Problem with URL localhost Web Server page

Similar Questions

• Problems with access to Web sites in the laptop of my mother, both wireless and ethernet connections

  Original title: Internet issues

  My mother's laptop has suddenly stopped to access Web sites. I tried to explore, Firefox and Chrome using both wireless and ethernet... connections we both century link and I tried the two houses... my works laptop on both networks. All three browsers connect to the internet, but not all pages opens. I ran the store and he told me that I should look online for more help... which is not the case, but it cannot determine the problem. Any ideas?

  Hello

  Welcome to the Microsoft community.

  I understand that you have a problem with access to Web sites. We apologize for the inconvenience caused to you and appreciates your efforts to try to resolve the problem.

  I would like to know the details below to help you better

  1. Do you receive an error message/code when you access Web sites?
  2. Do you think that any symbol with exclamation on the icon of this internet access on the taskbar (right)?

  I ask you to try the steps in the Microsoft Help article below and check if it helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Also I ask you to reset TCP/IP and check if it helps.

  How to reset TCP/IP using the NetShell utility
  http://support.Microsoft.com/kb/299357/en-us

  Keep us updated on the issue to help you better.

• I'm having a problem with the pictures on some pagies partially of fully duplacating other tiles nearby. Only occurs with Firefox.

  I'm having a problem with the photos on some pages partially to duplicate completely other tiles nearby. Only occurs with Firefox. The thumbnails are refreshed when I move the cursor over them, but again distort when you scroll the page. I have a few images, but cannot up-load them on this page of support for some reason any. Maybe I can email you if you need?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check the preferences of network.http. * on the topic: config page and make sure that they have the default value.
  You can restore the default user set prefs ("BOLD") via the context menu.

  • http://KB.mozillazine.org/about:config

• The network connectivity status appears as only 'Local' error message ' there may be a problem with your domain name server (DNS) configuration "when trying to diagnose the problem.

  Original title: connection internet wireless Sony Vaio problems

  I get connection "local only" and then when I try to diagnose and repair he said: "it may be a problem with your domain name server (DNS) configuration. He said that this problem cannot be fixed automatically and I have no idea what to do.

  How do you connect to the Internet (method/ISP)? What is a stand-alone computer or a corporate work station? What is the status of virus/malware of the machine? Please give us more details so that we can help you.

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  Troubleshooting Internet connectivity

  1 answer to the first and second troubleshooting Questions:

  First Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

  Make sure that the computer is clean - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Many variants of malware will allow a proxy server if you are unable to Internet. Go to control panel > Internet Options > connectivity tab > LAN button. If all is selected in the section Server Proxy, uncheck the box, apply/OK outside.

  2. If nothing has changed and that the computer is clean, what antivirus/security programs are you running? Have AVG 8 or Zone Alarm? These two programs have had updates that caused Internet connectivity problems. I don't recommend either of these programs, but if you want to keep check them on the mftrs.' support websites.

  3. If #2 is not applicable:

  a. unplug the router.
  b. disconnect the modem. (If you have a DOCSIS 3 modem with battery backup, press the Reset button to reset the modem so the lights go out).
  c. wait 60 seconds.
  d. plug the modem (or wait until the reboot is completed) and expect that all the lights are on.
  e. plug the router and wait until all lights are on.

  You now have an Internet connection? Otherwise:

  4. connect your computer directly to the cable/DSL modem. You now have an Internet connection? If so, there is a problem with the router. They do not last forever. Replace it.

  If there is no Internet when your computer is connected directly to the cable/DSL modem, call your ISP because something is wrong with the cable/DSL modem or your Internet service.

  MS - MVP - Elephant Boy computers - don't panic!

• Problem with the HP drivers Download Page

  Don't know where best to post this topic.

  I have problems with the HP driver download Page. Using the Chrome browser, I installed the HP product detection utility. Once installed, I admitted that it runs, and it correctly detected my HP computer and the details about this poster. A detail that he displayed was the guarantee being exceeded.

