Problem with the redirection email Yahoo after installation of nine updates

Similar Questions

• Problem with the Canon LBP 1120 printer installation driver

  Hello

  I have a machine running 64-bit vista Home premium. and I have a Canon LBP-1120 printer. This printer is in good shape and I don't want to buy another printer.
  But the problem is that the only driver that there is, is for Vista 32 bit. And when I try to install, I get the error message saying that I need 64-bit drivers.
  I'll be happy even with basic print function because I do not do more printing.
  Looked everywhere on the web... good .no
  A workaround solution would help me a LOT!
   
  I found this, but the link does not work
  [Quote]
  Hello

  There should be a Vista driver for it that will at least at the base
  print function, although it does support all of the features:
  https://winqual.Microsoft.com/hcl/PR...P-1120&OID=191

  [/ Quote]
  Hello
   
  1. are you able to print successfully?

  3. What were the recent hardware changes performed on the computer before the question software ro?
   
  A Windows Vista 64 Bit operating system is compatible in installation of 32-bit drivers. All the 64-bit version operating systems have the ability to run 32-bit applications, but on a version 32-bit operating system, you are limited to only 32-bit software.
   
  According to the information on the website of Canon, Canon provides only the 32-bit drivers for Canon LBP 1120 printer, 64-bit drivers are always expected. To improve assistance to the topic to download driver 64 bit I ask you to contact Canon.
   
  http://www.USA.Canon.com/Cusa/support
   
  Canon LBP 1120 32 Bit drivers
  
  http://software.Canon-Europe.com/products/0000524.asp
   
  For problems with the installation of the printer drivers 32-bit in a 64-bit Vista system, you can go through the resources in the following article and see if it helps:
   
  Error message when you try to add a printer driver 32-bit on a 64-bit print server: "the folder you specified contains a compatible software driver for your device.

  http://support.Microsoft.com/kb/979385

  Please see the link for more information about the issue mentioned.

  Installing the driver for 32-bit and 64-bit platforms

  
  

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/gg463027.aspx
  

  
  

  I hope this helps.

• Problem with the network connection Wireless since installation of win 7.

  I ve just installed Windows 7 last week and no problems until yesterday when all of a sudden my laptop can´t to connect to my wireless network... Strange because my Iphone can't, so it seems like there is no problem with the network.
  And the funny part is that when it detects one network different, other than mine, it connects and works very well!

  I ve tried unplugging the laptop and Wi - Fi connection, but it just says that it can´t to connect to the network... He finds it, but when I click on connect it says only: No..

  What to do?

  Hi KlinzmannFussballspielerin,

  Welcome to the Microsoft Answers community.

  Before you try the procedure below, change the security settings for the firewall at various levels and check if the problem persists.

  I suggest you to update the network drivers.

  Steps to update of network driver:

  1. click on the Start button.

  2. in the search box type devmgmt.msc, and then press ENTER.

  3. Select the network device and right click on it

  4. now, select Properties.

  5. in the Properties window, on the driver tab, click Update driver.

  6. After installing the updates, restart the computer.

  For more information visit http://windows.microsoft.com/en-US/windows-vista/Finding-drivers-What-to-do-when-your-hardware-wont-work-with-Windows-Vista

  To solve your problem, try to turn on network discovery. To do this follow the steps below:

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

  2. click on the chevron to expand the current network profile.

  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To learn more about this feature, please visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

  If the problem persists then I suggest you to reset the network adapter settings. Then follow the steps below

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  2. scroll down to the IP assistance service, right-click on it and select Properties

  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

  4. then click on "Stop" to stop the service from running in the current session

  5. click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP broadcast flag: link: http://support.microsoft.com/default.aspx/kb/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  (How to back up and restore the registry in Windows)

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  1. Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  3. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.

  4. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  5. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  6 right-click DhcpConnEnableBcastFlagToggle, then click on modify.

  7. in the value data box, type 1 and then click OK.

  8. close the registry editor.

  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• problem with the connectivity of customers after mixing several models with WLC 5508 Setup WLAN ap

  Hello

  I have 2 5508 wlc and AP 1130 and 1200 in my test harness.

  Currently, WLAN set is in place and works very well but the customer become a frequent problem with the power of the weak signal same AP is installed very near the place of the customer.

  I have my doubts, if I have a question because I use several models of AP in my set-up?

  How to rectify the same question?

  Some time customer gets limited connectivity, means that they usually get IP also.

