Problem with USB port and touchpad satellite A135-S2386

Similar Questions

• Satellite C650 problem with USB ports

  Hello

  I have a problem with my laptop, with my USB ports.

  A few days ago, I plugged my mp3 to charge its battery. I did when system Windows began and after a few ports seconds has stopped working. They work for one to five minutes after starting my computer, but only after my laptop's turn off for a few hours at night for example.

  They work fine and all of a sudden we hear the sound of a disconnected device and usb ports turns off. I tried many solutions but nothing worked. I removed all the USB ports in Device Manager.

  I checked in the BIOS, but everything seems to be okay. I tried to disable the disconnection of usb ports to save energy, nothing. Tools that have been provided by Toshiba to check hardware see as usb ports work correctly. Only usbdview program sees as unknown device, I tried to uninstall it through this program but still nothing.

  You have an idea, what could happen? Or if there is no possibility to fix without service visit?
  I would appreciate your help.

  Hello

  Have you tested these ports USB plug a USB mouse or a USB keyboard?
  These devices work properly?

  I don t think you need a visit to the service.
  I think that it s just a software problem
  Given that the USB ports are controlled by the chipset, I would recommend reinstalling/updating the chipset driver

  The alternative is a bit drastic, I think about the recovery of the laptop...
  It might be possible that the registry has been confused upward or some 3rd party software preinstalled on the laptop could affect the USB ports.

  I remember that my USB ports do not work after installing iTunes.
  I had to reinstall the operating system once more to get the USB port work even more funny is that I installed iTunes once more and USB worked correctly

• PROBLEM WITH USB PORT

  I HAD PROBLEM WITH MY (USB) PORTS... WHEN I CONNECT DEVICES WITH MY COMPUTER, IT SHOWS THAT THIS MOTTO IS NOT RECOGNIZABLE TRY SOME OTHER CONNECTION FEATURES... I CHECK MY DEVICE MANAGER AND HIS WATCH THAT THE DEVICES WORKED PROPERLY I WASN'T THE PROBLEM, IT IS... HELP PLZ

  Simple method is to unplug all your usb device, turn off your system (power off) press the power for 5 seconds (while it is turned off), then turn on your system. Leave the window and then try to connect your USB device one by one... Should be detected and installed, if necessary.

• Window vista xps 420 problem with USB ports.

  I have problems with window vista dell xps 420 machine, all USB ports are not recognized, unless the computer is restarted or rebooted. anyone has a suggestion.

  Hi Miguelsmith,

  1. When did you start to question?

  2. you remember to make changes to the computer recently?

  You can uninstall and reinstall all USB device manager entries and check if it helps.

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  You can also consult the following article:

  Tips for solving problems of USB devices

  Hope this information is useful.

• Problems with external monitor and the Satellite U200 - 10 d

  I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

  The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

  PC VGA up to 1440 x 900 non-interlaced
  Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

  Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

  HM, it's a nice solution, I have a friend with a similar problem.

  We will try your suggestion, snipe and perhaps give feedback if it worked for us.

  Welcome them

• timed equipment digital input with usb port and windows

  Hello

  I have a data bus 16-bit I read in a computer windows laptop. There is a strobe data to tell me when to read the data I want. The STROBE will remain high for 1 time of speech to 10 Mbps (about 1 microsecond) the flow rate is much lower than the speed of the bus. I looked into the usb-6501 but it does not support hardware timing and mark will not work at this speed. Is there a usb device that will do it? Maybe a pc card? FireWire?

  Please don't send me to pages on device selection. I looked and I couldn't find what I think I want to.

  Thank you

  Charlie

  Hi Charlie,

  The sampling rate overall max for USB form factor is 1 ms/s or 1.25MS / s for a single channel. The box USB-6251 takes in a 16-bit input. For higher sampling rates, you will need to use a PCI or PXI form factor.

• Can I set up my printer with USB port and wireless?

  Yes, you can connect your printer wirelessly to the top and the USB. If you have 1 computer connected to the USB printer, you can also download the software and drivers for computer #2 and wireless connection.

  On the printer, you will need to put it on the network (router).

  If you need assistance, please be sure to ask. You can connect several computers to the wireless printer, but could only be plugged into the USB cable.

  Hope this helps everyone.

• Satellite M70-190 - problem with USB

  Hello!
  After you uninstall Windows XP and BIOS update, I have a problem with the USB ports. My work does ' t of USB flash drive. Windows also find a USB flash drive, but I can't find it in "my computer".
  If anyone idea about this problem?
  PS, External HARD drive works perfectly, as the USB mouse and USB WiMax modem.
  I m hoping someone out there can help with this problem.

  If I understand you well you don't have problem with USB port, but with a single USB device. Right?

• Problem with the display of pictures of USB ports and CD player!

  I'm having a problem with my USB port and CD player.  I tried to put a USB stick and card reader in both slots USB and a CD in the CD drive, and whenever the prompt appears, as it did before, asking me what I would like to take.  In the box gray top of page it says "Windows can perform the same action whenever you insert a disk or connect a device with this kind of file:

  Photos

  What do you want Windows to do? »

  Then in the white box below, it is totally blank, without options, where, as he used to give me several options.

