Problem with the Toshiba recovery process

Similar Questions

• Re: Partitioning is a problem with the Toshiba recovery system?

  I'm french, so don't be afraid of mistakes.

  I wonder if I can I repartition my HARD drive I want

  First, I explain what I realized with the FAQ:
  If Vista wouldn't boot, Toshiba Recovery in WinRE (eisa configuration) hidden partition offer we have to fix, and then use the DVD burn or HDDRecovery directory in E: to repair partition.

  My question is if I don't have the DVD (or I lost it):
  If I can I repartition my HARD drive (not the partition recovery, but expand the C: partition to reduce E :) partition without causing problems to recovery?)
  In other words the recovery to the boot partition will update the position of recovering files in E:
  And if it works, can I just copy - paste the E: c: HDDRecovery then E: while I format E:
  Thank you for your answers

  Juju313

  Hello!

  If you copy the folder of disk recovery HARD complete with all the files it should normally work, but I do not know Mr. I had never tried it.

  But if you have the Toshiba disk recovery is on the safe side. So, you can restore the factory settings whenever you want.

  Good bye

• Problem with the Toshiba product registration after reinstall

  Hello
  I completely reinstalled my laptop.

  Now in the "begruesungscenter", sorry I don't know the English expression of the right and the notifications from Toshiba program says I ve to save my mobile on the Toshiba site.

  But I've already registered my laptop, is it possible to do it again? Or to change an entry in the registry, that the laptop is registered?

  Hello Stephan

  Sorry but described is not a problem and the subject of this thread is really bad. What you use is the recovery image. This recovery image is in fact the factory settings. It is a logic that begins each time after installation of operating own will be the same procedure.

  What you need to do is to interrupt the procedure of registration and complete the installation of the OS. If your laptop is already registered you must not do it again and again. I recommend to disable this automatic boot record (msconfig) or check if you can remove the system.

  Good bye

• Problem with the Toshiba bluetooth stack

  Hello, I'm having a problem with toshiba bluetooth stack. I had windows vista installed in my laptop. I decided to upgrade to Windows 7. I got a bluetooth mouse attached to my toshiba bluetooth stack in windows vista. After the upgrade to windows 7 my bluetooth mouse is not working any more and it is not listed in the list of devices. But, when I turn on my mouse, the system battery bluetooth bar turns green as when the device is connected, but it does not work and the device is still not listed. I'm trying to redetect, but it is not detected. I tried to uninstall and reinstall the bluetooth stack, but in the reinstalling my devices are always listed.

  Can someone help me or tell me how to manually remove all connected devices? Thanks in advance.

  You have selected the option to remove all device configurations?
  If not, then please try it and then reinstall the Bluetooth stack.
  You can also do this via command line.
  Just run the following command as an administrator:
  MsiExec.exe /x "{CEBB6BFB-D708-4F99-A633-BC2600E01EF6}" / qn DELETEALL = 1

  In addition, remove the batteries from the mouse for several seconds.

  Right click on the Bluetooth system tray icon > Options... > Security > view paired devices
  Remove your entry for the mouse device when it exists.

• Windows 7 on Satellite A500-1EE - problems with the system recovery

  After five years of good functioning sth went wrong. The system tries to boot but lack access to a device (HARD drive?). And then tries to download files to recover. After downloading the recovery fails and the only option is to shut down the computer. How can I recover this system?

  Recovery process is very simply.
  Did you create the recovery media (DVD)? If so you can use it for recovery image installation.
  Otherwise, you can use HARD drive recovery option (F8 > to fix your computer) and start the recovery image installation.

  Please test F8 option.

  If you have any other questions you are welcome.

• Problem with the Dell recovery and backup system

  Hello

  I have problem with dell backup and restore in my dell laptop (inspiron15). When I select the backup factory option > choose a drive then continues, he said 'Please sustained insert blank to keep media. "
  However, blank disc is already inserted and formatted with the live file system. Please help if anyone has the solution.

  Thank you

  Hello

  Thanks for your reply.

  Usually, the blank DVDs would be already formatted and ready to use as they are writing discs once. Please try to create the backup disk without formatting the DVD.

• Hi, problem with the selection and processing

  I'm having problems with re-sizing any shape using the Selection (V) tool. It did not work properly, I don't know how it has stopped working. Is it possible to fix this?

  Thank you.

