Problem with the virtual copy exports - JPEG vs DNG

Similar Questions

• Having a problem with the virtual copy...

  .. they used to run right next to the master, but now they are just appearing in the case recently amended. Which button I push to get there, and how to return to their performance in the film strip. I thought that they were stacked, but it wasn't the case.

  Lightroom 4.1 (terrible)

  Cr2 Files EOS 1 Ds Mark III

  Mac OS X 10.6.8

  Intel Core 2 Duo

  Processor speed: 2.8 GHz

  Memory: 4 GB

  122 GB of free space

  Bravo Sir! I'm upward and running, hate photofinishing and treats like this drive me just nuts! Thanks for the reduction of the burden of Stress! :-)

  Dale

• Error - Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Cannot read any DVD.

  Original title: unable to play any DVD

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I tried to update all the drivers but the problem persists

  Hi Neil,

  1. have you made any hardware changes or software on the computer before this problem?

  2. what version of windows Media Player do you use?

  You can follow this link & check if the problem persists.

  Windows Media Player Error Message help

  
  Reference: How to troubleshoot issues that occur when you play a DVD in Windows XP?

  Hope the helps of information.
  Please post back and we do know.

• My laptop is windows 7 and with most of DVD it says that there is a problem with the digital copy. I'm also having trouble changing the region

  the exact message is: "windows media player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card. When I click close it comes with this another message saying that my DVD system is set to the region one and I need to change it to region 2. I have change for the region, but he said: "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. ». I don't know what to do.

  There is a chance that the free VLC Media Player
  would be to read your DVD without changing the region code.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

• I can't play DVDs in Windows Media Player 12 on Windows 7 Pro and get this error msg: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  Hello, thanks for reading and helping me.

  I try to play a legitimate, belonging to DVD, but Windows Media Player 12 will not play on my computer Windows 7 Professional.  The DVD worked a few days ago, but all of a sudden, I get the following error message:

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I did a lot of research of these forums and on the ' net.  Here are the suggested steps I tried without success:

  • I tried VLC player.  This works.  However, rather than use this workaround, I wish to find a solution to my problem WMP/WMC.
  • I tried several DVD for years over the last decade.  These DVD works on my laptop, also running Windows 7 Professional and the shark 007 codec.
  • I uninstalled my Shark 007 codec
  • I tried other codecs (K-Lite)
  • I assured that the latest drivers are installed on my video card, XFX ATI Radeon 5850
  • I tried to uninstall Nero 9
  • I tried to use the Windows 7 troubleshooting options:
  • > Reading and burning CD, DVD and Blu - ray (no problem)
  • > Windows Media Player DVD (no problem)
  • > Windows Media Player Settings (detects a problem, wants to restore factory settings, every time, no matter what happens)
  • A system restore to a time when the DVD was working did not resolve the issue
  • The different links in Microsoft, I found in this forum about this problem do not seem to be useful.  There is a link that points to the set-top boxes, but this page just says: "Windows 7 comes with a decoder.
  • I assured the latest driver is available by going to "Device Manager", right click on the drive, then click on "update driver software".
  • I assured that the latest firmware is installed directly from the manufacturer's website.
  • I tried to reset my DRM by renaming the DRM under C:\ProgramData\Microsoft\Windows folder and by going to this Web site to upgrade:http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp?force=1
  • I've uninstalled and reinstalled Windows Media Player 12 and Windows Media Center via the function "functionality in Windows.

  I would be very grateful if a Microsoft technology could chime.  Thanks for your help!

  MY COMPUTER:
  DVD drive: TSSTcorp CDDVDW SH-S203N ATA Device (Samsung)
  Driver: Microsoft 6.1.7600.16384, dated 06/21/2006
  Graphics card: XFX ATI Radeon 5850 Black
  Motherboard: Gigabyte GA-X58A-UD3R
  Processor: Intel i7-920

  -Intel i7-920, Corsair 6 GB of RAM, ATI Radeon HD 5850, Gigabyte GA-X58A-UD3R, Corsair 800 d case

  Hello

  Try this free program:

  http://www.DVDFab.com/passkey-Lite.htm

  Carlos

• After you have uninstalled an editor audio wave cushion, my DVD stopped playing with the error: because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  ================================================
  If the uninstallation of software caused the problem... it may be worth trying to
  do a system restore to a time before the software has been uninstalled:

  Windows 7 system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• What is the problem with the virtual store for Journ.E

  What is with the virtual store?
  I have a screen wihte, I never see virtual store?
  I think the support is very very bad.

  No one becomes an answer on the question!

