Problem with the primary dns server, get the error "There could be a problem with one or more network adapters on this computer."

Similar Questions

• Problem "there could be a problem with one or more network adapter on the computer?

  Hi, I just changed my modem, I can't connect to the internet. I can connect to wireless network but not to the internet. When I diagnose, he said, "there could be a problem with one or more network adapter on the computer. I searched the internet but I can't find anything. When I diagnose, I have also seen something on the 'hot spots', but I can't remember it clearly? Any help please?

  Also, when I go to Device Manager network adapters, each of them has WARNING signs except two of them.

  Hello:

  If your laptop is an Atheros AR5007 wireless card, see if installing this driver solves the problem, you have to be able to connect to wireless but no internet network.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

• Windows Media Player stopped being able to rip my CD all of a sudden, get the error message: "Windows Media Player cannot extract one or more tracks on the CD.

  All ripping music CD's, I started advice came saying "Windows Media Player cannot extract one or more tracks on the CD", not allowing not rip me all traces on any CD since it first appeared! I had already ripped off several before CD what happens without any problem, now nothing... Always play the CD no worries, won't just rip, anyone got an answer to this problem?

  Hello

  Were there any changes made on the computer before the show?

  I suggest you to refer to article and change the settings for ripping:

  Change settings for ripping

  http://Windows.Microsoft.com/en-in/Windows-8/change-settings-for-ripping-music

  Let us know if it helps.

• Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server)

  Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server), Internet Explorer browser does not.

  Hi Rachel,

  I understand that when you try to connect to the Internet, you get error "Windows cannot communicate with the device or resource (primary DNS server)", what other issues you are faced with Windows?

  • Using a cable or a wireless Internet connection?

  DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

  I suggest you to follow the methods in this article and check if it helps.
  http://support.Microsoft.com/kb/2779064/en-us

  Let us know if it helps.  If the problem persists, please answer, we will be happy to help you.

• Unable to connect to the wireless network, Windows error cannot communicate with the device or the reaource (primary DNS server)

  Original title: internet connection problem

  Hey,.

  I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:

  1. Windows cannot communicate with the device or the reaource (primary DNS server)

  2. the connection between the Internet and your access point, router or cable modem is broken

  3 problem with access point or wireless adapter

  I think it's an effects of virus or something?  Because yesterday it works really well. How can I fix? Thank you very much

  Hello Hildegard Lydia,

  You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.

  What is the brand and model of your computer?

  Please follow the steps mentioned below:

  Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
  I suggest you try to reset the TCP/IP stack.
  http://support.Microsoft.com/kb/299357

  Method 2:

  I suggest that you refer to the following link:

  Why can't I find a wireless network?

  http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7

  Method 3:

  See the steps in the following link and check:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please an update on the status of the issue to help you further.

• Windows cannot communicate with the device he resourse (primary DNS server).

  Original title: primary dns.

  Help, please

  Windows cannot communicate with the device he resourse (primary DNS server)

  Please help me solve this problem

  If you see a 'FON' signal wifi on your PC and you have signed up to "FON", you should be able to connect to it.

  If you look on your BT router (or router you pay BT for the primary connection) on its homepage it should show something like "State of the Wifi BT. If it is active, you should be a member "FON", if it is not active then you need to register and agree.

  BT has their own support forum if you have not already tried it - https://community.bt.com/

  See the FAQ here - http://www.btfon.com/support to ensure that you are connected properly.

  in particular:

  How can I connect once I connect to the correct Wi - Fi network?