  Since I had hardware problems and had to replace the hard drive and reinstall Windows, I wanted to make sure that my computer has all the HP drivers and software required. This information would not be displayed. At first I thought it was because I had an active browser add-on. I've disabled and reloaded the page. This is where I'm having the problem.

  The product has been detected once more, but nothing happened when I clicked on the button search solutions for the detection of the product page.

  You have found the difficulty that has the utility.

  I never had a large measure of success with the utility unless I use Internet Explorer. I rarely use Internet Explorer.

• Problem with script on the master page

  So I have my build script of the unique number bit that I have posted here before... it's on the Initialize event of the field.

  
  

  If (this.rawValue == null) {}
  var d = new Date();
  this.rawValue = parseInt(d / 1000);
  }
  else {}
  this.rawValue = rawValue;
  }

  Which works very well if on the body of the form, but if I put it on the master page it re - initializes (and changes the number) whenever a subform gets shown/hidden. No idea how to stop it from doing this? I tried it on a few other events without a bit of luck.

  I came across another problem with this script, a field called 'Date' was interfering with the script - throw an error "the Date is not a constructor. Is - this normal (function/field collision)?

  Hi Jono,

  I had problems with script within the Master pages before. What I've done in the past, it is a textfield hidden in the main pages of script with overall binding (which featured many here today); then same name textfield in the master page picks it up.

  Good luck

  N.

  Post edited by: Niall O'Donovan

• Problem with flash based Web pages and re - install windows

  Hello!
  I bought the Toshiba NB100 and use the netbook for a few weeks. At first, it worked all fine and exceeded my expectation.
  However, since one some time he experiences trouble with performance based on flash Web pages such as youtube and etc, which makes it not not possible to stream any video smoothly. Basically, it's a fast-paced photo slideshow :(
  The problem here is certainly not the performance mode, which is set at the maximum.
  I tried to get through this problem with re - install the operating system, which is windows XP, but after transfer of the content produced the DVD on a flash drive recovery, the system does not have a configuration menu. It gives me an error report instead.
  * I put the following qustions you: *.
  * 1. What can be the reason for slow running applications? *
  * 2. I'm doing something wrong when you reinstall windows? * Ts here a simple manual for the resettlement of the op?
  Comments, suggestions and advice will be much appreciated and I thank you in advance.

  So you have installed a generic version of Windows XP?

  You may have forgotten to install the drivers graphics and other critical drivers such as the Intel Chipset driver.

  You see problems in Device Manager?

• Problems with the initial web page et al.

  Hello

  I just downloaded Foglight and created a virtual machine from the file .ova.

  Logging on to the server Foglight has worked since the console - I need to manually change the IP address.

  I ping the Foglight Server from a computer on a different subnet.

  Following the instructions I can connect with a web browser.

  This fails as if the server is not active.

  Port 80 seems to be open, but tomcat is running.  Netstat - ano says tomcat has no open ports.

  On a likely related note, when I try to use putty (ssh) to the VM guest, I am challenged for a password, and

  Enter by default of the doc to install, but it does not work with access denied.

  When I use ssh from a Linux box on the subnet, it records the machine, then abandon the connection.  The following connections for this host fail with a "man in the middle" warning.

  Ideas?

  Thank you-

  Rob

  Hi Rob,

  When you have changed the IP address, you use the /usr/local/vkernel/scripts/changeIp.sh script?  If you tried to manually set using other methods, Tomcat configuration files will not be updated, and if the web server will not respond.

  The login/password for SSH usage is vkernel/vkernel.  Some people type it as 'vkernal' but it's 'vkernel.  Does not root via SSH.  You will need to "known" to the root once you have logged in as vkernel.

