Problem with the startup and the main functions of Council and the mouse

Similar Questions

• Problems with the mouse scrolling

  I have a Microsoft Wireless Mobile Mouse 1000 that I use on my laptop Dell Inspiron N5110 with Windows 7 Ultimate 64 - bit installed on it.

  Recently, the mouse wheel is crazy I've put it down it scrolls to the top, scroll down, done both or nothing. and this only happens when scrolling down, there is no problem of scrolling upward.

  I changed the USB port - in which I put the receiver - the only one directly attached to the motherboard. That gave me minutes of scrolling perfect without problem, but after having tried other ports he went crazy again.

  I tried to uninstall the driver from Device Manager and then put it back, but to no avail (I did for several ports)

  I should note that the problem itself is fluctuating, which sometimes means that the wheel is crazier than others and I tried the mouse on another laptop and the problem does not occur.

  Thanks in advance.

  Original title: Wireless Mouse 1000 - wheel had crazy

  Hello

  You did changes to the computer before this problem?

  I wish that you read the following article and follow the suggestions in the article.

  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091/en-us
   
  Hope this helps, if the problem persists with Windows updates, please get back to us. We are here to help you.

• Problems with the mouse.

  On my Acer desktop / laptop, I can't remember the serial number or anything like that, but there is a touchpad mouse which I never use. I have a USB key with a "mouse in hand" that I use.

  Saturday evening closed pc cause lack of power. Sunday morning I gave him power, and he began.

  But when you go to the screen "" with applications (windows 8.1) started at the right end. Trying to get to the left of the screen I could do with the USB mouse, but when I left hand letting it got automatically to the right again.

  It's lying, that I could not work with applications to the left (or go to the app store or anything.)

  I tried "Control Panel" and click on "programs". All programs has been more than on a single screen.  And I started at the bottom. Try it with the mouse or the "arrow" s goes up, when I let go I come down to the bottom again.

  Anyone here know if mice "touchpad" do something bad?  Or a USB mouse?  Or a sick computer?

  Sorry for my English - computer is English not my best. Hope someone out there can understand and solve my problem.

  PC was purchased June 2014, so I have the warranty, but do not miss my computer for a long time :-)

  Greetings to all

  Peter

  It was my logitech mouse that didn't work

  Bought a new and now all works

  :-)

  Peter

• problem with the mouse and keyboard and windows update does not work

  Since last week to start the computer, I get an error message that the mouse and keyboard functions do not work. He then seeks the errors and then indicates that the service restarts. I want to fix this problem and according to Microsoft hardware, I should download "mkc.msi", which is missing from my computer, but when I do a search for a download, it always automatically directs me to the section "community". How can I correct this problem and get the appropriate download? I use Windows Pro 64 bit with IE 11 on an Acer laptop. I have the Acer site but it was a great help. Also, for the last 6 months, I could not update my computer windows update feature does not work and no error code is presented. I tried everything to restore or re-download the windows update feature, but nothing works, or I can't find a source. I got a blue screen 3 times indicating that windows must be updated and has been the reason for the blue screen. Unfortunately, I don't have a Windows 7 reinstall drive when restarting it spilled about 85 MG of data but not identify what has been dumped. Of course I could use help on this major problem as well even if it cannot be in the category correct community.

  Hello

  I understand that you are having trouble downloading MKC. MSI. I would certainly help you to fix this problem.

  Method 1:

  If you are referring to Microsoft Mouse and keyboard Center, then check out these links to download.

  Download mouse and keyboard Center to get the best out of Windows 8

  Mouse and keyboard Center 2.0 (formerly IntelliPoint and IntelliType Pro)

  Method 2:

  You can consult the following Microsoft article if you are unable to install the updates of Windows on the computer.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• I have a problem with the mouse cursor moving left to right and not conversely when switching between screens.

  Original title: change the direction of the mouse moves from the main screen to the external monitor

  My mouse movements from left to right when moving from one screen to the other, I want that he move right left how do that change

  Hi Jayson Bourne,

  Welcome to the Microsoft community. According to the description of problem cursor mouse moves from left to right and not vice versa when switching between screens. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the mouse?

