Problem with the monitor Panel and display driver - first Elements 9

Similar Questions

• Problems with the library items and network drives

  I was wondering if there are solutions to the following problem:
  
  I have directories on my laptop that I share through my local network.
  
  On another computer that is connected to the network, I have sites defined in Dreamweaver that point to these shared directories. Elements of model and the library will not update these sites. All sites that are defined on my local drive to update fine.
  
  Any suggestions / solutions are welcome. Thanks in advance. .

  I'm afraid that there are no options.

  The models folder must be at the root of the local site level.

  You can share local sites between several computers the (I do it
  often), but the only files that will be modified are those on the
  * real * local site. Or am I wrong interpret your question?

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  'Mile High Design' wrote in message
  News:eb56ps$40U$1@forums. Macromedia.com...
  > I was wondering if there are solutions to the following problem:
  >
  > I have directories on my laptop that I share through my local
  > network.
  >
  > On another computer that is connected to the network, I defined sites
  > in
  > Dreamweaver that point to these shared directories. Library and
  > Model
  > Articles will not update these sites. All sites that are defined on my
  > local
  > update from the drive fine.
  >
  > Suggestions / solutions are welcome. Thanks in advance. .
  >

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Premiere Pro CS4 - problem with the monitor program.

  Hello. I am not able to solve the problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline panel and read it in the monitor program, vision in the monitoring program is not monitor of race: black or a small part of the picture appear... sometimes changing colors. ASUS P5QPRO Intel 9550 and Sparkle Nvidia GeForce 9800 GTX + 1024 DDR3; directX and the latest gpu driver are installed. Different configurations of Strath discs have been tested. Where I'm wrong?

  Although largely in the max. PrPro range, which is always likely to much larger size than that required. This ARTICLE will give you general information and a workflow possible.

  Coming from the camera, JPEG should be RGB already, so no problems with CMYK.

  Good luck and hope that helps.

  Hunt

• Error message indicating the problem with the monitor of devices in Windows XP.

  Original title: Device Monitor

  Error message indicating the problem with the monitor of devices in windows xp. How to fix?

  Hello

  1. when exactly you receive this error message?

  2. What is the brand and model of your computer?

  3. What is the exact error message that you receive?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.

  I notice that I need to solve problems for my computer.  The message said: there is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be installed.  One of the options is to reinstall the driver.  I tried, but it did not.  What is this adapter, and how should I do if the error message goes away?

  There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.

  The device information Name: Microsoft Teredo Tunneling adapter ID: ROOT\ * TEREDO\0000 Error code: 10 Reinstall the device driver Completed There is a problem with the Microsoft Teredo Tunneling adapter driver. Reinstall the driver may resolve this issue.

  Problem with the PnP devices Detected

  There are problems with some devices PnP. Windows will take additional steps to continue troubleshooting these devices.

  It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

  To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

  netsh interface set terredo disabled state.
  To re - install

  Click on start. Type Device Manager in the start search box, and then open it. Click the Action tab on top and click Add legacy hardware then click next and next again, he will then scan and find nothing then click on the screen after that. Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it. To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.

• Problems with the radial tool and the gradient filter tool.

  I have suddenly problems with the radial tool and the tool filter degraded.  They are turning to my red while selection that the assets and not with the results of the any adjustments.  It is a new issue and out now where

  Does that help? Note that the tool must be active to see the check box.

  

  In addition, another reason, that you do not see it could be that the toolbar is not displayed. The toolbar display switch is to press the letter T.

• Equium L10: Problem with the main battery and battery RTC

  Hello

  I have the Toshiba Equium L10 and it is about 14 months old and I have problems with the battery and how much time it takes after a full charge. I also have problems with the RTC battery and an ERROR 0271: check date and time settings message when I turn on the laptop.

  Regarding the battery, I can fully charge it upward in about 3 hours, but when I start to use it, apparently in the last few hours around one and a half or so and then it needs to be recharged. I can have down for about 40 minutes and then turn it off and come back later or in a day or two. How long should I expect from a fully charged battery?

  About the batttery RTC, it really becomes a pain and I only started to get the message of the ERROR 0271 start-up, in recent weeks. I can charge the battery pack and then leave for a few days, but when I turn it on, I get the message ERROR 0271 on the date and time incorrect. Surely after a full charge, the RTC battery should last longer than a few days?

