Problem with the Microsoft wireless keyboard.

Similar Questions

• problem with the Microsoft Wireless Optical Desktop 700 v2 keyboard

  I have a problem when I installed windows xp 64-bit operation. is that it is compatible with the version of xp 64-bit operating...

  Hello

  1. What is the exact problem you are facing with Microsoft Wireless Optical Desktop 700 v2 keyboard?

  Microsoft Wireless Optical Desktop 700 v2 keyboard is compatible with Windows 7 (64-bit).

  See the link below for more information.

  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Microsoft%20Wireless%20Optical%20Desktop%20700%20v2%20Keyboard&v=Microsoft&uid=M7A-00001&l=en-US&pf=1&pi=6&os=64-bit

  If you are facing problems of inadequacy of the response, then you can check the link below to fix the problem.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

• Problem with the Microsoft Wireless Desktop 2000

  I have for 2011. and it works very well until recently. My mouse has stopped responding for a few seconds with the blue light flashing, then returns to work again, and it will be also passed at random.

  the keyboard works fine.

  I tried the sollutions below but no change/fix was filed:

  • Troubleshoot a wireless mouse that does not correctly
  • Failure of the resolution of the function Bluetooth mouse
  • Troubleshoot the incidents of the response to the mouse or wireless keyboard

  -J' have a wireless for the Wifi receiver. but it's far from the receiver box. It shouldn't be confliting with her.

  -My phone is too far, and with telephones connected by usb on the front panel cable, it should not be confliting with it also.

  -New and fresh out of the battery pack.

  Help, please. I don't know what to do.

  Hello

  Clean the mouse? Check the place where blue light emits. Also make sure that the battery
  terminals are clean and not compressed so that the batteries do not have good contact.

  The wireless desktop set must have a three year warranty.

  Wireless Desktop 2000 - support
  http://www.Microsoft.com/hardware/en-us/p/Wireless-Desktop-2000#support

  Microsoft Hardware support
  http://www.Microsoft.com/hardware/en-us/support

  Microsoft Hardware - contact us
  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Microsoft Hardware Warranty Info.
  http://www.Microsoft.com/hardware/warranties.mspx

  The keyboard and mouse are delivered with 90 tech support of day of the 1st incident which would have
  start when you contact Microsoft at the number below.

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 OR 1-800-642-7676 for equipment Ms.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• problem with the Microsoft remote keyboard configuration

  Hi, I just bought Microsoft for XP remote keyboard. I just realized that my computer has a version of Windows Vista (SP2).

  I followed the direction of the guide, to download the update to Media Center and failed.

  (It is said, I need to install "update rollup 1 for eHome Infrared Receiver for Windows XP Media Center Edition", but it does not work!)

  Is it because my computer is running Windows Vista? or do I need to review the various processes to install it.

  Yes, it is specific to Microsoft Windows XP Media Center Edition 2005.

  You don't need this update. If you have a 32-bit version of Windows Vista so I guess it will work. Restart and plug unplug the keyboard. Let the OS to search for the keyboard.

• There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.

  I notice that I need to solve problems for my computer.  The message said: there is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be installed.  One of the options is to reinstall the driver.  I tried, but it did not.  What is this adapter, and how should I do if the error message goes away?

  There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.

  The device information Name: Microsoft Teredo Tunneling adapter ID: ROOT\ * TEREDO\0000 Error code: 10 Reinstall the device driver Completed There is a problem with the Microsoft Teredo Tunneling adapter driver. Reinstall the driver may resolve this issue.

  Problem with the PnP devices Detected

  There are problems with some devices PnP. Windows will take additional steps to continue troubleshooting these devices.

  It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

  To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

  netsh interface set terredo disabled state.
  To re - install

  Click on start. Type Device Manager in the start search box, and then open it. Click the Action tab on top and click Add legacy hardware then click next and next again, he will then scan and find nothing then click on the screen after that. Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it. To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.

• Problem with the microsoft ISATAP adapter.