  I'll help you with this problem. I suggest you follow these methods.

  Method 1: Follow the steps in the article.

  Change the settings of the mouse

  Method 2: Update the latest drivers/software for the mouse.

  Updated a hardware driver that is not working properly

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• Problems with the mouse and the performance in some programs

  While playing through an old game, I open the menu. In the submenu where options are, I don't then click on any one of them with my touch pad or mouse. The little icon lights by detecting that the mouse is over the icon, but it does not click on it. ex-Menu-> solo-> campaign<--This is="" what="" it="" will="" not="" let="" me="" select.="" also="" it="" will="" not="" allow="" me="" to="" click="" on="" desktop="" icons="" which="" is="" very="" confusing.="" i="" can="" scroll="" over="" the="" icons="" same="" as="" the="" menu="" option="" but="" it="" will="" not="" let="" me="" click="" on="" them="" to="" open="" them.="" so="" what="" it="" seems="" is="" that="" i="" can="" get="" into="" folders="" and="" menus="" but="" when="" it="" comes="" to="" actually="" starting="" something="" up="" such="" as="" a="" game="" or="" running="" a="" program="" the="" mouse="" button="" will="" not="" click="" it.="" i="" can="" right="" click="" open="" most="" things="" but="" as="" you="" can="" imagine="" that="" wont="" work="" in="" a="" game.="" if="" that="" make="" sense.="" if="" you="" have="" any="" thoughts="" or="" ideas="" feel="" free="" to="" throw="" them="" out="" because="" i="" cannot="" even="" start="" to="" think="" of="" what="" might="" cause="">

  PS Feel free to send me an e-mail asking questions of system if you think it might help. I am running vista Home premium and have just installed vista service pack 2 for Microsoft update. I believe the problem started about 4-5 days ago when the update and the update for windows defender came around.

  Thank you

  Hello Darko has,

  Have you tried to remove the update that caused this issue again, to see if your mouse goes back to normal?

  Please see the following link for more information on how to do this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  Let know us, thanks! Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problem with the mouse and the network after the upgrade VMware Tools and hardware to virtual machine

  Hello world...

  I just upgrade my ESX 3.5 servers to vSphere 4.1. All this work is very well with the upgrade right now.

  After that, I tried to mise a niveau of VMware Tools and hardware of VM for my virtual machine and the problems started.

  I tried with two different VM (the two Windows 2003) and the problem appears for the two VM.

  I don't want to test another VM of the different operating system now, I'm afraid to go too far with update of Pentecost the problem I have now.

  I tried two VM to be sure that the problem is not only on a virtual machine.

  First of all, the mouse.

  My mouse has jerky movement. The button works, but sometimes I have to click several times to select what I want.

  I tried to uninstall the mouse in Device Manager and reinstall, but not really Pentecost improvement which (buttons works better, but... not so sure).

  Second problem.

  After you restart the server after VMmware tools and hardware virtual machine, the network link not working anymore.

  When I go to my network card configuration, IP settings are reset in DHCP mode.

  If I go again all my IP settings, Windows says:

  The IP address is hidden from the network and Dial-up connections

  folder because it is not physically in the computer or is a riser

  It does not work. If the same address is assigned to both adapters and

  they become active, only one of them will use this address. This may result

  in the incorrect system configuration. You want to enter a different IP address

  address of this adapter in the list of IP addresses for this card in the list

  Advanced IP address in the dialog box

  If I answer Yes to this, I have to enter a new IP address, and of course, this is not what I want to do.

  If I don't answer, the network working again.

  I think it is a strange message but the work of the vSphere maybe network now.

  Anyone have any idea why my work network and mouse as this upgrade after.

  All other VM that is not upgraded so far works great.

  Thanks in advance...

  (1) make sure that your hardware acceleration is safe enough. I got the upgrade down my hardware acceleration several times already.

