Problem with USB 3.0 Windows.

Similar Questions

• Problem with USB HUB using Windows 7 on Bootcamp

  I have an iMac when I installed Win 7 with Bootcamp. I have problem with USB hub. If I connect USB devices (printer, iphone... etc...) directly to my computer, it works without any problem. But if I connect them through USB hub, that they do not work properly. The sound instantly invites you, but certain peripheral functions partially and some not at all. I tried several USB hubs... same problem for all. Any solution? Thanks a lot for your answer.

  Hello

  I suggest you to see link and check.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  I also suggest you to contact the apple support and check.

  http://www.Apple.com/support/

• Problems with USB devices in Windows XP Mode on Windows 7 Pro

  I have a Palm Zire 21 that I use with ACT! Contact Manager to keep track of my appointments.  I was able to sync the Palm with my ACT database until this week. The device appears on the list of USB devices, but does not connect to Windows XP mode.

  I used this device in XP Mode since August without any problem.  Last week, I started having problems with the integration of XP features and had to uninstall and reinstall the integration features a few times.  I think I have a corrupted somewhere driver.

  Any help would be appreciated.

  No need to comment unless you have more insight.

  I solved the problem myself.  In XP mode, I went to the Device Manager and scroll down to USB controllers.  A virtualization USB bus drivers showed a problem.   I uninstalled this device and then managed to reinstall my Palm correctly after connecting it to the USB port, and then going back to the menu at the top of the XP USB mode screen and hit connect when I saw my camera.  The device connected in XP automatically and I was off to the races.

• problem with USB driver in windows 8

  I use winsows 8 in hp probook 4440 s with processor i3.  Recently I have a problem with my usb ports 3. they do not react like usb 3 and most of the time does not at all. I looked for a host controller driver expandable usb 3 for windows 8, but can't find anywhere because it is built with windows 8. Where can I find the driver or what can I do now?

  Hello

  Check with HP Support, their drivers and documentation online and ask in their forums
  on known problems. The drivers are from HP. update the BIOS, chipset and the major
  device drivers embedded and separate that may affect the USB.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ====================================================

  Update driver and troubleshooting details (don't forget to check for BIOS, chipset,

  (and other drivers):

  Microsoft - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Check with the manufacturer of system (manufacturer of motherboard for customized systems) updated
  the BIOS, chipset of low level driversand the major device on-board and separate
  drivers. Execute DriverView - value VIEW drivers Microsoft hide - updated from those
  without drain to their name.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  To check system drivers manufacturer as replacements and camera manufacturer who are most
  current. Control Panel - device - Display Adapter Manager - note the brand and
  fill out the template tab of the driver for your card video - double-click - write down the
  the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
  certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
  stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if
  3rd party with their own software and drivers and the other main device drivers you
  a.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
  Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
  (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
  After each installation.

  Always check in the Device Manager - drivers tab to be sure the version you install
  actually arises. This is because some restore drivers before the most recent is installed
  (particularly that audio drivers) so install a driver - reboot - check is to be sure
  installed and repeat if necessary.

  Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
  manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite M70-190 - problem with USB

  Hello!
  After you uninstall Windows XP and BIOS update, I have a problem with the USB ports. My work does ' t of USB flash drive. Windows also find a USB flash drive, but I can't find it in "my computer".
  If anyone idea about this problem?
  PS, External HARD drive works perfectly, as the USB mouse and USB WiMax modem.
  I m hoping someone out there can help with this problem.

  If I understand you well you don't have problem with USB port, but with a single USB device. Right?

• BSOD problems with a computer of windows 8

  Hello. I've had my computer for over a year now, and since about a week after I got it I had several problems with it. Initially, I had problems with usb devices works sometimes not. In this case I have to restart several times hoping to rework them. Over time, that has become less of a problem, but still exists. Then when I play games on my pc as the League of legends and world of warcraft games themselves would break several times. I also had problems with different programs crashing like Skype, google chrome and also blocks flash in chrome. Soon enough my whole system was crashing with BSOD messages or sometimes would be only to randomly restart or freeze.

  Here is a list of the different BSOD:

  irql not less or equal, page fault in nonpaged area, kmode exception not handled, pool header corruption of infrastructure critical bad memory management

  Unexpected kernel mode trap and driver irql not less or equivalent. With several different drivers be blamed.

  Now its to the point where I'll watch a live stream on twitch.tv or a video on youtube and it will crash after a few minutes. It happens more often in these situations, or in game, but it can also happen randomly even if soon as just start or idle.

  I tried many different things to update many pilots to replace my ram and hard drive as well as full reinstalls of windows and system different restore points. I wanted to ask you on this forum about it to see if it has what I can do to solve this problem before I send in for repair because I prefer not to be without him for an extended period of time.

  Thank you for hearing me.

  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  2-Memtest. (You can learn more about running memtest here)

  
  

  Co-written by JMH3143

  .

  You have an older driver that needs to be updated. Associated with MBfilt64.sys Audio driver of Creative Technology Ltd.

  You must also upgrade to win 8.1 at least.

• problems with 5.01 and Windows 8

  Hello

  I've been having some problems with the 5.0.1 and Windows 8 and wanted to see if anyone knew these.

  1 aero glass does not work correctly. I originally had problems with Office 2013 and which was fixed by disabling hardware acceleration for office only

  2. problems with USB currencies when 3 USB is enabled. The custom of the machine is taken out of service and the machine locks up frequently. As a solution, I changed the virtual computer to use only USB 2.0

  Thank you!

