Problem with the Structure of the case

Similar Questions

• Dead pixel blackBerry Smartphones and the problem with the case of my BlackBerry 9780

  Hello world

  Recently, I bought a BlackBerry 9780 by Vodafone Spain (23 December) and I found a few problems.

  One of them is the presence of a dead pixel in the upper right and the feeling of the case a little weak in the left side that, when you touch it you can feel it creaks a bit.

  I would like to know if the warranty of BlackBerry or Vodafone Spain will cover this problem or if some of the new users of this model of BlackBerry noticied some of these problems and knows how to solve this problem.

  Sorry if they have problems with spelling. My usual language is Spanish .

  Thank you very much.

  A dead pixel is a hardware fault, and there is no miracle for her.

  Check if you can get a replacement.

• Problem with the case where the clause

  Hello

  I want to use cases in which clause. I wrote a very simple query to test how it works. However, I always got an error message. Here's what I did.

  Select eid, firstname, lastname from employee where eid = 1 works fine

  Select eid, name, name of the employee

  where

  cases where 1 = 1 then eid = 1

  When 1! = 1 then eid = 2

  end

  I ORA-00905: lack of keyword.

  Did I miss something?

  Thank you

  Jennifer

  Hi, Jennifer.

  Why do you want to use BOX in a WHERE clause?  The wonderful thing about the CASE is that it allows you to do IF-THEN-ELSE logic.  In a SELECT clause, or an ORDER BY clause, this is really useful, but the WHERE clause already allows you to use the IF-THEN-ELSE logic.

  However, if you use the BOX in a WHERE clause, it is as it does nowhere else.  Always BARGAIN instead of a single expression in a SQL data types.  All the clauses THEN (and ELSE, if there is one) must return a single expression, such as the NUMBER.  (There is no BOOLEAN data type in SQL).  So, you can use a CASE statement like this:

  ...

  CASES WHERE

  WHEN 1 = 1 THEN 1

  WHEN 1! = 1 THEN 2

  END = eid

  Here, the CASE expression takes the place of a NUMBER.

  However, if I was not sure if 1 = 1 or not, I would write the condition in this way, without a CASE expression:

  WHERE (1 = 1 AND eid = 1)

  OR (1! = 1 AND eid = 2).

• Problem with the Db link

  Hi Experts,
  
  I am facing a problem with Dblink
  
  AMT OF remote Db
  

  X1 =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = ABC.DEF.COM)(PORT = XXXX)))
      (CONNECT_DATA = (SID = X1)))

  Local Db AMT
  

   
  X2 =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = XYZ.DEF.COM)(PORT = YYYYY))
      )
      (CONNECT_DATA =
        (SID = ELF)
        (GLOBAL_NAME = ELF.world)
      )
    )

  I am able to connect to X 1 with the id user USR & PWD password
  
  However, when I create db link
  

   
  create database link L1
  connect to USR
  identified by PWD
  using 'X1'

  It is created, however when I test, he says the invalid user id and password
  
  Please let me know what I am doing wrong
  
  Thanks in advance
  Kind regards
  
  Published by: 34MCA2K2 on July 11, 2012 08:37
  
  Published by: 34MCA2K2 on July 11, 2012 09:18

  Please refer to this http://lihaobin.com/?p=78

  Maybe a problem with the case-sensitive password

• Problem with the change in value of listbox event

  Hello

  I have a problem with the help of Listbox value change event. The code that I have attached is a simplified version of the largest program, but the problem is the same. One of the loops of Nonna is responsible for handlig occurring events ant the other is responsible for the execution of the program. In the project of oryginal I use a listbox control to determine which plots graphic display of a waveform is visible (first position of the listbox-> only plot first visible etc.). In the attached vi, I just show the current value of the listbox control. The problem is the event runs only once and then the program crashes. I want to be able to change the value of the listbox work both at idle and in State of a program, but when I put the structure of the event in both States, he does not. I'd be very grateful if someone smarter than me could tell me where I made my mistake. I want my program to be able to manage the keys and listbox events in States (slow down and knit) program.