  Original title: DEVICE DISC

  Hello.

  I continue to told to reinstall the legacy player.

  Problem with the microsoft ISATAP card reader. Do not understand this.

  Myrna Hello,
   
  Thanks for choosing the Microsoft forums.
   
  I would like to know some information about the problem so that we can help you further.
   
  1. What is the brand and model of the computer?
  2. are you on ISTAP adapter yellow exclamation?
  3. are you an error code during the installation of the drivers for the adapter ISTAP?
  4. what he invites you to reinstall the device driver?

  I would suggest trying the following methods and check if they work for you.

  Method 1:
  Uninstall and reinstall the device in Device Manager.
  Steps to uninstall the device:
  1. start.
  2. in the search box type run.
  3. in the Run dialog box, type devmgmt.msc and press on enter key.
  4 locate Microsoft ISTAP peripheral adapter.
  5. right click on the device and select uninstall.
  6 restart the computer so that the changes occur.
   
  Pilots should be re-installed automatically after the computer restarts.
   
  Method 2:
  Try to update the latest drivers for the card and check if it helps, here is the link:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Hope this information is useful. Please let us know if the problem persists, we will be happy to help you further.
   
  Thank you.

• Problem with the microsoft lifecam vx-5000 appication on my windows xp 32-bit

  I recently bought the lifecam vx-5000 and installed the software from the cd provided in the box. The webcam application fails and cannot open. It says that an error has occurred and must be closed. Also, the webcam is not detectable by Skype. I've download the latest version of the software (for my windows xp 32-bit) on the site but the problem still exists. What's not?

  Hello

  Looks like the camera might have a hardware problem or something running is interfering with
  the software and drivers.

  LifeCam VX-5000 - 3 year warranty
  http://www.Microsoft.com/hardware/digitalcommunication/ProductDetails.aspx?pid=014&active_tab=systemRequirements

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  Support for WebCam
  http://www.Microsoft.com/hardware/digitalcommunication/support/default.mspx
  and
  http://www.Microsoft.com/hardware/en-us/support

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ===========

  Also check with Skype and Forums support for known issues with their programs.

  Skype - Support
  https://support.Skype.com/en-us/

  Skype - Forums
  http://Forum.Skype.com/

  ==============================================================

  Use the startup clean and other methods to try to determine the cause of and eliminate problems.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problem with the Logitech Wireless Speaker Adapter

  Hello

  It's been days trying to get my computer, a Dell Inspiron 1721 on Vista, working with the Logitech Wireless Speaker Adapter. There are no instructions to come with the adapter because it was said to be very easy to use, that well is not for me...

  The adapter works via Bluetooth. I can connect to it, but then it doesn't work simply. The adapter is supposed to get a green light when it is synchronized with the computer, but he gets only a flashing green, then turns off. The adapter works as I have tried with a smartphone and it was so easy to do.

  Apparently something to do with A2DP, which does not have Vista. (I'm not an expert, I just repeat what I read on the forums...). If Yes, where can I find?

  Any help is welcome because I am completely lost on this one.

  Thanks adavance

  chikito11n

  There is no instructions to come with the adapter

  You can find the instructions on the Logitech support page. On the left side of this page is a link to the Getting Started Guide pdf which is the instructions.

  chikito11n

  I can connect to it, but then it doesn't work simply. The adapter is supposed to get a green light when it is synchronized with the computer, but he gets only a flashing green, then turns off.

  The flashing green light means it tries to connect and pair, so it can not connect, or it can be connected, but not being able to pair.

  First of all, make sure your laptop is equipped with a bluetooth adapter.

  Then, make sure you have the latest bluetooth driver. Go to the Inspiron 1721 downloads page. In the drop-down list, select Vista. Expand the network category. Find your bluetooth adapter driver and install it if it is newer than your current driver. (These drivers are from 2007, then you probably already have the most recent).

