Problem with the sharing printers between WIndows & and Windows Xp
I have a laser printer HP 1150 connected by USB on my computer Windows 7 (Home Premium 64-bit). I want to share with another pc with Xp Pro (SP3), but can not find a suitable printer driver. I read the thread on the sharing of printers and led most of the steps.
My problem is that, although I can see the printer of the xp machine, it requires a driver. I had already installed the drivers from HP and the printer works fine by direct USB connection on the XP machine, but it appears that I need a driver installed on the W7 machine as well - and I can't seem to find one that works.
Any ideas what to do?
Check HP drivers at the link above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://social.answers.Microsoft.com/forums/en-us/w7network/threads
Windows 7 Networking Forum at the link above.
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to / stationed there.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Hello
I ve creates a VLAN on the pix.
In this VLAN, users are allowed to connect only to the Internet. Everything is fine, but when trying to connect with his VPN Client to their company, it has problems... (Outside traffic flow, but no traffic came back.)
Is the only solution for this problem to create a Pool of Nat with public ip addresses, one to one mapping, or is there another solution with a public IP address (NAT on PAT) possible for this problem?
Thanks for your replies.
D.
The problem is that the esp is an IP Protocol, so PAT will not work in this scenario. When the return traffic returns to pix he doesn't know how to get to the inside host. The only way to do this is by adding a static nat (1 to 1 mapping) and create a rule to allow esp. Is what type of vpn client? Microsoft vpn? Cisco vpn? If cisco VPN, perhaps, they can use NAT - T on the vpn that overcomes the question PAT by encapsulating ipsec within UDP packets. You need to talk to the admin VPN and itself it allow.
-kevin
-
Original title: unable to play any DVD
"Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.
I tried to update all the drivers but the problem persists
Hi Neil,
1. have you made any hardware changes or software on the computer before this problem?
2. what version of windows Media Player do you use?
You can follow this link & check if the problem persists.
Windows Media Player Error Message help
Reference: How to troubleshoot issues that occur when you play a DVD in Windows XP?Hope the helps of information.
Please post back and we do know. -
Hello, thanks for reading and helping me.
I try to play a legitimate, belonging to DVD, but Windows Media Player 12 will not play on my computer Windows 7 Professional. The DVD worked a few days ago, but all of a sudden, I get the following error message:
"Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.
I did a lot of research of these forums and on the ' net. Here are the suggested steps I tried without success:
- I tried VLC player. This works. However, rather than use this workaround, I wish to find a solution to my problem WMP/WMC.
- I tried several DVD for years over the last decade. These DVD works on my laptop, also running Windows 7 Professional and the shark 007 codec.
- I uninstalled my Shark 007 codec
- I tried other codecs (K-Lite)
- I assured that the latest drivers are installed on my video card, XFX ATI Radeon 5850
- I tried to uninstall Nero 9
- I tried to use the Windows 7 troubleshooting options:
- > Reading and burning CD, DVD and Blu - ray (no problem)
- > Windows Media Player DVD (no problem)
- > Windows Media Player Settings (detects a problem, wants to restore factory settings, every time, no matter what happens)
- A system restore to a time when the DVD was working did not resolve the issue
- The different links in Microsoft, I found in this forum about this problem do not seem to be useful. There is a link that points to the set-top boxes, but this page just says: "Windows 7 comes with a decoder.
- I assured the latest driver is available by going to "Device Manager", right click on the drive, then click on "update driver software".
- I assured that the latest firmware is installed directly from the manufacturer's website.
- I tried to reset my DRM by renaming the DRM under C:\ProgramData\Microsoft\Windows folder and by going to this Web site to upgrade:http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp?force=1
- I've uninstalled and reinstalled Windows Media Player 12 and Windows Media Center via the function "functionality in Windows.
I would be very grateful if a Microsoft technology could chime. Thanks for your help!
MY COMPUTER:
DVD drive: TSSTcorp CDDVDW SH-S203N ATA Device (Samsung)
Driver: Microsoft 6.1.7600.16384, dated 06/21/2006
Graphics card: XFX ATI Radeon 5850 Black
Motherboard: Gigabyte GA-X58A-UD3R
Processor: Intel i7-920-Intel i7-920, Corsair 6 GB of RAM, ATI Radeon HD 5850, Gigabyte GA-X58A-UD3R, Corsair 800 d case
Hello
Try this free program:
http://www.DVDFab.com/passkey-Lite.htm
Carlos
-
my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).
my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).
================================================
If the uninstallation of software caused the problem... it may be worth trying to
do a system restore to a time before the software has been uninstalled:Windows 7 system restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions -
Problem with the published parameters between the movement of FCPX
Hello
I have a little problem with the settings published between the movement at FCPX.