  You have two structures of event in two cases different from the structure of the case, and both are tuned to listbox events has changed. Because only once can be triggered at any time, the VI crashes (lock events the front panel (default) until the event can complement).

  You must use a unique event structure managing all events.

  The overall program architecture looks like inside-out for me.

  For the buttosn, you must use action lock (switch not release!) and use the value changed events.

• Problem with the instruction FOR... Once again!

  Hello world
  
  Well, I'm still doing a slideshow of car using external files and can't see the end. The current movie is here:
  
  http://www.virtuallglab.com/projects.html
  
  I also enclose the code. My problem is I had initially set up an animation with 2 pictures slide with text and then wait 4 seconds before slipping outside, and then next photos and text would slip in and so on, using a setInterval.
  The problem is the loop FOR seems to ignore the setInterval and slides of the 'wait' service, so buckle up just quickly and get to the last picture, so now the example above, it comes the last picture (I = 9) and that's it!
  
  Can you do not include another function in a statement FOR. Or is there a way to tell the loop TO wait for all movement is complete?
  
  Any help greatly appreciated
  
  ***************************************************
  
  Mx.transitions import. *;
  Import mx.transitions.easing. *;
  
  
  for (i = 0; i < 10; i ++) {}
  
  var picLeft = "photos /"+ i + ".jpg"; ".
  var picRight = "pics /"+ i +"b.jpg";
  var txtToLoad = "text /"+ i + ".txt"; ".
  
  this.createEmptyMovieClip("leftHolder",1);
  leftHolder.loadMovie (picLeft, i, leftHolder.getNextHighestDepth ());
  leftHolder._x = - 200;
  leftHolder._y = 15;
  
  var leftTween:Tween = new Tween (leftHolder, "_x", Strong.easeOut, leftHolder._x, 10, 2, true);
  
  this.createEmptyMovieClip("centerHolder",2);
  centerHolder.loadMovie (picRight, i + "b", centerHolder.getNextHighestDepth ());
  centerHolder._x = 180;
  centerHolder._y = 250;
  
  var centerTween:Tween = new Tween (centerHolder, "FLF", Strong.easeOut, centerHolder._y, 15, 2, true ");
  
  Text._x = 600;
  
  myData = new LoadVars();
  myData.onLoad = function() {}
  text.carText.text = this.content;
  };
  myData.load (txtToLoad);
  
  var textTween:Tween = new Tween (text, "_x", Strong.easeOut, text._x, 420, 2, true);
  
  myInterval is setInterval (wait, 4000);.
  
  
  
  function wait() {}
  var leftTweenFinished:Tween = new Tween (leftHolder, "_x", Strong.easeOut, leftHolder._x,-200, 1, true);
  var centerTween:Tween = new Tween (centerHolder, "FLF", Strong.easeOut, centerHolder._y, 250, 1, true ");
  var textTween2:Tween = new Tween (text, "_x", Strong.easeOut, text._x, 600, 1, true);
  clearInterval (myInterval);
  
  }
  }
  
  
  ***************************************************************************************** ***

  There is no way to tell a loop to wait for. This isn't what they are doing.

  All of the loop for runs (if possible and it is not a kind of infinite loop) completely before whenever the image is rendered.

  If you want to spread in time, you must use the setInterval - but not inside a loop for! If you do this, you immediately set, but the number of intervals of your loop. In this case you will also assign IDS for these intervals to the same variable, replacement effectively the value so you won't ever be able to erase most of these intervals.

  That means rethink you the entire structure. Set up a kind of counter and limit like this:

  var slidesToShow:Number = 10;
  var curSlide:Number = 0;

  Then have your setInterval the curSlide increment each time it is called, and check to see if it showed all the. This is where the "loop".

  As for the other part of your question - Yes you are actually two different issues in progress - once again, you can't do a loop for, wait for anything. So no there is no way to pause while you wait for your pre-teen at the end. But you can be notified when a Tween completes.