  What are all the parameters to check in WLC?

  (1) very difficult for a person on a forum to respond. Check if your AAA server was indeed seen as inactive at the same time for other devices.

  If this is not the case, check the network connectivity between the 2. Maybe packets are lost between wlc and aaa server...

  (2) as I mentioned, it may have nothing to do with clent near or far from the AP. What happens if your DHCP server is not responding to the client? What happens if the dhcp request never reaches the level of the DHCP server for some reason any?

  You must investigate all along path to find out why the customer is not getting an ip address.

  Troubleshooting involves trace of sniffer, debug, client, etc...

• Problems with Hal.dll recognizing multicores after installation of the motherboard

  I'm new to these forums, so I don't know exactly where this issue will...

  So here's the problem: I just replaced my jacked up Intel motherboard with a new ASUS P5G41-M LX2/GB. Before, in my device manager, it looks like "ACPI Multiprocessor" or something along that line, but now, under computer, it just says: "Standard PC". In addition, the "processor" tab does not exist, disappeared somewhere in limbo to replace the motherboard. My taskmanager would simply say that there is a kernel, and not both (and don't ask me to click on the ' show one graph per CPU ", it does not work). When I check my Hal.dll file, instead of saying that Halmacpi.dll was original, I would say it was "hal.dll", the Standard PC. Same thing for the other knrl.exe files. I really don't want to wipe my HD with a system reinstall, because 1. I don't want to lose one of the gigantic piles of stuff, that I worked on the computer and 2. I lost my XP Professional (but has the home edition for some reason any) CD. If you guys need my characteristics:

  ASUS P5G41-M LX2/GB motherboard

  Intel Core 2 Duo E4300 1.8 GHZ

  Windows XP Professional

  NVIDIA GeForce G210 1 GB

  2.0 GB DDR2 RAM

  You have loaded all of the drivers that came with the new MB? Windows should be the CPU as being a multi-core, as soon as it recognizes the new chipset drivers.

  SC Tom
  -There is no such thing as TMI if you request technical support.

• A problem with the Redirection of folders and roaming profiles - Adobe Flash file

  This thread is in relation to a thread started for the Google Chrome browser.  Admins also suggested I have create a post here.  The link to the bug can be found here: http://code.google.com/p/chromium/issues/detail?id=97512

  This is the first post on the forums of Chrome:

  Here students use Windows 7 with redirection folders and roaming profiles.

  When in Chrome (any version) and they try to attach a file to an e-mail or upload a file to a site, a 'Find a file' window appears.  When they try to locate the file on their desktop or document file, Chrome hangs for a minute then prompt a user to enter their credentials. Even with the correct credentials prompt says access denied.

  If a local user without a roaming profile or the folder redirection tries the same thing that everything works as should.

  This problem does not occur in Internet Explorer (all versions) or Firefox (all versions)

  The "Search a file" window that appears resembles that of Windows XP, not the other from Vista or Windows 7.

  I also believe that I have posted here before on this topic, but can't seem to find the problem.

  Basically, right now I tell students not to use Chrome to download or attach data.

  I also confirmed AppData folder redirection to be a default/limitation in Flash Player 11 plugin... but only for Google Chrome built-in version of Flash Player 11 (usually located in the Chrome installation folder).  The version of Adobe (usually located in the Adobe installation folder) do not have this problem for me.

  Fortunately, Chrome allows you to install the version of Adobe if you want. I have disabled the plugin provided with Google Chrome and Google Chrome Frame, and my users were able again to use my Flash application:

  1. Google Chrome: type chrome://plugins/ in the URL
     Google Chrome Frame for IE: enter gcf: topic: plugins in the URL
  2. Click "Détails" to expand the list of plugin
  3. Scroll down to Flash
  4. If you have only one version and it is located somewhere in a folder of Chrome, then disable it, close your browser, reopen it, visit http://get.adobe.com/flashplayer and install the version of Adobe.
  5. If you have several versions, disable the version in the Chrome folder and try to use your Flash application again.

  It worked for me; your mileage may vary...

  Blake

• Problems with the iPad 2 air after 9.3.2

  After updating, I'll have a lot of problems with my iPad.

  Safari and other browsers slow / time out

  The iCloud sporadically backup failure

  Software update check fails sporadically

  Poor overall performance (buffering, etc.)