  Can someone help me please?  I would really appreciate that I have a photo tour to finish as soon as possible, and I need to get my pictures on the PC!

  Thank you very much!

  Hello

  · What is the service pack installed on the computer?

  · Do you have any software installed on the third CD burning?

  · Do you remember all the recent changes on the computer before the show?

  1. If you have any software installed on the computer of third-party CD burning temporarily uninstall the software and check the results.

  2. you can also run the Autoplay Repair Wizard and check if it helps. You can download the tool from the link below: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=c680a7b6-e8fa-45c4-a171-1b389cfacdad

• Satellite A300 - USB port and fingerprints issue

  Hello

  I'm starting this thread that I have problems with my fingerprint reader and my USB port.

  I have a Toshiba Satellite A300-C01 laoptop. It was purchased in September of last year. I have not used it much except for the first week I had it, I've been away (Overseas), and I didn't take my laptop with me (I took a former I). There is no chance that the laptop has been used so that I was absent because I live alone and that the cell phone was simply sitting in the computer room.

  I started using it again about 3 weeks. Around a week ago, I noticed a pop-up (bottom left of the screen) telling me that a USB port had problems. I put my FlashDrive on the first USB port and at first, it was not recognized. I tried with another flash drive I have and who has been recognized. However, every time I start the computer I get who pop up telling me that there is a problem with the USB port.

  I also met a problem with the fingerprint reader. A pop up appears in the lower left side of the screen and say that the fingerprint reader was having problems. Happened since then that the problem with my USB port began to appear. About an hour ago, I checked the Device Manager and the fingerprints fingerprints/biometrics scanner does not appear in Device Manager.

  Has anyone else had this type of problem?

  What did you do to solve it?

  I would appreciate comments that I have no other choice at this time until Monday when the Toshiba support is available (they are available Monday to Friday).

  Thanks in advance,

  Deanne.

  First of all, you should try to update the chipset drivers and software of fingerprint. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If it doesn't work you should try to update the BIOS. Check the Toshiba site for an update.

  In the worst case, you must reinstall the laptop with the Toshiba recovery disc. So you can make sure if it s a hardware issue or not.

• Satellite L870: Problem with USB to serial interface with FTDI chipset

  Hi all

  bought a L870 year last to run software amateur radio via USB to the serial interface.
  Interface uses the FTDI chipset.

  The problem I have is that the switch on the led on the interface flashes green to red several times to indicate that it works, but then must remain on green but task on every minute she goes through the same process again.

  All the controls on the drivers and the Manager of devices indicates that everything is ok. No problem with interface on computers laptops happens or advent.

  Is there anything on the Toshiba laurys usb ports every minute.

  Thanking you in advance for any ideas

  First of all, I must say that there are different models of L870 Satellite on the market supporting different hardware and software. Some are preinstalled with 8 and some Win with Win 7.

  In addition the L870 supports USB 2.0 and USB 3.0 standard.
  If you recommend to check the different USB ports and check if your software works correctly with the USB 3.0 standard.

• Satellite Pro C650D - problems with the audio and game controllers

  Hello

  I recently had problems with my microphone and speakers/headphones and game controllers.
  Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Stakeholders sometimes still work when I connect headset.
  Some of the sounds are still coming through the speakers while some coming through the headphones.

  I have a usb game controller which also did not work everything properly.
  If I assign buttons in the program that they do not work in the game.

  All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.

  Any body have similar problems or know what to do better?

  See you soon
  Laurin

  Hello

  Can you please send some details on the laptop model and the system you are using?

  With regard to the issue of sound/mic:
  > The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Are you talking about internal microphone or external? This only happens using Skype?
  In your case I would test the microphone using different applications to make sure that is not a Skype related issue.

  > Yet sometimes the speakers work when I connect headset.
  I recommend this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65295

  The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
  She wrote:
  + In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
  + There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. +

  + So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+

  Regarding the game controller:
  > I have a usb game controller which also did not work everything properly.
  > If I attribute buttons in the program, they do not work in the game.
  I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller.

• Compatibility issue with stereo w/USB Port (and radio too) with the "rocket" GB 2

  I bought a 2 GB rocket. In MSC Mode, I downloaded a few songs and I went to connect to my Sony MHC GT222 (with the USB cable), and he said "No Media". Read the manual, I found that the MHC can only read on devices FAT16 or FAT32. My question is this:

  Can I format the "rocket" in FAT16 or FAT32? Then what? Download a firmware update, update day, then format the device menu?

  Or should I just format the device menu? The unit is Sony too, so the same restriction applies.

  Oh, and I can plug a 4 GB microSD card in the "rocket" GB 2? When I bought it, told me that it can only support 2 GB microSD.

  Thank you for your time.

  I believe that I have found a workaround. Please have in mind that it is a Sony stereo or a USB car stereo.

  And remember also that Sandisk did not test compatibility with Sony, and so this workaround might be replaced by a firmware update.