  See the documentation on the tween class in the help files. You will find the onMotionFinished event. If you configure one of those to begin with everything that needs to be started when the Tween is finished.

  You should also use the MovieClipLoader class to load your images, because you don't know how long it will take to load. Using this class, you get a nice event (onLoadInit) that tells you when the asset is ready for use.

  Finally, I think that you might want to use instead of setInterval setTimeout. It runs only once, whereas setInterval repeat forever. So I think that your algorithm would be something like that.

  1. load creditrice
  2. when ready to animate in and set onMotionFinished Manager
  3. when the query is finished start loading assets and setTimeout for 4 seconds.
  4. when 4 seconds is up or the clip is loaded (no matter what either takes longer) go to 2 and repeat.

  If this is going to be run locally on a hard drive or CD you will have no problem with the length of time that it takes to load external assets, but if it's on the web it's going to take time.

• Problem with the Oracle text markup

  Hello
  
  I have a problem with the Oracle text markup.
  
  I am looking for keywords in a text which is composed by a question and answer.
  Here is the structure of my text:
  & lt; div class = 'question' & gt;
  & lt; a & gt; the title of my question & lt; /a & gt;
  & lt; div class = "reply & gt;
  content of response
  & lt; / div & gt;
  & lt; / div & gt;
  
  It is possible to search those keywords in the question or answer only. For this, I use the stored procedure:
  
  {call CTX_DOC. MARKUP)
  index_name = >?
  textkey = >?
  text_Query = >?
  restab = >?
  query_id = >?
  startTag = >?
  (EndTag = >?)}
  
  _with these parameters: _
  
  index_name = < my index >
  textkey = < id for the search text >
  text_Query = < a query containing the keywords >
  restab = < a table SQL to store the marked text >
  query_id = < id >
  startTag = ' < span class =-"highlight\" >. "
  EndTag = "</span >.
  
  The markup should be done only in the place you want (question, answer, or both).
  The markup is good when I search a keyword throughout the text, in the question or answer only.
  * If I search two key words in the question or answer, the markup is bad *.
  
  _Example: __
  I am looking for the words "* Internet *" in question only.
  Here's the query passed to the stored procedure:
  + * text_query * = 'service & internet' INPATH (//div[@class = 'question'] / has) +.
  
  In the question, these words are well marked.
  In response, only the first word is marked.
  
  * Why the first keyword is also marked in the response while the query specifies a search in question only? *
  
  The same problem appears when I search for the same keywords in the response only.
  In this case, in the answer, these words are marked as well.
  In the issue, only the first word is marked.
  
  Thanks for your help
  
  Edited by: user11088931 Apr 21. 2009 06:17

  Try text_query = (service & internet) INPATH (//div/a)

  Single quotes in a query do nothing. I think that your request has been treated as

  Service & (internet INPATH (//div/a))

• Problem with the iPhone 6 Selfie camera

  

  I have 6 64 gb silver white iphone I am facing a problem with my iphone selfie camere, I recently see the camera gray Crescent front...

  What can I do

  Is there a case on the iPhone? If so, remove it and take another

  photo. If this clears the problem, either set the camera

  hole in your case, or use another case that does not interfere

  with the case.

  If no case or remove the case does not resolve the problem.

  make an appointment on the Apple store nearest to have rated free iPhone.

  Once the diagnosis is made, staff will explain your options.

  Make a Genius Bar reservation

  http://www.Apple.com/retail/Geniusbar/

• Problems with the Smart keyboard (iPad 9.7 Pro)

  I recently bought the iPad Pro 9.7 inches, gray space, Wifi, 128 GB. IOS 9.3.1 of the operating system.

  A few questions that I met in my four days of using the iPad with the Smart keyboard:

  NOTE: the following problems persist despite a technical support call which lasted, I did 2 hours and 30 minutes. I had to restore my iPad settings by connecting to iTunes via my PC to reinstall the last iOS.

