Problem with the Macbook, it "goes off" and suddenly crashes

Similar Questions

• When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.

  When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.

  Hey Abdul HamidNagoor,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  If the problem persists, follow the steps in the article.

  How do I recover from a corrupted registry that prevents Windows XP startup

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• I have a problem with the drag (cursor snap) video and audio stuttering!

  I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering.  my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine.  Are there updates or the settings that I can apply to correct this problem?

  http://www.eMachines.com/support/drivers.html

  The latest drivers/software for your machine come directly from eMachines.

  Click the link above for them.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems with the MacBook Pro after the new update, restore or wait?

  I recently upgraded my Macbook with the new update of security El Capitan and I saw that the update is more buggy that is useful. My battery is dying much faster with the same amount of use and my internet constantly disconnects and reconnects if I'm on internet applications. I also found that if I drop something in my computer, the wifi will stop then as well. Should I try to reinstall El Capitan or do I have to wait until the bugs are fixed? (If they will be by apple)?

  Apps can affect the performance of Mac, battery, temperature and fan activity - Apple Support

• I have a problem with the previous results of LEDs and indicators of compensation

  I'm working on a proper VI for my building project, but there is a problem... The project here is to define the occurrence of the error and the error type to decide what actions are required to protect the circuit. This isn't a problem here...

  The problem is when I run the VI for the first time... Everything is good and I got what I need... But when I run it after that... The new results to come out with the results of the first round... So my problem is with the previous results of LEDs and indicators of compensation

  Hope my question is clear and not confusing

  Well, show us a code instead. How do you call the VI?

  Have you tried the option: "properties of the VI... run... clear the flags when called?

• Problems with the windows player video media and internet explorer?

  Original title: Windows Media Player

  I have Windows Media Player 11. I can't play the videos with her. Videos MSN don't is not at all and YouTube loading starts playing and closes exactly 11seconds every time regardless of what particular video. I recently updated my IE 8 browser and tried to use Microsoft Fix it Center Online. It has fixed some problems but not this problem. Any ideas out there? Thanx.

  Hello

  (1) windows operating system you are using?

  (2) have you made changes before the start of this issue?

  (3) what is the exact error message or error code?

  (4) what type of video file you try to play?

  (5) in difficulty he makes you run?

  Step 1: Search for the codecs

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  For reference:

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Resources for the resolution of problems in Windows Media Player

  http://support.Microsoft.com/kb/843509

  According to the problem with the playback of videos in Internet Explorer, try the steps in the following article

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

• Problem with the Menu of Microsoft starting and turning off Legacy USB Support

  I recently bought an Adesso ADP-PU21 active USB-PS/2 adapter. Most of the time it works OK except when the computer wakes from sleep. For troubleshooting I tried to turn off Legacy USB Support in the BIOS of my computer settings just to see if that helped what whatsoever. However, my keyboard does not work until Windows has finished starting when the legacy support is disabled. I can't use the Microsoft boot menu to select an operating system to start. This is the reason why I made this thread to get help with it. I have dual boot between Windows Server 2008 R2 64-bit and Windows 7 Professional 64 bit. Is there a way to fix this, so I can have usb legacy support turned off and continue to use the start menu? I had this problem before, when I tried something else but I don't remember what it was. I hope in any case, there is an alternative for this switching usb legacy support back on. Any suggestions?

  Hello

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• Problem with the Macbook pro 15 "light

  Hello

  I have a macbook pro 15 "of 2011 and yesterday he gave me a failure when you use iMovie and now I'm not able to restart it more.

  When I was with iMovie, the screen became stripped horizontal screen and the computer crashed while I didn't have another option that turn it off by holding down the Start button.

  But since then, when I turn on the computer, it happens to me the following:

  -L' computer starts and the typical sound of departure

  -Then the page from loading with the Apple, but he is seen gray with horizontal lines of fine pink & gray:

  -Once loading appears to be over, the screen turns into a light gray screen and it remains forever. The only option I have is to keep pressed the button start to stop the computer off again.

