problem with touchscreen

I use the hp Pavilion TouchSmart. I can't access the computer by using the touch screen. is it because of the place or my pc has problem with its screen?

Hello

Please follow the instructions below:

http://support.HP.com/us-en/document/c03488148

Kind regards.

Tags: Notebooks

Similar Questions

  • HP Touchsmart problem with touchscreen driver ect...

    Hello

    I have a big problem please help me.

    HP TouchSmart 520-1018fr desktop

    Model: H0N17EA

    I no longer Recovery Manager pour restore drivers and software under Windows 8.1 home 64 bit because I want to put the ' with touchscreen.

    HP TouchSmart 520-1018 en

    Manufacturer: Hewlett-Packard
    Maximum resolution: 1920 x 1080
    Screen size: 23.1 "(51 cm x 29 cm)
    Manufacturing date: 31/12/2001
    Aspect ratio: 16:9
    Type of video input: Signal digital DisplayPort

    I had Windows 7 home 64 bit on this PC before then I do a reset completely uninstall w 7 on this pc I wanted to have the computer naked complement that he nor more nothing on the hard drive.

    Pour Installer w 8.1 home 64-bit is now I have nothing

    not covered or the touch screen or HP update since I installed w.8.1 home 64 bit.

    I go into the device from the pc it does not find the driver to download.

    I have search the Internet to find the driver pour have new ' screen touch but cannot find the driver pour reinstall l ' touchscreen under aw 8.1.

    Thank you in advance pay help me.

    CDL

    PS: Besides the Pc reboots of it is under tension (EDF) unless I press the Start button of the computer...

    Hello
    I found the solution, that it is in the BIOS
    This good so good
    Thank you

  • PROBLEM WITH TOUCHSCREEN KEYBOARD AND WRITING - LENOVO SU230 TWIST

    Hello, please request your support that I do not appear on the numbers and the symbols of the touch keyboard, only to show the letters LISTED SQUARE SMALL INSTEAD OF THESE characters, but characters that should, if someone could give me the model to overcome this drawback does not allow me to use my laptop when I use it as a Tablet

    Lenovo Thinkpad model SU230 Twist

    Hi Ricardo,

    It seems to be a problem with do not have updated or updates relevant driver/firmware. I would like to know some information about this problem so that we can help you further.

    1. have you made changes on the computer before this problem?

    2. do you get any error code or error message while starting?

    I would suggest trying the following methods and check if it works for you.

    Method 1:

    Run the hardware and devices Troubleshooter and check if that helps.

    Follow the steps to run the Troubleshooter:

    a. press Windows + W on your keyboard to move to the search option.

    b. type Troubleshooting , click Troubleshooting.

    c. now, type Hardware Troubleshooter in the option Search .

    d. click on Troubleshooting of hardware and devices and follow the prompt to run the troubleshooter.

    Method 2:

    Download the update of firmware of the touchscreen controller on the Lenovo site and check if the problem persists.

    Atmel touch tool updates firmware of controller for Windows 8 (32-bit, 64-bit) - ThinkPad Twist S230u:

    http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS035873

    Please reply with the status of the issue so that we can better help you.

  • Problem with my Lenovo Ideapad Flex 15 touchscreen driver

    Nice day!

    I'm having a problem with my Flex 15 touchscreen. I can't use the touch more. I tried to check the Device Manager, but found no driver installed touchscreen. I had this problem when I have not used/turned on my laptop for almost weeks of towing. I've already tried some I read on the forums, but the results were the same. I still can't use my touch screen properties. What should I do? Thank you for your response. My laptop was running windows 8.

    Hello Ronald.

    Thanks for posting your query in Microsoft Community.

    I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

    1. The issue has started happening recently?
    2. You did it any significant hardware or change software on the computer before this problem?

    This problem occurs when there is that no updated drivers are there for the material. As you have tried most troubleshooting including reset, I suggest you try to install the updated for touchscreen drivers and chipset drivers and check if it helps.

    Method 1:

    Uninstall and reinstall the driver for Interface devices and check the issue. 

    Follow the steps below to uninstall the drivers.

