Problem with the information in the audio codecs
Some of my mp3s have no tagged album art and information in correctly. That's why the sansa fuze does not display an mp3 information. Can someone suggest me a free software to mark up information in mp3s please?
The most popular program around this forum seems to be MP3Tag. To do this, that you probably want to do.
I use on occasion and works quite well. Some on the forum almost bowing down to the feet of the developer... I'm not quite in that camp. Personally, I use another program of marking, but it is not free.
Tags: SanDisk Sansa
Please can someone help me? I have a laptop U300-13U and that you have installed iTunes on it. However, when I open iTunes I get an error message saying 'iTunes has detected a problem with the audio configuration and may not play correctly' which is an understatement - it does not at all!
I uninstalled, reinstalled iTunes and Quicktime, but in vain. I have searched and exhausted the iTunes support boards but have nowhere either. The sound is fine as I can read CDs with no problems at all. The only suggestion I can get is that there may be a problem with the audio device magnet is not Apple and vice versa.
Does anyone have AN idea at all as to what might be going on here? I'm completely out of my depth, I'm just a simple girl who wants to play his music!
Thank you so much.
I don t use iTunes so I m not an expert player but first of all, you must give us some important information:
-What operating system do you use?
-Are you using the factory settings (Toshiba Recovery disk) or your own version of Windows
-Do you have the yellow exclamation marks in Device Manager?
OK, iTunes says that there is an audio configuration problem so do you trying to update the audio driver? If this isn't the case, you should try it.
See the Web from Toshiba site for an update and see what happens. Then validate your result:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
Original title: Media Player
I tried to play my music in media player and they will not play. The tab that appears says "Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer, it can be used by another program, or it may not work properly. Also, I can not play music in the window, that I downloaded everything. If anyone has an answer I would appreciate the help. Thank you
· What is the brand and model of the computer?
Follow the suggestions below for a possible solution:
Method 1: Quit other programs that may be using your sound device, and then try to play the file again.
Method 2: Install an updated driver.
Step 1: Firstly uninstall the audio from the device manager driver and Add / Remove Programs
a. click Startand then click Control Panel.
b. click Systemand click on the hardware tab, then click Device Manager.
c. to the title sound, video and games controller, check the sound card that is listed.
d. right click on the sound card, and then click Uninstall driver.
Step 2: To see if an updated driver is available, use Windows Update or access the sound device manufacturer's Web site.
Follow these steps to do the same thing:
a. click Startand then click Control Panel.
b. click Systemand click on the hardware tab, then click Device Manager.
c. the title sound, the video controller and games, make sure that the sound card is listed.
d. right click on the sound card and then click Update driver to install the latest version of the driver.
e. visit the sound card manufacturer's Web site to determine if a newer version of the driver is available for download.
Method 3: If you have multiple audio devices installed on your computer, try to use another. The selected audio device might not support Secure Audio Path (SAP).
You can see the following article for more information:
Resolution of the problems of reading in the Windows Media Player for Windows XP
Let us know if that helps.
Original title: speaker FOR desktop
In the deskstop I connected an external speaker INTEX WITH power SUPPLY via USB and pins with audio jack. The device is installed REALTek. When I play songs or video, he said: -.
"Windows Media Player cannot play the file because there is a problem with the audio device. "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.
How to solve this problem.
I realize has the inconvenience that you are having with your speakers that you get an error message while playing the songs. I will certainly help you to question.
I would like to know some information:
Have you tried to plug any other speakers or headphones?
You did changes to the hardware/software before this problem?
Have you tried using these speakers with another PC?
Also, I suggest you refer to the suggestion of Pinaki reducing replied on June 20, 2014 from the link below:
Hope this information helps.
Thank you to provide us with the information to look for more on this subject and to better understand the issue and we will be happy to offer our help.
Please get back to us with an update on the issue, we will be happy to help you.