  I put t know why Toshiba need so much time to solve this problem.
  Unfortunately, we have to wait until it will be fixed. :(

• Problem with the virtual store to Windows 7 basic, home

  Hello, I have a problem with Windows 7 64-bit home basic e-store. What happened is that I have a program that I use to make small electronic circuits and it was working fine until a few days when I noticed that the design I was doing seemed to be locked - I can open it but I can't open the second tab of the main window, which I should be able to do. After much research I discovered that the problem was caused by the virtual store of Windows - system registers my designs. I need to disable this feature because it prevents me from doing my work. I tried many things including turning off virtual store in REGEDIT and it doesn't change anything. I have another computer with Windows 7 starter and I have no problem there at all. I searched the internet for ideas and found two to this site http://www.askvg.com/how-to-tweak-user-account-control-uac-options-in-windows-vista-home-basic-home-premium/

  In all no joy. Help, please. I would appreciate only the answers that have been tried and tested not something that is supposed to work.

  Thank you, Ed

  (Moved from Windows |) Windows 7 | Performance and Maintenance)

  I have a program that I use to make small electronic circuits and it was working fine until a few days ago.

  Given that things worked fine until a few days ago I would use system restore to set Windows back a week.

• VM hung due to a problem with the virtual processor

  Hello

  Has anyone faced with the following question?

  I use ESXi 5.0. I have several virtual machines run on the ESXi server. There is a virtual machine hung 2 times this month. I had to restart the vSphere Client Console.

  I saw this strange event message in the event tab of ESXi host for this virtual machine:

  Error stack:
  	Click OK to restart the virtual machine or Cancel to turn off the virtual machine. An error has occurred causing a virtual CPU go into the stop State. If this anomaly had occurred outside of a virtual machine, it would have caused the physical machine restart. The stop State are accessible by properly configuring the virtual machine, a bug in the guest operating system or a problem in VMware ESX.

  Thank you!

  tkmanh wrote:

  But only a VM on the ESXi host fails, the ESXi host. The link on the VMware KB States that applies to fail ESXi host.

  That is why I said, «if you don't have a GROUP...» "I gave the article as a reference, because it happens to contain the corrective measures required for Intel BD132 erratum, regardless of the symptoms you are experiencing.  For a complete list of symptoms, please note the following text of the Intel erratum, rather than the text of the article:

  This erratum may result in unexpected errors, an incorrigible TLB error recorded in IA32_MCi_STATUS. MCACOD (bits [0:15]) with a value of 0000_0000_0001_xxxxb (where x is 0 or 1), an accident comments or hypervisor, or other unexpected behavior of the system.

  If you have a PAE enabled in this guest (or any other guest Windows XP 32 - bit on this system), this problem could potentially be the result of this erratum.  Then again, it might be something else entirely.

  In any case if you are at risk of erratum Intel BD132, I suggest you to take the measures recommended in the above-mentioned article.

• Problems with the Audio after export in Premiere Pro CS3

  I am currently working with Adobe Premiere Pro CS3 and after that I have export my project to an AVI or MPEG (does not seem to matter), you can hear the buzz stirred in the background during the entire video.

  The audio sounds absolutely perfect everything while listening to him itself, it is only after I export it.  This is the first time it happened, I've never had these problems before.

  I tried to turn off multiplexing, I tried MPEG2 vs DVD in multiplexing with no difference.  I tried MPEG vs PCM as audio format, I tried different frequency, different bitrates, constant or Variable and nothing seems to work.  More funny, if I export as a part of the video, the audio seems fine.  It is only if I export the entire video I have that noise of snoring, restless in the background.  I thought that maybe it is just a file in the project which is the cause, but no matter what part of the video I export, it sounds good... I don't understand.

  I have attached an example of my problem in this post... anyone got any ideas?

  To Render & replace, select an Audio Clip and choose (Toolbar) Clip > Audio Options > Render and replace. A new Audio Clip will be created and will replace the Audio Clip selected in the timeline panel.

  Now, there's these Audio Clips of multiplex Audio & video, files or separate the Audio Clips?

  Good luck

  Hunt

• Problems with the backup copy

  New time capsule, try to copy the backup to the new airport. Instructions on the Apple Support site seem simple, but I'm missing something. I suspect that this is how I'm connected to the capsule, 99% of the time that it is WiFi.

  Here is the link to the apple site I use for instructions.

  https://support.Apple.com/en-us/ht204078

  I am able to connect the original airport time capsule base by the first 2 steps stations.

  I am able to stop the back-ups on the time capsule original airport

  I am able to complete steps 1-3 on "copy backups it to the new airport Time Capsule"

  However, I have no idea what step 4 ways.  After step 3 in the finder window, I see a yellow folder called data.  If I double click on data, makes that step 4 complete?  If I double click on the data of the finder window is titled 'data' at the top in the Center, but there is nothing in the main window (name, date modified, etc.)

  'Step 4 Mount airport Time Capsule original volume in the Finder by double-clicking'

  So if that is correct, and I go to step 5, 6 and 7, I end up with the same thing on the new airport tc finder window.

  I do not see that anything that is called a backup disk image to drag on.   I don't know what I'm missing.  The only thing I think it's that I'm connected to the CT via wifi or Ethernet cable, which is connected.  (I have an Ethernet cable connected directly from my time capsule org on my mac.  "But I do not have the active wifi, I do not see my tc).