• Newbie problems with getting a local server from the BFC set

  It started in another post by me about what I thought, it was a problem with port 8500. I had looked at the getting started with video CFB, and on that, he used localhost as the server name and as the host name. He then assigned port 8500 as the Port of the Web server.

  When I do that it is in the windows as stopped servers. If I try to start it the error I get is

  'Start-up localhost' has encountered a problem

  Make sure that the server is not already running or any application does not use the port of the Web server.

  So as an experience, I changed the port 80, because the admin page doesn't work in http://127.0.0.1/CFIDE/administrator/index.cfm

  The server at the bottom of the BFC window then shows a server running.

  I create a small "Hello World" index.cfm page and when I touched one of the tabs of the browser, Firefox and IE in my case, I get the following error.

  Error during preview generation:

  There is no server configured for the project myproject , to which belongs the index.cfm file. Configure a server in ColdFusion in ColdFusion server settings before you continue.

  What Miss me?

  Thank you

  Dennis

  You must specify the BFC BFC server must use in order to preview the file.

  If you need to associate a server with this project. To do this, right-click on the project-> properties-> ColdFusion server settings.

  Here in the "Server" dropdown list, select the server that you have added in CFB.

  Once this is done, make sure that your project is in the root of the document from the server in your case, that could be the Inetpub\wwwroot.

  Once this is done, the preview should work.

  -Bhakti!

  Adobe ColdFusion team

• I have a problem with 'url not valid and cannot be loaded' also the site accuweather on my toolbar does not load, all I get is a sying note "connection error". The google homepage, I've always used is empty at the start of firefox.

  I had a problem where firefox crashed while the closing bbc iplayer site last night, I reebooted firefox and everything seemed in order until this morning. I cannot use the default Web page of google but you can use the uk version. When you try to solve the problem I get the "invalid message url."

  • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Solve problems with plugins like Flash or Java to solve the common problems of Firefox

• Problems with the Parent and child Pages...

  I created a parent page with several pages of the child, but when I transferred to my host FTP pages do not come to the top in the hierarchy in the URL bar. I want it to be "www.website.com/parent/child.html" but they come as 'www.website.com/child.html '.

  How can I change this? I thought that by creating a page parent to the child which would automatically when loading pages. Help, please!

  Thank you!!!

  Muse currently publishes all the pages in the root directory of the Web server. It does not create a folder structure based on the structure of the site defined in Plan view. The structure of the site defined in the Plan view is used by the Widget Menu to generate Menus correspondents and submenu entries.

  Hope that specified in the query.

  See you soon,.

  Vikas

• Problem with Log in user server behavior

  1.) ok, I'll build a basic login page. I am trying to use this built in server called 'User login' behavior that comes with Dreamweaver 8 box. and I use my local ColdFusion as my server (http: http://localhost:8500 /). I have a Table in an Access database called Employee. Basically, I built a registration.cfm page that allow the employee the opportunity to register. Two of the fields on my registration page are called obviouly "username and password". When the employee enrolled, this information is inserted in the Employee Table. It works very well because I checked simply by opening the table in Access to verify that the data were inserted correctly in the fields after that I joined a fake employee.
  
  2.) now to the login.cfm page that seems to be the problem. Two fields on this page. username and password... These are obviously linked to the username and password fields in the Employee Table. "When I get the username and password that I registered with I must be addressed to index.cfm if the validation is successful and if it does not then the login.cfm page should update with an error message valid' valid username and password (for now). the works of the defective part. The problem is alhtough b/c work every time THAT the data that I registered with is in the Employees table, as I said earlier, I'm never able to connect. This is true for all the false emplyees I recorded with so far. If it helps, I do not use AccessLevels option in my page login.cfm, only the user name and the password. That is to say here are my values, when I click on the "Log In User" dialog box when I chose this server behavior:
  
  Getting the form entries: LoginForm
  Username: username
  Password: password
  Validation using the source: connDorknozzle (my datasource)
  Table: C: / Dorknozzle.Employee
  Column of user name: user name (this is what they are called access)
  Column of password: Pass (this is what they are called access)
  If the connection is successful, proceed to: index.cfm
  If the connection fails, go to: login.cfm
  Restrict access based on: user name and password (checked)
  
  I also am attatching the code on this page below...
  
