Problem with validator
I have two TextFields, one for the user name and the other for password entry, and each of them has its corresponding validator in this way:
Page { property bool gState: false TextField { id: txtUsuario validator: Validator { id: usuariodValidator mode: ValidationMode.Custom errorMessage: "Debe especificar el usuario" onValidate: { var texto = txtUsuario.text; texto = Rutinas.trim(texto); gState = (texto.length > 0); } } } TextField { id: txtPassword validator: Validator { id: passwordValidator mode: ValidationMode.Custom errorMessage: "Debe especificar el password" onValidate: { var texto = txtPassword.text; texto = Rutinas.trim(texto); gState = (texto.length > 0); } } } And I have a button when I want to validate the fields Button { id: btnAceptar onClicked: { usuariodValidator.validate(); if (!gState) { return; } passwordValidator.validate(); if (!gState) { return; } toast.body = "OK"; toast.show(); } } }
When I saw the console I had two messages:
The line gState = (texto.length > 0); in txtUsuario onValidate
Asset: / / / hand. QML:103: error: Invalid write to global property "gState.
If the line (! gState) in onClicked button
Asset: / / / hand. QML:167: ReferenceError: can't find variable: gState
Try to define an id on the Page and to qualify the property name:
Page { id: page1 property bool gState: false ... page1.gState
Tags: BlackBerry Developers
Similar Questions
-
Deployment of HAProxy and ADF gives problem with validation
The problem:
On pages with forms that are used to populate a newly created line, all postings are triggered on the loading of the page with the result of messages for all the fields on the page until the user can start filling out the forms. This only happens behind the loadbalancer when deployment directly accessing everything seems to work.
When I say on the loading of the page, it isn't exactly on the loading of the page. Loading of the page and everything seems fine for a fraction of a second. However another application is launched and all validations are triggered. This request comes with and without loadbalancer. But it is only with validation when behind the loadbalancer.
The case:
1. create taskflow who in a method call, creates a new record and in a second time, show a form for this new line
2. create a jsf page that contains a box with A taskflow
(If you come from a page that has already initiated AOS error happens again here)
3. create taskflow B which is the same thing has to another VO, call taskflow taskflow A B.
Work half workaround solutions:
The only solution that seems to work a bit is to ensure that the form is the first page that launches a module of the application (or something vaguely akin to that?). But this still does not work, I need to look for it further how this affects exactly the problem.
Refresh the browser window allows the validation of messages disappear.
Defining field validations triggers only immediate so that fields of all other fields are triggered is no longer (at least on the page load)
The environment:
HAProxy Loadbalancer
ADF 11.1.2.3
WebLogic 10.3.6.0
I also logged a service request: 3-9991555971
Configuration of the HAProxy
listen to utastwlsdev
link 178.208.47.113:80
link 192.168.50.223:80
http mode
maxconn 65536
balance roundrobin
HTTPLOG option
option httpclose
option abortonclose
forwardfor except 178.208.47.19 option
Redirect 301 if https scheme code! {hdr(X-Forwarded-Proto)-i https}
appsession JSESSIONID len 52 3 h request timeout - learn prefix
#option httpchk HEAD/index.html HTTP/1.0
ErrorFile 503 /etc/haproxy/maintenance.html
Server wlsdev002_utastwlsdev2 inter 192.168.50.10:7003 verification 2000 fall 3 rise 2
Server wlsdev003_utastwlsdev3 inter 192.168.50.11:7003 verification 2000 fall 3 rise 2
Any advise on HAProxy configuration or how to debug this issue is welcome.
It seems that the problem is that some settings in the HAProxy removed the header "oracle.adf.view.rich.STOP_ACTIVE_DATA". When this header was not there he causes the phases 2 & 3 to be carried out for a bunch of requests and that lead to the postings. All the other things mentioned seem to be a coincidence.
-
Problem with Validator V3C on Dreamweaver CS 5.5
Hay,
I have a problem with V3c Validator on my Dreamweaver CS 5.5. If I used this tool, it does not work (file - validate - validate current Document (V3C)). Can someone help me to Difficulty ce problem?.