  (i) switching applications: if I want to pass, say, from safari to adobe, it is quite easy to do with the keyboard. However, there is an intermittent problem when the apps. When I try to open Adobe when I use safari, the screen of the iPad shows apps that are open as soon as I press the command and tab key.

  What is supposed to happen - I choose to open Adobe, Adobe opens.

  What happens to the contrary - Adobe does not open. Another "X" application that is currently running, opens. It is quite frustrating, because there is no pattern to this. If I use once more the keyboard shortcut to open Adobe, another application 'Y' which is running, open it now.

  In this case, I pointed out, often when the App Store is running.

  (II) command key: sometimes, shortly after I use the shortcut keys to turn on screen shortcut area (pop-up shortcut) - apps, this is supposed to happen if and only if you press and hold down the command key.

  This often happens when I switch to Safari.

  (III) keyboard not responding: a problem that I met today for the first time. My keyboard will not just respond. I had to disconnect and reconnect the keyboard for this function.

  (IV) on which the space key: to wake up the iPad, pressing the SPACEBAR is enough. You don't have to press the home button. Yet, sometimes the space key does not respond and you must use the home button.

  v) Quick app - keyboard shortcut crash switch function causes: if I want to switch from app to app 'X' 'Y', but mistakenly switch to 'Z' app, I immediately want to spend to 'Y '. However, I can't do this in quick succession. I have to wait a second or two before I can switch from 'Y' 'Z' app, otherwise the automatic switching app crashes and you have to wait once more for a second or two before moving on.

  My diagnosis:

  (I) it could be a problem with the smart connector on my iPad. A hardware problem. But it does not explain why the automatic switching app appears and passes correctly but eventually open the wrong applications. Also, it does not explain why the problem is intermittent.

  (II) a software problem. However, that would make me a face 5 questions at once. Sort of. I was surprised that, apart from the question of #3 and #4, there was almost no mention of other issues.

  To restart the iPad or to disconnect and reconnect the keyboard. But I don't think that anyone would be willing to do this 4 - 5 times on a daily basis.

  Update:

  So I used my keyboard all day yesterday without opening the App Store. And guess what? It has been working perfectly. All the above problems I mentioned were not available yesterday. I'll use the App Store today and let it run in the background to see how does my iPad.

• Problem with the search function

  I use firefox 10 and I have a problem with the search feature. If the word that I will try to find begins with the capital letter I can't find with control function if I write the word only with small letters. a the opposite. For example, if the word is 'Letter' I can't find this word if I type 'letter' in the search bar

  Is the option 'Option match case' in the verified search bar? If so, uncheck it.

  • See-> https://support.mozilla.org/en-US/kb/Searching+within+a+page

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.

• Problem with the D-U-N-S: Urgent

  I am trying to register my organization on an Apple Developer program.

  I got a valid D-U-N-S number sent to me by D & B on 2 February 2016.

  However until now whenever I try to register my business using the D-U-N-S number, I get the following error message:

  «The information you entered does not match your profile in the D & B database.» "Before submitting your information to the Organization, get your D & B profile."

  I watched and the profile exists.

  I sent a query to D & B, but we were told to contact Apple directly.

  We have created a deal on the Apple Support and we ardently and desperately waiting for a response.

  Someone from the community can help me on this issue. Please consider as urgent.

  Hello Nabla_business,

  Desperate? You should be aware that Apple is moving at glacial speed on these issues. On the one hand your number DUNS has been created. You must wait 60 days before attempting to create an account. However, it seems that your information has been through to Apple. You will have to wait for the Apple support to constct you. You may need to make repeated through several channels attempts to attract the attention of Apple.

  I had a similar experience. The problem was that when Apple imported data from Dun & Bradstreet, they completely scrambled my address. But I had no problems creating my account so your questions can be worse.

  And I would warn your words "emergency". Apple has a huge backlog of similar problems. In my case, the only way was able to get my problem resolved was when a Technical Support engineer used Apple Remote to go into my machine and then look at the developers own Apple Site. But I had this problem to be solved. I had many other problems with the tax forms.