  Navid

  Navid,

  Display > display the bounding box?

  CTRL / Cmd + Shift + B to toggle between Hide and Show, one of the regular keyboard mishits.

• Some problems with the execution of process OWB flow

  We have several process flows in OWB. The main process flow called several Sub process flow, for example MAIN_PRF (main process stream) PRF1, PRF2, FRP - 3, PRF4 and PRF5 and the sub process flows.
  
  Each of the 5 process flow run one after the other that is first PRF1, PRF2, next FRP - 3 and so on in the series. A few times when we run the MAIN_PRF main process flow, some of the streams of process gets skipped. For example, it runs PRF1, PRF2, PRF4, PRF5. It ignores the FRP-3. It's very irratic. Sometimes if redeploy us the process flow, it works very well. We do not know what causes this problem. We checked the IDS of transition state and everything seems OK.

  Hello!

  I think I know the problem, sometimes, when you remove and then add a few activities (subpro, cards), outgoing transitions blend. Right-click on your subprocess in your process Editor, click on edit details. Then out of the Transitions.
  You will see the next outgoing transition after execution of this unique process. If sure that the next thing that you want to run the command id 0, sometimes if there is more then one outgoing transition, they get the same value when remove you / add the process.

  You can change the command id by dragging the row up/down in the list.

  Let me know if it resolve you anything.

  See you soon

• Problem with the Vista recovery disc

  I downloaded the neosmart Vista recovery disk.  I also downloaded the iso burner to create a bootable disk.  The first time, I used a DVD to make the bootable disc.  I then went to defective laptop (my dads - will not go beyond the page that is displayed when you stop suddenly).  I went into Setup to make searching the disk first to start.  I inserted the disc and everything works well, but only for the first, a short walk.  It tell me that windows loads the files and I see the bar moving across the screen.  Then I get the screen you see green bars that cross as if its about to start.  Next, I get a screen with a great slider and a small box saying error of Setup.exe.  If I do nothing, nothing happens, if I click OK it starts the whole process.  I decided to try everything from scratch and delete my copy of vista from torrent and re downloaded recovery disk.  I then burned on a CD using the standard iso-burner and exactly same problem again.

  I'm going wrong somewhere or is the computer of my father beyond saving?

  I got Dell fixed in my mind, for some reason any!

  Here is the link to the Forums in XP.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• Re: Qosmio G30-194 - problem with the Toshiba Assist tool

  Hello

  I recently downloaded and installed Assist tool on Windows xp installed costs. The problem is that it does ' t have the same characteristics
  as she had on the old Windows mce system. I think here to optimize the tool to control the work of the cpu (in the tab optimize).
  Help I have now has only the mouse, sd memory card and accessibility features... :/

  Can anyone help with this? See you soon.

  This certainly isn't problem Toshiba Assist. Problem is that you have not installed all other toshiba tools and utilities.
  Toshiba tool is small tool where you can find shortcuts to all other tools so when you install the missing tool, they will be shown here.
  Check it please what lack us and install it.

• Problem with the Toshiba 32SL738F configuration menu

  I can t get into the configuration menu of the TV (model 32SL738F). I have no options to take when I get in the configuration of the remote control. It is possible to have several code (PIN)? I don t know where to go. Thank you

  rontu_florin, depending on the specific English operating manual, the code of universal security (password), (at page 55 in the 'Q & A' section), is * 1276.*

  The factory default security code or password is * 0000 * (i.e. four zeroes)

  I am unable to assist you in how to enter codes if you do not see the options, I suggest you if you enter the menu of English language there might be a possibility that some options that have been hidden can (CAN ONLY!), can be consulted, this was found by another owner, with a different problem , in another thread in this forum.

  _I can only suggest, read the carefully_ manual...

  donhe7

• What are the audio problems with the Toshiba Satellite L305-S5928?

  The Audio on my Toshiba Satellite L305-S5928 jump, when listening to music or movies. It often looks like tearing, or as if it gets stuck.

  Hello

  ·         What operating system do you use?

  ·         Using 32-bit or 64-bit operating system?

  Method 1:

  I suggest you try to use the Audio playback problems troubleshooting to solve the problem. Click on the link below.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2:

  I suggest you update the audio drivers on the manufacturer's Web site see the link below:

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Method 3:

  I suggest to follow the steps outlined in the article below and check if it helps to solve the problem:

  http://Windows.Microsoft.com/en-in/Windows7/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

  See also the link below:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  I hope this helps.