  (2) sounds like the new drivers for your NIC cards took over and VMware is basically a new card NETWORK for you. Follow these steps to disable it:

  (a) open a command prompt

  (b) type (without quotes): 'set devmgr_show_nonpresent_devices = 1' and press ENTER.

  (c) type (without the quotes): "start devmgmt.msc"

• Problem with the mouse and trackpad

  I bought a MacBook Pro a week ago and am just learning how to use it - took computers from the 1970s, but it's like learning a new language.  New laptop has a memory of 8 GB and 256 GB SSD.

  The touchpad on the laptop is defined the way that Apple prefers - push upward on the trackpad and what is on the screen moves to the top.

  Being very happy with the PC software, I had a life expectancy of the scroll on a mouse wheel to do things in the normal way, but because the creation 'trackpad' and 'mouse' are coupled to the computer, a fixation breaks to another.  I have a Logitech M705 mouse that fits my hand perfectly.  I called Logitech, and even if we got their mouse software installed, it doesn't have a setting to reverse the direction of scrolling.  I found and download software that allows me to "reverse" the scroll wheel button to be and that's what I use now.

  My question is whether El Capitan, or perhaps even Sierra, a tool that allows me to do this without having to use outside software?

  As a follow-up question, can anyone recommend a wireless mouse that is designed to work with the MacBook Bluetooth without having to use a plug in dongle, which takes half of my USB connections?  Preferably something important, which is 'in', not ' under' my hand?

  Hello. Have you tried to navigate to system preferences and the mouse. And uncheck "Natural direction" here.

• I have problems with the mouse on the computer.

  Original title: mouse problems: P

  Hello

  so my friends touch pad stopped working and she asked me to help him in the process called a tech nerd.
  She said that when she plug in a different mouse it works. She and the laptop Acer: Aspire V3 - 471.
  I did some research on the question, but im known for poor research skills. ill keep searching but if anyone knows
  or can help in any way that is very much appreciated.
  Thank you

  A few things to look at:

  1A it was disabled by the keyboard? Most laptops/netbooks computers usually have a keyboard function to activate the touchpad on and outside. On mine its together, but this can vary between brands and models. My Acer classmates (different model to yours) was . There may also be a BIOS option to turn it off, so its worth a quick look, although if he worked and suddenly stopped it is unlikely.

  2 it is in Device Manager? (if a display as icons in the upper-right) (if the display of categories, change icons and repeat)

  It is listed (probably under the mouse and other pointing devices) and work?
  

  If its listed, but disabled, and then click on the [driver] tab. You may need to run Device Manager as 'Administrator' in the opening, then clicking "Run as Administrator".

  If it appears at all, is there any 'other' or 'unknown' devices listed? In that case it probably needs a W7 updated driver installed for it, which should be available on the website of Acer support for your model.
  

  
  

  3 is it listed and enabled in as a "pointer" device tab [buttons]? and if so it is listed as enabled in the [device settings] tab?
  

  
  

  
  

  
  

  
  

  
  

• I have a problem with the mouse on the computer.

  Original title: the mouse is runging autour

  Help

  I can't control my mouse
  He does things on his own

  Hi Zooitje,

  Thanks for posting your question in the Microsoft Community.

  From the descriptions of the question, it seems that you are facing problems with your mouse.

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

  To help you solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer and the mouse?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3. you receive an error code or message?

  I suggest you run the troubleshooter and update the drivers by following the steps in the link below and check the issue.

  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab04

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

  
  

• New iMac, retina - problem with the mouse in Windows 10

  Hello - I have received yesterday my new iMac of retina and transferred the VM Fusion with all the new Mac tips. Everything has gone well so far, but after setting the parameters for the new options of the retina, the mouse doesn't use VM Ware Tools. I reinstalled the tools, but I had no change. Yet the mouse is slow and I cannot leave the window of Fusion as it used to be. For any help or suggestion would be greatly appreciated. Thanks MK

  Please, try the following steps:

  1. remove the existing tools of the VM of the Panel--> uninstall a program

  2. restart your virtual machine and install the VM tools grouped.