  I tried resetting the PRAM and the SMC and I walked to the single user Mode to execute the following commands: fsck - fy and mount uw but nothing has worked.

  Also, when I enter in single user mode by pressing cmd + S during startup, the screen is red light with very thin vertical black lines.

  Does anyone has idea what goes wrong with my computer? Can someone help me?

  Thank you much in advance.

  Best regards.

  Your MBP can fall into this category:

  https://www.Apple.com/support/MacBookPro-videoissues/

  Make an appointment at an Apple store genius for VST testing bar.

  Ciao.

• Problems with the MacBook Pro 15 GPU retina

  Hi, I had a lot of trouble with my computer lately. When I run intense jobs GPU, the computer just stops. I managed to work around this problem by changing the settings of my software. The problem got worse and now the computer doesn't turn on. He goes on an infinite loop. I know is a hardware problem because when applying some pressure to the bottom of the computer it lights. Is there a way I can disable by order Nvidia card so at least I can turn on my computer and work?

  Thanks in advance.

  Hello

  That looks like a hardware problem. You must run the hardware Apple (AHT) Test to see if it can find errors with the material.

  You can find instructions here: using Apple Hardware Test - Apple Support

  You will most likely need an Apple Genius appointment at your local Apple store to have this problem.

  Good luck!

• Problems with the Wi - Fi (Airport Extreme and At & t Uverse questions)

  Hello

  We used an Airport Extreme with AT & T Uverse to our network wireless successfully since 2010. Recently Uverse sent me a new modem, and our wireless service has taken a turn for the worse. The network has two different wireless Internet for our House. Please let know us how we can solve this problem. We use a Mac, mac laptop 2, iPad 2 & all Iphones 2 are up-to-date with the latest version of the software.

  Mike

  The AT & T device is a modem/router that provides a signal of wireless network with a name something like ATTa1b3c3d, for example. Your AirPort Extreme also provides a wireless signal by using a wireless network name that you have assigned to the device.

  Thus, it would be normal for you to be able to 'see' the two wireless networks.

  If you don't want to not use the ATT Wireless, just ignore it... or... If you think that it is at the origin of the conflict with the wireless AirPort Extreme, it is possible to turn off wireless on ATT modem/router, so that you only 'sees' the AirPort Extreme network.

  AT & T support can help you in the task of turning off the wireless... or... If you have the number of brand and practical model of modem/router, AT & T, we can try to find an online configuration guide which could provide instructions for this task.

  If you encounter a different kind of problem, please provide details on the problem.

• Problems with the Thinkpad E560 keyboard/keypad and mouse mats

  I bought my Thinkpad around time of December-January, and since there has been some recurring problems.

  On the one hand, with the keyboard, sometimes some of the keys stick: say I'm going to hold the S key and then release, sometimes it keeps acting as if he is still in detention. In addition, the entire keypad has stopped working; at this time last week, it worked perfectly fine, I used to use the calculator, lock the buttons on the internet Explorer and file at the top of the key all the time, but one day they just stopped working. The numbers themselves, as well as the NumLock key and others, also do not work. I tried to reboot, perform analysis, installation of the drivers and all sorts, but without success.

  Finally, with the mouse pad, sometimes sections of it will stop working. As I type this, I can use the right side of my mousepad to move the mouse, but the left side does not work. Sometimes it will change, with the center of the mouse pad does not, while the very right and left mouse do. Usually reinstalling a driver or reboot the computer solves this problem, but it keeps happening and is very frustrating.

  This laptop is a few months old only, I'm not too happy with the problems that keep popping up, and I hope that someone can be useful!

  Thank you

  My mistake! I had completely missed the BIOS update, I installed and fixed this problem. I found it here, if anyone else has similar problems

  http://support.Lenovo.com/GB/en/products/laptops-and-netbooks/ThinkPad-edge-laptops/ThinkPad-E560/do...