For some reason, the published parameters have different values within FCPX in movement.
For example, in motion, a parameter is - 187.04 and in FCPX is-0,19. What are the parameters of position for CSOS.
If I try to change this setting in FCPX, the application crashes after 10 seconds or less.
No idea what is causing the problem? I re-edited the effect several times, same result. The software that I use is FCPX 10.2.2 and 10.2 of the Motion.
MOTION
FINAL CUT X
Thank you.
The values that you have published on the move have been compared to this project that you created. The values shown in FCPX are "consistent" with any project that you create. Often, you will see the center screen is 0.5, 0.5. Left and below are 0, right and up are 1.0. Or you could see Center of 0.0 and a range between - 0.5 and 0.5. Sometimes, you will see the numbers on the scale of some sort of percentage (vertical values will be 0-100 [%] and the horizontal will be based on the aspect of the project, for example, horizontal will be between 0 and 177.7778 for a project of 1920 x 1080, etc..) It will depend on the type of object and the parameters associated with what you posted.
If you want to "correct" values in FCPX, you will probably need to rig settings, otherwise, just live with it.
For what is * why * your model crashes FCPX, that will be another reason and not the difference in the numbers. So, can we get more information on the model?
To use specific fonts?
You publish alterations settings?
Anything out of the ordinary?
-
I have a problem with the drag (cursor snap) video and audio stuttering!
I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering. my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine. Are there updates or the settings that I can apply to correct this problem?
http://www.eMachines.com/support/drivers.html
The latest drivers/software for your machine come directly from eMachines.
Click the link above for them.
See you soon.
Mick Murphy - Microsoft partner
-
Sharing printers between Win7 and XP
I'm trying to share a printer connected to my XP desktop with my laptop Win7 and having problems with the drivers.
I talked to Epson and they say that it is only possible to share printers if Win7 is the host and refuse to look at what if this isn't the game to the top. Microsoft doesn't offer any support that you don't pay for, what is the situation? You can share a printer XP welcomed with a Win7 machine?
If your XP system is the 32-bit version and your Windows 7 system is 64-bit, then you might have some problems unless you install a driver 64 bit on Windows 7 system. You can do on this side of the WIndows 7 form creating a port of the form \\xpsystem\printer and 64-bit printer installation. "xpsystem" is, of course, name of your XP system and "printer" is the part of the printer. Brian Tillman [MVP-Outlook]
-
Problem with the new installation of Windows XP on the Satellite A100-259
Hi all!
I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:(1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
(2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
(3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
(4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yetWhenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?
Hello
Seems that there are some problems with the standards of the partitions.
A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
It was very strangeFinally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions. -
Problem with the mode standby in Windows 7
Hello friends,
I have a big problem when Windows 7 updated itself. I have a laptop Toshiba Satellite L505D. When I close the lid, it will automatically 'sleep' mode. Unfortunately, the screen is black and the laptop is still in progress, I have to stop it and then turn. Is it a problem with the driver 'stack '? Please, help me :)
>.. After Windows 7 update itself
How to understand this?
Have you installed the Windows updates or what?Have you tried to restore the OS using System Restore tool and check if the problem persists?
-
Problems with the last update of Windows - XP
My office has recently installed a few days ago most recent Windows automatic updates. I have never had any problem with them until once they have been installed. Now, I am constantly the dreaded BSoD, and my computer not acting is not right. My tv tuner gel to my computer disconnected from the internet after a while to even my mouse not acting pointer is not right (he is not above windows, sometimes only behind them). The Blue Screen of Death appears for a split second, so I have absolutely no time to see what he says.
The error report contains the following:
C:\DOCUME~1\LPLINK~1\Locals~1\temp\WER6c8a.dir00\Mini112609-01.dmp
C:\DOCUME~1\LPLINK~1\Locals~1\temp\WER6c8a.dir00\sysdata. XMLThe error signature:
BCCode: 1000008e BCP1: C0000005 BCP2: 004D004E BCP3: 9EBD4B70
BCP4: 00000000 OSVer: 5_1_2600 SP: 3_0 product: 256_1When I look into the details, he said something about a device driver. But that doesn't help really since everything he ever said whenever I get a "serious mistake." I've done many analyses of virus/malware/spyware (even with the different products as well) and they all find nothing. Which brings me to the conclusion that the most recent updated Windows (23 or 24 November) is what caused my office these problems.
If someone could help please shed some light on this problem it would be greatly appreciated.