  As the Getting Started Guide Logitech says "refer to the documentation that came with your device for pairing instructions. Dell does not provide these instructions, but they are available on the Microsoft website. However, page this guy has the instructions and screenshots and it is easier to follow than Microsoft. It also explains how to determine whether or not you have a bluetooth adapter and how to configure it to connect to a bluetooth device, then explains how pair or sync in Vista.

  Note that if you enter an access code in the Bluetooth Setup Wizard, the Getting Started Guide says to enter 0000.

• Problem with the Microsoft Digital Sound 80 (DSS80)

  I never had a problem with the DSS80 until recently. If I try to adjust the volume, it it cranks up to 100, and if I cut it 'restores the sound"itself.

  It can work without any problems sometimes, but all of a sudden, he turn the volume to 100. Particularly annoying when watching a movie or listening to music.
  Anyone experienced the same thing, know what causes it to this or have a solution?
  Happy for everything responds :)

  Hi Ayman,

  You might want to take a look at the article to resolve the problem,

  DSS80: How to solve the system of Microsoft Digital Sound 80

  http://support.Microsoft.com/kb/217190

  You can also see the following article for more information:

  Digital Sound System: Windows cannot detect the DSS80 speakers

  http://support.Microsoft.com/kb/220821

   

  Hope this information helps. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Problem with the Microsoft Office 2000 installation program &amp; 2007 &amp; 2010

  Recently used your windows

  Windows XP Professional SP3 integrated October 2012 (32 bit)

  I have a problem with the installation

  Microsoft Office 2000 Premium EN &

  

  Microsoft Office 2010 Professional FR more

  

  

  But MS Office 2003 no problem with him

  and when iam using win 7 32 any desk of installation nprmally

  MS Office 2000 & 2003 & 2007 & 2010 used and installation normally with no prpblems

  Please give me answer or solution

  Thank you

  Just a troubled life

  Have you tried to check and making sure that all the Windows updates were executed? Also you install this on an account with administrator privileges?

• Problem with the Microsoft Lifecam VX-1000

  I have problems with the video quality of the webcam, it is very slow with the delayed and blurry motion. The problem seems to be that on the window of parameters of that bandwidth usb is at least (1) and will not be changed.

  I managed to operate only once by trial and error and plug the cam into a different usb port and the cam worked correctly with a fast refresh picture, also the usb bandwidth went up to 6.

  I downloaded the latest version of the software for this cam but the problem persists, it seems very unstable and crashes easily. I use vista family premium fully updated and all the rest works fine.

  Someone at - it ideas of what could be the cause?

  Thank you

  Hello

  Thanks for your reply, I found that the USB bandwidth seems to be limited on the 1 port, which is part of a panel of memory on my pc card reader. I now use one of the USB ports on the main case for the cam and the bandwidth is only showing 6 and giving a normal pace.

  Also changed the ring on cam for a sharper image.

  I use the latest version of the CAM software and video card drivers.

  After watching in msconfig I found that she was set to selective startup, which i have now changed start normal, although this does not seem to have changed anything, everything works ok as before.

  Thanks for your help.

  Kind regards

  Andywuk

• problem with the mouse and keyboard and windows update does not work

  Since last week to start the computer, I get an error message that the mouse and keyboard functions do not work. He then seeks the errors and then indicates that the service restarts. I want to fix this problem and according to Microsoft hardware, I should download "mkc.msi", which is missing from my computer, but when I do a search for a download, it always automatically directs me to the section "community". How can I correct this problem and get the appropriate download? I use Windows Pro 64 bit with IE 11 on an Acer laptop. I have the Acer site but it was a great help. Also, for the last 6 months, I could not update my computer windows update feature does not work and no error code is presented. I tried everything to restore or re-download the windows update feature, but nothing works, or I can't find a source. I got a blue screen 3 times indicating that windows must be updated and has been the reason for the blue screen. Unfortunately, I don't have a Windows 7 reinstall drive when restarting it spilled about 85 MG of data but not identify what has been dumped. Of course I could use help on this major problem as well even if it cannot be in the category correct community.