  Once you are connected to the correct wireless network, launch your browser. This should load the Fon login page. Select Fon among the three options on the login page, enter your e-mail address and password and sign in. Launch another browser and you are ready to access the Internet

• Cannot communicate with the device or resource - primary DNS server

  I have problems with my laptop using windows 7.
  I was able to connect to the internet until the 19/08/12 to the evening.   After having been online earlier that evening and closed, I rebooted the computer and found my computer connected to the wireless network but had access to Internet 'No '.
  Network Diagnostics has revealed: "Windows cannot communicate with the device or resource (primary DNS server). I had a full signal strength and I introduced myself to be connected to the network, but there is "no internet access.
  I have several computers and have no difficulty in connection with any other device (computer, video streaming, phone), to the internet through the network, home.
  I tried and am not able to connect wireless or ethernet over any network cable (tried 3 others) but can connect to these networks using other computers, telephone, etc.
  I have not recently installed/uninstalled anything.  System Restore says the last restore as on 15/08/12 point.
  Thank you.

  Hey, I uninstalled McAfee and that solved the problem.  Thanks a lot for the suggestion and encouragement.  I'm back online.

  Thank you again... Success!

• Unable to connect to the internet, the error message ' primary DNS server does not and remote Firewall can block connection.

  Original title: Internet connectivity.

  Internet connectivity.  I can't connect to the internet from the computer at home.  Get the message "primary DNS server is online but doesn't react don't not to connection attempts."  Remote Firewall might be blocking connection.  Name of the filter GUIID mfe is connect-legend-v4.  McAfee Firewall is enabled.  Turned it off temporarily with the same result.

  Hello

  Did you change on your computer before the show?

  Follow the steps mentioned below:

  Method 1:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Try resetting the TCP/IP stack.
  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself

  How to reset the Protocol Internet (TCP/IP)

  http://support.microsoft.com/kb/299357 .
  If the same problem still persists, then try the next method.

  Method 3: update the network driver.
  Steps to update of network driver:
  a. click the Start button.
  (b) in the search box type devmgmt.msc and then press ENTER.
  c. Select the network card device and right click on it
  d. now, select Properties.
  e. in the Properties window, on the driver tab, click Update driver.
  f. after the installation of the updates, restart the computer.
  For more information visit:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly.
  Method 4: Definition of obtaining DNS on automatic

  a. Click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  i. Repeat steps for Internet Protocol version 4 as well.

• When you use network troubleshooting in Windows, get message Windows cannot communicate with primary dns server

  Original Title2: Windows 7 - Internet
   
   
  Original title: can someone help me?
  I use a PC at home with Windows 7.  Whenever the failure at home, I have problems connecting to the Internet. Whenever I try to go on Youtube or another website, I get "Internet Explorer can not display the webpage." Now, my internet and router are configured correctly, then why is what is happening? I ran Diagnostics and got the "Windows cannot communicate with primary DNS server." I tried to reset the TCP/IP settings. It did not work and I did three times! I tried to check the properties of my network when I went to diagnose the problem, he threw some stuff on the property sheets open and close before you reopen the properties. If someone could give a foolproof solution for this annoying internet problem I would really appreciate it. Thank you.

  Hello

  Welcome to the Microsoft community!

  While using the network troubleshooter utility in Windows, you get message that Windows cannot communicate with primary DNS server.

  What is the exact message that you get when you try to check the settings of network domestic?

  I suggest you to change network settings:

  Step 1: change network settings of the router

  a. connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  b. make sure you are in Setup-> basic configuration category.
  c. scroll down until you see "DHCP Server" - if it is disabled, select 'enable '.
  d. enable DHCP if you want, you can change the number that starts the DHCP IP assigning. (This is optional)
  e. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
  f. scroll down and click 'Save Settings'.

  Note: The procedure may slightly vary with different routers. You can see the manual or contact ISP for assistance.

  Step 2: change in the computer network settings

  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Windows cannot contact the primary DNS server

  Troubleshooting after trying to connect HP laptop to the internet, the result was that windows cannot communicate with primary DNS server. How should I do?

  What type of Internet connection you are on, wired or wireless? If you are on a wireless connection, try switching to a wired connection and try the download.

