Problem with the internal drive of the Satellite Pro 100

Similar Questions

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• A few problems with the Satellite U920T-100

  Hi guys,.

  my girlfriend ordered a Toshiba Satellite U920T-100 about three months ago and she had problems with it since. We're not quite sure what causes because they seem to happen randomly.

  The questions are:
  -It starts, but it freezes at the Win8 connection with a blue screen (a rather hot blue, no blue screen of death)
  -It starts not at all, only after a few attempts
  -It will not stop
  -It freezes all by organizing files (for example copy of files from A to B, but not yet large amounts of files)

  New: these questions seem to be completely appearing randomly, I wasn't able to reproduce them in any way.

  Also: WLAN connectivity is really bad.
  The laptop is not able to find networks, while my laptop has no problem with it.
  And when he finds them and connect, the connection be lost - once again: no idea why.

  That surprises me the most, because in tests and comments that I've read that connectivity has been praised everywhere.

  I have reset factory?
  Run through some specific tests?
  Or is is hopeless, because there are so many problems with it?

  I'd appreciate your help!

  Hello

  > I should factory reset it?

  I think you should do that because the issue described can be related to system problems, but also hardware problem (HARD drive for example). The resumption of the factory allows you to check if its software or hardware related problem.

  Usually, all the problems of software (System) could be solved by the recovery process. Hardware problems would continue.

  From my point of view, the recovery of the system is the first step, you should try to solve the problem.
  In case this is not enough, a hardware problem (RAM or HARD disk) is possible, and given that the laptop is still under warranty, I recommend you contact the service to check the unit.

  Hope my advice might help you a bit

• Someone at - it problems with the Satellite Pro C650 battery?

  Any other owners have problems with their batteries?
  Even when completely loaded - then unplugged and not on internet, I get less than an hour out of her life.

  Has been using MS Word in the last few days - and had to plug the laptop in an hour!

  Hello

  We need to change and optimize battery usage settings.
  This is possible in power management.
  You can decrease the screen brightness and can change another option which is located in the Windows 7 power management.

  The point is that the battery depends on its use for laptop and you will still notice different battery due to the use of different software and different settings working time.

• Is it possible to use the port replicator with the Satellite Pro series?

  Hello
  Is it possible to use the port replicator (Docking Stations) for Tecra series laptop with the Satellite Pro series?

  Hello

  No, as far as I know it of not possible to use a port on laptops Satellite Pro Replicator.
  All laptops that support the Port Replicator has a port extension at the bottom of the unit.
  To my knowledge, the Satellite Pro series don t have this port.
  For now only the Tecra and some units Protégé(ie: S100) supports this feature.

• Problem with the Satellite A300D - 14 p

  Hi all!!

  I have problem with games Test drive Ultimate and Need for speed pro street, when I press the button run, don t car, when spending the same time, car will lead, then I run the button, but my car don't stop at the same time, then the car stops! When I play this games keyboard button will stick, but when I work or play other games, my laptop works properly!

  Maybe that's the problem of processor, and I need to update drivers...! What do you think?

  I look at my CP CPU load is 100% the two core, when I play this game!

• Problem with the first pro effects controls

  Hi, Merry Christmas;

  I have a problem with the keys with the opacity effect in the effect controls panel. the following pictures I think make my problem more clear to understand:

  

  The picture above shows that the opacity of the element of gopro correction control is 100% unless I drank too much champagne, or fully visible on the screen!

  I want to do a transition effect showing the raft, which appear in the window of the following image, which is an Indian granary above the Colorado River.

  My video of the attic I zoomed up to the window they give the impression that enter the attic when I arrive at the moment I start, with keyframes to have

  inside of the attic without an opacity of 100% to 0% at the end of the clip attic. Unless the new champagne is very bad for my health and vision, I would then see the river

  and the raft! Well I did not and it gives me nightmares! What is the problem? I add that having a zoom smooth and regular, I used the effect time remapping in the video for attic.

  The clip of attic is just above the clip from gopro correction and he overlapped by the duration of the selected dissolution of the shown in the image below (I could of course use a resolution here, but I want to save money on an additional effect)

  

  Here is the view with the screen and the opacity of the element of attic at 25%. Normally, the clip of the raft must be visible then! the orange-red to the right of the screen is inside wall of the attic!