  My point is that it can take up to a year, in order to get your developer account fully Setup. I suggest you open an account, personal development and test purposes. Be sure to use IDS bundle dedicated to this purpose. This way, when your business is finally set up, then you will be ready to go and become familiar with the process.

• Satellite A660 - message: WARNING: a problem with the cooling system

  My laptop recenly started giving the error "Warning: a problem with the cooling system has been detected." Please turn off computer immediately and return it for service"- Yes the fan had stopped working and touchpad area was hot.

  So I take it on the type of service (toshiba) and must answer for fan, Mo, HARD drive, he said. Is this possible? -J' I have extended warranty, but is ' t it much? not to mention that it takes a month to get things down.

  He also mentioned that I could use the machine with a cooling pad until then if I wish.

  Any feed back?

  > Yes the fan had stopped working and touchpad area was hot.

  In this case, there is really a hardware problem.
  But I m wondering why he should replace the HARD drive and the motherboard
  Perhaps only the cooling module began at malfunction of course this is just a speculation
  If the technician has checked the material, then they need to know what parts are not OK.
  So don t think you have no choice.

  But the guarantee is valid for all is free

• Re: Satellite C650 - problem with the devices connected to USB ports

  Hello

  Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

  The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

  The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
  Thanks in advance

  Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

  Post edited by: leahhw123

  Hello

  What happens with plug n play like USB mouse device?
  You are able to use an external USB mouse correctly?

  > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
  I guess this could be a problem with the software or drivers installed.

  I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

  In addition, you can try to install this software once more, check whether this USB problem appears again.

• Problem with the HP G62 recovery disks

  Hello

  I'm having a problem with the restoration of the operating system on your laptop HP G-62. When I first bought the laptop, I was unable to make the recovery discs, so I ordered recently a few new HP. Because I have installed Ubuntu on the laptop, I wiped it from the disk hard drive used Wipedrive to remove the old Ubuntu operating system I had installed.

  Laptop computer reads the first disc ok and installs the component of windows, but when the screen lights up asking the two disc number it freezes and never installs anything when you try to move anything that used to screen it doesn't matter what and he used to install the second disk. He repeats just 'Please wait '.

  Thank you, Robert

  Hi, Robert:

  I can't help you get the recovery disks to work, but if you can read all 25 characters of the product key 7 windows on the bottom of your PC, you can do your own installation disc 7 windows to reinstall the operating system.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Problem with the screen on IPAD curtain

  Hello

  I'm a bad psychic, and I have a problem with the screen curtain.

  A longitudinal of Voice Over, the screen curtain is automatically activate.

  Normally to turn it off, you must type three times with three fingers. Only on my IPAD when I type three times with three fingers is "saying that turns off or preach. Find it me impossible to disable the screen curtain when voiceover is active.

  The latest version of IOS 9.2.1 is installed.

  I reset the Ipad and nothing changes.

  Can someone help me?

  Thank you

  Is is possible that the zoom is also on your iPad? If this is the case, try to use a quadruple 3 finger tap to turn off screen curtain.

  If the zoom is not active, try:

  1. Possessing the sleep/wake and home button until the Apple logo appears or 15-20 seconds.
  2. If, you can't remove the curtain of the screen, I would advise you reset the settings of the iPad. Settings > general > reset > reset all settings. It will be his turn VoiceOver off, but then you can use iTunes to turn on VoiceOver. Voice-over should return without the curtain of the screen automatically active. IOS - Apple Support using accessibility features

  The of is it possible that zoom is also active your iPad? In this case, you must use a valve 3 quadruple finger pour disable the screen curtain.

  try if the zoom is not enabled:
  1. While holding the button market / sleep and home to ' to the Apple logo, or 15-20 seconds.
  2. If you still can't delete the screen curtain, I recommend to RESET the settings on the iPad. Settings > General > RESET > RESET all settings. This turns off VoiceOver, but you can then use iTunes to turn on VoiceOver. Back to turn voiceOver should without the curtain automatically active screen. Use IOS - Apple support accessibility features

  -AJ