  
  
  
  Help! It does not work

  Bad HA... This article explains everything. Basically, if you want to use this behavior, you create a file called Application.cfm and place it in your directory with a minimum of code tree. Something to do with the Session Variables.

  See this article from docs direct: http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_16564

  Minimum amount of code, you must have in this Appliation.cfm file is the following:

  Otherwise the user serverbehavior log is useless.

• FMS can co-exist with an IIS web server?

  Hello
  I searched posts and do not see someone else with the problem of sharing port 80 with the basic website services. Maybe nobody tries to run IIS and FMS at the same time?
  
  I installed 3.5 accepting the values by default and does not install Apache for it because I use web sites on my Windows Server 2003 by using IIS.
  
  After the installation of FMS, I was able to open the administration space and view video samples locally so that it resembled a successful installation. But none of my sites were served on a more thorough review, upward.
  
  I expect a conflict with the port 80 and IIS wanting him as FMS server who want the same port.
  
  Is it possible to have a server continue to use IIS to serve web pages and also have FMS on the same server, use Flash streaming?
  
  At this time I use the development version (no license yet) of 3.5 to set up examples of what improvements can be made with the FMS. After getting customers interested and help ready to compensate the price then move to release an instance under license. But if she needs it's own server, which is not in the budget right now.
  
  Therefore, it is possible to run both on the same server (IIS web server) and FMS?
  
  Thanks in advance to all those he has managed this condition and can provide more detailed information.

  Yes, FMS, and IIS can coexist on the same server.

  1. you need two IP addresses, one for FMS and one for IIS

  2. you will need to bind FMS to one of the IP addresses in fms.ini. FMS binds to all default IP addresses.

  3. you must link your IIS virtual servers to another IP address (IIS binds to all IP by default)

  4. If you use IIS version 6, you must use httpcfg.exe to disable socket pool on IIS (search the microsoft KB... There is an article about this somewhere). If you do not, your IIS virtual servers will ignore the settings in the Internet Information services manager and continue to bind to all IP addresses.

• OfficeJet 6700 DHCP causing problems with airprint and web services

  I find it kind of interesting that this printer does not properly with DHCP enabled by default and more easy to use configuration.  My new printer seems to require to manually set the ip and dns settings before the features of web services or airprint worked correctly.  It was strange because printing from a PC and iMac worked well, it was that only the web services feature (unable to connect to the server) and the airprint from IOS devices failed (printer shows up but just disappeared rather than printing impression actually).  Someone else has seen this and not do anything to solve this problem?

  The problem with this is effectively resolved through static DNS, generally. The reason it is and not with other functions, is that our print servers that connect you with are able to communicate more easily with some DNS configurations on the other.

  For this reason, HP recommends generally defining the DNS for your printer on the parameters of Google DNS: 8.8.8.8 & 8.8.4.4.

  Does that answer your question?

  Have a great day!

  

• Problem with URLS in InDesign to PDF

  I have two links in my InDesign document.

  When I output to an interactive PDF and open in Adobe Reader, the link is there, but I get a message that "Acrobat does not connect to [URL].

  I have a clickable link in the document, then I right click on it and in the interactive "Add URL" box do I've done several times, so I am confident that the URL is correct. one of them is my own Web site.

  What I am doing wrong?

  Certainly somewhat ironic!  However it still does not seem good, you say that Acrobat lets connect you to any URL but the drive does not work?  If Acrobat doesn't prove what you do in Indesign to create the link are OK and this is a problem with the drive.  If you can post a link to your file and someone else can check it out, it might not only your player.  BTW, you should be able to check the same security setting preference in Reader as well.