  The manual says that if the RTC battery is exhausted or becomes weak, you must charge the battery of the CCF for 24 hours, in a different part of this manual indicates between 24 and 48 hours, but how can load you for long when the sections concerning the charging battery pack status after charging the battery you unplug the power adapter because leaving connected will shorten the life expectancy of the Battery Pack. So, how we can charge the battery of the CCF for 24 to 48 hours if we shouldn't leave the AC adapter plugged in once the battery is charged - which is nearly three hours. Suggestions about these problems would be appreciated.

  Besides we all know that it is easy to change the CMOS/RTC battery in your desktop base unit, but is it easy to change in a Toshiba Equium L10?

  Concerning

  Brave0

  Hi Brave0,

  The normal recommendation for the CMOS (RTC) battery is to leave the laptop connected to the power supply at least 12 hours when the main battery is fully charged. The charging circuit is going to hijack the current to the load automatically RTC battery and no current will be forwarded to your main battery.

  Recommendation do not leave the power adapter is plugged in the main battery is fully charged is really only applicable to older laptops that used no batteries Li - ion and therefore they had to be completely discharged before recharging to avoid any effect 'memory' of the battery.

  With modern Li-ion batteries, it is quite safe to leave the battery when fully charged and still power the laptop from the AC adapter. The charging circuit will pass all the battery charge if it is fully charged.

  Kind regards

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen.

  How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?

  It should do.  You use one of the buttons of pen maybe?  Just touching wheels with the pen with no buttons or modifier keys.  Press ENTER to close the selection.

  Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool.  I also use the mouse instead of the Tablet for the selection of cutting edge.  It is a little too uncertain where the point will go when hovering the stylus above the image.

• Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

  Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

  You're apparently talking about Photoshop, so I'll pass this on Photoshop beginners forum.

• Hi, I had problems with the addition of soundtrack to Adobe premiere elements 13. When I add it or drag it immediately comes crashing windows, where says "Adobe Premiere Elements has stopped working". I can add videos with no problems, but cannot add any

  Hi, I had problems with the addition of soundtrack to Adobe premiere elements 13. When I add or drag it happens immediately windows crash, where says "Adobe Premiere Elements has stopped working". I can add videos with no problems, but cannot add .mp3 files.

  I had Windows 8.1, 2.4 GHz, 6 GB of RAM. How to solve this problem?

  Fixed a problem when converting the mp3 file. WAV...

  some poor Adobe Premiere Elements if there is for example simple bug in the software.  Waste of money for this software.

• Problem with the swatches Panel

  There is a problem with my Swatches Panel.

  When I select an object that can be colored in the page, such as a box, I choose a color for it in the swatches Panel. but, the little icon top left of this Panel that normally indicates if the color is applied to the fill or line, is empty. I can click on the arrows swap fill and stroke, near the icon and the fill and stroke will swap; but the icon is empty... just gray.

  Indicators of background and outline in the Panel of colors and the toolbar but displays correctly, however.

  The swatches Panel is displayed correctly when logged in another account.

  I'm on a Mac and tried to screw up the "idcs5_Swatches Panel.mxi" and "idcs5_Swatch Library Panel.mxi" files or not available.

  Is there another file I should try screw up? Could this be a conflict with another program?

  Thank you!

  Have you tried to screw up your general preferences?  Link here...

• Problems with the video card and sound card on Toshiba model #PSLCOU - 02701G

  I bought a new laptop in 2009, and it is a Toshiba, model #PSLCOU - 02701G. After about three months the video card and the sound began to spoil. It's what he does, I can go on U-tube or any web site that has a video to watch like CNN news, etc. What it does is it starts to play and the video and the sound is good and he paused for a few seconds and starts again, new breaks and pauses, starts, pauses, starts. He does it all the time, and I was wondering if you all have any idea whats going on? Help? Help?

  It really sucks when you try to watch the news. Also, I put a CD or DVD into the laptop and it works perfectly. I can watch any DVD or listen to a GREAT Cd.

  How is your network connection?  Sometimes, the system needs to create a cache to store the downloaded information and if the download is not pass quickly enough the system will freeze while wiaiting for download to catch up - not a problem with your sound cards and video, but with the speed of Connection on the website or on the network itself (or your network equipment).  This looks like the case if the DVD and the CD's works fine.  Check your internet connection and try to download the video pages to see if the problem is with all the downloads, or only those on a site.  You can contact your ISP and have them help check you connection and settings and the modem for problems or changes, you can do to improve things. Sometimes happens to me as well in the internet connection runs slower than normal and there is nothing that I can do but wait to accelerate - and it's frustrating.

  You can get in trouble with your device drivers.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you need you to do all you have time to do, but at least the network card, sound card and video card - they can help way beyond simply solve this problem), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.