  
  

  

  Thanks for your suggestions... Claude

  Sorry guys, I found the reason. My fade is too short! I had put 2 "to fade and seems not sufficient due to the element of the upper layer time remapping effect! Sorry for the inconvenience.

  Claude

• The Satellite Pro 6000 motherboard is compatible with the satellite Pro 6100?

  Hello, need information about mainbord...
  Is the the same Satellite Pro 6000 and 6100 mainbord?

  Satellite Pro 6000 belongs to the PS600E series, and it supports the Celeron and PIII-M (Mobile) processor.

  The Satellite Pro 6100 belongs to the series of PS610E and supports the CPU P4 - M (Mobile).

  The two laptops are very similar so eventually Sat Pro 6000 motherboard could enter Satellite Pro 6100.

• Connection problem with the satellite C660 - 24L

  Hello world

  I have a Toshiba satellite c660 - 24L running windows 7 and have had a problem with internet connection in the last two days.

  Marketing, the internet works very well for around a minute and then I lose the connection. The computer says still connected but the network map displays a problem between the computer and the Wi - Fi router. After that restart the internet works fine again, and then disconnects after ~ 1 min.

  A few times, the computer froze, and gave me a blue screen and memory dump, and then a forced restart.

  Computer behaving the same way when connected and disconnected from the mains.

  All other devices will connect to the router talk-talk with no problems.

  Any help is appreciated, thank you in advance.

  Lewis.

  Post edited by: lewlew

  Have you noticed a few problems if you use the local network connection?
  Original Toshiba WLAN driver is pre-installed on your computer?

  To be honest, it is not easy to say why this show is starting to happen so suddenly.
  Try to back up OS to an earlier time using System Restore tool just to see if the problem will still be there.

• Some problems with the Satellite A210 - 11 p

  I bought my laptop Satellite A210 - 11 p in September last year, but over the few months Ive had some problems with it.

  1. it seems to be overheating to the point of not being able to touch the bottom of the laptop whose total stop me use it as a laptop. Is - this usual?

  2. the screen turns off after approximately 2 minutes after the connection.

  3. any ideas where I can buy a new charger?

  Can you help me?

  Thank you
  Mike

  1 could be an accumulation of dust in the radiator. An FSL can remove it for you, or you can blow with a can of compressed air.
  2 power settings? Perhaps the Toshiba Power Saver is set to decrease intensity when loading in the system tray.
  3. I think an ASP can sell you a.

• Several problems with the Satellite A100-569

  Hello comrades toshers :)

  I had a portable 569 a100 in one last catalog can, last month he had to go off for repairs as the continuous screen empty and had to use the power button to shut it down and reboot again, also questions of excessive paging as well as my computer screen with a kind of mini earthquake... then it is gone and back a week and I these problems are still produce , I understand they have installed a new hard drive and a printed circuit board.

  I also noticed that I can't get the toshiba updates more about expansion memory... this laptop is not yet one year old so would appreciate any help this forum may be able to give me.

  I would sound Toshiba first thing tomorrow on the laptop being faulty, also the ease of online security does not recognize my serial number? very strange.

  long live the people

  Hello

  Obviously your laptop, one of the first models comes with the Vista operating system. To be honest, I agree with you on the RAM. 512 MB is certainly not enough. 1 GB is OK, but for me not enough. I recommend you to upgrade the RAM with 2 x 1 GB module. With 2 GB will be the laptop works well.

  The compatible RAM 1 GB module has PA3411U-2M1G part number. Use this number in Google and you'll find enough shops where you can order online.

  Good bye

• Problem with the Satellite A200 and Windows Vista startup

  Yesterday, my laptop had some mistakes and tried to stop.
  He remained on the screen closed for quite a long time, so I decided to push the power button until it turns off.

  When I went to turn it back to the a started going through the normal screens, the Toshiba screen and then the white screen with the Microsoft flag down. At this point, the screen goes completely black and rest that way.

  Through starting initial power cord, light is turned on, the power supply is on the HARD drive light and then when the screen turns white HARD drive light turns off and stays off.

  I tried to do a system repair using the F8 key at startup and it goes into the Advanced Boot Options menu when I select 'Repair your computer', the light of the HARD drive temporarily, I go through the screens and select System Restore, I selected a date a few weeks and then click Next on the screen indicating the (c :)) system disk is ready to be restored then it returns an error -" (c) drive has errors. Windows has detected corruption in the file (c) system.