Thank you
The W3C has changed the location of the validator. Dreamweaver CS5.5 is no longer supported by Adobe, but you can manually change the URL in the Windows registry or Mac preferences. See the post below for more details: Re: 2015 CC Validation issues
-
problem with validation in the field with the radio button type in create profile jsp page
Hello
Kindly help me with the validation of a field with the type option button in the createProfile jsp page. Its actually not to validate the sex with radio button field.
The code is as follows...
< % @ page language = "java" contentType = text/html"; charset = ISO-8859-1"
pageEncoding = "ISO-8859-1" % >
<! – this taglib used to access dsp tags - >
< %@taglib uri = "" / dspTaglib "prefix ="dsp"% >"
< dsp:page >
< dsp:importbean bean = "/ atg/userprofiling/ProfileFormHandler" / >
< dsp:importbean bean = "/ atg/dynamo/drop/ErrorMessageForEach" / >
<! DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional / / IN" "http://www.w3.org/TR/html4/loose.dtd" > ""
< html >
< head >
< meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
< title > < /title > user registration Page
< / head >
< body >
< dsp:form id = "registerForm" method = "post" action = "registration.jsp" >
< div >
< div > if please fill in all fields below and click Save
button. < / div >
< br / >
< table >
< tbody >
< b >
< td width = "150" > name < table >
< td > < dsp:input bean = "ProfileFormHandler.value.firstName"
MaxLength = "30" size = "25" type = "text" required = "true" / > < table >
< /tr >
< b >
Last name < td > < table >
< td > < dsp:input bean = "ProfileFormHandler.value.lastName"
MaxLength = "30" size = "25" type = "text" required = "true" / > < table >
< /tr >
< b >
< td > username < table >
< td > < dsp:input bean = "ProfileFormHandler.value.login"
MaxLength = "30" size = "25" type = "text" required = "true" / > < table >
< /tr >
< b >
password < td > < table >
< td > < dsp:input bean = "ProfileFormHandler.value.password"
MaxLength = "30" size = "25" type = "password" required = "true" / > < table >
< /tr >
< b >
< td > confirm password < table >
< td > < dsp:input bean = "ProfileFormHandler.value.password"
MaxLength = "30" size = "25" type = "password" required = "true" / > < table >
< /tr >
< b >
Identification of Email < td > < table >
< td > < dsp:input bean = "ProfileFormHandler.value.email"
MaxLength = "30" size = "25" type = "text" required = "true" / > < table >
< /tr >
< b >
Sex < td > < table >
< td > < dsp:input bean = "ProfileFormHandler.value.gender"
Type = "radio" required = "true" > male < / dsp:input > < dsp:input
Bean = "ProfileFormHandler.Value.Gender" type = "radio" "
required = "true" > female < / dsp:input > < table >
< /tr >
< b >
< td colspan = "2" > < dsp:input bean = "ProfileFormHandler.create"
Type = "submit" value = "Save" / > < dsp:input
Bean = "ProfileFormHandler.createSuccessURL" type = "hidden"
value = "index.jsp" / > < table > "
< /tr >
< b >
< td colspan = "2" >
< ul >
< dsp:droplet name = "ErrorMessageForEach" >
< dsp:param bean = "ProfileFormHandler.formExceptions"
name = 'exceptions' / >
< name dsp:oparam = "output" >
< li > < dsp:valueof param = "message" / > < /li >
< / dsp:oparam >
< / dsp:droplet >
< /ul >
< table >
< /tr >
< / tbody >
< /table >
< / div >
< / dsp:form >
< / dsp:page >
< / body >
< / html >
Use code next, may be you do not value attribute set and causing a problem (data inconsistency problem) or case mismatch while storing data in the repository.
<%Boolean checked = true;%>
Sex: Male
Female
I do not know what will radio back button if the value is specified: a boolean value or the value aim to display (in your male cases),.
If the problem is fixed, undo the change and please let me know what value he sent in your case.
Please
Thank you
Nitin.
-
Problem with validation popup function and af bean.