  Hello

  I understand that you are having trouble downloading MKC. MSI. I would certainly help you to fix this problem.

  Method 1:

  If you are referring to Microsoft Mouse and keyboard Center, then check out these links to download.

  Download mouse and keyboard Center to get the best out of Windows 8

  Mouse and keyboard Center 2.0 (formerly IntelliPoint and IntelliType Pro)

  Method 2:

  You can consult the following Microsoft article if you are unable to install the updates of Windows on the computer.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• Problems with the Thinkpad E560 keyboard/keypad and mouse mats

  I bought my Thinkpad around time of December-January, and since there has been some recurring problems.

  On the one hand, with the keyboard, sometimes some of the keys stick: say I'm going to hold the S key and then release, sometimes it keeps acting as if he is still in detention. In addition, the entire keypad has stopped working; at this time last week, it worked perfectly fine, I used to use the calculator, lock the buttons on the internet Explorer and file at the top of the key all the time, but one day they just stopped working. The numbers themselves, as well as the NumLock key and others, also do not work. I tried to reboot, perform analysis, installation of the drivers and all sorts, but without success.

  Finally, with the mouse pad, sometimes sections of it will stop working. As I type this, I can use the right side of my mousepad to move the mouse, but the left side does not work. Sometimes it will change, with the center of the mouse pad does not, while the very right and left mouse do. Usually reinstalling a driver or reboot the computer solves this problem, but it keeps happening and is very frustrating.

  This laptop is a few months old only, I'm not too happy with the problems that keep popping up, and I hope that someone can be useful!

  Thank you

  My mistake! I had completely missed the BIOS update, I installed and fixed this problem. I found it here, if anyone else has similar problems

  http://support.Lenovo.com/GB/en/products/laptops-and-netbooks/ThinkPad-edge-laptops/ThinkPad-E560/do...

• Machine E says there is a problem with the microsoft virtual WiFi Miniport Adapter driver

  We changed the BT home hub-2 optical fiber broadband home hub-3. Since that I can't connect to my Epson 600 series printer wirelessley more. When going to add the printer in devices, he showed a problem with my e-machine. Re - install the driver does not solve the problem. any ideas?

  Hello

  What is the operating system installed on your computer?

  Please uninstall and reinstall the virtual WiFi Miniport Adapter and check if it works very well.

  a. press the Windows key + R

  b. in the Run dialog box type devmgmt.msc, and then on enter.

  c. expand network connections.

  d. right-click on wireless connection

  e. click Properties.

  f. click on Virtual WiFi Miniport Driver and click on uninstall.

  g. restart the computer.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Problems with the Microsoft updates do not install it.

  I have a new laptop HP DV6 with Windows 7.  I also have protection of Norton 360 on this machine, as well as the Microsoft Office 2010 beta on this computer.  From the beginning to use the new system, I receive regular automatic update of Windows to download updates; which I host regularly.  The next day, I installed Office 2010 - beta, I got two reviews of next update:

  1. Update for Microsoft Office 2010 file Validation - beta (KB976133), 32-bit expansion
  2 update for Microsoft Works 9 (KB967044)

  The problem I'm having is that when I try to install these updates, I get the following error message for downloads once they do not install:

  CODE 646 Windows update encountered an unknown error.

  None of the available online or troubleshooting fixes seem to work, and automatic update of Windows continues to find and warn me about updates to these 2.  The same problem occurs whenever I try to install downloads.

  Tonight, I got 2 other notice of update as well as the 2 that will not be installed; at the present time, all other updates seems to install just fine. For (at least) one of these updates of the problem seems to be a security update, my system runs into a problem installing them because of the software Norton 360?  Any help you can give me to get these updates installed or quit appearing through Windows automatic updates?

  Thank you

  Marc, please post here for assistance: http://social.technet.microsoft.com/Forums/en-US/office2010/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft