Problem with Toshiba Stor.E D10, 1 of 5 TB external HARD drive and eSata connector

Similar Questions

• came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

  original title: lack of games
  I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

  I have no games. No solitaire, Minesweeper, no nothing.
  How can I, without seeking to erase and reinstall again?

  To activate the built-in Windows 7 games:

  1. click on Start (lower-left) and then on Control Panel.

  2. click on programs and features.

  3. on the left side of the screen, click on 'Windows turn features on or off".

  4. find the entry called games & check the box next to it.

  5. click on OK.

  6 reset.

  If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

• Installed new hard drive on laptop with Windows 7 can install Windows XP on external hard drive and plug it into USB?

  Original title: Win7 Pro + HD Ext different OS
  I just installed a new hard drive in my laptop with Windows 7 Pro 64 bit.
  Would it not be possible to install WIn XP or Win 98 + older software (Win 98 or XP) on an external hard drive, then plug it into USB, laptop, in order to run old programs of 16-32 bit?

  It would be best to run Windows 98 or XP in a Virtual Machine, if you need to run older programs.

  You can use a free software such as Oracle VirtualBox or VMware Player:

  Sunny Random Ramblings: installation of Windows 98 in Virtual Box

• Problem with Toshiba Store.E Basic 2 TB HDD using Windows XP

  I added my old PC (Pentiun IV 2400 G, teacher of XP sp3), a new Store.e USB 2 TB HARD drive basics, if I connect warm works perfectly, but if I start the PC with the USB port connected, the system does not start, remain indefinitely in the Intel homepage.
  I have reviewed the Boot sequence in the BIOS, and it seems OK (dvd, C...).
  Any ideas. Thank you.
  Alvaro

  just don't not tied him at the start, he thinks that the disc is actually in the system

• Where to buy STOR. E ALU 2, 3.5 "external hard drive 2 TB of capacity?

  Hi all

  I am looking to buy two STOR. E ALU 2, 2 TB disks 3.5 "to replace the two ALU 1 TB drives that I currently have.

  Toshiba press releases and information all indicate these drives should be available in the 2nd quarter of this year. We are already in August and there is no sign of them yet.

  I'm really eager to these readers as they look the part next to my Apple Mac Mini, which I use as a media server.

  Does anyone have any idea when these discs will be available or where I could find one?

  Thank you very much

  John

  I googled a bit but the result was the same as yours, that I wasn't able to find any online store where to order this HDD.
  I put t think anyone here can offer an adequate answer to your question then I think your only option is to wait and see when the HARD drive will be offered on the market.

• I used to be able to do with discs DVD-R data discs, now iv changed my hard drive and my computer only recognizes CD - R when I try to burn data?

  "Please insert the disk" error message when I try to burn data to DVD-R disc but works fine when burning data on CD - R.  Also, he can't read and data DVD - R disks, I made from the same computer in the past with the old hard drive, is my new hard drive, missing some sort of driver or something?  Windows XP computer bought from Dell about 4-5 years (Dell 5150).  He let me play commercial CD, burn CDs and burn data on CD - r.  He no longer do anything with a DVD-R disc, wont even recognize one, please help

  Hi malikchebli,

  See the below Microsoft article and try the steps mentioned, check if it helps.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

• Using a Macbook with an external hard drive and CD player

  I think buy a MacBook, because these devices do not have a CD-ROM drive or huge hard drives, I would like to know if running on ports 2 USB external drives could run iTunes as my Acer Aspire now.

  The MacBook does not have 2 USB ports, perhaps you are confused with the MacBook AIr or MacBook Pro.

• I am trying to backup my drivers on my external hard drive and I don't know how to do it and I've lost my windows disc that came with the computer

  I need to know how to save my drivers on my hard drive or on a disc because I lost the disc to my computer and I want to change my hard drive on my laptop

  You back up your operating system, not your drivers.

  If you have Vista Business or Ultimate:

  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  Explore the features: Windows backup center and restoration

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  How to use the Vista computer backup and restore

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  When you buy a NEW hard drive, the new hard drive manufacturer is normally cloning software available on their website for you to download and do exactly what you want to do.