I have the following code from the model:
View1.JSPX contains a popup with 2 text entry. the text of entry has a custom validator (is not allowing the user to enter text containing 'A'):
The validation function is contained in a bean managed with a scope of application:<?xml version='1.0' encoding='UTF-8'?> <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"> <jsp:directive.page contentType="text/html;charset=UTF-8"/> <f:view> <af:document id="d1"> <af:form id="f1"> <af:commandButton text="Show Popup" id="cb1"> <af:showPopupBehavior popupId="p1Adauga2"/> </af:commandButton> <af:popup id="p1Adauga2"> <af:panelWindow id="pw2" title="Adauga entitate la lista"> <af:panelGroupLayout id="pgl7" layout="horizontal" halign="center" valign="top"> <af:panelFormLayout id="pfl1"> <af:inputText label="text1:" maximumLength="10" id="it11" rendered="true" validator="#{TestBean.validateText1}" autoSubmit="true"> </af:inputText> <af:inputText label="text2:" maximumLength="10" id="it9" rendered="true"> </af:inputText> </af:panelFormLayout> <af:spacer width="10" height="30" id="s7"/> </af:panelGroupLayout> <af:panelGroupLayout id="pgl8" layout="horizontal" valign="bottom" halign="center"> <af:commandButton text="Add" id="cb11Adauga"/> <af:spacer width="10" height="30" id="s9"/> </af:panelGroupLayout> </af:panelWindow> </af:popup> </af:form> </af:document> </f:view> </jsp:root>
My problem:import javax.faces.application.FacesMessage; import javax.faces.component.UIComponent; import javax.faces.context.FacesContext; import oracle.adf.view.rich.component.rich.input.RichInputText; public class TestBean { public TestBean() { } public void validateText1(FacesContext facesContext, UIComponent uIComponent, Object object) { String val = (String) object; if (val.contains("A")) { FacesMessage message = new FacesMessage(FacesMessage.SEVERITY_ERROR, "Eroare", "Cannot contain A"); facesContext.addMessage(uIComponent.getClientId(facesContext), message); ((RichInputText)uIComponent).setValid(false); } } }
1. I enter invalid text
2. an error message is displayed, saying that that text I put in place is not valid.
3. I press the Add - button the popup is closed. Why? The component is not valid. Shouldn't the blocked popup until all text entry are valid?
How to achieve this.
Please see the screenshot below, it better describes my problem:
Published by: Andrei Ciobanu on 12 Aug 2011 06:16
Published by: Andrei Ciobanu on 12 Aug 2011 06:19You should read the documentation of af: popup [http://download.oracle.com/docs/cd/E16162_01/apirefs.1112/e17491/tagdoc/af_popup.html url] and understand everything about auto-licenciement
-
a space problem with validation css
Hi all
I validate my CSS and received the following WARNING
83 . Header Containing an area of family names are cited. If quoting is omitted, all characters in space before and after the name are ignored and any sequence of characters of white space inside the name is converted to a single space.
The site is designed with Dw CS4, so I don't know what to do with it. I suspect that this means by giving me my one maincontent div background color, but there seems to be a white space that surrounds the content. In any case, if Googlebot sees this as a problem my site may not be indexed.I'm new to this any help would be welcome.
Hi westewell,
You have posted this message in the Adobe BrowserLab forum, so I move to the Dreamweaver forum for an answer... but I think I know the cause of the problem.
"Family names containing spaces must be quoted. If quoting is omitted, all characters in space before and after the name are ignored and any sequence of characters of white space inside the name is converted to a single space of. »
This is warning refers to font family names as they are written in your CSS stylesheet. Family names that contain a space white/spaces between words must be enclosed in quotes. For example, you will receive the warning if your rule looks like this:
. Header {}
do-family: Georgia, Times New Roman, Times, serif;
}
When it should look like this:
. Header {}
do-family: Georgia, "Times New Roman", Times, serif;
}
If that doesn't help not solve your problem, please post a link to your page that generates the validation warning, or include your code in your response.
Best regards
CoreyPost edited by: Corey@Adobe corrected typos
-
problem with validation after downgrading to windows 10 back to windows 7.
My windows 7 has been posted before I did the update. What should I do now? Before, I decided to go back to windows 7, I was in the process (at the suggestion of Microsoft) update my windows 10 driver. I stopped when I saw that they were demanding money. It was one of these "30 days offers free trial." After that I spent in windows 7 I checked my download folder and found 2 configuration files for windows 10 drivers. I deleted those. Shortly after that I have got a saying my Windows 7 must be validated. I did and it showed the my windows 7 is not legitimate... did that three times and he still come as my windows 7 could not be validated. Now I can't make any updates.
Thank you
Monika
Hello
Please contact Microsoft Community.
The problem description, I understand that you have downgraded your PC for windows 7 and now you got thie message. Please correct me if I'm wrong.
I suggest you refer to the suggestion given by Andre Da Costa in the mentioned link:
I hope this helps.
Kind regards
Anusha -
I went from one ploygon is and I'm now getting a validation error. The error is 13351 indicating the crossing, but makes no sense since the geometry has changed only to become bigger. No changes were made to the difference between the ring and the polygon.
-Geometry valid
POLYGON ((-135.0 30,5,-134.99185 30.041386,-134.98405 30.034086,-134.95401 30.005964,-134.94765 30,0,-133.5 30,0,-133.5 30,5,-135.0 30,5), (-134.14302 30.005978,-134.15857 30.006021 - 134.1741 30.006367-, 134.18962 30.007006 - 134.20514 30.00795-, 134.22061 30.009184 - 134.23605 30.010723-, 30.012556 - 134.2668 30.014683 - 134.25145, 134.28804 30.019129 - 134.3007 30.02694-, 30.036272 - 134.32144 30.046923 - 134.31192, 134.32907 30.05866 - 134.33464 30.071234-, 30.084389 - 134.33902 30.097822 - 134.33798, 134.33699 30.111183 - 134.33412 30.124422-, 30.1375 - 134.3264 30.1505 - 134.33043, 134.32031 30.162872)) ,-134.31268 30.174572 - 134.30228 30.184523-, 134.28958 30.192234 - 134.27316 30.1978-, 134.228 30.207745 - 134.1761 30.2131-, 134.12085 30.212633 - 134.04973 30.202162-, 133.9964 30.189205 - 133.9541 30.17085-, 133.9415 30.162994 - 133.9309 30.153177-, 133.92265 30.141773 - 133.91707 30.129238-, 133.91539 30.115883 - 133.91785 30.102583-, 133.92172 30.089539 - 133.92686 30.076834-, 133.9339 30.064833 - 133.94272 30.053745-, 30.043777 - 133.96469 30.034756 - 133.95316, 133.97697 30.026539 - 133.9909 30.0206-, 30.016367 - 134.03474 30.014029 - 134.01944, 134.0501 30.01199 - 134.0655 30.010244-, 30.008795 - 134.09645 30.007645 - 134.08096, 134.11195 30.006788-134.12749 30.006233 (,-134.14302 30.005978))
-Invalid geometry, (only differences is polygon is shifted is)
POLYGON ((-135.0 30,5,-134.99185 30.041386,-134.98405 30.034086,-134.95401 30.005964,-134.94765 30,0,-132.0 30,0,-132.0 30,5,-135.0 30,5), (-134.14302 30.005978,-134.15857 30.006021 - 134.1741 30.006367-, 134.18962 30.007006 - 134.20514 30.00795-, 134.22061 30.009184 - 134.23605 30.010723-, 30.012556 - 134.2668 30.014683 - 134.25145, 134.28804 30.019129 - 134.3007 30.02694-, 30.036272 - 134.32144 30.046923 - 134.31192, 134.32907 30.05866 - 134.33464 30.071234-, 30.084389 - 134.33902 30.097822 - 134.33798, 134.33699 30.111183 - 134.33412 30.124422-, 30.1375 - 134.3264 30.1505 - 134.33043, 134.32031 30.162872)) ,-134.31268 30.174572 - 134.30228 30.184523-, 134.28958 30.192234 - 134.27316 30.1978-, 134.228 30.207745 - 134.1761 30.2131-, 134.12085 30.212633 - 134.04973 30.202162-, 133.9964 30.189205 - 133.9541 30.17085-, 133.9415 30.162994 - 133.9309 30.153177-, 133.92265 30.141773 - 133.91707 30.129238-, 133.91539 30.115883 - 133.91785 30.102583-, 133.92172 30.089539 - 133.92686 30.076834-, 133.9339 30.064833 - 133.94272 30.053745-, 30.043777 - 133.96469 30.034756 - 133.95316, 133.97697 30.026539 - 133.9909 30.0206-, 30.016367 - 134.03474 30.014029 - 134.01944, 134.0501 30.01199 - 134.0655 30.010244-, 30.008795 - 134.09645 30.007645 - 134.08096, 134.11195 30.006788-134.12749 30.006233 (,-134.14302 30.005978))
Hello the number of name-less 1064020,
Oracle spatial determines the validity of your GEODESIC geometry on the sphere, not a flat surface. So in your original geometry that is large enough, the distance between the hole and the outer edge is only 447 meters. As stretch you the outer ring of the geometry (you will double the size of it) of the lower edge of geometry "hiking upward" along the curve of the Earth. However, the hole is anchored by many peaks to be where you placed it. So, there's a point where they begin to cross.
This is the measure of the gap before and after your stretching.
WITH geometries AS ( SELECT MDSYS.SDO_UTIL.POLYGONTOLINE(MDSYS.SDO_UTIL.EXTRACT(a.original,1,1)) AS original_outer ,MDSYS.SDO_UTIL.POLYGONTOLINE(MDSYS.SDO_UTIL.EXTRACT(a.original,1,2)) AS original_hole ,MDSYS.SDO_UTIL.POLYGONTOLINE(MDSYS.SDO_UTIL.EXTRACT(a.stretched,1,1)) AS stretched_outer ,MDSYS.SDO_UTIL.POLYGONTOLINE(MDSYS.SDO_UTIL.EXTRACT(a.stretched,1,2)) AS stretched_hole FROM ( SELECT MDSYS.SDO_GEOMETRY('POLYGON ((-135.0 30.5,-134.99185 30.041386,-134.98405 30.034086,-134.95401 30.005964,-134.94765 30.0,-133.5 30.0,-133.5 30.5, -135.0 30.5),( -134.14302 30.005978,-134.15857 30.006021,-134.1741 30.006367,-134.18962 30.007006,-134.20514 30.00795,-134.22061 30.009184,-134.23605 30.010723,-134.25145 30.012556,-134.2668 30.014683,-134.28804 30.019129,-134.3007 30.02694,-134.31192 30.036272,-134.32144 30.046923,-134.32907 30.05866,-134.33464 30.071234,-134.33798 30.084389,-134.33902 30.097822,-134.33699 30.111183,-134.33412 30.124422,-134.33043 30.1375,-134.3264 30.1505,-134.32031 30.162872,-134.31268 30.174572,-134.30228 30.184523,-134.28958 30.192234,-134.27316 30.1978,-134.228 30.207745,-134.1761 30.2131,-134.12085 30.212633,-134.04973 30.202162,-133.9964 30.189205,-133.9541 30.17085,-133.9415 30.162994,-133.9309 30.153177,-133.92265 30.141773,-133.91707 30.129238,-133.91539 30.115883,-133.91785 30.102583,-133.92172 30.089539,-133.92686 30.076834,-133.9339 30.064833,-133.94272 30.053745,-133.95316 30.043777,-133.96469 30.034756,-133.97697 30.026539,-133.9909 30.0206,-134.01944 30.016367,-134.03474 30.014029,-134.0501 30.01199,-134.0655 30.010244,-134.08096 30.008795,-134.09645 30.007645,-134.11195 30.006788,-134.12749 30.006233,-134.14302 30.005978))',8265) AS original ,MDSYS.SDO_GEOMETRY('POLYGON ((-135.0 30.5,-134.99185 30.041386,-134.98405 30.034086,-134.95401 30.005964,-134.94765 30.0,-132.0 30.0,-132.0 30.5, -135.0 30.5),( -134.14302 30.005978,-134.15857 30.006021,-134.1741 30.006367,-134.18962 30.007006,-134.20514 30.00795,-134.22061 30.009184,-134.23605 30.010723,-134.25145 30.012556,-134.2668 30.014683,-134.28804 30.019129,-134.3007 30.02694,-134.31192 30.036272,-134.32144 30.046923,-134.32907 30.05866,-134.33464 30.071234,-134.33798 30.084389,-134.33902 30.097822,-134.33699 30.111183,-134.33412 30.124422,-134.33043 30.1375,-134.3264 30.1505,-134.32031 30.162872,-134.31268 30.174572,-134.30228 30.184523,-134.28958 30.192234,-134.27316 30.1978,-134.228 30.207745,-134.1761 30.2131,-134.12085 30.212633,-134.04973 30.202162,-133.9964 30.189205,-133.9541 30.17085,-133.9415 30.162994,-133.9309 30.153177,-133.92265 30.141773,-133.91707 30.129238,-133.91539 30.115883,-133.91785 30.102583,-133.92172 30.089539,-133.92686 30.076834,-133.9339 30.064833,-133.94272 30.053745,-133.95316 30.043777,-133.96469 30.034756,-133.97697 30.026539,-133.9909 30.0206,-134.01944 30.016367,-134.03474 30.014029,-134.0501 30.01199,-134.0655 30.010244,-134.08096 30.008795,-134.09645 30.007645,-134.11195 30.006788,-134.12749 30.006233,-134.14302 30.005978))',8265) AS stretched FROM dual ) a ) SELECT MDSYS.SDO_GEOM.SDO_DISTANCE(a.original_outer,a.original_hole,0.05) AS original_gap ,MDSYS.SDO_GEOM.SDO_DISTANCE(a.stretched_outer,a.stretched_hole,0.05) AS stretched_gap FROM geometries a;
If you wish to change your geometries in this way, you must use a projected coordinate system. You can also simply densify your GEODESIC geometry by adding more points along the long edges of the polygon.
This happens from time to time on the forum, I searched on a good explanation online but couldn't find something simple. Someone else has a link to 1064020?
See you soon,.
Paul
-
I have a form with 4 drop boxes, all are required:
Divisions
DEPARTMENT AND THE CENTRE REGION
DEPARTMENT FOUDATION
RESEARCH DEPARTMENT
Divisions DD user must select a single value.
If the value of the Division's Center can:
Department AND the CENTRE - visible
DEPARTMENT FOUDATION - invisible
DEPARTMENT RESEARCH - invisible
If the value of Division is Foudation then:
Department AND the CENTRE - invisible
DEPARTMENT FOUDATION - visible
DEPARTMENT RESEARCH - invisible
If value sharing research then:
Department AND the CENTRE - invisible
DEPARTMENT FOUDATION - invisible
DEPARTMENT RESEARCH - visible
My problem is when I select a value of division and then a value from the Department SD button (Function) EMAIL does not work
because I get the message that the other two fields (are empty).
Where can I send my form so someone can check?
Thank you
Here is the updated form to update...
Two things, I corrected...
(1) you do not send the return value of the global function "Ex1ValidFields" when the required field is not respected.
(2) in the email button if you are checking in for true service you do not wrap all code after the 'If' condition flower brackets. "{}"..
If you don't put parentheses around the code after the if condition, only the first line is affected with the condition If. That means incase your if condition fails, the first line will not run, but the rest of the code will continue to run... I placed brackets around all of the code in the code for the Send button.
You don't need Reg expressions to check the empty character in this situation. By simply using the rawValue can help.
https://acrobat.com/#d=ACLWW * m6lJzXgl2jz1GEnA https://Acrobat.com/#d=4lZAUYsCfe1vJOjDnzZ0uQ
Thank you
Srini
-
Problem with validation when you manually download updates
My automatic update has failed repeatedly to 5 updates (kb905866) (kb2545698) (kb2530548) (kb2533623) (kb2541763).
I tried to download them manually.
4 of them say required validation and when I click on continue I'm going to a window that says windows genuine validation, click on continue again and it takes me to the microsoft.com/windows page.
From there, nothing about the validation or how to pursue my update.
I am very confused.
I have validated my windows and it is authentic.
Hello
thry will help you there
and I hope that you get it solved
-
Problem with validation of invoices in AP
When I book an invoice a / P and after I enter in the details of a line point and post the Bill, I have the following error "enter the desired value for the segment of Actual_Expense in the invoice lines flexfield." Please tell us how I can solve this problem. Thanks, Massoud
One of the segment in the Bill for DFF to line level is required (mandatory). Either provide a value in this segment to move forward or go to configuration of FDF and uncheck the 'Compulsory' for this segment.
-
ADF 11 g: problem with validation InputText
Hello
I have a text input. its source is as below:
"< * af:inputText maximumLength ="8"label =" * "
* Binding = "#{backing_Main.iptxt_MinTemprature}" *.
* id = "iptxt_MinTemprature" columns = "16."
* converter = "javax.faces.Double" autoTab = 'true' * ' "
* autoSubmit = "true."
* valueChangeListener = "#{backing_Main.onChangeRecalulate}" *.
* immediate = "true" / >. *
whenever there is any change of value function onChangeRecalulate (valueChangeListener) is called.
here in the function onChangeRecalulate (valueChangeListener) when I'm reading the value entered in above text entry, it shows me as null, despite value entered.
If I remove valueChangeListener then I am able to read the value of another input text does not.
Please help on this.
I need the valueChange Listener on this text entry to perform some calculations as soon as the user changes the value.
Thanks in advance
Concerning
Romain RousselgetNewValue() method is available on ValueChangeEvent, try this:
public void onChangeRecalulate(ValueChangeEvent valueChangeEvent) { System.out.println("Entered Value: "+valueChangeEvent.getNewValue); //Write your code here }
Jean Lou
-
Original title: error Windows 7 installation files
I bought a copy of Windows 7 at Tiger Direct on 22/05/2014. I lost my copy and I tried to download the iso from the Microsoft web site, but my product key is not valid. I get this error message
We had a problem with the request for approval.
See for other directions:
http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-update/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2
-
Problem with windows7 "NVCPL. DLL not a win32 application valid?
Problem with windows 7. I get the following message to start upward. "NVCPL.COM" an application not valid win 32. Try to install Microsoft
FSX. It won't install even though it appears in the control panel being installed. Finally, I just uninstalled the program. I came from Radio Shack in the original packaging for a Microsoft it checked with the appropriate product key. Any thoughts would be greatly appreciated.
Bill Foushee
Looks like this file belongs to Nvidia video drivers. Uninstall, and then go to the Nvidia website download again. Then reinstall them using
-
Problem with page validation APEX_APPLICATion master detail. Help!
I'm having a problem with the Apex_Application.g_fxx data structure. I'm trying to validate the lines in my page master detail and need to use apex_application.g_f10 as the name of the variable inside the HTML data source electricity. The name of the item I need is "f10" because it matches the database column "status" on my page. I'm trying to validate that all the detail items have the same status, or an error is reported. I use the following PL/SQL block that returns a Boolean value:
< code >
declare
l_first_value varchar2 (4000);
Start-f10 = column PO_STATUS of PO_DETAILS table on a part as a table on the page.
l_first_value: = apex_application.g_f10 (1);
because me in 2... apex_application.g_f10. COUNTY
loop
If l_first_value! = apex_application.g_f10 (i)
then
Returns false;
end if;
end loop;
Returns true;
end;
< code >The HTML data that I is not intended to "f10" are the following:
< code >
< td headers= "Status" class= "t20data" >
< label for= "f10_0000" class= "hideMeButHearMe" >status< /label>
< Select name="f10" id="f10_0000">
< option value= "" selected= "selected" >make a selection< /option> ""
< option value= 'APPROVED' >APPROVED< /option>
< option valeur= « FERMÉ » >FERMÉ< /option>
</ Select >
< entry type="hidden" name="f02" value="" id="f02_0000" />
< entry type="hidden" name="f03" value="30427" id="f03_0000" />
< entry type= 'hidden' id= "fcs_0000" name= "fcs" value= "2158A9B101842608F4CA966C0BC1433D" >
< entry type="hidden" id="frowid_0000" name="frowid" value="" />
< entry type="hidden" id="fcud_0000" name="fcud" value="D" />
</ td >
< code >
So I do not know why there could be a problem when used to work before this validation. The PL/SQL block takes the first line of F10 data and compare it to successive lines. If the data is not equal, then an error occurs and the user is prompted to adjust the data.
It doesn't work anymore, although I checked and the status are still of points in F10.
I left mouth gaping. I do not use an official page master detail previously. I used two separate front pages: one for the header and one for show master detail. I've updated the page for the treatment of the more fluid user. I think that even if the data structure would be the same, but maybe I'm wrong.
Any ideas?
Thank you!Thank you to reproduce the problem so overall. Note that if you will share your workspace in this way you need to change your username to something else than a direct email address and don't use not the actual data for your test cases. Create a guest account to developer without administrator privileges to work space for the members of the forum to use.
Validation in this app is coded to use a different picture of the description in this thread. Above, you have identified the point like g_f10 dashboard, but the validation code is using g_f09:
declare l_first_value varchar2(4000); begin -- f09 = PO_STATUS column of PO_DETAILS table l_first_value := apex_application.g_f09(1); for i in 2 .. apex_application.g_f09.COUNT loop if l_first_value != apex_application.g_f09(i) then return false; end if; end loop; return true; end;
Therefore (thanks to instrumentation code added), the validation is running by using the values of the previous column, which was be the one that I have changed according to your instructions:
0.09114
0,00018
... Posting type "Status check IN." -: FUNC_BODY_RETURNING_BOOLEAN
4
0%
0.09132
0,00049
... Run the statement: select count (*) in the sys.dual where exists (Select 1 from PO_DETAILS where PO_ID =: P230_PO_ID)
4
0 g
0.09181
0,00015
...... Result = true
4
0%
0.09196
0.00573
... Run the statement: declare function x return boolean is begin declare
l_first_value varchar2 (4000);
Start
-f09 = PO_STATUS table PO_DETAILS column
l_first_value: = apex_application.g_f09 (1);
apex_debug.message ('g_f09 (1): %s, l_first_value);
because me in 2... apex_application.g_f09. COUNTY
loop
(apex_debug.message('g_f09(%s): %s, i, apex_application.g_f09 (i));
If l_first_value! = apex_application.g_f09 (i)
then
Returns false;
end if;
end loop;
Returns true;
end;
Returns a null value. end; begin wwv_flow.g_boolean: = x; end;
4
28%
0.09769
0.00005
g_f09 (1): TEST2
4
0%
0.09773
0.00010
g_f09 (2): TEST
4
0%
0.09783
0,00003
...... Result = false
4
0%
0.09786
0.00004
...... Does NOT pass
I created a new liquidation which uses the correct column, but at some point the validation passes and data, so I didn't get a chance to conduct tests.
Maybe you are looking for
-
When Firefox starts first of all, I have my home page the value: newtab. When loading, it loads a blank page. However, when I click on the new tab, a page with all of my frequently visited sites appears. I want the site visited freq tiles is displaye
-
Windows 7 Media Center - stuttering/video freezing while playing Internet TV
I recently installed "clean" Windows 7 Edition Home Premium on XP MCE 2005. I have serious problems with the video stuttering and freezing frequently during playback of the titles of Internet TV, for example, old episodes of Star Trek. Results ofte
-
ALS IP Cisco 2901 and POLITICS with dual gateways LAN-based ROUTING
Hello I am configuring a failover solution combined with the ACB using two bridges already configured. See the attached diagram. I currently have two ASA 5505 and a 2901. According to the example: http://www.firewall.cx/cisco-technical-knowledgebase/
-
How to remove decimal and trailing zeros for obscure currencies?
I'm working on layouts for my business of quoting system. We quote products globally.I'm fine with formatting of major currencies, but the Korean currency left me speechless.I need to remove the decimal point and two zeros to the right if the currenc
-
Load since excellent data to Oracle Tables
Hi all I want to create a table with the payment year as default sysdate (to_char(sysdate,'yyyy')) and months in the form 'MM' (as default payment_month < (syadate, 'MM') > I'm doing it in vain. Help me please, and the other is want to load data from