    1. Press the Windows key + X , and then select Device Manager.
    2. You can search for Devices of Interface and expand it.
    3. Right-click on the Devices of Interface and select Uninstall.
    4. Restart your computer. Windows will install the generic drives after reboot.

    Look for the question, if it persists the passage to the next method.

    Method 2:

    Uninstall and reinstall the chipset drivers and display drivers.

    Follow the steps in method 1 to uninstall display drivers and chipset drivers but it does not restart, you need to download the driver from the link below.

    Drivers and software - Flex laptop computer 15 (IdeaPad)

    In addition, you can also view responses 'marked' in the following thread:

    Touch screen not working not not - Windows 8 - Lenovo Flex 15

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • Shared variables with touchscreen of TPC-2106

    I can't work with a TPC-2106 Touch Panel shared Variables.  I am hosting a Board 9642 sbRIO variables.  I built a test VI to run from the hard drive, and I can edit and read variables that VI.  When a generation a VI to run it on the touch screen works, but he can't read or write on all shared variables.  No error is shown during the execution of the VI.

    It seems that I is not need to take special steps to install support for this version of touch panel by: http://zone.ni.com/reference/en-XX/help/372507A-01/lvtpcgsm/tpc_install_sharvar/

    I tried the "Shared Variable.lvproj" sample project that is supposed to generate weather information and then transfer it to the touch screen.  The weather data are generated and displayed by VI on my PC.  The VI on the touch screen works, but never any weather data updated.

    I use LabVIEW 8.6 with touchscreen, FPGA and real-time modules installed.

    I have the touch screen connected via an Ethernet cable directly to my PC.  I assigned an IP address to the touch screen manually.

    Problem is solved using an Ethernet crossover cable instead of a standard cable.

  • Problem Z5P touchscreen (tap)

    I am facing a weird problem with the action of touchscreen (tap) Z5P in the top left of the Panel (the location of the (left arrow<-) or="" the="" (app="" menu="">

    1. after restarting, everything works fine

    2. after an hour or two, slippery (for example the head of facebook chat) is detected above this area, but leaving so the opening tap is not detected, same thing happens with any application (left arrow) or (the menu icon), even the (dos) parameters for example.

    3. using landscape in the same place (top left) is not detected when you tapoterez on, although the location of the touch screen is changed now, his top-right, I turned the wise unit's clock.

    4. after reboot everything works fine for an hour or two, so the question is back.

    tried the "service test", the touch sliding is detected allover the screen, but in the (test by tapping) tap water is not detected at box no. # 1.

    It's weird for me as if there was a problem in sensor, the problem should exist in the same place, even if I rotate the device, but it remains to the arrow (back) when the device is rotated.

    CCP software repair tried several times with no luck.

    After more digging I found the solution, simply the Facebook Messenger is the cause of this problem, by deleting the question went immediately, even without a reboot.

    @uliwooly,

    You have an idea, what happens if I contacted the Local Support?

    Simply, I will start a cycle of 2 months to send the camera on and it receives from East, the only difference will be the stripes added on their side, they will try every possible solution that they might know who are quite limited because we are men of the Egypt, Sony Support here may put not even the hand on Z5P until

    Please uliwooly, do not close a thread until you are sure that there is no solution, this place might be the only place for some users like me, their son of fence could lead to destroy their devices or lose over time

  • I have a problem with the touch screen of Sony.

    Original title: "Sony touchscreen issues."

    I am running Windows 7 Home Premium on a Sony All In One with touchscreen. For about 4 weeks, I got a problem with weird things happening on the screen. For example, I can use any application and it will automatically become minimized and I'm now looking at the level of the office. Other times on keyboard screen will appear in itself. Do not know what is happening, but it sure is frustrating the heck out of me. Answer from Sony is that I put the computer back to factory settings, thus losing my files and programs. Is there a way I can back up the system and retrieve my programs from the backup. I don't know if I can find my original downloads, including Office 2010.

    Thanks a lot for your help.

    Dennis

    Hello

    IAM having the same problem with my Sony all in one touch with Windows 7 home Premium edition running, did you get your problem solved, please let me know what I need to fix, it is very annoying to use the computer now that the application itself minimizes every minute.