  Aero has not been removed in the RTM and retail of Windows 8?  I thought it was.

• Problem with the installation of Windows XP on the Satellite A200-1RK

  Hello!
  I ve you have a problem with my laptop.
  I would like to install Windows XP SP2 instead of Vista, but I had a problem with the hard drive,
  Windows XP Installer cannot find the hard drive. It is problem with drivers disk, but the site of tohsiba I can´t find my laptop and the disk for XP drivers.
  Why?
  Can someone help me?

  Maybe I can use drivers from another laptop A200 series, but which?

  Hello
  a good explanation how to install XP on a SATA machine can be found here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29342

  Welcome and good luck

• Big problems with USB devices

  Since I upgraded to El Capitan I have several, serious problems with USB devices:

  1 USB hard drive: everything by watching a video from an external hard drive, the hard drive will be to disassemble all the minutes, the video will be of course hang and it takes 45-60 seconds until the drive reconnects. I also can not boot from any external hard drive more. Booting from a USB key works fine.

  2. I can't transfer my Sunny BT11 of beam data more. The Sunny Beam is a device that records the data of my photovoltaic plant. The overview of the system he sees when connected via USB, however he is not recognized and so I can't transfer data files. Also, it makes not a difference if it is connected via a USB hub or directly, the two versions do NOT work. In the Finder preferences, all devices are controlled to display on the desktop.

  The two scenarios always perfectly work with my Mac mini that has not been updated and uses Mac OS X 10.10.

  Hello Gulliver,

  It seems that if you live with loss of connection of your USB devices since the installation of Mac OS X 10.11 El Capitan, is that correct?

  I suggest that you are troubleshooting by following the steps in this article - OS X El Capitan: If a USB device does not work

  Thank you for using communities of Apple Support.

  Sincerely.

• problem with babylon runing on windows 8-storage initialization failed (error 10)

  problem with babylon runing on windows 8-storage initialization failed (error 10)

  Hi Shlomy,

  1. when exactly you get the error message?
  2. do you have an error message?
  3. are install you authentic version of Babylon?

  This issue would have occurred due to some third-party programs, the origin of the problem. I suggest you perform the clean boot. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  If the problem only occurs with babylon click here to send a request to the Babylon 8 support team.

  Post us the results after trying the steps above.

• I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.

• I have a problem with photoshop cc in windows 10

  Hello

  I have problems with photoshop cc in windows 10. I am not sure if the problems are related to what windows 19, but certainly, the problems got worse since. (My computer runs on windows 10. At an i7 processor, NVIDIA® GeForce® GTX 965 M, the DDR3L 16 gig memory, the GDDR5 2 GB graphics card, a card of 256 GB ssd and 1 TB of hard drive). I don't think it's a problem with my computer.

  I am currently working on a project where I need to cut some parts of the photo, that I will use it later. But I'm having the problem now, some photos displayed as it should. And some are not. They seem to be grey. Or there is some kind of white/gray block above them. It is as if is not available to the loading screen (?). If the object is there, but just does not appear right. I just put a few screenshots here that show the problem. I hope someone can help me with this. Because I can't finish my project with a photoshop which does not work at height.

  

  

  
  

  
  

  I really hope that anyone kno w s, what the problem is and can help!

  Hi Editjo,

  Greetings!

  This seems to be a graphics card problem.

  Please disable the graphics processor in photoshop, and then try again.

  Open Photoshop

  Click on edit-> preferences-> Performance

  Uncheck use graphics processor

  Click OK

  Close Photoshop and re - open and then use the way you did that.

  Also, please share the exact version of your Photoshop.

  Concerning

  Jitendra

• problem with photshop cc monitor windows 8.1 k and 4 to a resolution of 3840 x 2160

  can anyone help

  I have a problem with photshop cc on windows 8.1 and 4 k display to a resolution of 3840 x 2160 when I launch photoshop cc, everything is very small and I don't know how to get the program to the right size

  Install Photoshop CC 2014 and turn on the preference of the user interface scaled by 200%.

• Optical USB mouse problem with Portege R100 on windows XP

  We have three laptops Toshiba Portege R100 currently giving problems with mouse optical usb from Toshiba.

  When starting the laptop, that the mouse is not recognized by windows. Before and after will be identified in the mouse will not respond while Burns led.

  The mouse will be recognized after re - plug in the USB port.

  We have updated versions of bios to the latest version. (1.4)

  Another mouse (USB optical) works OK without problem.

  We have removed the drivers and reinstalled by windows plug-and-play process, but it does not work.

  Is this a known issue?

  Thanks in advance

  Hello
  would it be possible that the USB mouse has high power consumption?

  As far as I know, there are a load of maximum intensity for each USB Port.

  Do you know how much power (intensity) needs to this mouse?

  Good bye

• Window vista xps 420 problem with USB ports.

  I have problems with window vista dell xps 420 machine, all USB ports are not recognized, unless the computer is restarted or rebooted. anyone has a suggestion.

  Hi Miguelsmith,

  1. When did you start to question?

  2. you remember to make changes to the computer recently?

  You can uninstall and reinstall all USB device manager entries and check if it helps.

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  You can also consult the following article:

  Tips for solving problems of USB devices

  Hope this information is useful.