  Click Start, type: cmd

  Right-click on cmd, and then click Run as administrator

  At the command prompt, type the following:

  ipconfig/release

  then

  ipconfig/renew

  then

  ipconfig/flushdns

  leave the command prompt

  Click Start, type: folder

  Press enter

  Delete the contents of the temp folder

  Restart the computer and try to download again.

  If the problem persists, try resetting your router if you are connected to one.

  Turn off the router, unplug it, wait 10 minutes

  Plug it in again, power up once again

  Reconnect the Ethernet cable

• We get an error "there is a problem with the device' while trying to use it on the computer of Windows 8

  Sir... my model of computation used is ASUS Q500A and I also have the problem with my may even of them I also perform step u said in this forum, but may not work... my Windows I have used is windows 8. Please help me tnx

  Separated from -.

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/getting-an-error-theres-a-problem-with-your-camera/9c494984-1178-4C3F-884c-80ac750d3fa6

  Hello

  Thanks for posting your query in Microsoft Community.

  This problem is usually caused due to hardware or driver related issues. I suggest you try to install the latest drivers for the camera on the Asus or Windows Update site and check if it helps.

  If the problem persists, then it would be better to contact Asus for more help on this issue. As this could be a problem with the hardware as well.

  Support from Asus: http://www.support.asus.com/

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• Windows cannot communicate with primary dns server

  Hey everybody.  I have a home network, wired PC, 1 wifi 1.  WiFi works fine.  wired network printers work well, other computers (laptops work fine both wired and wireless.)  I have a PC (VISTA), which now gives me the "windows cannot communicate with primary dns server.  This has happened a couple of times, but a reboot fixed things.  Once I had to change primary dns server from automatic to 208.67.222.222 (who got to this site), it worked.  Now, the same error, but nothing works.  I have tried in both directions between the DNS auto numbers listed here, also, have tried the following:

  ipconfig/flushdns
  ipconfig/registerdns
  netsh interface ip reset reset.log
  netsh int ip reset resetlog.txt

  and had windows try to reset the DNS of countless times.  Nothing works.  The upgrade to W7 eventually will correct this problem?  Another question, my wife insists on the use of AOL software (I know, I know), even if all that she uses to is by e-mail.  She says she loves interface.  A chance that caused this problem?

  Hello

  1. have there been recent changes to the system before the show?

  2. the problem occurs only with specific applications?

  Method 1:

  Follow the link and follow the steps proposed by Shekhar S and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-communicate-with-primary-DNS-server/9043f785-2f4e-4CC1-ADF5-6ba5ca413749

  Method 2:

  Follow the link below and follow the steps. Check if it helps.

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  http://support.Microsoft.com/kb/928233

  I also suggest you to run the command in the command prompt and check where the Windows Vista computer is pointing to DNS and DHCP.

  ipconfig/all

  Post back with the results in this thread.

  Let us know if it helps.

• Cannot communicate with primary DNS server

  Here are the results of my ipconfig/all... I had to type this, since I can't access the Internet on my computer...

  Windows IP configuration

  Name of the host... Jeremiah-PC

  Primary Dns suffix...

  Node type... Broadcast

  The active IP routing... NO.

  Active proxy WINS... NO.

  Search list of DNS suffixes... mshome .net

  Wireless network connection Wireless LAN adapter:

  Suffix the connection-specific DNS: wi.rr.com

  Description: Broadcom 4321AG 802.11a/b/g/draft-n Wi - Fi adapter

  Physical address: 00-21-00-35-87-9D

  DHCP enabled: Yes

  Autoconfiguration enabled: Yes

  Link-local IPv6 address: fe80::h496:a7ac:7393:6101% 11 (Preferred)

  IPv4 address: 192.168.0.100 (Preferred)