    Help, please

    -Irshad

  • TC7.2.1 problems with SIP calls

    Hi, we had the following problem with sip calls:

    Here is the log:

    Version of the VCS software: Platform X7.2.3 | X8.2.1 Labor

    ______________________________________________________________________________

    Call with TC 7.2.1 does not
    ______________________________________________________________________________

    SIPMSG:
    | INVITE sip: [email protected] / * / SIP/2.0
    Via: SIP/2.0/TCP xx.xxx.60.133:57597; branch = z9hG4bK38f566387dbd719702049ddcb2590ebe.1; rport
    Call ID: 4832bd6a60d9d3d43670c55c573667ec
    CSeq: INVITE 101
    Contact: sip: [email protected] / * /: 57597; gr = urn: uuid:6 c 856033-4cbd - 5 b 15 - bb13 - 0715c4a694cd, ob>
    From: "201101102_C40_ServiceDesk" sip: [email protected] / * />; tag = d25377890df67530
    To: sip: [email protected] / * />
    Max-Forwards: 70
    Directions: sip:xx.xxx.1.51; lr>
    Allow: INVITE, ACK, CANCEL, BYE, update, INFO, OPTIONS, CONSULT, INFORM
    User-Agent: TANDBERG/521 (TC7.2.1.cb31c3d)
    "Proxy-Authorization: Digest ="bb1d830b2d64949caaadfb732cd7ca77414a991699854e8971970a68fe06"nonce, realm ="tplabvcsc01.xyz.com", qop = auth, opaque = 'AwAAAMSaxlh37 + YNQULdXHDdMkXYHVQ1', user name =" ", uri ="sip:xyz.com", answer is"51f225da16a3ac710e86c1b1b5815438", algorithm = MD5, nc = 00000008 cnonce ="21c839c8313e8f7f7477786cb40c5ee6. "
    Supported: replaces, timer, 100rel, gruu, way, way out
    Session time-out: 1800
    Content-Type: application/sdp
    Content-Length: 2842
     
    v = 0
    o = xx.xxx.60.133 IN IP4 6 2 tandberg
    s = -.
    c = IN IP4 xx.xxx.60.133
    b = AS:6000
    t = 0 0
    m = audio 16424 RTP/AVP 107 108 109 110 104 105 9 15 18 8 0 101
    b = TIAS: 128000
    a = rtpmap:107 m4as-LATM/90000
    a = fmtp:107 profile-level-id = 25; object = 23; bitrate = 128000
    a = rtpmap:108 m4as-LATM/90000
    a = fmtp:108 profile-level-id = 24; object = 23; bitrate = 64000
    a = rtpmap:109 m4as-LATM/90000
    a = fmtp:109 profile-level-id = 24; object = 23; bitrate = 56000
    a = rtpmap:110 m4as-LATM/90000
    a = fmtp:110 profile-level-id = 24; object = 23; bitrate = 48000
    a = rtpmap:104 G7221/16000
    a bitrate = 32000 fmtp:104 =
    a = rtpmap:105 G7221/16000
    a = fmtp:105 bitrate = 24000
    a = rtpmap:9 G722/8000
    a = rtpmap:15 G728/8000
    a G729/8000 rtpmap:18 =
    a = annex b fmtp:18 = yes
    a = rtpmap:8 PCMA/8000
    a = rtpmap:0 PCMU/8000
    a rtpmap:101 telephone-event/8000 =
    a = fmtp:101 0-15
    a = sendrecv
    m = video 16426 RTP / AVP 97 126 96 34 31
    b = TIAS: 6000000
    a = rtpmap:97 H264/90000
    a = packetization-mode=0;profile-level-id=428016;max-br=5000;max-mbps=245000;max-fs=9000;max-smbps=245000;max-fps=6000;max-rcmd-nalu-size=3456000 fmtp:97
    a = rtpmap:126 H264/90000
    a = packetization-mode=1;profile-level-id=428016;max-br=5000;max-mbps=245000;max-fs=9000;max-smbps=245000;max-fps=6000;max-rcmd-nalu-size=3456000 fmtp:126
    a = rtpmap:96 H263-1998/90000
    a = fmtp:96 custom = 1280, 768, 3; custom = 1280, 720, 3; custom = 1024, 768, 1; custom = 1024, 576, 2; custom = 800, 600, 1; cif4 = 1; custom = 720, 480, 1; custom = 640, 480, 1; custom = 512, 288, 1; CIF = 1; custom = 352, 240, 1; QCIF = 1; maxbr = 20000
    a = rtpmap:34 H263/90000
    a = fmtp:34 cif4 = 1; CIF = 1; QCIF = 1; maxbr = 20000
    a = rtpmap:31 H261/90000
    a cif fmtp:31 = = 1; QCIF = 1; maxbr = 20000
    a = label: 11
    a = answer: full
    a = content: hand
    a = rtcp-fb: * nack fold
    a = rtcp-fb: * ccm FIR
    a = rtcp-fb: * ccm tmmbr
    a = sendrecv
    m = application 28300 UDP/BFCP
    a = the installer: actpass
    a = confid:1
    a = userid:6
    a = floorid:2 mstrm:12
    a = floorctrl:c - s
    a = connection: new
    m = video 16428 RTP / AVP 97 126 96 34 31
    b = TIAS: 6000000
    a = rtpmap:97 H264/90000
    a = packetization-mode=0;profile-level-id=428016;max-br=5000;max-mbps=108000;max-fs=3840;max-smbps=108000;max-fps=6000;max-rcmd-nalu-size=1474560 fmtp:97
    a = rtpmap:126 H264/90000
    a = packetization-mode=1;profile-level-id=428016;max-br=5000;max-mbps=108000;max-fs=3840;max-smbps=108000;max-fps=6000;max-rcmd-nalu-size=1474560 fmtp:126


    a = rtpmap:96 H263-1998/90000
    a = fmtp:96 custom = 1280, 768, 3; custom = 1280, 720, 3; custom = 1024, 768, 1; custom = 1024, 576, 2; custom = 800, 600, 1; cif4 = 1; custom = 720, 480, 1; custom = 640, 480, 1; custom = 512, 288, 1; CIF = 1; custom = 352, 240, 1; QCIF = 1; maxbr = 20000
    a = rtpmap:34 H263/90000
    a = fmtp:34 cif4 = 1; CIF = 1; QCIF = 1; maxbr = 20000
    a = rtpmap:31 H261/90000
    a cif fmtp:31 = = 1; QCIF = 1; maxbr = 20000
    a = label: 12
    a = content: slides
    a = rtcp-fb: * nack fold
    a = rtcp-fb: * ccm FIR
    a = rtcp-fb: * ccm tmmbr
    a = sendrecv
    m = 16430 RTP/AVP 100 application
    a = rtpmap:100 H224/4800
    a = sendrecv
    m = application 29789 UDP/UDT/IX
    a = ixmap:0 ping
    a = ixmap:2 xccp
    |
    ________________________________________________________________________________________________

    Work of appeal with TC 7.1.4
    ________________________________________________________________________________________________

    SIPMSG:
    | INVITE sip: [email protected] / * / SIP/2.0
    Via: SIP/2.0/TCP xx.xxx.60.133:37491; branch = z9hG4bKe3dfed840a299516919a79e4a54cd707.1; rport
    Call ID: 480ec504782c0ad894929e882a696e74
    CSeq: INVITE 100
    Contact: sip: [email protected] / * /; gr = urn: uuid:6 c 856033-4cbd - 5 b 15 - bb13 - 0715c4a694cd, ob>
    From: "201101102_C40_ServiceDesk" sip: [email protected] / * />; tag = 3ab87b1c0d8b4d9d
    To: sip: [email protected] / * />
    Max-Forwards: 70
    Directions: sip:xx.xxx.1.51; lr>
    Allow: INVITE, ACK, CANCEL, BYE, update, INFO, OPTIONS, CONSULT, INFORM
    User-Agent: TANDBERG/520 (TC7.1.4.908e4a9)
    Supported: replaces, timer, 100rel, gruu, way, way out
    Session time-out: 1800
    Content-Type: application/sdp
    Content-Length: 2842
     
    v = 0
    o = xx.xxx.60.133 IN IP4 3 2 tandberg
    s = -.
    c = IN IP4 xx.xxx.60.133
    b = AS:6000
    t = 0 0
    m = audio 16394 RTP/AVP 107 108 109 110 104 105 9 15 18 8 0 101
    b = TIAS: 128000
    a = rtpmap:107 m4as-LATM/90000
    a = fmtp:107 profile-level-id = 25; object = 23; bitrate = 128000
    a = rtpmap:108 m4as-LATM/90000
    a = fmtp:108 profile-level-id = 24; object = 23; bitrate = 64000
    a = rtpmap:109 m4as-LATM/90000
    a = fmtp:109 profile-level-id = 24; object = 23; bitrate = 56000
    a = rtpmap:110 m4as-LATM/90000
    a = fmtp:110 profile-level-id = 24; object = 23; bitrate = 48000
    a = rtpmap:104 G7221/16000
    a bitrate = 32000 fmtp:104 =
    a = rtpmap:105 G7221/16000
    a = fmtp:105 bitrate = 24000
    a = rtpmap:9 G722/8000
    a = rtpmap:15 G728/8000
    a G729/8000 rtpmap:18 =
    a = annex b fmtp:18 = yes
    a = rtpmap:8 PCMA/8000
    a = rtpmap:0 PCMU/8000
    a rtpmap:101 telephone-event/8000 =
    a = fmtp:101 0-15
    a = sendrecv
    m = video 16396 RTP / AVP 97 126 96 34 31
    b = TIAS: 6000000
    a = rtpmap:97 H264/90000
    a = packetization-mode=0;profile-level-id=428016;max-br=5000;max-mbps=245000;max-fs=9000;max-smbps=245000;max-fps=6000;max-rcmd-nalu-size=3456000 fmtp:97
    a = rtpmap:126 H264/90000
    a = packetization-mode=1;profile-level-id=428016;max-br=5000;max-mbps=245000;max-fs=9000;max-smbps=245000;max-fps=6000;max-rcmd-nalu-size=3456000 fmtp:126
    a = rtpmap:96 H263-1998/90000
    a = fmtp:96 custom = 1280, 768, 3; custom = 1280, 720, 3; custom = 1024, 768, 1; custom = 1024, 576, 2; custom = 800, 600, 1; cif4 = 1; custom = 720, 480, 1; custom = 640, 480, 1; custom = 512, 288, 1; CIF = 1; custom = 352, 240, 1; QCIF = 1; maxbr = 20000
    a = rtpmap:34 H263/90000
    a = fmtp:34 cif4 = 1; CIF = 1; QCIF = 1; maxbr = 20000
    a = rtpmap:31 H261/90000
    a cif fmtp:31 = = 1; QCIF = 1; maxbr = 20000
    a = label: 11
    a = answer: full
    a = content: hand
    a = rtcp-fb: * nack fold
    a = rtcp-fb: * ccm FIR
    a = rtcp-fb: * ccm tmmbr
    a = sendrecv
    m = application 29489 UDP/BFCP
    a = the installer: actpass
    a = confid:1
    a = userid:3
    a = floorid:2 mstrm:12
    a = floorctrl:c - s
    a = connection: new
    m = video 16398 RTP / AVP 97 126 96 34 31
    b = TIAS: 6000000
    a = rtpmap:97 H264/90000


    a = packetization-mode=0;profile-level-id=428016;max-br=5000;max-mbps=108000;max-fs=3840;max-smbps=108000;max-fps=6000;max-rcmd-nalu-size=1474560 fmtp:97
    a = rtpmap:126 H264/90000
    a = packetization-mode=1;profile-level-id=428016;max-br=5000;max-mbps=108000;max-fs=3840;max-smbps=108000;max-fps=6000;max-rcmd-nalu-size=1474560 fmtp:126
    a = rtpmap:96 H263-1998/90000
    a = fmtp:96 custom = 1280, 768, 3; custom = 1280, 720, 3; custom = 1024, 768, 1; custom = 1024, 576, 2; custom = 800, 600, 1; cif4 = 1; custom = 720, 480, 1; custom = 640, 480, 1; custom = 512, 288, 1; CIF = 1; custom = 352, 240, 1; QCIF = 1; maxbr = 20000
    a = rtpmap:34 H263/90000
    a = fmtp:34 cif4 = 1; CIF = 1; QCIF = 1; maxbr = 20000
    a = rtpmap:31 H261/90000
    a cif fmtp:31 = = 1; QCIF = 1; maxbr = 20000
    a = label: 12
    a = content: slides
    a = rtcp-fb: * nack fold
    a = rtcp-fb: * ccm FIR
    a = rtcp-fb: * ccm tmmbr
    a = sendrecv
    m = 16400 RTP/AVP 100 application
    a = rtpmap:100 H224/4800
    a = sendrecv
    m = application 31127 UDP/UDT/IX
    a = ixmap:0 ping
    a = ixmap:2 xccp

    Another problem, indicated in diagnosis on a MX200 device tests, reporting problems of NTP. I tried to choose another NTP server - but this does not solve the problem, and it works with TC7.1.4. In addition to the time and date is wrong on the screen but OK on the touchscreen device.

    In addition, an error is reported on the OSD settings.

    Do you have advice?

    Thanks for help.
    |

    So, what's the problem? You just showed us an INVITATION. What is the configuration of your system? What is the reaction to INVITE him? We need complete diagnostic logs. Is this VCS - C registred? Where VCS - C diagnostic logs

  • Problems with the touch screen of HP all-in-One after upgrading Windows

    I recently updated my version of Windows (64-bit) with system updates and then a full version updated to version 8.0 version 8.1.  After the update is complete, I started to experience a strange problem with the touch screen on my HP Envy Rove.  The screen would flash repeatedly one set of points in the right lower quadrant of the screen as if the simulation random screen button.  There is no way to stop this.  If the screen on a keyboard was pulled up, letters in the place of the flashes would be broadcast in the fields on the screen.

    The only way to stop the flashes of screen has been to go into the Device Manager and disable the HID-Compliant device driver.  It stopped (system generated keys) flashes, but also disabled my touch screen input.  So now the system is usable, but without the benefit of the touchscreen.

    Here is the information on the driver:

    HID-Compliant device

    Date: 21/06/2006

    Version: 6.2.9200.16851

    (input.inf)

    I tried updating the driver, but this seems to be the latest version available.  Go back to the previous version of the driver, could solve the problem, but I could not locate on the support web site.

    Any suggestions on how to solve this problem and re-enable the ability of my touch screen?

    Hello

    Downloaded drivers from the manufacturer will be the most tested and up to date available. The best place to download a driver is directly from the manufacturer of the equipment.

    So I suggest you to install the driver that is available on the HP website for your model.

    Troubleshooting of touch screen in Windows 8

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03488148

    Just reply with the results.

  • Problems with clicking and scrolling when you are using the mouse in IE

    Separated from this thread.

    Original title:

    Problems with clicking and scrolling when you are using the mouse

    I have the same problem.  My touchscreen responds but my touchpad and mouse are unable to save a click in IE.  I need to reboot to rectify.  It seems to be more common when the laptop comes out of fashion 'sleep'.   I tried all the steps above, everything is up-to-date.

    Hello Fred,.

    Thanks for the reply.

    I appreciate your efforts to resolve the issue.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the hardware and devices Troubleshooter and check. Please follow these steps:

    a. press Windows + W keys, type Troubleshooting in the search box and press on Enter.
    b. click on 'show all' and then click 'hardware and devices'.
    c. click 'Next' and then follow the on-screen instructions.

    If this does not help, then use method 2.

    Method 2:
    Start your computer in safe mode and check the number.
    Refer to this article:
    Start settings for Windows (including safe mode)
    http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

    After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

    Greetings, joybelino1!

    Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.

    If you use Bluetooth

    1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
    2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
    3. Restart your iOS device.
    4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
    5. Update your iOS device.
    6. Install the updates to the firmware of your car radio.
    7. If you still not connect, contact Apple technical support.