  You should check the drive for errors before you can restore it "- and at this point, I can only click on the 'check' the drive to find errors, and then click Start, as he chose the option 'Automatically fix file system errors'."

  When I click Start nothing seems to happen just on the same screen, the HARD drive light does not come on at all and there is no internal HARD drive noise. The only way I can get out of this screen is to turn the computer off again.

  If someone is able to help I would really appreciate it!

  Thank you!

  Hi Cazza68,

  Looks like Windows is confused upward

  Can you start Windows if you perform an installation of Toshiba Recovery disk recovery?

• Trouble with the Satellite Pro L300 Ethernet controller driver

  Hello

  I bought a Toshiba Satellite Pro L300 Model (PSLB9A - 064022)

  Put XP Pro/SP2-Having trouble with the Ethernet controller driver.

  I downloaded the driver from the appropriate list (Toshiba support) only network via another PC memory = car lappy

  Realtek_LAN_56861032008_XP.exe

  install
  installed in a folder named c:\ "DELL"-(WHICH can not be move?)
  drivers R86360
  OF this dossier, I do the "setup."

  broad com 440 x - installs as everything is good,
  made just TWO yellow controllers.in etha...
  \
  but isn't she suppose to be integrated realtek 10/100 Mbit / s Ethernet TX.

  Can someone please point me in the right direction.

  Thanks in advance...

  Steve

  Hello

  It seems that the Australian model, try this one:

  http://file.MyToshiba.com.au/file/Download/Resource/File/13002/Realtek_LAN_56861032008_XP.exe

• Problem with the Satellite C850/c850D touchpad

  Hello

  I just bought a PC toshiba laptop c850/c850D this week, and the third day, when I was watching my touchpad mouse with chrome starts to panic.

  I could barely control the mouse with the touchpad, it kept "shooting up" at the top of the screen.
  I rebooted the system to get the touchpad working not all (mouse key on laptop included).
  When I plug in an external mouse via USB, it works very well.

  I tried the shortcuts F5 (turning the touchpad on the laptop market)
  I have the mouse controls. Where the mouse USB and the touchpad is visible. He said only that it works properly, which is obviously not.
  has taken a printscreen: http://i49.tinypic.com/2m4vebt.jpg

  I even went as far as restoring the computer to the factory settings by pressing f8 whilest reboot etc etc.
  The touchpad mouse doesn't always work...

  It works under windows 7.

  Could someone please help me understand how to get my touchpad working again?

  See you soon,.
  Toby

  Post edited by: junction box

  Hello

  The F5 turns the touchpad on and off
  Please check if the touchpad is not disabled.
  You can also visit the Toshiba UE driver page to download the latest driver for touchpad
  The update of the touchpad driver solves many problems of touchpad.

• Problems with the Satellite A665-11Z

  Hi all!

  I have problems with my laptop, the problem occurs for the most part, any time.
  (start cold upwards) on the screen with the AC is plugged and the battery to connect, the laptop stops receiving power and battery light flashes orange. I re plug the AC several times and this until the battery dies

  which gives it a while it stops then when I play a game (Team fortress 2 to be exact or ETS2) play for about 15-20 minutes until the same symptoms recur...

  I replaced the DC Jack inside the motherboard and the problem persists,

  I have baught a new real charger from ebay

  I also have repasted CPU incase of heating, but is not the issue, as it happened on a cold start upward on the screen it just completely cut to connect.

  I also installed windows 7 ultimate sp1 and update all readers
  I just installed windows 8 pro and updates installed etc.

  I removed the battery of the laptop to see if that was the problem, but it still happens, but obviously there is no battery in the laptop just turns off completely without blinking light orange on the sign of the battery

  The battery is weak it holds for 10 minutes at full load, but this isn't the question why the laptop shuts down with the charger because I removed and still...

  anyone has any idea what it is? :(

  Thank you

  I agree with you that isn't related to malfunction of the accumulator.
  The laptop should work correctly even if the battery isn't inserted.
  That's why I think there must be something wrong with the motherboard or the part connected to the mobo

  However, its really hard to talk about possible troublemakers, because he could make almost any part that affect the functionality of the laptop.

  In the case where the motherboard is affected (a kind of power provide electronic malfunction) repair will be expensive affair because the new motherboard is one of the portable computer expensive parties.