  After basic troubleshooting, I reset my device complete.  Restore failed several times, but finally went through.  All the problems remain.  The machine had no problem before 9.3.2 - is possible to downgrade or solve this problem?

  I also have 2 Air iPad. I encounter the same problem you have. Maybe Apple will work on this problem on the next IOS updates.

• Problem with the Toshiba product registration after reinstall

  Hello
  I completely reinstalled my laptop.

  Now in the "begruesungscenter", sorry I don't know the English expression of the right and the notifications from Toshiba program says I ve to save my mobile on the Toshiba site.

  But I've already registered my laptop, is it possible to do it again? Or to change an entry in the registry, that the laptop is registered?

  Hello Stephan

  Sorry but described is not a problem and the subject of this thread is really bad. What you use is the recovery image. This recovery image is in fact the factory settings. It is a logic that begins each time after installation of operating own will be the same procedure.

  What you need to do is to interrupt the procedure of registration and complete the installation of the OS. If your laptop is already registered you must not do it again and again. I recommend to disable this automatic boot record (msconfig) or check if you can remove the system.

  Good bye

• Problems with the PC at startup after installing update KB980248

  I'm not computer savvy very so I will try my best...

  A few weeks ago, I ran update KB980248 the next morning, when I turned on the pc it seemed to freeze on the startup screen displays the Dell logo and bottom right, he had the F2 and F12 options. Finally, he went to a black screen and says something to start from the cd or less, was the SATA a bunch of times.

  I was finally able to get the pc to boot, but it took a while... from some things in here, I saw how to uninstall the update and hide. I disabled automatic update settings and everything seems to be ok. However, my husband is updated and now it happens the same thing for another update... I had to boot into safe mode, but then I constantly get the boot to say cd black screen and then comes sometimes with a word on the hard disk and press F1 to continue and another option.

  I talked to a friend who is informed pc and it said to reinstall windows, that something is wrong with the pc because it shouldn't do it for all the updates. I have no problems until I installed the update in the title.

  Should I reinstall windows, or is there a solution?

  Hi Cape_g,

  Your friend has suggested that this should not happen with all updates. I would also recommend to run a re-install/repair of Windows.
  However, you can try to set up the machine in a clean boot state and check what is happening:
  http://support.Microsoft.com/kb/929135

  To perform a repair installation, you can try the following procedure:
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Concerning
  Terminator

• Animate - problem with the duplication of scripts after loop

  Hi all

  I have a problem with button simple script to the first frame. All right when the timeline is playing for the first time. After that when timeline loops and stops again to 0 frame button script is fireing twice, when it performs a loop twice is fireing three times etc...

  Here is my script:

  This.Stop ();

  exportRoot.mc_cta.cursor = "pointer";

  This.mc_cta.on ("click", clickFunc.bind (this));

  function clickFunc() {}

  Console.log ("clicked");

  EB.userActionCounter ("clicked");

  exportRoot.gotoAndPlay (1);

  }

  Anyone any ideas? Where I'm wrong?

  Thank you!

  Kris

  As an alternative to creating multiple variables, you can also work around this problem by simply checking if the listener already exists:

  If (! this.mc_cta.hasEventListener ("click")) {}

  This.mc_cta.on ("click", clickFunc);

  }

  Moreover, you don't need bind() when you use on(). It automatically binds the event handler to the local scope.

  EaselJS v0.8.2 API Documentation: EventDispatcher

• Problem with the command line APEXEXPORT after upgrading to 3.2

  Hello
  
  After the upgrade to 3.1.2 to 3.2 Apex (upgrade went well), I get the following error message when you try to do an export of command-line applications:
  
  Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/apex/APEXExport (unsupported major.minor version 49.0)
  at java.lang.ClassLoader.defineClass0 (Native Method)
  at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
  at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
  at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
  in java.net.URLClassLoader.access$ 100 (URLClassLoader.java:55)
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:194)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:274)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
  at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
  
  Any ideas? It worked perfectly fine before the upgrade... I use Oracle 10.2.0.4 database JDBC jar files.
  
  Thank you
  Matthias Hoys

  Hello

  Machines virtual Java is backward compatible, so you can use the JDBC 1.4 with JVM 1.5 or later without problem, no need to download new classes.

  And Yes, I think that it is best to go directly to JDK1.6... Here I have 1.6 and use the tool to export Apex with the 10g JDBC classes without problems.

  Luis

• uanable to use AKO (Army Knowledge Online) due to problems with the certifacitate security, even after accepting the risks.