No puedo playsecure musica in mi equipo nor any type of audio creo what must an audio to a problema con el device ofI can´t listen to music or any audio on my computer. He said that there is a problem with the audio device... I Don t know that I have to do!Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should helphttp://captaindbg.com/how-to-update-drivers-on-Windows-7/ (also works on Windows 8)
We meet a few important issues in streaming Hulu through Apple TV. The problem is with the audio. When we start a new episode of a television show, frequently, there is no audio data. The audio plays fine during the advertising leading up to the episode, but then he went to the start of the episode itself. Last night, for example, we tried to watch an episode of Casual. No sound. I restarted the same episode 3 times (which meant, annoyingly, I had to attend the same ad 3 times), and each time it was audio at the announcement, but then no sound during the episode. I unplugged Apple TV, wait a minute and plugged in. Choose the same episode and had the same problem.
Before last night, we were sometimes able to get audio on Hulu content, but it is seldom worked without similar problems - there is no audio data, or sometimes there will be audio briefly but then it disappears. We will not experience this problem streaming other services by the Apple TV, such as Netflix, HBO or with iTunes media. Any advice?
It is a second generation Apple TV, purchased in September 2010.
Exactly the same problem with Hulu here on ATV2. Its been like that for months and only getting worse. Also, randomly that it recharges during playback. If you can spend the first few minutes of couple of a show (by the start/stop several times) it will play the rest of the show OK.
I'm having a problem with my audio sampling rate. For some reason, it is set at 8 khz by default when I export. It wasn't a problem until the last update (2 weeks ago). I'll try and give all the info I can to the front. I also tried customer support... which was a nightmare.
OK, the question that I address is that when exporting audio sampling rate is 8 kHz by default. Which to my knowledge has NO relevant use what so ever. Even when I set the file format to the h.264 format, he insists on the reset to 8 kHz. Even if I manually set all look rendering queue and click on output module again once it back the sampling frequency to 8 khz automatically of changes that I need to set it again. Why can it not only be fixed to 48000 like all other adobe products is and as it was two weeks ago. Does anyone have an answer?
This problem is resolved by update fixes after effects CC (12.2.1), which is now available:
Note the part at the end of this page on a crucial update for the creative cloud desktop application, which addresses serious problems with the SOUL, first Pro and After Effects.
I recently installed successfully IDT - Audio - IDT High Definition Audio CODEC and after that none of my audio worked. Everything indicates that the audio is working as usual, but no sound. Also, when I did a test "sound" in the control panel > sound, it is said "the test could not be played. (Translated from Finnish Windows Vista, but anyway). I went to IDT Audio settings (from the bottom right icon) and noticed that my headphones and speakers had been cut so I removed the 'secret' of these two, but nothing happened. I tried to restart the computer several times and recheck the IDT Audio settings but nothing found which could cause the problem.
My HP Support Assistant tried to make me update this driver I have the computer in mid-August. Same thing; whenever I have install the driver, there is no sound either - I have not known what you mentioned above on the sound slowly disappears. Thahaseena, good to have you hear. I am running Windows 7 family on a HP Pavilion dv6 Notebook PC. After installation, there is no request to restart or stop to install updates; my sound card lists an error and I have to roll back the driver to make it work again.
My driver date is January 13, 2010, version 6.10.6265.0. It's one that I continue to back and it works. I will install the update now and tell you what I get for audio driver is not working.
The properties of my IDT HD Audio CODEC says:
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)
You must restart your computer before the changes made to this device will come into force.
New driver that disables my sound: June 17, 2010, version 6.10.6289.0. Well now, it asks me to restart, but I'm not having good hope... will write if this time it solves the problem (4th time charm?).
I recently had problems with my microphone and speakers/headphones and game controllers.
Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.
Stakeholders sometimes still work when I connect headset.
Some of the sounds are still coming through the speakers while some coming through the headphones.
I have a usb game controller which also did not work everything properly.
If I assign buttons in the program that they do not work in the game.
All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.
Any body have similar problems or know what to do better?