    Have a great day!

  • Anyone having problems with WiFi connectivity after upgrade to Sierra?

    I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

    No problem with my iphone 6.

    Hello AspDesigns,

    I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

    Search for Wi - Fi using your Mac problems

    See you soon!

  • Problems with mail after switching to macOS Sierra

    Hey all

    After having recently upgraded to macOS Sierra, I am unable to read my mail.

    I get the following error every time I check on "Get Mail".

    There may be a problem with the mail server or the network. Check the account settings "*" or try again.

    The server returned the error: Mail could not connect to the server 'pop1.tribcsp.com' using SSL on the default ports. Verify that this server supports SSL and that your account settings are correct.

    What does this error message mean and how can I solve this problem.

    Thank you

    Hi Michael,

    I see your message that you get an error in the mail indicating that there is a problem with the mail server or the network.  To help get this problem resolved, I suggest that you follow the steps below:

    If mail refers to a problem with the mail server, or the network

    Mail will say that it is impossible to connect due to a problem with the mail server or the network. For example, the message may refer to a connection that has expired, or too many simultaneous connections:

    If you are connected to the Internet, but the connection has expired, your email provider might be affected by a discontinuance of service. Contact them or see their status Web page to ensure that their e-mail service is online. Examples of status pages:

    If the message indicates the number of simultaneous connections, too many of your devices is check your e-mail account at the same time. Quit Mail on one or more of your other devices.

    If you are still unable to send or receive e-mails

    1. Make sure that you have installed latest version of the Mac software updates, especially if the problem occurred immediately after the installation of a previous update.
    2. In OS X El Capitan or later version, you can see a status icon and the short error message in the upper right of the Mail window, under the search box. The message may indicate 'Network offline' or 'Connection failed', for example. Click the message to see more details on the issue.
    3. Check your connection to the Mail connection doctor. It might be able to say more on the issue.

    If you cannot send or receive e-mail on your Mac.

    Take care.

  • iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

    Hello!

    My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

    Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

    What could be?

    Please help me!

    4ntoine

    Here is my model of iMac:

    iMac 27 "mid-2011 model 12.2

    Intel Core i7 3.4 GHz

    AMD Radeon HD 6970M 1024 MB

    OS X El Capitan 10.11.6
    SMC 1.72f2

    Boot ROM IM121.0047.B23

    reset the SMC

    Reset the management system (SCM) controller on your Mac - Apple Support

  • problem with playing the clash of clans

    I'm having some problems while playing the clash of clans on my 2 mini ipad screen does not seem to meet sometimes as if it was some sort of delay so I have to tap several times in order to use a filter or throw the troops on the battlefield.

    Hi Trinitygr,

    Thanks for posting in the Community Support from Apple! I understand that you are having problems with your iPad screen while playing a game. I like to play games on my iPad and I don't see how this could be a nuisance. I'm happy to offer assistance.

    Are you only had this problem when using the app clash of Clans, or does it happen in all applications? I recommend to start by following the steps described in this article:
    If an application you have installed unexpectedly closes, unresponsive, or does not open

    Take care!

Maybe you are looking for

  • the app is only available in the app store from another country?

    Hello I am a Belgian citizen working and living in London (UK) and I used to make photos with a Belgian/Dutch company (HEMA) albums, they have now totally new software that must be downloaded through the app store, but it is not available in the app

  • How to remove part of a Web ActiveX browser window

    I use a web browser window to display the contents of a web application in my LV Panel.  I really want the content to appear as native parts of the front rather than inside a frame.  Is there a method that will allow me to hide or delete the ActiveX

  • How to solve error ID 0X8DE20003

    Always security alert appering I can't send or receive mail

  • Chinese characters in the painting

    I have Windows Vista Home Basic with Service Pack 1 and the regional and language than English (United Kingdom) setting. When I "Save" or "save under" in the painting, the dialog box appears to have Chinese characters in the title. If I exit without

  • Sanyo scp6780 usb modem driver

    I'll try to find the driver of modem usb for windows 7 Home premium