• Problems with the installation of windows updates and reboot the computer

  When you try to restart the computer it freezes on "installation updates.do not turn off computer.". Currently have 20 updates which will not be installed. computer says CCC.exe prevents the computer from restarting and getting error code 80240016 when you try to install the updates

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/957307

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, are kindly Error Codes and exactly what happens when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with the selection lasso, quick selection and error messages (saying selection is empty)

  Hello

  I'm trying the sect a person on a picture and paste it into this collage photo, I'm working on that. First I tried to use the quick selection tool, but I guess my man I'm cutting too many colors: when I use the quick selection, it immediately goes into a rectangle around the entire image. I even tried to paint the rest of the picture in black with the exception of humans, but always the same results with the quick selection. Then I tried the lasso, but nine times out of ten, he would stop and do an odd choice. When I finally got a good lasso selection (done after much cursing) then CS6 told me that 'the selection is empty' . What? I made a new layer before I made the selection.

  Can you help me solve these problems?

  I just downloaded CS6 just a day ago and have a lot to learn, but I worked with Paint.net and Paint Shop Pro for the past two years, so I'm familiar with paint and photo editing software.

  Thank you

  Kelly

  [amended to be readable by an admin text]

  Please do not submit your application in green. It's a useless distraction.

  You are trying to make a selection in an empty layer.

  Back to the image of the layer, not the empty one that you created, and you will be able to make a selection.

  Once selected, press Cmd + J to your object selected on a new layer. I think that's what you had in mind.

• Problems with the compatibility of Lightroom 6CC and ElCapitan on older iMacs

  When I upgraded to ElCapitan, Lightroom CC seems to continue to work without problem.  Then I did the first update and since then, I have not been able to use development module in the program.  I posted these problems on the Lightroom forums (see link below), but it is clearly an Apple problem, is not a problem of Lightroom. Lightroom people think it's the graphics processor in the older iMac which poses problem, but as I said above, it happened on the first update, not on the initial installation.  There is now another update on hold, and I fear that other programs will no longer work.  Apple made contact with Lightroom on those very real inconsistencies and what is their consensus?  This is a serious problem for a person using an older iMac and photo editing using Adoble products.  For a fuller discussion, please see the link below for the Lightroom Forum (information was also posted on the Forum from Adobe).

  Information on my version of Lightroom and my computer are in posts on the forum.

  pgrade-Lightroom-CC-2015-3-Camera-Raw-9-http://www.lightroomforums.NET/showthread.php?27159-develop-module-problems-in-u...

  Thanks to anyone who can help solve this problem.

  Should I worry about several incompatibilities with the new pending upgrade to El Capitan?

  FWIW, iMac 24 "early 2009 may have at least 512 KB of VRAM (typical models

  only had 256 K).  The specification of Lightroom CC, minimum is 1 GB of VRAM.

  Operation on this machine was borderline at best and probably just lucky it worked at all.

  In addition, a huge impact on the works of Lightroom is the amount of RAM installed.  With

  El Capitan installed, try to run Lightroom CC with anything less than 8 GB will be

  issue (despite what can say Adobe).

• Having a problem with the message saying (not answer) and computor lock, answers please

  Problem with computor saying "not responding" and lock, any ideas please.

  Problem with computor saying "not responding" and lock, any ideas please.

  Provide you any other information.  You have to give to get when it comes to troubleshooting.

  Given that don't even give you an operating system - replace the defective hardware.  ;-)

  What specific operating system you use?  Include the service pack level and architecture (SP1, SP2, SP3... (32 - bit or 64 - bit?)

  I'm guessing that has happened since the first day - of a lifetime of computers - what happened between he works and does not?  New software installed?  All new hardware installed or attached?

  Did you * nothing * to try to remedy the situation?  If so - what?

  Be specific.  Ignore the cameras, microphones and remote viewing software, we have installed in your home, clothing and computer.  Pretend that we do not understand what you do and save it for future reference.  * smile * (should be easy - we don't have).

  Stuff in general, you could do (as long as you use a Microsoft Windows Operating System after the year 2000...)

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Update your drivers for hardware devices from the manufacturer themselves - do not use the built-in features of Windows. If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.