See you soon
Can you please send some details on the laptop model and the system you are using?
With regard to the issue of sound/mic:
> The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.
Are you talking about internal microphone or external? This only happens using Skype?
In your case I would test the microphone using different applications to make sure that is not a Skype related issue.
> Yet sometimes the speakers work when I connect headset.
I recommend this thread:
The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
+ In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
+ There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. +
+ So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+
Regarding the game controller:
> I have a usb game controller which also did not work everything properly.
> If I attribute buttons in the program, they do not work in the game.
I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller.
All of a sudden, I can't play Itunes, Windows Media Player, bec.of this audio configuration problem. I prefer not to take it to get fixed, can get expensive. Anything I can try/do, before having to take in? I have zero noise, my speakers don't work either, for no apparent reason...
You could check in the Device Manager; Make right click on my computer then left-click on Properties, and then click the hardware and Device Manager. Check if there is no yellow exclamations next to all audio devices, if there is then try to uninstall all the drivers sound card first to the Add / Remove Programs, restart your system and then reinstall the audio drivers. You need to restart your system to see if your audio works again.
The problem you are experiencing may have been caused by an infection, but may also be due to a failure / interrupted the update of Windows.
In some cases, that I've been able to solve the type of problem you encounter in doing a complete reinstallation of Windows XP, but this is a last resort!
Let me know how it goes anyway.
--> I hope this helps! Please mark it as correct answer or vote if it does :)<>
http://www.pcuk.biz - my website
Sorry in advance if this has been asked before but I'm not 100% sure on how to describe the problem im having with my audio after export. Here is a link to the video - https://Drive.google.com/file/d/0Byffs2-9EE3bdDdWcDNVNGVaMnc/Edit?USP=Sharing . * Please TAKE NOTE THAT THE LYRICS ARE EXPLICITES AND so THAT THE VIDEO CAN BE OF A GAME VIDEO IT IS GRAPH * then the audio sounds fine edition and when I export the level is of approximately - 18 dB, but when you play quicktime sounds almost like his crackling and popping and im not sure why. If this made a difference im playing through some monitors connected through my AU Apollo Quad interface. Thanks to anyone who can help understand me what's wrong.
Just an update. It turns out it was my interface. He plays very well with quicktime, but I downloaded VLC and it works fine now. Thanks again.
To start, I use Mac OSX Mavericks. I have two different computers, a Macbook Pro, and iMac. On my iMac, when I import clips that were captured on a Blackmagic Hyperdeck with the Avid DNxHD codec, I get no audio signal. I can open these clips as a prelude, speedgrade, even in Premiere Pro CS6 and get audio, all on the iMac. I can't even ipmort CC clips in Premiere pro on my Macbook pro, and I've got audio. I uninstalled first pro CC twice and reinstalled. I deleted the folder Preferences. I uninstalled the codec and reinstalled. I've tried three different versions of the codecs from Avid web site. What Miss me?
Welcome to the forums.
Have you tried to update the blackmagic drivers? In addition, please check preferences audio and playback blackmagic is available as one of the incomplete delivery or not.
I am currently working with Adobe Premiere Pro CS3 and after that I have export my project to an AVI or MPEG (does not seem to matter), you can hear the buzz stirred in the background during the entire video.
The audio sounds absolutely perfect everything while listening to him itself, it is only after I export it. This is the first time it happened, I've never had these problems before.
I tried to turn off multiplexing, I tried MPEG2 vs DVD in multiplexing with no difference. I tried MPEG vs PCM as audio format, I tried different frequency, different bitrates, constant or Variable and nothing seems to work. More funny, if I export as a part of the video, the audio seems fine. It is only if I export the entire video I have that noise of snoring, restless in the background. I thought that maybe it is just a file in the project which is the cause, but no matter what part of the video I export, it sounds good... I don't understand.
I have attached an example of my problem in this post... anyone got any ideas?