• Problem with the AJAX server process

  Hi team,

  I use APEX 5.0, apex.server.process to update a collection, and this process uses "async = false" (I need it and can't remove that I want to wait for results before the next call is made)

  My code below

  function f_UpdateCollection(v_fixture, v_store)
  {
      apex.server.process
      (
          'UPDATE_FIXTURE',
           {
              x01: v_fixture.checked,
              x02: v_fixture.value,
              x03: apex.item('P46_PARENT_PAGE').getValue(),
              x04: v_store,
              x05: apex.item('P46_PLAN_ID').getValue(),
              x06: apex.item('P46_BU_ID').getValue()
         },
         {
              dataType : 'text',
              async: false,
              success : function(pData)
              {
                   //alert(pData);
              },
              loadingIndicatorPosition:'page'
         }
      );
  }
  
  

  The question is as soon as I put async = False, my loading indicator stops working and the page looks like hanged for about 10 seconds. I want this to work with async = false. If I withdraw this statement, indicator of loading works fine. Can someone Guide, how can I use indicator of loading with async = false;

  Thank you

  Sunil Bhatia

  Hello

  You can collect the values of table and box to pass the application process.

  This way you only call once your process.

  But I'm not well understood what you are trying to do.

  Kind regards
  Jari

• Problems with the re - import processing in Lightroom 5 of the external drive.

  I do not know what question to ask, so I'll explain what I was doing, what I'm trying to accomplish, and how I failed on this point. Several months ago, I moved a few folders to Lightroom from my hard drive to an external drive using the command 'Remove' Lightroom (right click on the file name). (Maybe I should have used the exported file as a catalog rather command.) Now, these files are marked with a "?" next to them, but I still can't view the final version of the image on the back of the hard drive in the library mode. I want one of the folders back into Lightroom so I can re - treat a few photos and re-export. I am assuming that all of my previous changes will be intact. First tried to do this by using the "Add a folder" command by clicking right on the icon "+" adjacent to the list of folders. The files were imported, but not in the original file of the same name folder. I have no idea where these files were imported. Tried to do this again, but Lightroom would not allow me to select the import button, only the cancellation was an option. Then I tried to 'Find the missing folder' by right clicking on the name of the folder in the Lightroom library. I selected the folder on the disk external and "Merged" in the existing file. This resulted in duplicate efforts, but Lightroom still "file not found" so that I can modify it. I watched the Adobe tutorial on importing files from an external drive. I'm puzzled. Use Lightroom 5. Should I have "build" Smart previews initially? Would that 'saved' my changes? #1

  I am assuming that all of my previous changes will be intact.

  Incorrect, remove the photos from Lightroom can cause you to lose your changes. All the other stuff that you tried will not bring back your changes.

  I watched the Adobe tutorial on importing files from an external drive. I'm puzzled. Use Lightroom 5. Should I have "build" Smart previews initially? Would that 'saved' my changes? #1

  Import from anywhere won't bring back your changes. Smart insights will not retain your changes. Leave photos in Lightroom is the way to keep your changes.

  
  

  If you ran out of space, the method for moving photos while preserving your changes and free up space on a disk, is given here: Adobe Lightroom - find folders and files moved or missing

  You have a recent backup of your catalog file, before all of these disorders with respect to your current difficulties, that's happened?

• Satellite A100 - 147 Compression file error with the product recovery disc

  I have Toshiba A100-147, just out of warranty. I tried to recover with a disk, disk unpack to 69% and then I get the message "ERROR READING OF COMPRESSION FILE (1). I have no choice but to click OK in the error message box, and then quit the recovery as she stops running.

  Any help would be extremely welcome.

  Hello

  It looks like a problem with the Toshiba Recovery CD.
  Have you tried to repeat this procedure?

  What of the HARD drive? You format the HARD drive using an original CD of XP MS?
  It s very interesting if a format of HARD drive could allows to perform the installation of the OS since the Toshiba Recovery CD.

  I remember that something like this has happened on my laptop s friend was not able to recover the operating system using the Toshiba CD. Finally, we found that some sectors on the HARD disk has been corrupted. Format drive HARD allowed integer and my friend was able to install the image of Toshiba.
  It's worth a try ;)

  But of course, this error could occur because of the faulty recovery CD.