  Alternatively, use 3rd Party software, you will have to pay for:

  http://www.Acronis.com.au/homecomputing/products/TrueImage/

  Or get a drive for recovery of your computer manufacturer, or borrow a DVD of Vista from Microsoft and reinstall Vista,

  Read the info below:
  

  How to get Vista recovery Media.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• With the help of a backup on an external hard drive to transfer files to a new computer.

  I recently got a new computer and I need to transfer my files via my new computer. Both computers running Windows 7. I have an external hard drive that has all my files from my old computer on it. I went into the control panel configuration, then system and security, and then in the backup and restore. I then clicked on "select another backup to restore files from" and looked for my external drive. I made sure that it was connected and up-to-date as well. However, he never showed up.

  I would like to manually just transfer the files, but it seems as if there are readers split on this computer for 'BONES' and 'DATA '. For this reason, I'm not sure which car I'd put even files on.

  How can I transfer these files?

  Hello

  I understand that you are having problems with the restoration of the backup files of the external hard drive. Correct me if I misunderstood the question.

  (1) what is the version of Windows 7 is installed on your computer?

  (2) have you made changes on the computer before this problem?

  (3) you receive an error message when you try to restore?

  I suggest you to consult and follow the steps in the links and check if the problem persists.

  Backup and restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

  Restore files from a backup

  http://Windows.Microsoft.com/en-us/Windows7/restore-files-from-a-backup

  I hope this helps. Try the above steps and get back to us for more assistance and with the requested details, if the problem is not resolved.

• Problem with external hard drive 500 Gb Stor.e Steel

  Hello

  I ve bought a Store.e steel 500 GB external hard drive and I can't get large files (such as 4 GB) it wit. There is a message that says that the file is bigger that the system supports whenever I try to get a file of 4 GB, but I have 300 GB of free.
  What evil?
  Thank you

  I agree with user Stephen.
  The file format of HARD drive seems to be FAT32, you must format the HARD disk to NTFS to be able to manage files over 4 GB.

  Welcome them

• I have a problem with the external hard drive not detected on the computer as a disk.

  I connected an external hard drive toshiba via USB on this victory 8 x 64 computer that is also a toshiba and the computer doesn't show as a reader in fact it shows that he as a device so what gives. This thing have not even a letter such as C: (what internal hard drive) I watch the little arrow to show you, it is prudent to remove it so it appears here, what does I have a drive bad ext or what? Oh yes, I have tried all my ports even

  Hello

  I suggest you to assign a drive letter for the external hard drive and see if it helps.

  To do:

  a. press the Windows key + R and type diskmgmt.msc.

  (b) if the hard drive recognized in disk management and if there is no drive letter assigned, I suggest you do a right click on the drive and assign a drive letter and check if it helps.

  c. right click paths and the drive letter Change.

  Do one of the following:

  ·         To assign a drive letter if it has not already received, click Add, click the letter you want to use and then click onOK.

  ·         To change a drive letter, click change, click on assign the following drive letter, click the letter you want to use and then click on OK.

  d. restart the computer and check.

  Hope that the external hard drive will not be detected after that.

  Please report if you encounter any problems related to Windows and we will be happy to help you.

• Problem with Lightroom and external hard drive. Files and folders deleted.

  In the classroom (8.1 windows computers) import us images that .dng files on an external hard drive using Lightroom.

  After the Lightroom, insert us the memory card containing photos and attach an external hard drive. (formatted to ntfs)

  We create a new catalog on the external hard drive and then create a folder as the destination for the images on the external drive as well.

  After passing to the newly formed catalog in Lightroom, we import the photos from the memory card to the external hard drive.

  Photos are present in the folder 'import' on the external hard drive after the end of the import, so checking with windows Explorer.

  After the closure of LR and disconnect the external hard drive of the computer, it appears that the newly created files and imported files have disappeared.

  We tested with an external hard drive in exfat. The same problem.

  There is no problem when you copy directly in Explorer windows of memory card files to the external drive.

  The files are not hidden. Tested on mac and windows.

  If you said that the photo files are on the external hard drive when you checked using Windows Explorer during the class? Is this correct? YES
  Then you go home and the files are not on the external hard drive? YES

  Well, it is a mystery, but there is no way that Lightroom can be the culprit.