  I don't see a green light on my LAN port on the time capsule. This tells me that even if it is connected, it does not work. I tried searching through the support of apple for solutions.  But there must be an easy way to get to work without being a guru of Ethernet network.

• Problem with the color when exporting to other Adobe programs

  Hello

  When I uses 32 bits per layer in my After Effects to get the really nice glow effect and make everything look OK, but when I use the Dynamic Link for Premiere Pro and then try to make my sequence with Media Encoder deferential eye colors inside After Effects.

  Is there a problem with 32-bpc and dynamic link, or I do something wrong?

  Editing programs do not operate in 32bpc, even if PR calculates the effects in 32 bits. This has to do with the range and models of different colors. Usually 32bpc also requires correct color calibration and conversion via LUTs or profiles from your computer screen is not initially 32bpc. This being the case and to avoid the problems of conflicting settings and hardware acceleration (which is also used for color management), in such situations, it is better to make the file and import it in first. Otherwise, you have work major reading and configuration to do.

  Mylenium

• Problem with the virtual drive.

  On my g6 Pavilion, I get the full message e: HP_TOOLS road.   It is a virtual drive on my pc, how do I deploy using DISKPART to BACK?

  Thank you

  Tom

  Did you make the registry change that I sent you a private message?

  So, I agree with your statement. These are certainly back up files. The question is; What is backup files?

  Microsoft System Restore only deals with backup of critical system files and registration and records in a hidden folder that is not easily editable. In addition, you verified that this is not enabled for this player. So who is excluded.

  Another possibility is that other Windows, such as Windows Backup service, creates these files. Backup Windows treats the user's choice of the files instead of just the files of backup system.

  Try the following steps.

  1. Click Start, type "backup and restore" and press ENTER.
  2. This will bring up the Windows backup window. It seems to be set up, or it asks you to configure for the first time?
  3. If it is flagged by the look on the left side and you should see an option "disable automatic schedule;" turn this option off. The backup will be not automatically, but you can always do it manually on this screen.
  4. Delete the file Moberdan_HP from the HP_Tools partition.
  5. Improperly editing the registry if you used it.
  6. Reboot the laptop and make sure that the problem is resolved.

• Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card.

  This is the message that I faced when I tried ti a watch a DVD I've seen countless times in y HP laptop.  I read some answers here, but I do not understand something they are trying to say.  I'm not technologically minded so pleaaaase can someone tell me what is happening?

  Hi Abigayi lMcFadyen,

  To prevent the illegal creation of digital copies of DVD, information on most of the DVDs are blurred. Your DVD decoder and Windows Media Player have software to copy protection that decodes the information on the DVD just before posting. If this software does not start successfully, you may receive this error.

  Method 1: You will have to perhaps download and install the latest plug-in to do this, see the link below

  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  The third-party products or services mentioned here are manufactured or provided by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Method 2: You can see the steps in the link below by Shinmila H

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-Media-Player-cantwont-play-DVD-BC-digital/feefa02d-f6c0-42cd-8156-9046e4f83783

• problem with the files of exported data after conversion from 10.1 to 10.3 OPA OPA

  Hello
  
  If all goes well a relatively simple question
  
  We have recently acquired access to the OPA 10.3
  
  We have previously developed a 10.1 modules which we imported 10.3 using the upgrade features. This one is designed to be an interface from machine to machine and as such is entirely dependent on the Fed data to make decisions, there is no question screens or interviews.
  
  Then, we have tried to import some ".xds" files we had created to 10.1. There are more than 160 of them, including in general more than 120 items of data in each with multiple entities and bodies.
  
  When we import in 10.3 you get an error message which reads:
  
  
  + "System.NullReferenceException: object reference not set to an instance of an object." +
  
  + Oracle.Determinations.Remote2.Util.LegacySessionDataXDSImporter.ReadEntity (XMLStreamReader reader) +.
  
  + Oracle.Determinations.Remote2.Util.LegacySessionDataXDSImporter.ReadSessionData (XMLStreamReader reader) +.
  
  + Oracle.Determinations.Remote2.Util.SessionDataXDSUtils.ImportSession (SessionData sessionData, Rulebase rulebase File xmlFile) +.
  
  at Oracle.Modelling.Debugger.Core.UI.DebuggerRunView.btnImport_Click (Object sender, EventArgs e) + ' + '.
  
  the simple solution is for us to reintroduce the '.xds' files in the debugger, but given that it it took over 2 weeks for our team at the entrance of the '.xds' in the first place, we would obviously like to explore other options first!
  
  Any help or ideas would be greatly appreciated
  
  See you soon
  
  Dave

  Hi Dave,.

  I have this working on the copy of the modules I've had, it's because your entity / relationship public names do not match the .xds, probably because of the upgrade file. I sent you an email on this subject.