Problem with the Wifi Smart device identification
I have more than 20 devices in my network. Most with dynamic IP allocation. After you run the router for a while, it seems that names assigned device mixes and when I look at the list of devices and click on a specific device it will show a lot of MAC and IP addresses that belongs to him.
Anyone else experience this behavior?
It would be nice if it was possible to manually assign a name to a specific MAC address.
It's the E4200
This is a known bug.
Tags: Linksys Routers
Similar Questions
-
Error message indicating the problem with the monitor of devices in Windows XP.
Original title: Device Monitor
Error message indicating the problem with the monitor of devices in windows xp. How to fix?
Hello
1. when exactly you receive this error message?
2. What is the brand and model of your computer?
3. What is the exact error message that you receive?
Please provide us with more information about the issue so that we can provide you with the necessary assistance.
-
problem with the base system device
Hello! I have HP pavilion dv7-2250em, and I have a problem with the base system device. What should I do?
Hello
Maybe that's a problem with the card reader driver. Try to download and install the driver from the link below.
FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45046.exe
Once the installation is complete, restart the laptop.
Kind regards
DP - K
-
Problems with WiFi. Problems with the Wifi adapter driver.
Hello
I have a Dell Inspiron 3520 with original 8 Windows installed on it. Wireless settings worked fine until yesterday but anyway its no longer works. I don't see any WiFi option and no wireless networks are also getting detected. Although his active on the network and sharing Center.
The details of the pilot are:
Dell 1703 802.11b/g/n (2,4 GHz) Wireless
The internet LAN connections are working properly. When I received a diagnosis of the wireless connection, he said that there could be a problem with the driver for the WiFi card. I also tried the system restore, but the problem persists.
How can I sort this problem?
Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should helphttp://captaindbg.com/how-to-update-drivers-on-Windows-7/ (also works on Windows 8) -
"Détarer" problem with the Torch 9800/Device Simulator
Hello everyone,
Im a very strange problem with the Torch 9800 (OS 6).
I have an application developed with 5.0 SDK. Throughout the process of synchronization of this app, there is a point he gets a. tar.gz file that is unziped. For this purporse (in fact, the tar part / "détarer"), we use a tar / "détarer" 'library' we found here in the forum (http://code.google.com/p/j2metar/). This library works fine in all phones with OS 5.0 that we try and even on the simulators of somo 6.0.
But there seems to be a problem with the torch. During the uncompress, there are an exception, because what is the reading of the structure of the tar (from the industry), load the bytes that are invalid, corrupt, dirty, memory, and it fails.
The strange thing of all is that if I have only the routine détarer to the file (in the torch), it works! But when I run all my sinchronization, which open and close httpconnections and process the file on some points (sometimes the same point, others of different) fails.
My question is... are at - it a known bug, issue, etc. with the BONE of the torch (touch device)? Of course, the first thing that jump to mind is "my code is incorrect, memory leaks (in Java, but perhaps odd that a stream was not getting close properly)" and so on, but I can't seam to find the problem. And like I said before, this application works fine with the same file tar.gz in other devices like the 8520 OS 5, 9780 OS 6, 8900 (OS 5).
IM completely stuck with this problem and any help/test will be greatly appreciated.
Here some code, the method that makes him détarer and calls the détarer/tar library:
public static boolean "détarer" (String tarFileUrl, String destUrl) bird Exception {}
FileConnection fconn = null;
FileConnection tarFileConn = null;
TarInputStream tis = null;
Boolean bRet = false;try {}
fconn = (FileConnection) Connector.open (destUrl, Connector.READ_WRITE);
If (! fconn.exists ())
fconn.mkdir (); Create the folder if it does not exist
fconn. Close();
fconn = null;
Create a TarInputStream
tarFileConn = (FileConnection) Connector.open (tarFileUrl);
TIS = new TarInputStream (tarFileConn.openInputStream ());
tarFileConn.close ();Entry TarEntry;
int count;
data Byte = null;
While ((input = tis.getNextEntry ())! = null) {}
Count = 0;
data = new ubyte [2048];fconn = (FileConnection) Connector.open (destUrl + entry.getName (), Connector.READ_WRITE);
If (! fconn.exists ())
fconn. Create(); create the file if it doesn't exist
else {}
fconn. Delete(); Create a new
fconn. Create();
}OutputStream os = fconn.openDataOutputStream ();
While ((count = tis.read (data))! = - 1) {}
OS. Write (data, 0, count);}
OS. Flush();
OS. Close();
fconn. Close();
fconn = null;
}TIS. Close();
TIS = null;
bRet = true;
} catch (Exception e) {}
e.printStackTrace ();
throw e;
} {Finally
try {}
If (tis! = null)
TIS. Close();
If (tarFileConn! = null)
tarFileConn.close ();
If (fconn! = null)
fconn. Close();
} catch (Exception e) {}
}
Return bRet;
}Thank you!