  I am familiar with the certificates page when you try to pull up of AKO. Today the attention risk security skipped upward, I pressed the button except add followed to obtain certificate. The window then informed me the site has a valid certificate, but still does not open the site.
  https://www.us.Army.mil/appiansuite/login/login.FCC?type=33554433 & REALMOID=06-000a4cd6-218f-1122-97EA-832f882f0000 & GUID = & SMAUTHREASON = 0 & Method = Get & SMAGENTNAME = $ SM$ 2f723ECL4% 2bJUIHQcnRMBd2KxCCSc % 3d % HP4c7QPYp2KtCVeQ & TARGET = $SM$ http % 3A % 2f % www.us.army.mil%3a81%2fsuite%2fauthenticate.do 2f

  After that I have meet the certificate warning and attempt to get around, I get this message:

  This site offers valid, verified identification. There is no need to add an exception.

  The warning popup still does not allow me to go to the page even after he claims the a valid certificate.

• Problem with the game of content after adding an effect to fly a form like a button

  Hello

  I created 3 shapes like buttons. They are the fly-in on the stage separately, one by one. The problem is that just before they fly-in they pop up for the second half, then disappear and fly-in as it was programmed.

  I discovered, that when 'use as button' option is off, everything is fine. Just fly-in such forms as requested. But what 'use as button' is turned on then Cp behaves as described above.

  None of had similar problem? If anyone of you can replicate it?

  As a workaround you could fly in shape (and not as a button) and then cover it with the same shape as the button when the effect is complete.

  Not very elegant but...

• Problem with the height/width automatic after you apply the effect

  Hey guys,.

  I have a panel that automatically resizes after some other materials is added. All the time there are a scale effect. Whenever I move the mouse over one of these children they zoom in and there, the height and width of the parent container is resized automatically.

  However, I have a button reduce to this one with a Resize effect. I can resize the full container to a size of reduction (for example 40 x 40), but when I resize returns with the same effect, the Panel doesn't do not automatically resizes with added children more.

  I did not define special properties on the Board early, but a property must be different now. It is not "automatic" and the "percentageWidth/height" is not working correctly because this command will cause the Panel stretch the full scene. Any suggestions here?

  Hello

  What effects is usually that they value explicit width and height of an element. This means that before you minimize the container, these values are not defined. When you reduce the container, the explicitWidth and explicitHeight are set. Normally, a provision or a container will size the component with setActualSize() or setLayoutBoundsSize(). It does not lock the component in an explicit state.

  Sometiems after effect of that speech.

  myComponent.width = NaN;
  myComponent.height = NaN;
  

  This will reset the explicit values Nan and force the component available to re-measure and setting page on based on her preferred sizes. In your case, before that happens the effect of reducing

  Mike

• Disabled the HTTPS option in Hotmail and problems with the Windows Firewall, Microsoft Security Essentials and Windows updates.

  Original title: Windows Live Hotmail only opens a new window links e-mail composition!

  I recently put my Windows Live Hotmail account to my default e-mail client in Internet Explorer 8 on my Windows XP SP3 System. Unfortunately, whenever I click on a link to e-mail on a Web page to open a new message, Hotmail tells me, "Sorry, there seems to be a problem with Hotmail right now", and a new/compose message window does not open. I disabled the HTTPS option in Hotmail, which fixed the problem. However, when I went to do a manual update of Windows, I am nailed with a Trojan horse! Apparently, the Windows Firewall and Microsoft Security Essentials have been affected by turning off HTTPS in Hotmail! It's 2012, and it's terribly disappointing that Microsoft only has not ironed out all the imperfections in these services now. If anyone can give me a solution (in simple terms), I would appreciate it!

  Thank you

  Ryan

  Hi Ryan,

  1. you receive messages or error codes when you access Windows updates?

  2. what happens exactly with the Windows Firewall and Microsoft Security Essentials?

  About the update of Windows, the Windows Firewall and Microsoft Security Essentials issues, you may try to launch the FixIt and see if it helps:

  Method 1:

  Resolve security issues to protect and secure Windows automatically

  The problem with Microsoft Windows Update is not working

  Method 2:

  You can also refer to article and perform a full scan on your computer by using the Microsoft Safety Scanner.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  On the Windows Live Hotmail account, you can publish your request in instances of Windows Live to get help:

  http://answers.Microsoft.com/en-us/windowslive