  It worked for my Fuze 2 GB.

  • Have a LCD card and put it in the slot. Preferably a 4 GB, 8 GB or 16 GB, if you have the resources. Reasons later.
  • You connect Fuze on a USB port.
  • Under Windows XP, my computer appears a Sansa Fuze removable drive (say: and a removable drive (let's say I the removable drive after the "rocket" is the LCD map.))
  • Now, the removable disk in a directory called MUSIC (usually the "rocket" already done this a when you plugged the micro card) drag and drop all the music files you want to access.
  • Remove the "rocket".
  • Wait so the "rocket" updates the music database.
  • With the USB cable, connect the rocket in the Sony stereo / car stereo. Press Play. The player is available as a silent reader, and music should start playing.

  Why the card must be equal to or greater than 4 GB? Because these cards are formatted in FAT32, and these materials are accessible by the Sony with USB ports. Why with a card? Because the Sony apparently are programmed to recognize a player as a SOLID-STATE drive or an adapter for an SSD, not until the case of the "rocket" (not the technical details, but it's more understandable) and in this case the Sony, even once, apparently recognizes the "rocket" as an adapter for one SSD drive, so the internal memory is invisible. A Pro with this is that the "rocket" can be used in a way as a music for personal tastes in the internal memory and music for work in external memory if you have a Sony with USB port in the car or at the office.

• Can not use the USB ports on my Satellite P10

  I have a laptop Toshiba Satellite P10 3 years computer that has 3 USB ports. None of them works although the power is coming from them than my external mouse upwards but lights does not work. In Device Manager it says that everything is working ok IE all the drivers, etc. I was told that it's probably the motherboard?

  Maplins it's a software problem. I tried a PCI card with USB port but they no longer work. The PCI location is fine but as my wireless adapter card works from there ok. I restored the computer 3 times and each time the USB ports do not work.
  Any suggestions? I want to add an external mouse drive DVD etc...

  Any help appreciated... Mark

  Hello

  Did you use the clean Toshiba Recovery CD to restore the operating system on your laptop or have you installed the operating system from the original Windows CD.
  I advise to use the Toshiba Recovery CD because all the driver and patches installed on this CD.

  The USB ports provide a current of 500 ma, and it is a standard. If several external devices connected to ports needs more power as 500mA, then it of possible that the laptop does not detect USB devices several.

  In Device Manager, you may turn off the power save the unique option to the USB ports.
  You can do this in the properties of the USB port

  Additional I advise to use a USB hub with external power clean.
  These devices are not very expensive and will allow you to connect and use several devices together.

• My HP 14 laptop is not recognizing the usb ports and wifi at startup.

  During the last few days I been dealing with the issue that my laptop does not recognize the usb ports and wifi. After several reboots, it works fine. My drivers are up to date, so I don't know why, I'll have this terrible problem.

  Welcome @hildergarn,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi and USB ports on your laptop from HP.

  My first suggestion would be to use the wireless network troubleshooting and Internet tool. At the bottom it will ask you questions to help you diagnose the problem.

  Please take a look at this great Charter called troubleshooting wireless network and Internet. This document will help you to solve the problem of Wi - Fi.

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  You have uninstalled the driver in Device Manager?

  Please try to uninstall the driver in Device Manager by using the following steps:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right-click on all NICs individually.
  • Click on uninstall.
  • Restart the laptop twice.

  How many devices you try to connect?

  What you are trying to connect via USB?

  Are - what you happened to try to use the HP Support Assistant?

  Here is a link to the HP Support Assistant, if you not him have not yet tried. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Here are other troubleshooting steps that may help too. If the USB device does not appear in Device Manager, then it might be a question of power requirement. Unplug the machine and perform the following steps until the device is detected:

  • Reboot the laptop

  • Plug in and wait five seconds.

  • If the device does not appear, try connecting to another USB port.

  • If the USB device is displayed in Device Manager after you connect the cable to a different port, then uninstall and reinstall the software of USB device driver.

  If the device is not recognized in any port, unplug it and go to the next step.

  • Open the Device Manager.

  • Double-click Bus USB controllers,

  • Double-click on a USB root hub,

  • Click the Power tab

  • Click on properties of power supply (if it is displayed).

  Devices need that are connected to the hub are shown, as well as the power they have. If the total displayed power is more than 500 mA, remove the devices and use a hub powered.

  • Continue looking at the properties of the power of each USB hub. If the total power required exceeds the total available power for the hub, then remove a device on this hub to a decrease in the number of consumption.

  • Plug in and wait five seconds. If the device is not recognized, unplug and go to the next step.

  Please note; Remove USB cables at high speed that are more than 3 m (9.8 ft) in length and use cables at high speed that are shorter than 3 m.

  Source: troubleshooting USB connections - please look at this document and follow all the steps in it.

  When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If please re-post and let me know the detailed results of all the troubleshooting steps in this post. Could you please provide me with your model number (How can I find my model number or product number?) also.

  Can't wait to hear from you!

  Have a great day!