Edit: I also noticed that when my computer disconnects from the internet, I have to restart in order to regain access to the network. But when I try to restart, it refused to stop and freezes just my background image. I also have a laptop with XP Professional SP3 on it and I have absolutely no problem with him. It is only limited to my office.
Legrand, I had the same problem and it was driving me crazy too. I tried everything and finally understood the November 25 or 26 update messed up my AVG anti-virus. I deleted via the control panel and did not have a freeze since! I hope you are using AVG, cause if you are, it's probably your answer too. I'll check back here soon to see if this helped you.
-
Problems with the display settings in Windows XP on my acer aspire netbook
Lack of custody of my office and the bottom was always blue. When for example I opened the menu options for DIVX it's all close together and the window is way to big for the screen I can't see all of the screen. Also problems with the connection to my netbook to the TV. It should never be on the screen and I can't understand how difficulty. Any suggestions
Hi CharlesHefty,
1. do you get an error message or error code?
Check the event viewer for the newspapers of the related events that could help us solve the problems:
Procedure to view and manage event logs in Event Viewer in Windows XP
I suggest you try the steps from the following links in the article and see if it helps:
How to solve problems of hardware and software drivers Windows XP
How to configure and use multiple monitors in Windows XP
I hope this helps.
-
Problems with the application mail in Windows 8
Original title * app email windows problem 8
my windows mail 8 app suddenly stopped receiving and sending e-mail, but they are received in the mail from bt
Hi Neil,
Thanks for posting your query on the Microsoft Community.
As described in the question, I understand that you are unable to send and receive emails.
This issue would have occurred due to corruption Mail app.
I need some information to move forward.
1 did you changes to the computer before the show?
2. which email account you set up with Windows mail app?
I suggest you follow the methods to check if it solves the problem:
Method 1: Run the Windows 8 App troubleshooting tool.
This utility automatically solves some issues that may prevent your running applications, including the suboptimal screen resolution and security or incorrect account settings:
http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab
Method 2: Follow the instructions in the link below:
What to do if you have problems with a soft
http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app
I hope this helps. Please let us know the results. We will be happy to help you further.
-
I have a problem with the previous results of LEDs and indicators of compensation
I'm working on a proper VI for my building project, but there is a problem... The project here is to define the occurrence of the error and the error type to decide what actions are required to protect the circuit. This isn't a problem here...
The problem is when I run the VI for the first time... Everything is good and I got what I need... But when I run it after that... The new results to come out with the results of the first round... So my problem is with the previous results of LEDs and indicators of compensation
Hope my question is clear and not confusing
Well, show us a code instead. How do you call the VI?
Have you tried the option: "properties of the VI... run... clear the flags when called?
-
Problem with the video camera of Sony and the computer.
I have a new Dell with Windows 8. No firewire port. I have a sony dcr-trv19 camcorder and a box of mini tapes I want to import. I've used the firewire to import and that worked well.
Someone has found a way to transfer this unit with the conditions described? Windows 8 is not compatible USB streaming. Is Adobe?
Would be very happy to help!
That of why you need to check with camera and computer stores in your area. Kind of specialized
need and those who should have met the question more often. Of course Sony and their forums
can be a good resource.Sony - Support
http://eSupport.Sony.com/Sony - Forums
https://Forum.sel.Sony.com/?XID=M:Showcase:eSupportI hope this helps.Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Maybe you are looking for
-
How to fix unresizeable maximized the window the addon
I'm on Firefox Mac v42. I followed some instructions on resizing windows on El captain and now I have a window of the addon for "DownTheAll" which is maximized to full screen and has no control to resize it. I can move it, but just not resize. Uninst
-
Camileo H30: I can't open .avi using Pinnacle studio 14
Nice day I can't open .avi in my studio from Pinnacle 14 of my Camileo H30 Where is the problem and how resolution? Camileo H30, PC with Win7. Thank you. concerning/MH/
-
Installation of operating system on used Portege 2010
I just bought a 2010 Portege opportunity, which took the hard drive wiped by the previous owner. How to install a new operating system (Windows 2000 Professional)?Can it be done with a card PCMCIA CD player and if so who? (I have a Toshiba no one of
-
Photosmart 7520e: black ink cartridge doesn't work on Photosmart 7520e
Black ink cartridge stopped working. I replaced the cartridge with a new cartridge, HP 564 XL. Used printer clean print head and Align tools. Received message 'alignment failed. Cartiridges are defined for quality parameters' the printer is off g
-
Photosmart HP 7520: ip address for web services is not on the printer properties
Printer is a HP Photosmart 7520, I have this printer is installed on computers laptops HP two and two are running Windows 7 Pro. On one of the laptops (mine), when I click on devices and printers, and then right-click on my default printer that is t