the Sony Bravia and any adjustment I make to the resolution only make worse it.

  I also have problems with some software clouds as I load using citrix and when I try and navigate once opened software, I can't because the pointer selects a point about 50 mm on the side of the where he is hovering. In fact it is very difficult to open and close as anything and I resorted to the laptop to get concrete results.

  Photoshop now also comes up with a message when I open it up to inform me that the monitor profile seems to be defective.

  Any suggestions would be helpful as I thought initially an another upgrade must follow to correct the ills of windows 8, but appears not to have happened.

  Hi Joseph,.

  Thanks for the reply.

  Method 1:

  I suggest you to download and install all Windows updates available including optional updates. You can also install the latest device drivers for all devices including display drivers and monitor drivers on the manufacturer's Web site.

  http://eSupport.Sony.com/Perl/select-System.pl

  http://www.aocmonitorap.com/root/ANZ/download_driver.php

  Method 2:
  Adobe Photoshop CC version 14 is compatible with Windows 8.1. See Windows Compatibility Center for more information. To solve the problem with Photoshop CC, I suggest you try the procedure described in the article and see if it helps.

  Cloud applications help creative /CC crash immediately after launch
  http://helpx.Adobe.com/Photoshop/KB/CC-applications-crash-immediately-launch.html

  If the problem persists, I suggest you to contact the Support from Adobe.

  http://helpx.Adobe.com/contact.html

  To solve the problem from software hosted accounts, you may need to contact the Support to count.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Problem with the HP Photosmart C4780 connection after moving

  I recently moved into a new place, so, get a new router, connection. Since I moved, I was not able to connect my printer (HP Photosmart C4780) to the wireless network. When I try, an error message indicates that the IP address of the printer does not match the one on the PC (a Windows 7 32 bit). How can this problem be solved? Thanks in advance

  From the front of the printer: [Scan] Setup > network > network by default.

  Now run the HP software to add your printer (start > all programs > Hewlett-Packard > C4700 series...)

• I have a problem with the HP Photosmart C4680.

  Hi... having a printing problem... pages of windows 8 are blurry printing... have you tried downloading... yet all first page comes out blurry... but when I print the pages of the HP troubleshooting site they come out all perfect... my computer is an AH512 of Fujitsu Lifebook... of ideas please?

  Hi Colin,

  Thanks for the information.

  It seems that this problem is hardware related. Misaligned cartridges can do that.

  Please refer to the procedure described in the following link to resolve this problem.

  Align the ink cartridges
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01369878&LC=en&DLC=en&cc=us&product=3739150

  You can also consult the steps and the instructions given in the following link:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/Photosmart-C4680-blurry-printing-of-PDFs-and-Web-pages/TD-p/2747519

  For more help on this problem, contact HP support.

  If you have questions about Windows operating systems, help us on this forum.

• Problem with the HP Photosmart Premium (c410a)!

  We just got this new printer for the office that I work in and it installed fine, but when I put a sheet of paper in it for the scanner, usually the "HP Solution Center" appears and I can customize the menu scan... but when I tried scanning something, the Solution Center has come, but it is completely empty. We tried to uninstall and reinstall the software and turning the printer and the computer on and outside, does not. The computer is Windows XP Professional.

  Anyone know of any solution to this problem?

  Thank you in advance,

  Miranda

  Never mind! I ended up installing Adobe Flash Player, and now it works fine!

• Problem with the HP Photosmart C3180 for Vista printer all-in-one drivers

  Need help to reinstall my printer HP Photosmart C3180 all-in-One printer because I can not install the disk to download

  * original title - my computer went down and I had reinstalled Vista program, but my printer has not been reinstalled and I can't reload the disc to do this. I have a HP Photosmart C3180 all-in-One printer *.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=1146331&LC=en&cc=us&DLC=en&submit.y=5&submit.x=4&lang=en&cc=us

  Select your operating system to the above link > and then download the Drivers good > install according to the instructions from HP.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=1146331&LC=en&cc=us&DLC=en&submit.y=8&submit.x=5&lang=en&cc=us

  Installation, configuration, etc. info at the link above.

  For any other questions about your printer, contact HP:

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us&product=1146331&lang=en

  See you soon.

  Mick Murphy - Microsoft partner

• Problems with the software of fax on 1536dnf

  Hi, I just got a 1536dnf all-in-one, and I have a problem with the software sending faxes. I can fax machine directly, but when I try to send a fax from my computer, I can't even get into the software. I get an "internal error" that there is no device detected. I installed it on my network, so about four different computers can access. I'm running Windows XP SP3 and any other function works fine (I can print to the printer from each computer, send and receive faxes from the printer itself, etc.).  Any ideas why this happens? I found zero documentation or help on this and any help would be appreciated.

  Thank you.   I was using FAX4Word plugin for Word.  It allows to easily print/fusion of fax machines.

  I answered my own question, but others may be interested in:

  I was buy HP printers since the time that first, they came out with the LASERJet House, I waited in line to get one at the then price of $700 or more.  I bought a HP product on average every 3 years after that.   All HP products were excellent quality and easy to use.