  Subnet mask: 255.255.255.0

  Lease obtained: Wednesday, June 30, 2010 11:18:20

  End of the lease: Wednesday, June 30, 2010 14:21:35

  Default gateway: 192.168.0.1

  DHCP server: 192.168.0.1

  DHCPv6 IOOKING: 184557824

  DHCPv6: 00-01-00-01-0F-F7-B2-51-00-1E-68-95-9F-3B

  DNS servers: fe80::8cdd:413f:4008:98 c 5% 11

  192.168.0.1

  NetBIOS over TCP/IP: enabled

  Search list suffix the connection-specific DNS: mshome.net

  Ethernet connection to the Local network card:

  State of the media: Media disconnected

  The connection-specific DNS suffix:

  Description: Realtek RTL8168C (P) / 8111C (P) family PCI-ELISE NIC

  Physical address: 00-1E-68-95-9F-3B

  DHCP enabled: Yes

  Autoconfiguration enabled: Yes

  Card tunnel Local Area Connection * 6:

  State of the media: Media disconnected

  The connection-specific DNS suffix:

  Description: isatap. {363BDFFE-FD5C-4926-B273-605FF6EFEE705}

  Physical address: 00-00-00-00-00-00-00-e0

  DHCP enabled: no

  Autoconfiguration enabled: Yes

  Card tunnel Local Area Connection * 7:

  State of the media: Media disconnected

  Suffix the connection-specific DNS: wi.rr.com

  Description: Microsoft ISATAP #2 adapter

  Physical address: 00-00-00-00-00-00-00-E0

  DHCP enabled: no

  Autoconfiguration enabled: Yes

  Card tunnel Local Area Connection * 11:

  State of the media: Media disconnected

  The connection-specific DNS suffix:

  Description: Teredo Tunneling Pseudo-Interface

  Physical address: 02-00-54-55-4e-01

  DHCP enabled: no

  Autoconfiguration enabled: Yes

  You cannot communicate because you do not have a recognized or primary DNS server configuration.  The configuration of the DNS service is incorrect.  It seems that your DNS server is configured to be your router - but it's hard to say.  You actually don't have even one of those enrolled in the internet connection (if it is not to be found in mshone.net).  I don't know what it should be - that depends on your ISP.  Contact your ISP technical support group and help you set up your system correctly - more precisely settings DNS, but the rest as well as you have on the line and do not let up until you made a good connection.

  I'm sorry, we can not help more, but we need their configuration data to set it up properly.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "Primary DNS server" does not and remote Firewall can block connection

  Original title: Internet connectivity:

  Internet connectivity: My Diagnostics Windows Vista network indicates that Windows has confirmed that the "primary DNS server" is online, but does not respond to connection attempts.  He says that a remoet firewall might be blocking my connection.  He referred to poicy provider:-the names of the filters: Firewall SymNetDrv filter OUTBOUND_TRANSPORT_V4.  How can I find it and set it so I can access the internet?

  Hello

  You can try the following methods and check:

  Method 1:

  You can try to temporarily disable third-party antivirus software and firewall installed on your computer and check if the problem occurs. If the problem is resolved, you will need to uninstall the software and reinstall it back or change the settings and check.

  Note: Be sure to enable the security software on the computer after checking.

  Method 2:

  If you're still having problems, then try these steps and check.

  Let us reset TCP/IP and check.
  To reset TCP/IP stack to go to this article and follow the instructions.
  http://support.Microsoft.com/kb/299357

  Method 3:

  a. Click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  i. Repeat steps for Internet Protocol version 4 as well.

  Hope this information is helpful

• I am trying to download a WOW patch for my computer. I am using Windows 7 Home premium. I get an error message: "could not initialize storage. You may not be allowed to write on the destination path. »

  I am trying to download a WOW patch for my computer. I am using Windows 7 Home premium. I get an error message: "could not initialize storage.  You may not be allowed to write on the destination path. "I'm on my admin account, so I should have permission to play where I want to. I did have this problem before with Windows 7. Is this a problem in Windows?  Y at - it an easy fix?

  Have you tried to manually install the hotfix by clicking on it, and as an administrator?