  3. If the problem persists, make sure that the preference of mouse in VMware Fusion--> preferences--> game is NOT set to 'always optimize the mouse for games'

  Kind regards

  -Rick

• Problem with the mouse when having double (multiple) monitors follow-up.

  I'll start with the configuration of the computer:

  The OS is Windows 7 Ultimate, 64-bit 6.1.7601, Service Pack 1

  Guest operating system is Windows Server 2008 R2 Enterprise Service Pack 1

  VMware Workstation Version 8.0.0 build-471780

  When I have multiple monitors allowed (the resolution is 1920 x 1080), I can't use the second monitor correctly.  In my setup main monitor is on the right, but the question I have also occurs when the primary monitor is on the left.

  In the screen below, I move my mouse to the center of the title bar and click and hold to drag the window.

  

  In this screen, you can see the outline of the window I am dragging to the left.  My mouse is now located to the left of the screen to the right about to cross the box to the left of the monitor.

  

  You can't see the mouse in the image 3 below, but I'm still it moves horizontally to the left.  The outline of the window, howvever, moves to the right and downwards.

  

  In this image of 4th, it is difficult to see the window is now pretty close at the bottom of the screen to the right, but my mouse is completely to the left.

  

  The last image shows that when I bring my mouse to the right (primary) screen, the window comes up to proper placement.

  

  Another finding is that, so Oh the right browser window and I just move my mouse to the left screen, the mouse will change the pointer and the browser would show the link in the bar which position of the mouse would be poorly determined to be on the right screen on a link in the browser State.

  Everything works fine if I keep just to single screen.

  Thanks in advance for any help on this matter.

  Ed

  OK, I've seen the same behavior with:

  Host OS 64-bit Ubuntu 11.04

  The OS Windows XP SP3 32-bit

  VMware Player 4.0.1 528992 build

  workaround that fixed it was uninstall VMware Tools on the guest (8.8.1 build-528969), reboot,.

  then install again with the host operating system were two connected monitors

  the upgrade of Joueur3 Joueur4, HW comments to 8.0 and upgrade update: tools, everything has been done with a single monitor for the host operating system... maybe something went wrong then.

  Post edited by: Hico

• Someone had a problem with the mouse to apple being too sensitive when you scroll your photos?

  I understand that this is a common problem.  Has anyone what to do for a fix included?

  Click the Apple logo in the upper left corner

  Click on System Preferences

  Choose the mouse and the speed of follow-up and/or scrolling speed slider

• Problem with the mouse

  I have a logitech 570 wireless mouse and it works fine in all other programs, although I did a repair on it and everything seems to work very well.

  In Indesign CS5, after I selected the text tool I can't and then select something else.  No fonts, no nuance and no other tools.  To return to the tool 'selection', I have to select "v" and "esc".

  Can someone help me with this.  I have checked and have all the updates for this program also.

  "Help me Obiwan Kenobi, you're my last hope!

  Dana

  Operating system?

  If it's windows, it's this: panels and InDesign tools answer not to the clicks of the mouse (Windows 7/Vista)

• Problem with the mouse on the video rolling events

  Hello

  I use the following code to display 2 buttons when the mouse passes over the video instance:

  function ShowChan(event:MouseEvent):void
  {
  btnChan1.visible = true;
  btnChan2.visible = true;
  }

  VIDEO1.addEventListener (MouseEvent.MOUSE_OVER, ShowChan);

  But for some reason, it does not.

  PS. I've only worked in ActionScript for about a week so please go easy

  Chris

  If there is no skin, there is no mouse shipped event.  use a transparent button.

• Problem with vaio pro and bluetooth mouse.

  My new Sony Vaio Pro has been disconnected my bluetooth MS sculpt mouse.

  I had to re - connect or even re-install the mouse. Painful!

  It turns out that bluetooth devices is powered via a USB controller

  On the Generic USB controller, under properties, there is a check box selected that allows the computer to "Allow" computer to turn off this device to save power

  I unchecked which and now my mouse works fine.

  Thanks for that. I couldn't work at all with the Pro my bluetooth mouse. Now maybe I can - if I can only find where I put the mouse...