Santiago.
Hello
It is a problem with the OS 6. I've posted about this before here:
Basically, corruption may occur if you write to the stream simultaneously in different threads. The solution is to ensure that a single file operation is occurring at a given time. Some people have had the chance to control the size of the buffer to something as a multiple of (64 * 1024)-1. e.g. 65535. In addition, you can rinse after each write to the buffer. I have had no luck with this, but others. If you look at the bug in JIRA, there is also no activity on this:
https://www.BlackBerry.com/jira/browse/JAVAAPI-1513
Good luck!
-
15 - r203tx: PROBLEM with the WIFI DRIVERS.
Guys I recently installed 10 windows on my laptop after that wifi does not work well. I downloaded sp72517 improved wifi driver and the Bios is updaed without GeoConnections vps nothing. But I have to rebooot or reinstall the drivers to use the wifi and it is itself uninstall autoatically as 10 times per hour. I already have enough of that. Please help me with this problem.
Hello:
Have you tried the latest WiFi card driver, which was recently released for the Realtek RT8723BE 802.11bgn combination adapter Wi - Fi and Bluetooth 4.0 1 x 1 has your laptop?
TITLE: Realtek RTL8723BE/RTL8188EE 802.11b/g/n wireless LAN Drivers
VERSION: 2023.27.1230.2015 REV: A PASS: 2
ENTRY INTO force: 15 March 2016 -
problem with the WiFi on my HP Envy dv6
Hello
I have a problem with my HP Envy dv6 notbook. It cannot find and connect to wifi.
But other laptops in the House. And when I do the connection his very low and stop continues.
technical information:
producktname: HP dv6 Notebook PC ENVY
producktnumber: D4F57EA #UUG
operating system: Windows 8.1 64-bit
BIOS: F.22
Network: Intel Centrino Wireless - N 2230 version: 15.12.0.6
I hope there's someone
Welcome, Mathies
IF your model is select make sure you chose the right method.
If you still can't make it work, try this in order
Win7:
http://pcsupport.about.com/od/fixtheproblem/HT/update-drivers-Windows-7.htm
WIN8:
http://pcsupport.about.com/od/Windows-8/a/update-drivers-Windows-8.htm
-
problem with the connection of devices to VMware guests
I have a hpe 130f. When I power on a virtual machine, I get the message «failed to initialize the controller usb in VMware» I did everything according to the VMware kb. I've never had this problem with my old computer, so I suspect it's a driver causing the problem.
The fixed. I discovered that the ATI catalyst install Manager has been installed which contains an amd usb filter driver. I just uninstalled, rebooted and now VMware can communicate with my usb devices. I don't know why, who was installed by hp as my system has a nvidia card, although I think there may be an ati integrated graphics card.
-
Problem with the wifi on Satellite A200 - 1-3 configuration
My laptop is A200 - 1 3. The problem is that I don t have a wireless network. My other laptop has configured automatic wifi when I turn on the laptop for the first time. Who has not. He tells me to spend on something, but I put t know what it is. Please help me.
http://www.picnote.com/download/279793852/Untitled.jpg
Greetings
Hello
Take a look in the manual for the wireless switch. This will tell you how to enable the wifi switch. Although I'm not an expert, every Toshiba I used you also allows to use the Fn key + key F8 to enable wireless connections.
If you do not have the manual, you can download it here, I think.
[http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_manuals.jsp?service=UK]Best regards
-
Hello
Recently (within the last week), I ran into a problem where my computer thinks certain keys/buttons are down.
They are:
W
A
S
D
Q
E
Maj
Space
Control
Right-click
Left click
These are my most commonly used keys/buttons, so it can become very annoying. In addition, most of the F keys get stuck, but it's because there is something that needs to be cleaned under the feet.
My questions are: How can I fix? Is this a problem with my computer or my keyboard and mouse?
He questions, here are my computer Incase care, as well as my keyboard and mouse:
Inspiron 620, 8 GB RAM Dell, AMD Radeon HD 6450, everything the way it came to the left
Mad Catz Cyborg S.T.R.I.K.E. 7 keyboard
Mad Catz Cyborg R.A.T. 9 mouse
Hello
Welcome to the Dell Community Forum.
This can happen due to wear normal use of the keyboard and the mouse, click on this link http://ow.ly/Ermrr which has some steps and download the FIxit. Restart the computer and let us know if this changes anything.
-
Problem with the WiFi connection
That's what it shows. When I click on it there are no available networks?
Hi Cihan,
Thank you for the update.
-
Blue screen associated with the WiFi [ntoskrnl.exe]
Hello, I got several BSOD today. I discovered they are related to the wireless lan connection, because I get them when I tried to use the wi - fi connection. Can someone help me? I don't know why I get these errors.