To Render & replace, select an Audio Clip and choose (Toolbar) Clip > Audio Options > Render and replace. A new Audio Clip will be created and will replace the Audio Clip selected in the timeline panel.
Now, there's these Audio Clips of multiplex Audio & video, files or separate the Audio Clips?
I got a free upgrade for Windows 10 option on my laptop Acer Aspire SW5-011. Everything seemed to work fine, except that I don't bother checking the audio before deleting the files Windows 8... Even if the computer thinks that the Audio drivers work very well that they are not. I have tried everything that I could find online to see if I could get any sound, but nothing has worked. I updated the drivers, kidnapped rebooted and updated the drivers, I tried to find the other acceptable drivers and other follow-up steps. "When I go to reading tab in the sound and click speakers, and then I go to the Advanced tab, the default format said, ' 16 bit, 48000 hrtz ' is grey, I can't click on it and when I try to test it says:"Cannot play testtone" It's as if something prevents me from accessing or it acts like I'm not pregnant? The speaker driver is called "Intel SSD Audio Device. The audio worked fine before downloading. Is it possible to fix my Audio, or to have access to it yet?
Good so I had to update my post because I had to give the good news! However, that is how I am and I almost try everything and tinkering with different things. My audio works now. I went back the download Acer drivers and manual for my camera and I checked under 32-bit Windows 8, which was windows available. I installed my ID which has been deleted before when I had restarted or any number of things, I tried, and then I went in Drivers and installed the Master Installer. I made sure that I extracted all the files before proceeding with the installation. After it restarted my laptop I heard the Windows startup sound and I knew that it worked because I had no sound at all before. Not sure why it worked, but it did! I felt there was some sort of missing file or a compatibility issue, I'm just happy that the program helped master installation. http://us.acer.com/ac/en/US/content/drivers/5687;-; SW5-011 #_ga = 1.21697787.1131678756.1448199856
Well, I ussually press Fn + B to toggle the Audio Beat and Beat icon appear on the screen. But now when I press it, nothing happens, I can't turn it on or off, very annoying. One advise? I use a HP dv7-4296nr, Win7 Ultimate 64 bit
Download and reinstall the Quick Launch Buttons software on the link below.
Once finished reinstalling, restart the computer and check again.
DP - K
After I reinstalled my audio software windows beats is missing. Please help me to reinstall.
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.
I read your post about the Beats Audio and wanted to help!
Have you tried to use Windows Updateto search for the drivers that are compatible with Windows 10? You can consult this site too: products HP - where can I find drivers Windows 10 and software for my model?
If you have problems to install the drivers, you can use the tool on the following site:
It is possible that the drivers are not available for your product. If you're still having problems, try to use back to a previous generation option, in your system settings: HP Notebook PC - upgrade to Windows 10
Once you return to your original operating system, check to see if you encounter the same problem. If this isn't the case, then you can consider holding off on the upgrade of Windows 10 for a few weeks, until what drivers can be updated.
Please let me know if this information has been helpful by clicking the thumbs up below.
Maybe you are looking for
I see on the web site of Mozilla Firefox 8.0.1 is available on the output channel, however, when I check with v8.0.0 updates that Firefox says it is up-to-date. I tried with my user and administrator accounts. I also tried the 'solution' described in
I had my NB550D for only less than a month. I've updated the memory to 2 GB and the Op to Home Premium system, but nothing else. It's on auto update on security issues, and I remained with the McAfee protection which was pre-installed (and paid for a
MI pc to zip, me viene una pantalla azul in Québec ingles me habla crash window there is reinicia solo, can be that? Gracias
Whenever I turn on my computer, I get a message that says: "Error loading C:\WINDOWS\wsP2ro60.dll" the specified module could not be found. What can I do to fix this? System: Windows XP Version 2002 Service Pack 3 Thank you... René
Box and the website to say that the 7 an Iconia is a quad core, but when you open system information about the devices it says it are a core 2. Also the ROM size claims 8 GB but after we all said and need the space. I just wish that companies were a