  Once I looked at the question of the use of the 1536dnf as a modem, I found that I was MUCH better off just buying a modem from "Zoom" $ 50 for my database driven fax needs rather than trying to send it through the HP.  If it is possible to use the 1536dnf as an intuitely MODEM, it is a solution too complex to simply get a modem to 'Zoom in' $50, which leaves my 1536dnf available for other tasks.

• HP pavilion n242se 15: problem with the BIOS software

  Hello
  I have HP pavilion 15-n242se and I have the problem with the software of the BIOS, because when I restart the computer it turns off completely and go back a few seconds later.
  Please, I want to again software for BIOS for Windows 10 64 bit
  
  Can you help me?

  SyrianCow

  Sorry for the bad news, but HP does not update the BIOS of your PC for Windows-10.

  They planned them to Win8.1, and you should have to do the upgrades at the time, BEFORE you upgraded to Win10.

  The HP BIOS upgrades are OS-specific version, so now that you have upgraded, you can no longer run these.

• Photosmart 7520 error: there is a problem with the printer. Turn the printer off, then on.

  I have a photosmart 7520 affected by the following issues.

  Issue #1: randomly, all lights start flashing market and the screen reads the following:

  Error. There is a problem with the printer. Turn the printer off, then on.

  I can't find a move that throws this to happen.

  #2 problem: When the printer is turned on and slowed down, also at RANDOM times, the printer will "Ding" followed by the flashing light wireless. So what sounds like the cartridges are cleaned, then a sound like the charger spinning or the printhead full running followed from one side to the other, then ending with a "Ding" and then back to normal.

  When this happens, the wireless connection is disconnected and then reconnected. Also, this disables the "Scan to computer" function on all computers on the network and manually requires the reactivation of all.

  From what I can tell the printer restarts itself.

  It is plugged directly into the wall outlet, no surge protector.

  Technical support has already go through the stages of the print head, me up to the top of the chain and eventually replaced the printer with a new brand.

  THE NEW PRINTER STILL DOES THINGS AS PRECEDENT.

  This printer is connected wireless to router Netgear N900. My all current computers running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.

  If someone is or has experienced the same or similar problems, I could sure use help.

  Solved myself.

• HPPIW. EXE does not solve the problem with the installation of the complete software for 8500 A909g

  Waterboy71 - sorry for a new position, but the forum is read-only (?) so I can't respond to your response to my problem with the installation of the driver/software 8500 A909g.  By your answer on 5/19, I downloaded HPPIW. EXE and it ran.  It detects my wireless printer, but it tells me that "the selected printer is not supported by this wizard."  Is there another thing I can do to install the software so that I can scan and fax from my Windows laptop 8.1?

  Hello
  If please try following the steps below and check if this can solve the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Software for printing device Kodak esp7250 does not load as areas appear gray and Kodak said that it is a problem with the operating system 7

  I have problems trying to reinstall my printer software Kodak esp 7250.  The area where you register the software is empty and the Browse button to choose a place is gray, so it will not go any further because if you then choose then says invalid path.  Of course, it's an invalid path because it will not choose an or allow me to choose one.  I contacted Kodak and after working with it for a while, they said it's a problem with the operating system.  I have Windows 7 on a laptop Gateway.  I need my printer and get very frustrated because nobody seems to know how to solve this problem.  I was able to use it when I got to the laptop, but suddenly one day it wouldn't work.  Help, please.

  Hello

  Thank you for your response.

  Make the SFC scan and check the status of the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I would also advise you to check the status of the issue in a new user account.

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!

• has had an alert that there is a problem with the installation of IntelliPoint software

  I got an alert that there is a problem with the installation of the IntelliPoint software. To resolve this problem, you must remove IntelliPoint software, and then run Intellipoint Setup again.  If I have remove it where do I go to run the installer?

  Hello

  You can go here: http://www.microsoft.com/hardware/en-us/downloads

  then select the keyboard and mouse or other device you can download the latest version of the Intellipoint software.

  Thank you...

  The thread is placed automatically in Windows.

• All in one Photosmart - problems with the re - C309a install.

  Hello

  For the above, I, a Windows 7, 64-bit computer. I tried to reinstall the printer, but whenever he asks me to re - start the computer as some files should always be deleted. Once the computer is restarted, then the software starts the Setup program and install, but it gest to the point to repeat once again the message above need to reboot to remove some files pending and so on.  This creates an endless loop that never installs the software.

  Any ideas?

  I'm sorry you have a problem with the drivers.

  Try a couple of different steps of uninstall.

  1. click on Start Menu

  2. Select all programs

  3 right CLICK on COMPUTER

  4. choose MANAGE

  5. go under the tabs (image and devices and printers).

  6. If the printer is on any tab, right-click top, and UNINSTALL

  Also try clicking on the start menu

  1. choose all programs

  2. Select HP files

  3. choose the name of the printer

  4. click on uninstall

  Let me know if this uninstall all printer software.