The Minidump files: http://sdrv.ms/RycBXIHello
Results verified BlueScreenView WinDBG / DumpCHK.
The Bug_Check were CAUSE D1 athrx.sys Atheros WiFi driver (wireless).
BugCheck D1, {1, 2, 0, fffffa800b65d698}
Probably caused by: athrx.sys (athrx + 299621)
MODULE_NAME: athrx
Nom_image: athrx.sys
FAILURE_BUCKET_ID: X64_0xD1_athrx + 299621
BUCKET_ID: X64_0xD1_athrx + 299621athrx.sys as of 07/24/2012 Atheros WiFi driver (wireless).
fffff880 '07625000 fffff880' 079d 8000 athrx T (no symbol)
Loaded symbol image file: athrx.sys
Image path: athrx.sys
Image name: athrx.sys
Timestamp: Kills Jul 24 08:03:45 2012 (500EB951)1. verify or update driver Atheros WiFI (wireless).
Drivers Atheros WiFi.
http://www.Atheros.cz/Atheros-wireless-drivers.phpVerson is very common, so there may not be a newer version available. Otherwise try to reinstall
it. you may need to go back to an older version of the driver. And there might be a problem
with the actual hardware device.2. check with the Sony Support, their drivers and documentation online and ask in their forums
on known problems.Sony - Contacts
http://eSupport.Sony.com/us/Perl/contact-land.plSony - drivers
http://eSupport.Sony.com/Perl/select-System.plSony - Support
http://eSupport.Sony.com/Sony - Forums
https://Forum.sel.Sony.com/?XID=M:Showcase:eSupportBiosVersion = R1190V3
BiosReleaseDate = 05/09/2011<- check="" for="" updates="" to="" the="" bios,="" low="" level="" chipset="">->
and drivers of major on-board and separate devices.
SystemManufacturer = Sony Corporation
SystemProductName = VPCF22S1E
Family = VAIO
SystemVersion = C6091KF8
SystemSKU = n/a
BaseBoardManufacturer = Sony Corporation
BaseBoardProduct = VAIO3 run DriverVIew - VIEW driver Microsoft set hide - update those without drain in their
names (see Update methods in the next post).4 use the other methods in the troubleshooter below and in the next message.
=============================================================
Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
in this thread - top 3 RESPONSES (+ 1 other).==============================================================
BCCode: D1 0x000000D1
Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2
from sleep or standby extended: "STOP: 0x000000D1".
http://support.Microsoft.com/kb/978982Stop error on a computer based on Windows Server 2008 R2 or Windows 7 during operation
system uses a storport virtual miniport driver to save a dump file or a file of hibernation: "0x000000D1.
http://support.Microsoft.com/kb/2320550Those 7 other KB Articles are available
http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000D1&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10--------------------------------------------------
Think video drivers especially if it may be others. Refer to the section of driver in my credits
methods of troubleshooting blue screen below. BIOS, chipset of low level drivers and
antispyway/antivirus/security programs can also cause this. Check the resolution of the problems and
When you arrive at the driver and tests of memory sections do reference to generic methods in following
message and then back to the if necessary troubleshooting tool.Cause
A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.
This bug check is usually caused by drivers who used a wrong address.
If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:
- The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
- The function call was made to a function in another pilot, and that this driver has been unloaded.
- The function was called by using a function pointer that was an invalid pointer.
BCCode: d1 0x000000d1<-- read="" this="">-->
* 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-=========================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlStop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the professional, full and Enterprise edition)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
He said to reinstall the drivers for this problem, but they don't reinstall... also he says hardware changes have been detected... can someone explain in easy to understand words what the problem is and how to fix it... pleaseeeeee... Thank you... The convenience store said: THERE IS A PROBLEM WITH THE DRIVER of MICROSOFT VIRTUAL WIFI MINIPORT ADAPTER... DRIVERS MUST BE REINSTALLED... it won't reinstall... also: PROBLEM WITH PnP DEVICES HARDWARE CHANGES HAVE BEEN DETECTED? CAN SOMEONE HELP ME UNDERSTAND, IN EASY WORDS, EXACTLY WHAT I NEED TO DO TO FIX THIS... CD-ROM... IM USING A SAMSUNG LAPTOP MODEL NPR 519 RUNNING WINDOWS 7... Thank you... Update on the microsoft Web site says: this DEVICE no IS NOT WORKING PROPERLY BECAUSE WINDOWS cannot LOAD THE DRIVERS REQUIRED for THIS DEVICE (code 31)... im not computer savvy please someone help
Hi MAGIC,
It seems that you may need to update your BIOS firmware.
You may need to contact Samsung for more information, if the update is available for download on their Web site.
When started this issue is happening?