  Is it the same for the catalog file, in class, he was present on the hard disk according to the Windows Explorer, and when you get home, is no longer on the drive? YES

  Same conclusions, it is not Lightroom.

• I can't access my external hard drive with windows 7. How can I get my music out of her files? My pc with xp operating system can access it without problem. but my new pc with windows 7 does not see the hard drive.

  I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.

  Check that the drive appears in Device Manager.

  If so, go to disk management and assign a drive letter.

• Help with Hard Drive and registry

  Hey, it kinda turns out to be a long and difficult history, but I recently had a small problem that spread to a problem much bigger (and catastrophic).

  I had a problem with freezxing on my laptop (HP Pavilion Dv5 with the 64-bit version of Vista I think). I've tried a few things m ais it froze just in case. Finally I found someone who said they ran a registry cleaning program and that did the trick. I tried and I had no more freezing. Unfortunately, I connected an external hard drive and all hell broke loose. It froze and I turned off the laptop. I have it turned on and was greeted with this message:

  STOP: c000021a {Fatal System Error}
  The Session Manager failed to create protected prefixes system process terminate
  d unexpectedly with a status of 0x000003a (0x00000000 0x00000000).
  The system has been shut down.
  

  I tried to boot in safe mode and found:

  STOP: c0000218 {Registry File Failure}
  The registry cannot load the hive (file):\SystemRoot\system32\config\SOFTWARE or its log alternative.
  It is corrupt, absent, or not writable.
  

  Then, she went and made the collection of data, and that was all. After that, I tried the boot recovery option and that never worked. I searched internet and found a few people with similar, but never the same questions. Someone, somewhere, says something about execution of system restore after having access to the menu by pressing F8 at startup. I tried. It did not work. I pressed F8 at startup upward and chose the first option. It has established a list of things to try. System Restore (and other options such as checking memory and bring up the command prompt) did not work because the C drive has been used. Large. I tried to use the disks that came with my laptop and I never once found while they were actually useful because I could never the laptop to run.

  Now, I wanted to try to use the command prompt. Never really had a chance. Now, when I start the computer I'm greeted by the inspiring message of hard drive are not.

  Sweet. Now, I'm a little stuck on what to try. I tried to reset the BIOS defaults and nada. I have no idea what it must try now and would love to help anyone.

  I would be very happy and I thank you for your time.

  It depends on how much you have to pay to get the new hard drive installed and running. Get a quote for a computer shop trust you.  So I think that if the computer has been done what you wanted to do before he went wrong.  If it was enough for you and the price of the repair is not too high (maybe less), I would. If the price is more than $ 200, I would start thinking about applying your money towards a new laptop computer, but that cheaper isn't always the best deal.  Do some research and try some mobile friends to see if it is fast enough for you and you enjoy the feeling. Stop in some stores that display laptops and taste. Laptops with dedicated video card memory will do better with the games.  If the games are starting to become important to you, consider a desktop computer instead of a laptop where you can buy a killer video card. I like the new Ivy bridge to intel for laptops so look for it.  This is the new family of Intel processors. I7 Ivy bridge is the finest, then the i5, then the i3.  You really need to sit with someone who knows computers and discuss your needs for the future and how you want to use your computer.

• Maching time keeps failing - bought new hard drive and still the same problem

  I'm on a mac 27 inches, El Captain 10.11.2 upgrade

  Not had a problem for years and then suddenly about a month or two before, he started to do all the time. Got a mybook 2 TB for mac for Christmas - same problem. Works perfectly for hours/days at a time, and then fails again. Don't know what to do!

  

  

  I know it sounds weird, but I would like to start by making sure that your Mac hard drive is correct. Demarrer start on the recovery environment, run disk utility and perform first aid on your hard drive. You can also perform a boot secured, which does essentially the same thing.

  I also saw problems with USB devices that appear only on a specific USB port. Try changing ports.

  The external drive is new does not mean that it is not defective. Perform first aid on the external hard drive and reformat. Better still, try another drive altogether to eliminate the drive as the source of the problem.