You can disable the virtual WiFi adapter, as it essentially works as a tool of development at the moment:
http://msdn.Microsoft.com/en-us/library/dd815243%28VS.85%29.aspx
What is the device that has the problem?
Reinstall the drivers to fix the problem?
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Problems with the maintenance of my 32D3453DB Smart TV connected to the internet
Hi all
I recently bought a Toshiba 32D3453DB Smart TV, but whenever I turn it on, it says wifi dongle has been removed. Then whenever I try to connect to the portal of Toshiba, he said: no internet access, please check your network settings. When I check my network settings, it says not connected wireless device. Then a few seconds later, it connects automatically without me pressing anything
I always click on network settings to connect to the portal.
Anyone know what is happening here? It is so annoying to have to go into the settings of network, I want to access the portal.
Thank you.
This looks like a problem with the connection of the internal Wifi PCB. Suggest you to contact the hotline and ask for inspection of the material by your local Toshiba service partner.
-
Problems with the Smart keyboard (iPad 9.7 Pro)
I recently bought the iPad Pro 9.7 inches, gray space, Wifi, 128 GB. IOS 9.3.1 of the operating system.
A few questions that I met in my four days of using the iPad with the Smart keyboard:
NOTE: the following problems persist despite a technical support call which lasted, I did 2 hours and 30 minutes. I had to restore my iPad settings by connecting to iTunes via my PC to reinstall the last iOS.
(i) switching applications: if I want to pass, say, from safari to adobe, it is quite easy to do with the keyboard. However, there is an intermittent problem when the apps. When I try to open Adobe when I use safari, the screen of the iPad shows apps that are open as soon as I press the command and tab key.
What is supposed to happen - I choose to open Adobe, Adobe opens.
What happens to the contrary - Adobe does not open. Another "X" application that is currently running, opens. It is quite frustrating, because there is no pattern to this. If I use once more the keyboard shortcut to open Adobe, another application 'Y' which is running, open it now.
In this case, I pointed out, often when the App Store is running.
(II) command key: sometimes, shortly after I use the shortcut keys to turn on screen shortcut area (pop-up shortcut) - apps, this is supposed to happen if and only if you press and hold down the command key.
This often happens when I switch to Safari.
(III) keyboard not responding: a problem that I met today for the first time. My keyboard will not just respond. I had to disconnect and reconnect the keyboard for this function.
(IV) on which the space key: to wake up the iPad, pressing the SPACEBAR is enough. You don't have to press the home button. Yet, sometimes the space key does not respond and you must use the home button.
v) Quick app - keyboard shortcut crash switch function causes: if I want to switch from app to app 'X' 'Y', but mistakenly switch to 'Z' app, I immediately want to spend to 'Y '. However, I can't do this in quick succession. I have to wait a second or two before I can switch from 'Y' 'Z' app, otherwise the automatic switching app crashes and you have to wait once more for a second or two before moving on.
My diagnosis:
(I) it could be a problem with the smart connector on my iPad. A hardware problem. But it does not explain why the automatic switching app appears and passes correctly but eventually open the wrong applications. Also, it does not explain why the problem is intermittent.
(II) a software problem. However, that would make me a face 5 questions at once. Sort of. I was surprised that, apart from the question of #3 and #4, there was almost no mention of other issues.
To restart the iPad or to disconnect and reconnect the keyboard. But I don't think that anyone would be willing to do this 4 - 5 times on a daily basis.
Update:
So I used my keyboard all day yesterday without opening the App Store. And guess what? It has been working perfectly. All the above problems I mentioned were not available yesterday. I'll use the App Store today and let it run in the background to see how does my iPad.
Maybe you are looking for
-
Hey, I bought a Qosmio F60 off my father and made a new installation of windows.I installed the drivers for all devices on the system except for the wireless (WLAN). I've been on the site toshiba driver and downloaded the Realtek drivers without succ
-
Time Capsule missing after installing new router
I recently installed a new wifi router for my home network. Previously, I used only my time capsule to back up data and intend to continue to use it for backups. However, with my new router, I can't find how to access the time capsule to keep backups
-
Is it possible to rename the files in a particular format?
Hello! I work with dozens of files like this all day, and I tried to understand if there is a way to rename them which will reduce my processing time. I know the company F2, but who don't get what I need. Here's an example, please let me know if you
-
I just installed new HP color and the black photo cartridge toners. I printed 3 photographs (5 x 7) and the alert of ink message appears showing the color cartridges are low. It seems that the cartridges don't last very long even when I'm not print
-
Detonators in place. Help someone? D:
Uh, it's a sansa 2 GB with 1 gb micro SD fuse. last Firmware ver. too V01.02.26A computer running window Xp sp3. Well he's not my rocket, my small cousin actually. in any case hes had the "rocket" for 4 months now its been great so far.He said it was